| // SPDX-License-Identifier: GPL-2.0 | |
| #include <linux/init.h> | |
| #include <linux/mm.h> | |
| #include <asm/mtrr.h> | |
| #include <asm/msr.h> | |
| #include "mtrr.h" | |
| static void | |
| amd_get_mtrr(unsigned int reg, unsigned long *base, | |
| unsigned long *size, mtrr_type *type) | |
| { | |
| unsigned long val; | |
| struct msr msr; | |
| rdmsrq(MSR_K6_UWCCR, msr.q); | |
| /* Upper dword is region 1, lower is region 0 */ | |
| if (reg == 1) | |
| val = msr.h; | |
| else | |
| val = msr.l; | |
| /* The base masks off on the right alignment */ | |
| *base = (val & 0xFFFE0000) >> PAGE_SHIFT; | |
| *type = 0; | |
| if (val & 1) | |
| *type = MTRR_TYPE_UNCACHABLE; | |
| if (val & 2) | |
| *type = MTRR_TYPE_WRCOMB; | |
| if (!(val & 3)) { | |
| *size = 0; | |
| return; | |
| } | |
| /* | |
| * This needs a little explaining. The size is stored as an | |
| * inverted mask of bits of 128K granularity 15 bits long offset | |
| * 2 bits. | |
| * | |
| * So to get a size we do invert the mask and add 1 to the lowest | |
| * mask bit (4 as its 2 bits in). This gives us a size we then shift | |
| * to turn into 128K blocks. | |
| * | |
| * eg 111 1111 1111 1100 is 512K | |
| * | |
| * invert 000 0000 0000 0011 | |
| * +1 000 0000 0000 0100 | |
| * *128K ... | |
| */ | |
| val = (~val) & 0x1FFFC; | |
| *size = (val + 4) << (15 - PAGE_SHIFT); | |
| } | |
| /** | |
| * amd_set_mtrr - Set variable MTRR register on the local CPU. | |
| * | |
| * @reg The register to set. | |
| * @base The base address of the region. | |
| * @size The size of the region. If this is 0 the region is disabled. | |
| * @type The type of the region. | |
| * | |
| * Returns nothing. | |
| */ | |
| static void | |
| amd_set_mtrr(unsigned int reg, unsigned long base, unsigned long size, mtrr_type type) | |
| { | |
| struct msr msr; | |
| u32 regs[2]; | |
| /* | |
| * Low is MTRR0, High MTRR 1 | |
| */ | |
| rdmsrq(MSR_K6_UWCCR, msr.q); | |
| regs[0] = msr.l; | |
| regs[1] = msr.h; | |
| /* | |
| * Blank to disable | |
| */ | |
| if (size == 0) { | |
| regs[reg] = 0; | |
| } else { | |
| /* | |
| * Set the register to the base, the type (off by one) and an | |
| * inverted bitmask of the size The size is the only odd | |
| * bit. We are fed say 512K We invert this and we get 111 1111 | |
| * 1111 1011 but if you subtract one and invert you get the | |
| * desired 111 1111 1111 1100 mask | |
| * | |
| * But ~(x - 1) == ~x + 1 == -x. Two's complement rocks! | |
| */ | |
| regs[reg] = (-size >> (15 - PAGE_SHIFT) & 0x0001FFFC) | |
| | (base << PAGE_SHIFT) | (type + 1); | |
| } | |
| /* | |
| * The writeback rule is quite specific. See the manual. Its | |
| * disable local interrupts, write back the cache, set the mtrr | |
| */ | |
| wbinvd(); | |
| msr.l = regs[0]; | |
| msr.h = regs[1]; | |
| wrmsrq(MSR_K6_UWCCR, msr.q); | |
| } | |
| static int | |
| amd_validate_add_page(unsigned long base, unsigned long size, unsigned int type) | |
| { | |
| /* | |
| * Apply the K6 block alignment and size rules | |
| * In order | |
| * o Uncached or gathering only | |
| * o 128K or bigger block | |
| * o Power of 2 block | |
| * o base suitably aligned to the power | |
| */ | |
| if (type > MTRR_TYPE_WRCOMB || size < (1 << (17 - PAGE_SHIFT)) | |
| || (size & ~(size - 1)) - size || (base & (size - 1))) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| const struct mtrr_ops amd_mtrr_ops = { | |
| .var_regs = 2, | |
| .set = amd_set_mtrr, | |
| .get = amd_get_mtrr, | |
| .get_free_region = generic_get_free_region, | |
| .validate_add_page = amd_validate_add_page, | |
| .have_wrcomb = positive_have_wrcomb, | |
| }; |