| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* KVM paravirtual clock driver. A clocksource implementation | |
| Copyright (C) 2008 Glauber de Oliveira Costa, Red Hat Inc. | |
| */ | |
| #include <linux/clocksource.h> | |
| #include <linux/kvm_para.h> | |
| #include <asm/pvclock.h> | |
| #include <asm/msr.h> | |
| #include <asm/apic.h> | |
| #include <linux/percpu.h> | |
| #include <linux/hardirq.h> | |
| #include <linux/cpuhotplug.h> | |
| #include <linux/sched.h> | |
| #include <linux/sched/clock.h> | |
| #include <linux/mm.h> | |
| #include <linux/slab.h> | |
| #include <linux/set_memory.h> | |
| #include <linux/cc_platform.h> | |
| #include <asm/hypervisor.h> | |
| #include <asm/timer.h> | |
| #include <asm/x86_init.h> | |
| #include <asm/kvmclock.h> | |
| static int kvmclock __initdata = 1; | |
| static int kvmclock_vsyscall __initdata = 1; | |
| static int msr_kvm_system_time __ro_after_init; | |
| static int msr_kvm_wall_clock __ro_after_init; | |
| static u64 kvm_sched_clock_offset __ro_after_init; | |
| static int __init parse_no_kvmclock(char *arg) | |
| { | |
| kvmclock = 0; | |
| return 0; | |
| } | |
| early_param("no-kvmclock", parse_no_kvmclock); | |
| static int __init parse_no_kvmclock_vsyscall(char *arg) | |
| { | |
| kvmclock_vsyscall = 0; | |
| return 0; | |
| } | |
| early_param("no-kvmclock-vsyscall", parse_no_kvmclock_vsyscall); | |
| /* Aligned to page sizes to match what's mapped via vsyscalls to userspace */ | |
| #define HVC_BOOT_ARRAY_SIZE \ | |
| (PAGE_SIZE / sizeof(struct pvclock_vsyscall_time_info)) | |
| static struct pvclock_vsyscall_time_info | |
| hv_clock_boot[HVC_BOOT_ARRAY_SIZE] __bss_decrypted __aligned(PAGE_SIZE); | |
| static struct pvclock_wall_clock wall_clock __bss_decrypted; | |
| static struct pvclock_vsyscall_time_info *hvclock_mem; | |
| DEFINE_PER_CPU(struct pvclock_vsyscall_time_info *, hv_clock_per_cpu); | |
| EXPORT_PER_CPU_SYMBOL_GPL(hv_clock_per_cpu); | |
| /* | |
| * The wallclock is the time of day when we booted. Since then, some time may | |
| * have elapsed since the hypervisor wrote the data. So we try to account for | |
| * that with system time | |
| */ | |
| static void kvm_get_wallclock(struct timespec64 *now) | |
| { | |
| wrmsrq(msr_kvm_wall_clock, slow_virt_to_phys(&wall_clock)); | |
| preempt_disable(); | |
| pvclock_read_wallclock(&wall_clock, this_cpu_pvti(), now); | |
| preempt_enable(); | |
| } | |
| static int kvm_set_wallclock(const struct timespec64 *now) | |
| { | |
| return -ENODEV; | |
| } | |
| static u64 kvm_clock_read(void) | |
| { | |
| u64 ret; | |
| preempt_disable_notrace(); | |
| ret = pvclock_clocksource_read_nowd(this_cpu_pvti()); | |
| preempt_enable_notrace(); | |
| return ret; | |
| } | |
| static u64 kvm_clock_get_cycles(struct clocksource *cs) | |
| { | |
| return kvm_clock_read(); | |
| } | |
| static u64 kvm_clock_get_cycles_snapshot(struct clocksource *cs, | |
| struct clocksource_hw_snapshot *chs) | |
| { | |
| struct pvclock_vcpu_time_info *src; | |
| unsigned version; | |
| u64 ret, tsc; | |
| preempt_disable_notrace(); | |
| src = this_cpu_pvti(); | |
| do { | |
| version = pvclock_read_begin(src); | |
| tsc = rdtsc_ordered(); | |
| ret = __pvclock_read_cycles(src, tsc); | |
| } while (pvclock_read_retry(src, version)); | |
| preempt_enable_notrace(); | |
| chs->hw_cycles = tsc; | |
| chs->hw_csid = CSID_X86_TSC; | |
| return ret; | |
| } | |
| static noinstr u64 kvm_sched_clock_read(void) | |
| { | |
| return pvclock_clocksource_read_nowd(this_cpu_pvti()) - kvm_sched_clock_offset; | |
| } | |
| static inline void kvm_sched_clock_init(bool stable) | |
| { | |
| if (!stable) | |
| clear_sched_clock_stable(); | |
| kvm_sched_clock_offset = kvm_clock_read(); | |
| paravirt_set_sched_clock(kvm_sched_clock_read); | |
| pr_info("kvm-clock: using sched offset of %llu cycles", | |
| kvm_sched_clock_offset); | |
| BUILD_BUG_ON(sizeof(kvm_sched_clock_offset) > | |
| sizeof(((struct pvclock_vcpu_time_info *)NULL)->system_time)); | |
| } | |
| /* | |
| * If we don't do that, there is the possibility that the guest | |
| * will calibrate under heavy load - thus, getting a lower lpj - | |
| * and execute the delays themselves without load. This is wrong, | |
| * because no delay loop can finish beforehand. | |
| * Any heuristics is subject to fail, because ultimately, a large | |
| * poll of guests can be running and trouble each other. So we preset | |
| * lpj here | |
| */ | |
| static unsigned long kvm_get_tsc_khz(void) | |
| { | |
| setup_force_cpu_cap(X86_FEATURE_TSC_KNOWN_FREQ); | |
| return pvclock_tsc_khz(this_cpu_pvti()); | |
| } | |
| static void __init kvm_get_preset_lpj(void) | |
| { | |
| unsigned long khz; | |
| u64 lpj; | |
| khz = kvm_get_tsc_khz(); | |
| lpj = ((u64)khz * 1000); | |
| do_div(lpj, HZ); | |
| preset_lpj = lpj; | |
| } | |
| bool kvm_check_and_clear_guest_paused(void) | |
| { | |
| struct pvclock_vsyscall_time_info *src = this_cpu_hvclock(); | |
| bool ret = false; | |
| if (!src) | |
| return ret; | |
| if ((src->pvti.flags & PVCLOCK_GUEST_STOPPED) != 0) { | |
| src->pvti.flags &= ~PVCLOCK_GUEST_STOPPED; | |
| pvclock_touch_watchdogs(); | |
| ret = true; | |
| } | |
| return ret; | |
| } | |
| static int kvm_cs_enable(struct clocksource *cs) | |
| { | |
| vclocks_set_used(VDSO_CLOCKMODE_PVCLOCK); | |
| return 0; | |
| } | |
| static struct clocksource kvm_clock = { | |
| .name = "kvm-clock", | |
| .read = kvm_clock_get_cycles, | |
| .read_snapshot = kvm_clock_get_cycles_snapshot, | |
| .rating = 400, | |
| .mask = CLOCKSOURCE_MASK(64), | |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS, | |
| .id = CSID_X86_KVM_CLK, | |
| .enable = kvm_cs_enable, | |
| }; | |
| static void kvm_register_clock(char *txt) | |
| { | |
| struct pvclock_vsyscall_time_info *src = this_cpu_hvclock(); | |
| u64 pa; | |
| if (!src) | |
| return; | |
| pa = slow_virt_to_phys(&src->pvti) | 0x01ULL; | |
| wrmsrq(msr_kvm_system_time, pa); | |
| pr_debug("kvm-clock: cpu %d, msr %llx, %s", smp_processor_id(), pa, txt); | |
| } | |
| static void kvm_save_sched_clock_state(void) | |
| { | |
| } | |
| static void kvm_restore_sched_clock_state(void) | |
| { | |
| kvm_register_clock("primary cpu clock, resume"); | |
| } | |
| #ifdef CONFIG_X86_LOCAL_APIC | |
| static void kvm_setup_secondary_clock(void) | |
| { | |
| kvm_register_clock("secondary cpu clock"); | |
| } | |
| #endif | |
| void kvmclock_disable(void) | |
| { | |
| if (msr_kvm_system_time) | |
| native_write_msr(msr_kvm_system_time, 0); | |
| } | |
| static void __init kvmclock_init_mem(void) | |
| { | |
| unsigned long ncpus; | |
| unsigned int order; | |
| struct page *p; | |
| int r; | |
| if (HVC_BOOT_ARRAY_SIZE >= num_possible_cpus()) | |
| return; | |
| ncpus = num_possible_cpus() - HVC_BOOT_ARRAY_SIZE; | |
| order = get_order(ncpus * sizeof(*hvclock_mem)); | |
| p = alloc_pages(GFP_KERNEL, order); | |
| if (!p) { | |
| pr_warn("%s: failed to alloc %d pages", __func__, (1U << order)); | |
| return; | |
| } | |
| hvclock_mem = page_address(p); | |
| /* | |
| * hvclock is shared between the guest and the hypervisor, must | |
| * be mapped decrypted. | |
| */ | |
| if (cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT)) { | |
| r = set_memory_decrypted((unsigned long) hvclock_mem, | |
| 1UL << order); | |
| if (r) { | |
| __free_pages(p, order); | |
| hvclock_mem = NULL; | |
| pr_warn("kvmclock: set_memory_decrypted() failed. Disabling\n"); | |
| return; | |
| } | |
| } | |
| memset(hvclock_mem, 0, PAGE_SIZE << order); | |
| } | |
| static int __init kvm_setup_vsyscall_timeinfo(void) | |
| { | |
| if (!kvm_para_available() || !kvmclock || nopv) | |
| return 0; | |
| kvmclock_init_mem(); | |
| #ifdef CONFIG_X86_64 | |
| if (per_cpu(hv_clock_per_cpu, 0) && kvmclock_vsyscall) { | |
| u8 flags; | |
| flags = pvclock_read_flags(&hv_clock_boot[0].pvti); | |
| if (!(flags & PVCLOCK_TSC_STABLE_BIT)) | |
| return 0; | |
| kvm_clock.vdso_clock_mode = VDSO_CLOCKMODE_PVCLOCK; | |
| } | |
| #endif | |
| return 0; | |
| } | |
| early_initcall(kvm_setup_vsyscall_timeinfo); | |
| static int kvmclock_setup_percpu(unsigned int cpu) | |
| { | |
| struct pvclock_vsyscall_time_info *p = per_cpu(hv_clock_per_cpu, cpu); | |
| /* | |
| * The per cpu area setup replicates CPU0 data to all cpu | |
| * pointers. So carefully check. CPU0 has been set up in init | |
| * already. | |
| */ | |
| if (!cpu || (p && p != per_cpu(hv_clock_per_cpu, 0))) | |
| return 0; | |
| /* Use the static page for the first CPUs, allocate otherwise */ | |
| if (cpu < HVC_BOOT_ARRAY_SIZE) | |
| p = &hv_clock_boot[cpu]; | |
| else if (hvclock_mem) | |
| p = hvclock_mem + cpu - HVC_BOOT_ARRAY_SIZE; | |
| else | |
| return -ENOMEM; | |
| per_cpu(hv_clock_per_cpu, cpu) = p; | |
| return p ? 0 : -ENOMEM; | |
| } | |
| void __init kvmclock_init(void) | |
| { | |
| u8 flags; | |
| if (!kvm_para_available() || !kvmclock) | |
| return; | |
| if (kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE2)) { | |
| msr_kvm_system_time = MSR_KVM_SYSTEM_TIME_NEW; | |
| msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK_NEW; | |
| } else if (kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE)) { | |
| msr_kvm_system_time = MSR_KVM_SYSTEM_TIME; | |
| msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK; | |
| } else { | |
| return; | |
| } | |
| if (cpuhp_setup_state(CPUHP_BP_PREPARE_DYN, "kvmclock:setup_percpu", | |
| kvmclock_setup_percpu, NULL) < 0) { | |
| return; | |
| } | |
| pr_info("kvm-clock: Using msrs %x and %x", | |
| msr_kvm_system_time, msr_kvm_wall_clock); | |
| this_cpu_write(hv_clock_per_cpu, &hv_clock_boot[0]); | |
| kvm_register_clock("primary cpu clock"); | |
| pvclock_set_pvti_cpu0_va(hv_clock_boot); | |
| if (kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE_STABLE_BIT)) | |
| pvclock_set_flags(PVCLOCK_TSC_STABLE_BIT); | |
| flags = pvclock_read_flags(&hv_clock_boot[0].pvti); | |
| kvm_sched_clock_init(flags & PVCLOCK_TSC_STABLE_BIT); | |
| x86_platform.calibrate_tsc = kvm_get_tsc_khz; | |
| x86_platform.calibrate_cpu = kvm_get_tsc_khz; | |
| x86_platform.get_wallclock = kvm_get_wallclock; | |
| x86_platform.set_wallclock = kvm_set_wallclock; | |
| #ifdef CONFIG_X86_LOCAL_APIC | |
| x86_cpuinit.early_percpu_clock_init = kvm_setup_secondary_clock; | |
| #endif | |
| x86_platform.save_sched_clock_state = kvm_save_sched_clock_state; | |
| x86_platform.restore_sched_clock_state = kvm_restore_sched_clock_state; | |
| kvm_get_preset_lpj(); | |
| /* | |
| * X86_FEATURE_NONSTOP_TSC is TSC runs at constant rate | |
| * with P/T states and does not stop in deep C-states. | |
| * | |
| * Invariant TSC exposed by host means kvmclock is not necessary: | |
| * can use TSC as clocksource. | |
| * | |
| */ | |
| if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC) && | |
| boot_cpu_has(X86_FEATURE_NONSTOP_TSC) && | |
| !check_tsc_unstable()) | |
| kvm_clock.rating = 299; | |
| clocksource_register_hz(&kvm_clock, NSEC_PER_SEC); | |
| pv_info.name = "KVM"; | |
| } |