| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * linux/arch/i386/kernel/head32.c -- prepare to run common code | |
| * | |
| * Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE | |
| * Copyright (C) 2007 Eric Biederman <ebiederm@xmission.com> | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/start_kernel.h> | |
| #include <linux/mm.h> | |
| #include <linux/memblock.h> | |
| #include <asm/desc.h> | |
| #include <asm/setup.h> | |
| #include <asm/sections.h> | |
| #include <asm/e820/api.h> | |
| #include <asm/page.h> | |
| #include <asm/apic.h> | |
| #include <asm/io_apic.h> | |
| #include <asm/bios_ebda.h> | |
| #include <asm/microcode.h> | |
| #include <asm/tlbflush.h> | |
| #include <asm/bootparam_utils.h> | |
| static void __init i386_default_early_setup(void) | |
| { | |
| /* Initialize 32bit specific setup functions */ | |
| x86_init.resources.reserve_resources = i386_reserve_resources; | |
| x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc; | |
| } | |
| #ifdef CONFIG_MICROCODE_INITRD32 | |
| unsigned long __initdata initrd_start_early; | |
| static pte_t __initdata *initrd_pl2p_start, *initrd_pl2p_end; | |
| static void zap_early_initrd_mapping(void) | |
| { | |
| pte_t *pl2p = initrd_pl2p_start; | |
| for (; pl2p < initrd_pl2p_end; pl2p++) { | |
| *pl2p = (pte_t){ .pte = 0 }; | |
| if (!IS_ENABLED(CONFIG_X86_PAE)) | |
| *(pl2p + ((PAGE_OFFSET >> PGDIR_SHIFT))) = (pte_t) {.pte = 0}; | |
| } | |
| } | |
| #else | |
| static inline void zap_early_initrd_mapping(void) { } | |
| #endif | |
| asmlinkage __visible void __init __noreturn i386_start_kernel(void) | |
| { | |
| /* Make sure IDT is set up before any exception happens */ | |
| idt_setup_early_handler(); | |
| load_ucode_bsp(); | |
| zap_early_initrd_mapping(); | |
| cr4_init_shadow(); | |
| sanitize_boot_params(&boot_params); | |
| x86_early_init_platform_quirks(); | |
| /* Call the subarch specific early setup function */ | |
| switch (boot_params.hdr.hardware_subarch) { | |
| case X86_SUBARCH_INTEL_MID: | |
| x86_intel_mid_early_setup(); | |
| break; | |
| case X86_SUBARCH_CE4100: | |
| x86_ce4100_early_setup(); | |
| break; | |
| default: | |
| i386_default_early_setup(); | |
| break; | |
| } | |
| start_kernel(); | |
| } | |
| /* | |
| * Initialize page tables. This creates a PDE and a set of page | |
| * tables, which are located immediately beyond __brk_base. The variable | |
| * _brk_end is set up to point to the first "safe" location. | |
| * Mappings are created both at virtual address 0 (identity mapping) | |
| * and PAGE_OFFSET for up to _end. | |
| * | |
| * In PAE mode initial_page_table is statically defined to contain | |
| * enough entries to cover the VMSPLIT option (that is the top 1, 2 or 3 | |
| * entries). The identity mapping is handled by pointing two PGD entries | |
| * to the first kernel PMD. Note the upper half of each PMD or PTE are | |
| * always zero at this stage. | |
| */ | |
| #ifdef CONFIG_X86_PAE | |
| typedef pmd_t pl2_t; | |
| #define pl2_base initial_pg_pmd | |
| #define SET_PL2(val) { .pmd = (val), } | |
| #else | |
| typedef pgd_t pl2_t; | |
| #define pl2_base initial_page_table | |
| #define SET_PL2(val) { .pgd = (val), } | |
| #endif | |
| static __init __no_stack_protector pte_t init_map(pte_t pte, pte_t **ptep, pl2_t **pl2p, | |
| const unsigned long limit) | |
| { | |
| while ((pte.pte & PTE_PFN_MASK) < limit) { | |
| pl2_t pl2 = SET_PL2((unsigned long)*ptep | PDE_IDENT_ATTR); | |
| int i; | |
| **pl2p = pl2; | |
| if (!IS_ENABLED(CONFIG_X86_PAE)) { | |
| /* Kernel PDE entry */ | |
| *(*pl2p + ((PAGE_OFFSET >> PGDIR_SHIFT))) = pl2; | |
| } | |
| for (i = 0; i < PTRS_PER_PTE; i++) { | |
| **ptep = pte; | |
| pte.pte += PAGE_SIZE; | |
| (*ptep)++; | |
| } | |
| (*pl2p)++; | |
| } | |
| return pte; | |
| } | |
| void __init __no_stack_protector mk_early_pgtbl_32(void) | |
| { | |
| /* Enough space to fit pagetables for the low memory linear map */ | |
| unsigned long limit = __pa_nodebug(_end) + (PAGE_TABLE_SIZE(LOWMEM_PAGES) << PAGE_SHIFT); | |
| pte_t pte, *ptep = (pte_t *)__pa_nodebug(__brk_base); | |
| struct boot_params __maybe_unused *params; | |
| pl2_t *pl2p = (pl2_t *)__pa_nodebug(pl2_base); | |
| unsigned long *ptr; | |
| pte.pte = PTE_IDENT_ATTR; | |
| pte = init_map(pte, &ptep, &pl2p, limit); | |
| ptr = (unsigned long *)__pa_nodebug(&max_pfn_mapped); | |
| /* Can't use pte_pfn() since it's a call with CONFIG_PARAVIRT */ | |
| *ptr = (pte.pte & PTE_PFN_MASK) >> PAGE_SHIFT; | |
| ptr = (unsigned long *)__pa_nodebug(&_brk_end); | |
| *ptr = (unsigned long)ptep + PAGE_OFFSET; | |
| #ifdef CONFIG_MICROCODE_INITRD32 | |
| params = (struct boot_params *)__pa_nodebug(&boot_params); | |
| if (!params->hdr.ramdisk_size || !params->hdr.ramdisk_image) | |
| return; | |
| /* Save the virtual start address */ | |
| ptr = (unsigned long *)__pa_nodebug(&initrd_start_early); | |
| *ptr = (pte.pte & PTE_PFN_MASK) + PAGE_OFFSET; | |
| *ptr += ((unsigned long)params->hdr.ramdisk_image) & ~PAGE_MASK; | |
| /* Save PLP2 for cleanup */ | |
| ptr = (unsigned long *)__pa_nodebug(&initrd_pl2p_start); | |
| *ptr = (unsigned long)pl2p + PAGE_OFFSET; | |
| limit = (unsigned long)params->hdr.ramdisk_image; | |
| pte.pte = PTE_IDENT_ATTR | PFN_ALIGN(limit); | |
| limit = (unsigned long)params->hdr.ramdisk_image + params->hdr.ramdisk_size; | |
| init_map(pte, &ptep, &pl2p, limit); | |
| ptr = (unsigned long *)__pa_nodebug(&initrd_pl2p_end); | |
| *ptr = (unsigned long)pl2p + PAGE_OFFSET; | |
| #endif | |
| } |