| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Intel IO-APIC support for multi-Pentium hosts. | |
| * | |
| * Copyright (C) 1997, 1998, 1999, 2000, 2009 Ingo Molnar, Hajnalka Szabo | |
| * | |
| * Many thanks to Stig Venaas for trying out countless experimental | |
| * patches and reporting/debugging problems patiently! | |
| * | |
| * (c) 1999, Multiple IO-APIC support, developed by | |
| * Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and | |
| * Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>, | |
| * further tested and cleaned up by Zach Brown <zab@redhat.com> | |
| * and Ingo Molnar <mingo@redhat.com> | |
| * | |
| * Fixes | |
| * Maciej W. Rozycki : Bits for genuine 82489DX APICs; | |
| * thanks to Eric Gilmore | |
| * and Rolf G. Tews | |
| * for testing these extensively | |
| * Paul Diefenbaugh : Added full ACPI support | |
| * | |
| * Historical information which is worth to be preserved: | |
| * | |
| * - SiS APIC rmw bug: | |
| * | |
| * We used to have a workaround for a bug in SiS chips which | |
| * required to rewrite the index register for a read-modify-write | |
| * operation as the chip lost the index information which was | |
| * setup for the read already. We cache the data now, so that | |
| * workaround has been removed. | |
| */ | |
| #include <linux/mm.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/irq.h> | |
| #include <linux/init.h> | |
| #include <linux/delay.h> | |
| #include <linux/sched.h> | |
| #include <linux/pci.h> | |
| #include <linux/mc146818rtc.h> | |
| #include <linux/compiler.h> | |
| #include <linux/acpi.h> | |
| #include <linux/export.h> | |
| #include <linux/syscore_ops.h> | |
| #include <linux/freezer.h> | |
| #include <linux/kthread.h> | |
| #include <linux/jiffies.h> /* time_after() */ | |
| #include <linux/slab.h> | |
| #include <linux/memblock.h> | |
| #include <linux/msi.h> | |
| #include <asm/irqdomain.h> | |
| #include <asm/io.h> | |
| #include <asm/smp.h> | |
| #include <asm/cpu.h> | |
| #include <asm/desc.h> | |
| #include <asm/proto.h> | |
| #include <asm/acpi.h> | |
| #include <asm/dma.h> | |
| #include <asm/timer.h> | |
| #include <asm/time.h> | |
| #include <asm/i8259.h> | |
| #include <asm/setup.h> | |
| #include <asm/irq_remapping.h> | |
| #include <asm/hw_irq.h> | |
| #include <asm/apic.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/x86_init.h> | |
| #define for_each_ioapic(idx) \ | |
| for ((idx) = 0; (idx) < nr_ioapics; (idx)++) | |
| #define for_each_ioapic_reverse(idx) \ | |
| for ((idx) = nr_ioapics - 1; (idx) >= 0; (idx)--) | |
| #define for_each_pin(idx, pin) \ | |
| for ((pin) = 0; (pin) < ioapics[(idx)].nr_registers; (pin)++) | |
| #define for_each_ioapic_pin(idx, pin) \ | |
| for_each_ioapic((idx)) \ | |
| for_each_pin((idx), (pin)) | |
| #define for_each_irq_pin(entry, head) \ | |
| list_for_each_entry(entry, &head, list) | |
| static DEFINE_RAW_SPINLOCK(ioapic_lock); | |
| static DEFINE_MUTEX(ioapic_mutex); | |
| static unsigned int ioapic_dynirq_base; | |
| static int ioapic_initialized; | |
| struct irq_pin_list { | |
| struct list_head list; | |
| int apic, pin; | |
| }; | |
| struct mp_chip_data { | |
| struct list_head irq_2_pin; | |
| struct IO_APIC_route_entry entry; | |
| bool is_level; | |
| bool active_low; | |
| bool isa_irq; | |
| u32 count; | |
| }; | |
| struct mp_ioapic_gsi { | |
| u32 gsi_base; | |
| u32 gsi_end; | |
| }; | |
| static struct ioapic { | |
| /* # of IRQ routing registers */ | |
| int nr_registers; | |
| /* Saved state during suspend/resume, or while enabling intr-remap. */ | |
| struct IO_APIC_route_entry *saved_registers; | |
| /* I/O APIC config */ | |
| struct mpc_ioapic mp_config; | |
| /* IO APIC gsi routing info */ | |
| struct mp_ioapic_gsi gsi_config; | |
| struct ioapic_domain_cfg irqdomain_cfg; | |
| struct irq_domain *irqdomain; | |
| struct resource *iomem_res; | |
| } ioapics[MAX_IO_APICS]; | |
| #define mpc_ioapic_ver(ioapic_idx) ioapics[ioapic_idx].mp_config.apicver | |
| int mpc_ioapic_id(int ioapic_idx) | |
| { | |
| return ioapics[ioapic_idx].mp_config.apicid; | |
| } | |
| unsigned int mpc_ioapic_addr(int ioapic_idx) | |
| { | |
| return ioapics[ioapic_idx].mp_config.apicaddr; | |
| } | |
| static inline struct mp_ioapic_gsi *mp_ioapic_gsi_routing(int ioapic_idx) | |
| { | |
| return &ioapics[ioapic_idx].gsi_config; | |
| } | |
| static inline int mp_ioapic_pin_count(int ioapic) | |
| { | |
| struct mp_ioapic_gsi *gsi_cfg = mp_ioapic_gsi_routing(ioapic); | |
| return gsi_cfg->gsi_end - gsi_cfg->gsi_base + 1; | |
| } | |
| static inline u32 mp_pin_to_gsi(int ioapic, int pin) | |
| { | |
| return mp_ioapic_gsi_routing(ioapic)->gsi_base + pin; | |
| } | |
| static inline bool mp_is_legacy_irq(int irq) | |
| { | |
| return irq >= 0 && irq < nr_legacy_irqs(); | |
| } | |
| static inline struct irq_domain *mp_ioapic_irqdomain(int ioapic) | |
| { | |
| return ioapics[ioapic].irqdomain; | |
| } | |
| int nr_ioapics; | |
| /* The one past the highest gsi number used */ | |
| u32 gsi_top; | |
| /* MP IRQ source entries */ | |
| struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES]; | |
| /* # of MP IRQ source entries */ | |
| int mp_irq_entries; | |
| #ifdef CONFIG_EISA | |
| int mp_bus_id_to_type[MAX_MP_BUSSES]; | |
| #endif | |
| DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); | |
| bool ioapic_is_disabled __ro_after_init; | |
| /** | |
| * disable_ioapic_support() - disables ioapic support at runtime | |
| */ | |
| void disable_ioapic_support(void) | |
| { | |
| #ifdef CONFIG_PCI | |
| noioapicquirk = 1; | |
| noioapicreroute = -1; | |
| #endif | |
| ioapic_is_disabled = true; | |
| } | |
| static int __init parse_noapic(char *str) | |
| { | |
| /* disable IO-APIC */ | |
| disable_ioapic_support(); | |
| return 0; | |
| } | |
| early_param("noapic", parse_noapic); | |
| /* Will be called in mpparse/ACPI codes for saving IRQ info */ | |
| void mp_save_irq(struct mpc_intsrc *m) | |
| { | |
| int i; | |
| apic_pr_verbose("Int: type %d, pol %d, trig %d, bus %02x, IRQ %02x, APIC ID %x, APIC INT %02x\n", | |
| m->irqtype, m->irqflag & 3, (m->irqflag >> 2) & 3, m->srcbus, | |
| m->srcbusirq, m->dstapic, m->dstirq); | |
| for (i = 0; i < mp_irq_entries; i++) { | |
| if (!memcmp(&mp_irqs[i], m, sizeof(*m))) | |
| return; | |
| } | |
| memcpy(&mp_irqs[mp_irq_entries], m, sizeof(*m)); | |
| if (++mp_irq_entries == MAX_IRQ_SOURCES) | |
| panic("Max # of irq sources exceeded!!\n"); | |
| } | |
| static void alloc_ioapic_saved_registers(int idx) | |
| { | |
| size_t size; | |
| if (ioapics[idx].saved_registers) | |
| return; | |
| size = sizeof(struct IO_APIC_route_entry) * ioapics[idx].nr_registers; | |
| ioapics[idx].saved_registers = kzalloc(size, GFP_KERNEL); | |
| if (!ioapics[idx].saved_registers) | |
| pr_err("IOAPIC %d: suspend/resume impossible!\n", idx); | |
| } | |
| static void free_ioapic_saved_registers(int idx) | |
| { | |
| kfree(ioapics[idx].saved_registers); | |
| ioapics[idx].saved_registers = NULL; | |
| } | |
| int __init arch_early_ioapic_init(void) | |
| { | |
| int i; | |
| if (!nr_legacy_irqs()) | |
| io_apic_irqs = ~0UL; | |
| for_each_ioapic(i) | |
| alloc_ioapic_saved_registers(i); | |
| return 0; | |
| } | |
| struct io_apic { | |
| unsigned int index; | |
| unsigned int unused[3]; | |
| unsigned int data; | |
| unsigned int unused2[11]; | |
| unsigned int eoi; | |
| }; | |
| static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx) | |
| { | |
| return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx) | |
| + (mpc_ioapic_addr(idx) & ~PAGE_MASK); | |
| } | |
| static inline void io_apic_eoi(unsigned int apic, unsigned int vector) | |
| { | |
| struct io_apic __iomem *io_apic = io_apic_base(apic); | |
| writel(vector, &io_apic->eoi); | |
| } | |
| unsigned int native_io_apic_read(unsigned int apic, unsigned int reg) | |
| { | |
| struct io_apic __iomem *io_apic = io_apic_base(apic); | |
| writel(reg, &io_apic->index); | |
| return readl(&io_apic->data); | |
| } | |
| static void io_apic_write(unsigned int apic, unsigned int reg, | |
| unsigned int value) | |
| { | |
| struct io_apic __iomem *io_apic = io_apic_base(apic); | |
| writel(reg, &io_apic->index); | |
| writel(value, &io_apic->data); | |
| } | |
| static struct IO_APIC_route_entry __ioapic_read_entry(int apic, int pin) | |
| { | |
| struct IO_APIC_route_entry entry; | |
| entry.w1 = io_apic_read(apic, 0x10 + 2 * pin); | |
| entry.w2 = io_apic_read(apic, 0x11 + 2 * pin); | |
| return entry; | |
| } | |
| static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin) | |
| { | |
| guard(raw_spinlock_irqsave)(&ioapic_lock); | |
| return __ioapic_read_entry(apic, pin); | |
| } | |
| /* | |
| * When we write a new IO APIC routing entry, we need to write the high | |
| * word first! If the mask bit in the low word is clear, we will enable | |
| * the interrupt, and we need to make sure the entry is fully populated | |
| * before that happens. | |
| */ | |
| static void __ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) | |
| { | |
| io_apic_write(apic, 0x11 + 2*pin, e.w2); | |
| io_apic_write(apic, 0x10 + 2*pin, e.w1); | |
| } | |
| static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) | |
| { | |
| guard(raw_spinlock_irqsave)(&ioapic_lock); | |
| __ioapic_write_entry(apic, pin, e); | |
| } | |
| /* | |
| * When we mask an IO APIC routing entry, we need to write the low | |
| * word first, in order to set the mask bit before we change the | |
| * high bits! | |
| */ | |
| static void ioapic_mask_entry(int apic, int pin) | |
| { | |
| struct IO_APIC_route_entry e = { .masked = true }; | |
| guard(raw_spinlock_irqsave)(&ioapic_lock); | |
| io_apic_write(apic, 0x10 + 2*pin, e.w1); | |
| io_apic_write(apic, 0x11 + 2*pin, e.w2); | |
| } | |
| /* | |
| * The common case is 1:1 IRQ<->pin mappings. Sometimes there are | |
| * shared ISA-space IRQs, so we have to support them. We are super | |
| * fast in the common case, and fast for shared ISA-space IRQs. | |
| */ | |
| static bool add_pin_to_irq_node(struct mp_chip_data *data, int node, int apic, int pin) | |
| { | |
| struct irq_pin_list *entry; | |
| /* Don't allow duplicates */ | |
| for_each_irq_pin(entry, data->irq_2_pin) { | |
| if (entry->apic == apic && entry->pin == pin) | |
| return true; | |
| } | |
| entry = kzalloc_node(sizeof(struct irq_pin_list), GFP_ATOMIC, node); | |
| if (!entry) { | |
| pr_err("Cannot allocate irq_pin_list (%d,%d,%d)\n", node, apic, pin); | |
| return false; | |
| } | |
| entry->apic = apic; | |
| entry->pin = pin; | |
| list_add_tail(&entry->list, &data->irq_2_pin); | |
| return true; | |
| } | |
| static void __remove_pin_from_irq(struct mp_chip_data *data, int apic, int pin) | |
| { | |
| struct irq_pin_list *tmp, *entry; | |
| list_for_each_entry_safe(entry, tmp, &data->irq_2_pin, list) { | |
| if (entry->apic == apic && entry->pin == pin) { | |
| list_del(&entry->list); | |
| kfree(entry); | |
| return; | |
| } | |
| } | |
| } | |
| static void io_apic_modify_irq(struct mp_chip_data *data, bool masked, | |
| void (*final)(struct irq_pin_list *entry)) | |
| { | |
| struct irq_pin_list *entry; | |
| data->entry.masked = masked; | |
| for_each_irq_pin(entry, data->irq_2_pin) { | |
| io_apic_write(entry->apic, 0x10 + 2 * entry->pin, data->entry.w1); | |
| if (final) | |
| final(entry); | |
| } | |
| } | |
| /* | |
| * Synchronize the IO-APIC and the CPU by doing a dummy read from the | |
| * IO-APIC | |
| */ | |
| static void io_apic_sync(struct irq_pin_list *entry) | |
| { | |
| struct io_apic __iomem *io_apic; | |
| io_apic = io_apic_base(entry->apic); | |
| readl(&io_apic->data); | |
| } | |
| static void mask_ioapic_irq(struct irq_data *irq_data) | |
| { | |
| struct mp_chip_data *data = irq_data->chip_data; | |
| guard(raw_spinlock_irqsave)(&ioapic_lock); | |
| io_apic_modify_irq(data, true, &io_apic_sync); | |
| } | |
| static void __unmask_ioapic(struct mp_chip_data *data) | |
| { | |
| io_apic_modify_irq(data, false, NULL); | |
| } | |
| static void unmask_ioapic_irq(struct irq_data *irq_data) | |
| { | |
| struct mp_chip_data *data = irq_data->chip_data; | |
| guard(raw_spinlock_irqsave)(&ioapic_lock); | |
| __unmask_ioapic(data); | |
| } | |
| /* | |
| * IO-APIC versions below 0x20 don't support EOI register. | |
| * For the record, here is the information about various versions: | |
| * 0Xh 82489DX | |
| * 1Xh I/OAPIC or I/O(x)APIC which are not PCI 2.2 Compliant | |
| * 2Xh I/O(x)APIC which is PCI 2.2 Compliant | |
| * 30h-FFh Reserved | |
| * | |
| * Some of the Intel ICH Specs (ICH2 to ICH5) documents the io-apic | |
| * version as 0x2. This is an error with documentation and these ICH chips | |
| * use io-apic's of version 0x20. | |
| * | |
| * For IO-APIC's with EOI register, we use that to do an explicit EOI. | |
| * Otherwise, we simulate the EOI message manually by changing the trigger | |
| * mode to edge and then back to level, with RTE being masked during this. | |
| */ | |
| static void __eoi_ioapic_pin(int apic, int pin, int vector) | |
| { | |
| if (mpc_ioapic_ver(apic) >= 0x20) { | |
| io_apic_eoi(apic, vector); | |
| } else { | |
| struct IO_APIC_route_entry entry, entry1; | |
| entry = entry1 = __ioapic_read_entry(apic, pin); | |
| /* Mask the entry and change the trigger mode to edge. */ | |
| entry1.masked = true; | |
| entry1.is_level = false; | |
| __ioapic_write_entry(apic, pin, entry1); | |
| /* Restore the previous level triggered entry. */ | |
| __ioapic_write_entry(apic, pin, entry); | |
| } | |
| } | |
| static void eoi_ioapic_pin(int vector, struct mp_chip_data *data) | |
| { | |
| struct irq_pin_list *entry; | |
| guard(raw_spinlock_irqsave)(&ioapic_lock); | |
| for_each_irq_pin(entry, data->irq_2_pin) | |
| __eoi_ioapic_pin(entry->apic, entry->pin, vector); | |
| } | |
| static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) | |
| { | |
| struct IO_APIC_route_entry entry; | |
| /* Check delivery_mode to be sure we're not clearing an SMI pin */ | |
| entry = ioapic_read_entry(apic, pin); | |
| if (entry.delivery_mode == APIC_DELIVERY_MODE_SMI) | |
| return; | |
| /* | |
| * Make sure the entry is masked and re-read the contents to check | |
| * if it is a level triggered pin and if the remote-IRR is set. | |
| */ | |
| if (!entry.masked) { | |
| entry.masked = true; | |
| ioapic_write_entry(apic, pin, entry); | |
| entry = ioapic_read_entry(apic, pin); | |
| } | |
| if (entry.irr) { | |
| /* | |
| * Make sure the trigger mode is set to level. Explicit EOI | |
| * doesn't clear the remote-IRR if the trigger mode is not | |
| * set to level. | |
| */ | |
| if (!entry.is_level) { | |
| entry.is_level = true; | |
| ioapic_write_entry(apic, pin, entry); | |
| } | |
| guard(raw_spinlock_irqsave)(&ioapic_lock); | |
| __eoi_ioapic_pin(apic, pin, entry.vector); | |
| } | |
| /* | |
| * Clear the rest of the bits in the IO-APIC RTE except for the mask | |
| * bit. | |
| */ | |
| ioapic_mask_entry(apic, pin); | |
| entry = ioapic_read_entry(apic, pin); | |
| if (entry.irr) | |
| pr_err("Unable to reset IRR for apic: %d, pin :%d\n", | |
| mpc_ioapic_id(apic), pin); | |
| } | |
| void clear_IO_APIC (void) | |
| { | |
| int apic, pin; | |
| for_each_ioapic_pin(apic, pin) | |
| clear_IO_APIC_pin(apic, pin); | |
| } | |
| #ifdef CONFIG_X86_32 | |
| /* | |
| * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to | |
| * specific CPU-side IRQs. | |
| */ | |
| #define MAX_PIRQS 8 | |
| static int pirq_entries[MAX_PIRQS] = { | |
| [0 ... MAX_PIRQS - 1] = -1 | |
| }; | |
| static int __init ioapic_pirq_setup(char *str) | |
| { | |
| int i, max, ints[MAX_PIRQS+1]; | |
| get_options(str, ARRAY_SIZE(ints), ints); | |
| apic_pr_verbose("PIRQ redirection, working around broken MP-BIOS.\n"); | |
| max = MAX_PIRQS; | |
| if (ints[0] < MAX_PIRQS) | |
| max = ints[0]; | |
| for (i = 0; i < max; i++) { | |
| apic_pr_verbose("... PIRQ%d -> IRQ %d\n", i, ints[i + 1]); | |
| /* PIRQs are mapped upside down, usually */ | |
| pirq_entries[MAX_PIRQS-i-1] = ints[i+1]; | |
| } | |
| return 1; | |
| } | |
| __setup("pirq=", ioapic_pirq_setup); | |
| #endif /* CONFIG_X86_32 */ | |
| /* | |
| * Saves all the IO-APIC RTE's | |
| */ | |
| int save_ioapic_entries(void) | |
| { | |
| int apic, pin; | |
| int err = 0; | |
| for_each_ioapic(apic) { | |
| if (!ioapics[apic].saved_registers) { | |
| err = -ENOMEM; | |
| continue; | |
| } | |
| for_each_pin(apic, pin) | |
| ioapics[apic].saved_registers[pin] = ioapic_read_entry(apic, pin); | |
| } | |
| return err; | |
| } | |
| /* | |
| * Mask all IO APIC entries. | |
| */ | |
| void mask_ioapic_entries(void) | |
| { | |
| int apic, pin; | |
| for_each_ioapic(apic) { | |
| if (!ioapics[apic].saved_registers) | |
| continue; | |
| for_each_pin(apic, pin) { | |
| struct IO_APIC_route_entry entry; | |
| entry = ioapics[apic].saved_registers[pin]; | |
| if (!entry.masked) { | |
| entry.masked = true; | |
| ioapic_write_entry(apic, pin, entry); | |
| } | |
| } | |
| } | |
| } | |
| /* | |
| * Restore IO APIC entries which was saved in the ioapic structure. | |
| */ | |
| int restore_ioapic_entries(void) | |
| { | |
| int apic, pin; | |
| for_each_ioapic(apic) { | |
| if (!ioapics[apic].saved_registers) | |
| continue; | |
| for_each_pin(apic, pin) | |
| ioapic_write_entry(apic, pin, ioapics[apic].saved_registers[pin]); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Find the IRQ entry number of a certain pin. | |
| */ | |
| static int find_irq_entry(int ioapic_idx, int pin, int type) | |
| { | |
| int i; | |
| for (i = 0; i < mp_irq_entries; i++) { | |
| if (mp_irqs[i].irqtype == type && | |
| (mp_irqs[i].dstapic == mpc_ioapic_id(ioapic_idx) || | |
| mp_irqs[i].dstapic == MP_APIC_ALL) && | |
| mp_irqs[i].dstirq == pin) | |
| return i; | |
| } | |
| return -1; | |
| } | |
| /* | |
| * Find the pin to which IRQ[irq] (ISA) is connected | |
| */ | |
| static int __init find_isa_irq_pin(int irq, int type) | |
| { | |
| int i; | |
| for (i = 0; i < mp_irq_entries; i++) { | |
| int lbus = mp_irqs[i].srcbus; | |
| if (test_bit(lbus, mp_bus_not_pci) && (mp_irqs[i].irqtype == type) && | |
| (mp_irqs[i].srcbusirq == irq)) | |
| return mp_irqs[i].dstirq; | |
| } | |
| return -1; | |
| } | |
| static int __init find_isa_irq_apic(int irq, int type) | |
| { | |
| int i; | |
| for (i = 0; i < mp_irq_entries; i++) { | |
| int lbus = mp_irqs[i].srcbus; | |
| if (test_bit(lbus, mp_bus_not_pci) && (mp_irqs[i].irqtype == type) && | |
| (mp_irqs[i].srcbusirq == irq)) | |
| break; | |
| } | |
| if (i < mp_irq_entries) { | |
| int ioapic_idx; | |
| for_each_ioapic(ioapic_idx) { | |
| if (mpc_ioapic_id(ioapic_idx) == mp_irqs[i].dstapic) | |
| return ioapic_idx; | |
| } | |
| } | |
| return -1; | |
| } | |
| static bool irq_active_low(int idx) | |
| { | |
| int bus = mp_irqs[idx].srcbus; | |
| /* | |
| * Determine IRQ line polarity (high active or low active): | |
| */ | |
| switch (mp_irqs[idx].irqflag & MP_IRQPOL_MASK) { | |
| case MP_IRQPOL_DEFAULT: | |
| /* | |
| * Conforms to spec, ie. bus-type dependent polarity. PCI | |
| * defaults to low active. [E]ISA defaults to high active. | |
| */ | |
| return !test_bit(bus, mp_bus_not_pci); | |
| case MP_IRQPOL_ACTIVE_HIGH: | |
| return false; | |
| case MP_IRQPOL_RESERVED: | |
| pr_warn("IOAPIC: Invalid polarity: 2, defaulting to low\n"); | |
| fallthrough; | |
| case MP_IRQPOL_ACTIVE_LOW: | |
| default: /* Pointless default required due to do gcc stupidity */ | |
| return true; | |
| } | |
| } | |
| #ifdef CONFIG_EISA | |
| /* | |
| * EISA Edge/Level control register, ELCR | |
| */ | |
| static bool EISA_ELCR(unsigned int irq) | |
| { | |
| if (irq < nr_legacy_irqs()) { | |
| unsigned int port = PIC_ELCR1 + (irq >> 3); | |
| return (inb(port) >> (irq & 7)) & 1; | |
| } | |
| apic_pr_verbose("Broken MPtable reports ISA irq %d\n", irq); | |
| return false; | |
| } | |
| /* | |
| * EISA interrupts are always active high and can be edge or level | |
| * triggered depending on the ELCR value. If an interrupt is listed as | |
| * EISA conforming in the MP table, that means its trigger type must be | |
| * read in from the ELCR. | |
| */ | |
| static bool eisa_irq_is_level(int idx, int bus, bool level) | |
| { | |
| switch (mp_bus_id_to_type[bus]) { | |
| case MP_BUS_PCI: | |
| case MP_BUS_ISA: | |
| return level; | |
| case MP_BUS_EISA: | |
| return EISA_ELCR(mp_irqs[idx].srcbusirq); | |
| } | |
| pr_warn("IOAPIC: Invalid srcbus: %d defaulting to level\n", bus); | |
| return true; | |
| } | |
| #else | |
| static inline int eisa_irq_is_level(int idx, int bus, bool level) | |
| { | |
| return level; | |
| } | |
| #endif | |
| static bool irq_is_level(int idx) | |
| { | |
| int bus = mp_irqs[idx].srcbus; | |
| bool level; | |
| /* | |
| * Determine IRQ trigger mode (edge or level sensitive): | |
| */ | |
| switch (mp_irqs[idx].irqflag & MP_IRQTRIG_MASK) { | |
| case MP_IRQTRIG_DEFAULT: | |
| /* | |
| * Conforms to spec, ie. bus-type dependent trigger | |
| * mode. PCI defaults to level, ISA to edge. | |
| */ | |
| level = !test_bit(bus, mp_bus_not_pci); | |
| /* Take EISA into account */ | |
| return eisa_irq_is_level(idx, bus, level); | |
| case MP_IRQTRIG_EDGE: | |
| return false; | |
| case MP_IRQTRIG_RESERVED: | |
| pr_warn("IOAPIC: Invalid trigger mode 2 defaulting to level\n"); | |
| fallthrough; | |
| case MP_IRQTRIG_LEVEL: | |
| default: /* Pointless default required due to do gcc stupidity */ | |
| return true; | |
| } | |
| } | |
| static int __acpi_get_override_irq(u32 gsi, bool *trigger, bool *polarity) | |
| { | |
| int ioapic, pin, idx; | |
| if (ioapic_is_disabled) | |
| return -1; | |
| ioapic = mp_find_ioapic(gsi); | |
| if (ioapic < 0) | |
| return -1; | |
| pin = mp_find_ioapic_pin(ioapic, gsi); | |
| if (pin < 0) | |
| return -1; | |
| idx = find_irq_entry(ioapic, pin, mp_INT); | |
| if (idx < 0) | |
| return -1; | |
| *trigger = irq_is_level(idx); | |
| *polarity = irq_active_low(idx); | |
| return 0; | |
| } | |
| #ifdef CONFIG_ACPI | |
| int acpi_get_override_irq(u32 gsi, int *is_level, int *active_low) | |
| { | |
| *is_level = *active_low = 0; | |
| return __acpi_get_override_irq(gsi, (bool *)is_level, | |
| (bool *)active_low); | |
| } | |
| #endif | |
| void ioapic_set_alloc_attr(struct irq_alloc_info *info, int node, | |
| int trigger, int polarity) | |
| { | |
| init_irq_alloc_info(info, NULL); | |
| info->type = X86_IRQ_ALLOC_TYPE_IOAPIC; | |
| info->ioapic.node = node; | |
| info->ioapic.is_level = trigger; | |
| info->ioapic.active_low = polarity; | |
| info->ioapic.valid = 1; | |
| } | |
| static void ioapic_copy_alloc_attr(struct irq_alloc_info *dst, | |
| struct irq_alloc_info *src, | |
| u32 gsi, int ioapic_idx, int pin) | |
| { | |
| bool level, pol_low; | |
| copy_irq_alloc_info(dst, src); | |
| dst->type = X86_IRQ_ALLOC_TYPE_IOAPIC; | |
| dst->devid = mpc_ioapic_id(ioapic_idx); | |
| dst->ioapic.pin = pin; | |
| dst->ioapic.valid = 1; | |
| if (src && src->ioapic.valid) { | |
| dst->ioapic.node = src->ioapic.node; | |
| dst->ioapic.is_level = src->ioapic.is_level; | |
| dst->ioapic.active_low = src->ioapic.active_low; | |
| } else { | |
| dst->ioapic.node = NUMA_NO_NODE; | |
| if (__acpi_get_override_irq(gsi, &level, &pol_low) >= 0) { | |
| dst->ioapic.is_level = level; | |
| dst->ioapic.active_low = pol_low; | |
| } else { | |
| /* | |
| * PCI interrupts are always active low level | |
| * triggered. | |
| */ | |
| dst->ioapic.is_level = true; | |
| dst->ioapic.active_low = true; | |
| } | |
| } | |
| } | |
| static int ioapic_alloc_attr_node(struct irq_alloc_info *info) | |
| { | |
| return (info && info->ioapic.valid) ? info->ioapic.node : NUMA_NO_NODE; | |
| } | |
| static void mp_register_handler(unsigned int irq, bool level) | |
| { | |
| irq_flow_handler_t hdl; | |
| bool fasteoi; | |
| if (level) { | |
| irq_set_status_flags(irq, IRQ_LEVEL); | |
| fasteoi = true; | |
| } else { | |
| irq_clear_status_flags(irq, IRQ_LEVEL); | |
| fasteoi = false; | |
| } | |
| hdl = fasteoi ? handle_fasteoi_irq : handle_edge_irq; | |
| __irq_set_handler(irq, hdl, 0, fasteoi ? "fasteoi" : "edge"); | |
| } | |
| static bool mp_check_pin_attr(int irq, struct irq_alloc_info *info) | |
| { | |
| struct mp_chip_data *data = irq_get_chip_data(irq); | |
| /* | |
| * setup_IO_APIC_irqs() programs all legacy IRQs with default trigger | |
| * and polarity attributes. So allow the first user to reprogram the | |
| * pin with real trigger and polarity attributes. | |
| */ | |
| if (irq < nr_legacy_irqs() && data->count == 1) { | |
| if (info->ioapic.is_level != data->is_level) | |
| mp_register_handler(irq, info->ioapic.is_level); | |
| data->entry.is_level = data->is_level = info->ioapic.is_level; | |
| data->entry.active_low = data->active_low = info->ioapic.active_low; | |
| } | |
| return data->is_level == info->ioapic.is_level && | |
| data->active_low == info->ioapic.active_low; | |
| } | |
| static int alloc_irq_from_domain(struct irq_domain *domain, int ioapic, u32 gsi, | |
| struct irq_alloc_info *info) | |
| { | |
| int type = ioapics[ioapic].irqdomain_cfg.type; | |
| bool legacy = false; | |
| int irq = -1; | |
| switch (type) { | |
| case IOAPIC_DOMAIN_LEGACY: | |
| /* | |
| * Dynamically allocate IRQ number for non-ISA IRQs in the first | |
| * 16 GSIs on some weird platforms. | |
| */ | |
| if (!ioapic_initialized || gsi >= nr_legacy_irqs()) | |
| irq = gsi; | |
| legacy = mp_is_legacy_irq(irq); | |
| break; | |
| case IOAPIC_DOMAIN_STRICT: | |
| irq = gsi; | |
| break; | |
| case IOAPIC_DOMAIN_DYNAMIC: | |
| break; | |
| default: | |
| WARN(1, "ioapic: unknown irqdomain type %d\n", type); | |
| return -1; | |
| } | |
| return __irq_domain_alloc_irqs(domain, irq, 1, ioapic_alloc_attr_node(info), | |
| info, legacy, NULL); | |
| } | |
| /* | |
| * Need special handling for ISA IRQs because there may be multiple IOAPIC pins | |
| * sharing the same ISA IRQ number and irqdomain only supports 1:1 mapping | |
| * between IOAPIC pin and IRQ number. A typical IOAPIC has 24 pins, pin 0-15 are | |
| * used for legacy IRQs and pin 16-23 are used for PCI IRQs (PIRQ A-H). | |
| * When ACPI is disabled, only legacy IRQ numbers (IRQ0-15) are available, and | |
| * some BIOSes may use MP Interrupt Source records to override IRQ numbers for | |
| * PIRQs instead of reprogramming the interrupt routing logic. Thus there may be | |
| * multiple pins sharing the same legacy IRQ number when ACPI is disabled. | |
| */ | |
| static int alloc_isa_irq_from_domain(struct irq_domain *domain, int irq, int ioapic, int pin, | |
| struct irq_alloc_info *info) | |
| { | |
| struct irq_data *irq_data = irq_get_irq_data(irq); | |
| int node = ioapic_alloc_attr_node(info); | |
| struct mp_chip_data *data; | |
| /* | |
| * Legacy ISA IRQ has already been allocated, just add pin to | |
| * the pin list associated with this IRQ and program the IOAPIC | |
| * entry. | |
| */ | |
| if (irq_data && irq_data->parent_data) { | |
| if (!mp_check_pin_attr(irq, info)) | |
| return -EBUSY; | |
| if (!add_pin_to_irq_node(irq_data->chip_data, node, ioapic, info->ioapic.pin)) | |
| return -ENOMEM; | |
| } else { | |
| info->flags |= X86_IRQ_ALLOC_LEGACY; | |
| irq = __irq_domain_alloc_irqs(domain, irq, 1, node, info, true, NULL); | |
| if (irq >= 0) { | |
| irq_data = irq_domain_get_irq_data(domain, irq); | |
| data = irq_data->chip_data; | |
| data->isa_irq = true; | |
| } | |
| } | |
| return irq; | |
| } | |
| static int mp_map_pin_to_irq(u32 gsi, int idx, int ioapic, int pin, | |
| unsigned int flags, struct irq_alloc_info *info) | |
| { | |
| struct irq_domain *domain = mp_ioapic_irqdomain(ioapic); | |
| struct irq_alloc_info tmp; | |
| struct mp_chip_data *data; | |
| bool legacy = false; | |
| int irq; | |
| if (!domain) | |
| return -ENOSYS; | |
| if (idx >= 0 && test_bit(mp_irqs[idx].srcbus, mp_bus_not_pci)) { | |
| irq = mp_irqs[idx].srcbusirq; | |
| legacy = mp_is_legacy_irq(irq); | |
| /* | |
| * IRQ2 is unusable for historical reasons on systems which | |
| * have a legacy PIC. See the comment vs. IRQ2 further down. | |
| * | |
| * If this gets removed at some point then the related code | |
| * in lapic_assign_system_vectors() needs to be adjusted as | |
| * well. | |
| */ | |
| if (legacy && irq == PIC_CASCADE_IR) | |
| return -EINVAL; | |
| } | |
| guard(mutex)(&ioapic_mutex); | |
| if (!(flags & IOAPIC_MAP_ALLOC)) { | |
| if (!legacy) { | |
| irq = irq_find_mapping(domain, pin); | |
| if (irq == 0) | |
| irq = -ENOENT; | |
| } | |
| } else { | |
| ioapic_copy_alloc_attr(&tmp, info, gsi, ioapic, pin); | |
| if (legacy) | |
| irq = alloc_isa_irq_from_domain(domain, irq, | |
| ioapic, pin, &tmp); | |
| else if ((irq = irq_find_mapping(domain, pin)) == 0) | |
| irq = alloc_irq_from_domain(domain, ioapic, gsi, &tmp); | |
| else if (!mp_check_pin_attr(irq, &tmp)) | |
| irq = -EBUSY; | |
| if (irq >= 0) { | |
| data = irq_get_chip_data(irq); | |
| data->count++; | |
| } | |
| } | |
| return irq; | |
| } | |
| static int pin_2_irq(int idx, int ioapic, int pin, unsigned int flags) | |
| { | |
| u32 gsi = mp_pin_to_gsi(ioapic, pin); | |
| /* Debugging check, we are in big trouble if this message pops up! */ | |
| if (mp_irqs[idx].dstirq != pin) | |
| pr_err("broken BIOS or MPTABLE parser, ayiee!!\n"); | |
| #ifdef CONFIG_X86_32 | |
| /* PCI IRQ command line redirection. Yes, limits are hardcoded. */ | |
| if ((pin >= 16) && (pin <= 23)) { | |
| if (pirq_entries[pin - 16] != -1) { | |
| if (!pirq_entries[pin - 16]) { | |
| apic_pr_verbose("Disabling PIRQ%d\n", pin - 16); | |
| } else { | |
| int irq = pirq_entries[pin-16]; | |
| apic_pr_verbose("Using PIRQ%d -> IRQ %d\n", pin - 16, irq); | |
| return irq; | |
| } | |
| } | |
| } | |
| #endif | |
| return mp_map_pin_to_irq(gsi, idx, ioapic, pin, flags, NULL); | |
| } | |
| int mp_map_gsi_to_irq(u32 gsi, unsigned int flags, struct irq_alloc_info *info) | |
| { | |
| int ioapic, pin, idx; | |
| ioapic = mp_find_ioapic(gsi); | |
| if (ioapic < 0) | |
| return -ENODEV; | |
| pin = mp_find_ioapic_pin(ioapic, gsi); | |
| idx = find_irq_entry(ioapic, pin, mp_INT); | |
| if ((flags & IOAPIC_MAP_CHECK) && idx < 0) | |
| return -ENODEV; | |
| return mp_map_pin_to_irq(gsi, idx, ioapic, pin, flags, info); | |
| } | |
| void mp_unmap_irq(int irq) | |
| { | |
| struct irq_data *irq_data = irq_get_irq_data(irq); | |
| struct mp_chip_data *data; | |
| if (!irq_data || !irq_data->domain) | |
| return; | |
| data = irq_data->chip_data; | |
| if (!data || data->isa_irq) | |
| return; | |
| guard(mutex)(&ioapic_mutex); | |
| if (--data->count == 0) | |
| irq_domain_free_irqs(irq, 1); | |
| } | |
| /* | |
| * Find a specific PCI IRQ entry. | |
| * Not an __init, possibly needed by modules | |
| */ | |
| int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) | |
| { | |
| int irq, i, best_ioapic = -1, best_idx = -1; | |
| apic_pr_debug("Querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n", | |
| bus, slot, pin); | |
| if (test_bit(bus, mp_bus_not_pci)) { | |
| apic_pr_verbose("PCI BIOS passed nonexistent PCI bus %d!\n", bus); | |
| return -1; | |
| } | |
| for (i = 0; i < mp_irq_entries; i++) { | |
| int lbus = mp_irqs[i].srcbus; | |
| int ioapic_idx, found = 0; | |
| if (bus != lbus || mp_irqs[i].irqtype != mp_INT || | |
| slot != ((mp_irqs[i].srcbusirq >> 2) & 0x1f)) | |
| continue; | |
| for_each_ioapic(ioapic_idx) | |
| if (mpc_ioapic_id(ioapic_idx) == mp_irqs[i].dstapic || | |
| mp_irqs[i].dstapic == MP_APIC_ALL) { | |
| found = 1; | |
| break; | |
| } | |
| if (!found) | |
| continue; | |
| /* Skip ISA IRQs */ | |
| irq = pin_2_irq(i, ioapic_idx, mp_irqs[i].dstirq, 0); | |
| if (irq > 0 && !IO_APIC_IRQ(irq)) | |
| continue; | |
| if (pin == (mp_irqs[i].srcbusirq & 3)) { | |
| best_idx = i; | |
| best_ioapic = ioapic_idx; | |
| goto out; | |
| } | |
| /* | |
| * Use the first all-but-pin matching entry as a | |
| * best-guess fuzzy result for broken mptables. | |
| */ | |
| if (best_idx < 0) { | |
| best_idx = i; | |
| best_ioapic = ioapic_idx; | |
| } | |
| } | |
| if (best_idx < 0) | |
| return -1; | |
| out: | |
| return pin_2_irq(best_idx, best_ioapic, mp_irqs[best_idx].dstirq, IOAPIC_MAP_ALLOC); | |
| } | |
| EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector); | |
| static struct irq_chip ioapic_chip, ioapic_ir_chip; | |
| static void __init setup_IO_APIC_irqs(void) | |
| { | |
| unsigned int ioapic, pin; | |
| int idx; | |
| apic_pr_verbose("Init IO_APIC IRQs\n"); | |
| for_each_ioapic_pin(ioapic, pin) { | |
| idx = find_irq_entry(ioapic, pin, mp_INT); | |
| if (idx < 0) { | |
| apic_pr_verbose("apic %d pin %d not connected\n", | |
| mpc_ioapic_id(ioapic), pin); | |
| } else { | |
| pin_2_irq(idx, ioapic, pin, ioapic ? 0 : IOAPIC_MAP_ALLOC); | |
| } | |
| } | |
| } | |
| void ioapic_zap_locks(void) | |
| { | |
| raw_spin_lock_init(&ioapic_lock); | |
| } | |
| static void io_apic_print_entries(unsigned int apic, unsigned int nr_entries) | |
| { | |
| struct IO_APIC_route_entry entry; | |
| char buf[256]; | |
| int i; | |
| apic_dbg("IOAPIC %d:\n", apic); | |
| for (i = 0; i <= nr_entries; i++) { | |
| entry = ioapic_read_entry(apic, i); | |
| snprintf(buf, sizeof(buf), " pin%02x, %s, %s, %s, V(%02X), IRR(%1d), S(%1d)", | |
| i, entry.masked ? "disabled" : "enabled ", | |
| entry.is_level ? "level" : "edge ", | |
| entry.active_low ? "low " : "high", | |
| entry.vector, entry.irr, entry.delivery_status); | |
| if (entry.ir_format) { | |
| apic_dbg("%s, remapped, I(%04X), Z(%X)\n", buf, | |
| (entry.ir_index_15 << 15) | entry.ir_index_0_14, entry.ir_zero); | |
| } else { | |
| apic_dbg("%s, %s, D(%02X%02X), M(%1d)\n", buf, | |
| entry.dest_mode_logical ? "logical " : "physical", | |
| entry.virt_destid_8_14, entry.destid_0_7, entry.delivery_mode); | |
| } | |
| } | |
| } | |
| static void __init print_IO_APIC(int ioapic_idx) | |
| { | |
| union IO_APIC_reg_00 reg_00; | |
| union IO_APIC_reg_01 reg_01; | |
| union IO_APIC_reg_02 reg_02; | |
| union IO_APIC_reg_03 reg_03; | |
| scoped_guard (raw_spinlock_irqsave, &ioapic_lock) { | |
| reg_00.raw = io_apic_read(ioapic_idx, 0); | |
| reg_01.raw = io_apic_read(ioapic_idx, 1); | |
| if (reg_01.bits.version >= 0x10) | |
| reg_02.raw = io_apic_read(ioapic_idx, 2); | |
| if (reg_01.bits.version >= 0x20) | |
| reg_03.raw = io_apic_read(ioapic_idx, 3); | |
| } | |
| apic_dbg("IO APIC #%d......\n", mpc_ioapic_id(ioapic_idx)); | |
| apic_dbg(".... register #00: %08X\n", reg_00.raw); | |
| apic_dbg("....... : physical APIC id: %02X\n", reg_00.bits.ID); | |
| apic_dbg("....... : Delivery Type: %X\n", reg_00.bits.delivery_type); | |
| apic_dbg("....... : LTS : %X\n", reg_00.bits.LTS); | |
| apic_dbg(".... register #01: %08X\n", *(int *)®_01); | |
| apic_dbg("....... : max redirection entries: %02X\n", reg_01.bits.entries); | |
| apic_dbg("....... : PRQ implemented: %X\n", reg_01.bits.PRQ); | |
| apic_dbg("....... : IO APIC version: %02X\n", reg_01.bits.version); | |
| /* | |
| * Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02, | |
| * but the value of reg_02 is read as the previous read register | |
| * value, so ignore it if reg_02 == reg_01. | |
| */ | |
| if (reg_01.bits.version >= 0x10 && reg_02.raw != reg_01.raw) { | |
| apic_dbg(".... register #02: %08X\n", reg_02.raw); | |
| apic_dbg("....... : arbitration: %02X\n", reg_02.bits.arbitration); | |
| } | |
| /* | |
| * Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02 | |
| * or reg_03, but the value of reg_0[23] is read as the previous read | |
| * register value, so ignore it if reg_03 == reg_0[12]. | |
| */ | |
| if (reg_01.bits.version >= 0x20 && reg_03.raw != reg_02.raw && | |
| reg_03.raw != reg_01.raw) { | |
| apic_dbg(".... register #03: %08X\n", reg_03.raw); | |
| apic_dbg("....... : Boot DT : %X\n", reg_03.bits.boot_DT); | |
| } | |
| apic_dbg(".... IRQ redirection table:\n"); | |
| io_apic_print_entries(ioapic_idx, reg_01.bits.entries); | |
| } | |
| void __init print_IO_APICs(void) | |
| { | |
| int ioapic_idx; | |
| unsigned int irq; | |
| apic_dbg("number of MP IRQ sources: %d.\n", mp_irq_entries); | |
| for_each_ioapic(ioapic_idx) { | |
| apic_dbg("number of IO-APIC #%d registers: %d.\n", | |
| mpc_ioapic_id(ioapic_idx), ioapics[ioapic_idx].nr_registers); | |
| } | |
| /* | |
| * We are a bit conservative about what we expect. We have to | |
| * know about every hardware change ASAP. | |
| */ | |
| printk(KERN_INFO "testing the IO APIC.......................\n"); | |
| for_each_ioapic(ioapic_idx) | |
| print_IO_APIC(ioapic_idx); | |
| apic_dbg("IRQ to pin mappings:\n"); | |
| for_each_active_irq(irq) { | |
| struct irq_pin_list *entry; | |
| struct irq_chip *chip; | |
| struct mp_chip_data *data; | |
| chip = irq_get_chip(irq); | |
| if (chip != &ioapic_chip && chip != &ioapic_ir_chip) | |
| continue; | |
| data = irq_get_chip_data(irq); | |
| if (!data) | |
| continue; | |
| if (list_empty(&data->irq_2_pin)) | |
| continue; | |
| apic_dbg("IRQ%d ", irq); | |
| for_each_irq_pin(entry, data->irq_2_pin) | |
| pr_cont("-> %d:%d", entry->apic, entry->pin); | |
| pr_cont("\n"); | |
| } | |
| printk(KERN_INFO ".................................... done.\n"); | |
| } | |
| /* Where if anywhere is the i8259 connect in external int mode */ | |
| static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; | |
| void __init enable_IO_APIC(void) | |
| { | |
| int i8259_apic, i8259_pin, apic, pin; | |
| if (ioapic_is_disabled) | |
| nr_ioapics = 0; | |
| if (!nr_legacy_irqs() || !nr_ioapics) | |
| return; | |
| for_each_ioapic_pin(apic, pin) { | |
| /* See if any of the pins is in ExtINT mode */ | |
| struct IO_APIC_route_entry entry = ioapic_read_entry(apic, pin); | |
| /* | |
| * If the interrupt line is enabled and in ExtInt mode I | |
| * have found the pin where the i8259 is connected. | |
| */ | |
| if (!entry.masked && entry.delivery_mode == APIC_DELIVERY_MODE_EXTINT) { | |
| ioapic_i8259.apic = apic; | |
| ioapic_i8259.pin = pin; | |
| break; | |
| } | |
| } | |
| /* | |
| * Look to see what if the MP table has reported the ExtINT | |
| * | |
| * If we could not find the appropriate pin by looking at the ioapic | |
| * the i8259 probably is not connected the ioapic but give the | |
| * mptable a chance anyway. | |
| */ | |
| i8259_pin = find_isa_irq_pin(0, mp_ExtINT); | |
| i8259_apic = find_isa_irq_apic(0, mp_ExtINT); | |
| /* Trust the MP table if nothing is setup in the hardware */ | |
| if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) { | |
| pr_warn("ExtINT not setup in hardware but reported by MP table\n"); | |
| ioapic_i8259.pin = i8259_pin; | |
| ioapic_i8259.apic = i8259_apic; | |
| } | |
| /* Complain if the MP table and the hardware disagree */ | |
| if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) && | |
| (i8259_pin >= 0) && (ioapic_i8259.pin >= 0)) | |
| pr_warn("ExtINT in hardware and MP table differ\n"); | |
| /* Do not trust the IO-APIC being empty at bootup */ | |
| clear_IO_APIC(); | |
| } | |
| void native_restore_boot_irq_mode(void) | |
| { | |
| /* | |
| * If the i8259 is routed through an IOAPIC Put that IOAPIC in | |
| * virtual wire mode so legacy interrupts can be delivered. | |
| */ | |
| if (ioapic_i8259.pin != -1) { | |
| struct IO_APIC_route_entry entry; | |
| u32 apic_id = read_apic_id(); | |
| memset(&entry, 0, sizeof(entry)); | |
| entry.masked = false; | |
| entry.is_level = false; | |
| entry.active_low = false; | |
| entry.dest_mode_logical = false; | |
| entry.delivery_mode = APIC_DELIVERY_MODE_EXTINT; | |
| entry.destid_0_7 = apic_id & 0xFF; | |
| entry.virt_destid_8_14 = apic_id >> 8; | |
| /* Add it to the IO-APIC irq-routing table */ | |
| ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry); | |
| } | |
| if (boot_cpu_has(X86_FEATURE_APIC) || apic_from_smp_config()) | |
| disconnect_bsp_APIC(ioapic_i8259.pin != -1); | |
| } | |
| void restore_boot_irq_mode(void) | |
| { | |
| if (!nr_legacy_irqs()) | |
| return; | |
| x86_apic_ops.restore(); | |
| } | |
| #ifdef CONFIG_X86_32 | |
| /* | |
| * function to set the IO-APIC physical IDs based on the | |
| * values stored in the MPC table. | |
| * | |
| * by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999 | |
| */ | |
| static void __init setup_ioapic_ids_from_mpc_nocheck(void) | |
| { | |
| DECLARE_BITMAP(phys_id_present_map, MAX_LOCAL_APIC); | |
| const u32 broadcast_id = 0xF; | |
| union IO_APIC_reg_00 reg_00; | |
| unsigned char old_id; | |
| int ioapic_idx, i; | |
| /* | |
| * This is broken; anything with a real cpu count has to | |
| * circumvent this idiocy regardless. | |
| */ | |
| copy_phys_cpu_present_map(phys_id_present_map); | |
| /* | |
| * Set the IOAPIC ID to the value stored in the MPC table. | |
| */ | |
| for_each_ioapic(ioapic_idx) { | |
| /* Read the register 0 value */ | |
| scoped_guard (raw_spinlock_irqsave, &ioapic_lock) | |
| reg_00.raw = io_apic_read(ioapic_idx, 0); | |
| old_id = mpc_ioapic_id(ioapic_idx); | |
| if (mpc_ioapic_id(ioapic_idx) >= broadcast_id) { | |
| pr_err(FW_BUG "IO-APIC#%d ID is %d in the MPC table!...\n", | |
| ioapic_idx, mpc_ioapic_id(ioapic_idx)); | |
| pr_err("... fixing up to %d. (tell your hw vendor)\n", reg_00.bits.ID); | |
| ioapics[ioapic_idx].mp_config.apicid = reg_00.bits.ID; | |
| } | |
| /* | |
| * Sanity check, is the ID really free? Every APIC in a | |
| * system must have a unique ID or we get lots of nice | |
| * 'stuck on smp_invalidate_needed IPI wait' messages. | |
| */ | |
| if (test_bit(mpc_ioapic_id(ioapic_idx), phys_id_present_map)) { | |
| pr_err(FW_BUG "IO-APIC#%d ID %d is already used!...\n", | |
| ioapic_idx, mpc_ioapic_id(ioapic_idx)); | |
| for (i = 0; i < broadcast_id; i++) | |
| if (!test_bit(i, phys_id_present_map)) | |
| break; | |
| if (i >= broadcast_id) | |
| panic("Max APIC ID exceeded!\n"); | |
| pr_err("... fixing up to %d. (tell your hw vendor)\n", i); | |
| set_bit(i, phys_id_present_map); | |
| ioapics[ioapic_idx].mp_config.apicid = i; | |
| } else { | |
| apic_pr_verbose("Setting %d in the phys_id_present_map\n", | |
| mpc_ioapic_id(ioapic_idx)); | |
| set_bit(mpc_ioapic_id(ioapic_idx), phys_id_present_map); | |
| } | |
| /* | |
| * We need to adjust the IRQ routing table if the ID | |
| * changed. | |
| */ | |
| if (old_id != mpc_ioapic_id(ioapic_idx)) { | |
| for (i = 0; i < mp_irq_entries; i++) { | |
| if (mp_irqs[i].dstapic == old_id) | |
| mp_irqs[i].dstapic = mpc_ioapic_id(ioapic_idx); | |
| } | |
| } | |
| /* | |
| * Update the ID register according to the right value from | |
| * the MPC table if they are different. | |
| */ | |
| if (mpc_ioapic_id(ioapic_idx) == reg_00.bits.ID) | |
| continue; | |
| apic_pr_verbose("...changing IO-APIC physical APIC ID to %d ...", | |
| mpc_ioapic_id(ioapic_idx)); | |
| reg_00.bits.ID = mpc_ioapic_id(ioapic_idx); | |
| scoped_guard (raw_spinlock_irqsave, &ioapic_lock) { | |
| io_apic_write(ioapic_idx, 0, reg_00.raw); | |
| reg_00.raw = io_apic_read(ioapic_idx, 0); | |
| } | |
| /* Sanity check */ | |
| if (reg_00.bits.ID != mpc_ioapic_id(ioapic_idx)) | |
| pr_cont("could not set ID!\n"); | |
| else | |
| apic_pr_verbose(" ok.\n"); | |
| } | |
| } | |
| void __init setup_ioapic_ids_from_mpc(void) | |
| { | |
| if (acpi_ioapic) | |
| return; | |
| /* | |
| * Don't check I/O APIC IDs for xAPIC systems. They have | |
| * no meaning without the serial APIC bus. | |
| */ | |
| if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) | |
| || APIC_XAPIC(boot_cpu_apic_version)) | |
| return; | |
| setup_ioapic_ids_from_mpc_nocheck(); | |
| } | |
| #endif | |
| int no_timer_check __initdata; | |
| static int __init notimercheck(char *s) | |
| { | |
| no_timer_check = 1; | |
| return 1; | |
| } | |
| __setup("no_timer_check", notimercheck); | |
| static void __init delay_with_tsc(void) | |
| { | |
| unsigned long long start, now; | |
| unsigned long end = jiffies + 4; | |
| start = rdtsc(); | |
| /* | |
| * We don't know the TSC frequency yet, but waiting for | |
| * 40000000000/HZ TSC cycles is safe: | |
| * 4 GHz == 10 jiffies | |
| * 1 GHz == 40 jiffies | |
| */ | |
| do { | |
| native_pause(); | |
| now = rdtsc(); | |
| } while ((now - start) < 40000000000ULL / HZ && time_before_eq(jiffies, end)); | |
| } | |
| static void __init delay_without_tsc(void) | |
| { | |
| unsigned long end = jiffies + 4; | |
| int band = 1; | |
| /* | |
| * We don't know any frequency yet, but waiting for | |
| * 40940000000/HZ cycles is safe: | |
| * 4 GHz == 10 jiffies | |
| * 1 GHz == 40 jiffies | |
| * 1 << 1 + 1 << 2 +...+ 1 << 11 = 4094 | |
| */ | |
| do { | |
| __delay(((1U << band++) * 10000000UL) / HZ); | |
| } while (band < 12 && time_before_eq(jiffies, end)); | |
| } | |
| /* | |
| * There is a nasty bug in some older SMP boards, their mptable lies | |
| * about the timer IRQ. We do the following to work around the situation: | |
| * | |
| * - timer IRQ defaults to IO-APIC IRQ | |
| * - if this function detects that timer IRQs are defunct, then we fall | |
| * back to ISA timer IRQs | |
| */ | |
| static int __init timer_irq_works(void) | |
| { | |
| unsigned long t1 = jiffies; | |
| if (no_timer_check) | |
| return 1; | |
| local_irq_enable(); | |
| if (boot_cpu_has(X86_FEATURE_TSC)) | |
| delay_with_tsc(); | |
| else | |
| delay_without_tsc(); | |
| /* | |
| * Expect a few ticks at least, to be sure some possible | |
| * glue logic does not lock up after one or two first | |
| * ticks in a non-ExtINT mode. Also the local APIC | |
| * might have cached one ExtINT interrupt. Finally, at | |
| * least one tick may be lost due to delays. | |
| */ | |
| local_irq_disable(); | |
| /* Did jiffies advance? */ | |
| return time_after(jiffies, t1 + 4); | |
| } | |
| /* | |
| * In the SMP+IOAPIC case it might happen that there are an unspecified | |
| * number of pending IRQ events unhandled. These cases are very rare, | |
| * so we 'resend' these IRQs via IPIs, to the same CPU. It's much | |
| * better to do it this way as thus we do not have to be aware of | |
| * 'pending' interrupts in the IRQ path, except at this point. | |
| * | |
| * | |
| * Edge triggered needs to resend any interrupt that was delayed but this | |
| * is now handled in the device independent code. | |
| * | |
| * Starting up a edge-triggered IO-APIC interrupt is nasty - we need to | |
| * make sure that we get the edge. If it is already asserted for some | |
| * reason, we need return 1 to indicate that is was pending. | |
| * | |
| * This is not complete - we should be able to fake an edge even if it | |
| * isn't on the 8259A... | |
| */ | |
| static unsigned int startup_ioapic_irq(struct irq_data *data) | |
| { | |
| int was_pending = 0, irq = data->irq; | |
| guard(raw_spinlock_irqsave)(&ioapic_lock); | |
| if (irq < nr_legacy_irqs()) { | |
| legacy_pic->mask(irq); | |
| if (legacy_pic->irq_pending(irq)) | |
| was_pending = 1; | |
| } | |
| __unmask_ioapic(data->chip_data); | |
| return was_pending; | |
| } | |
| #ifdef CONFIG_GENERIC_PENDING_IRQ | |
| static bool io_apic_level_ack_pending(struct mp_chip_data *data) | |
| { | |
| struct irq_pin_list *entry; | |
| guard(raw_spinlock_irqsave)(&ioapic_lock); | |
| for_each_irq_pin(entry, data->irq_2_pin) { | |
| struct IO_APIC_route_entry e; | |
| int pin; | |
| pin = entry->pin; | |
| e.w1 = io_apic_read(entry->apic, 0x10 + pin*2); | |
| /* Is the remote IRR bit set? */ | |
| if (e.irr) | |
| return true; | |
| } | |
| return false; | |
| } | |
| static inline bool ioapic_prepare_move(struct irq_data *data) | |
| { | |
| /* If we are moving the IRQ we need to mask it */ | |
| if (unlikely(irqd_is_setaffinity_pending(data))) { | |
| if (!irqd_irq_masked(data)) | |
| mask_ioapic_irq(data); | |
| return true; | |
| } | |
| return false; | |
| } | |
| static inline void ioapic_finish_move(struct irq_data *data, bool moveit) | |
| { | |
| if (unlikely(moveit)) { | |
| /* | |
| * Only migrate the irq if the ack has been received. | |
| * | |
| * On rare occasions the broadcast level triggered ack gets | |
| * delayed going to ioapics, and if we reprogram the | |
| * vector while Remote IRR is still set the irq will never | |
| * fire again. | |
| * | |
| * To prevent this scenario we read the Remote IRR bit | |
| * of the ioapic. This has two effects. | |
| * - On any sane system the read of the ioapic will | |
| * flush writes (and acks) going to the ioapic from | |
| * this cpu. | |
| * - We get to see if the ACK has actually been delivered. | |
| * | |
| * Based on failed experiments of reprogramming the | |
| * ioapic entry from outside of irq context starting | |
| * with masking the ioapic entry and then polling until | |
| * Remote IRR was clear before reprogramming the | |
| * ioapic I don't trust the Remote IRR bit to be | |
| * completely accurate. | |
| * | |
| * However there appears to be no other way to plug | |
| * this race, so if the Remote IRR bit is not | |
| * accurate and is causing problems then it is a hardware bug | |
| * and you can go talk to the chipset vendor about it. | |
| */ | |
| if (!io_apic_level_ack_pending(data->chip_data)) | |
| irq_move_masked_irq(data); | |
| /* If the IRQ is masked in the core, leave it: */ | |
| if (!irqd_irq_masked(data)) | |
| unmask_ioapic_irq(data); | |
| } | |
| } | |
| #else | |
| static inline bool ioapic_prepare_move(struct irq_data *data) | |
| { | |
| return false; | |
| } | |
| static inline void ioapic_finish_move(struct irq_data *data, bool moveit) | |
| { | |
| } | |
| #endif | |
| static void ioapic_ack_level(struct irq_data *irq_data) | |
| { | |
| struct irq_cfg *cfg = irqd_cfg(irq_data); | |
| unsigned long v; | |
| bool moveit; | |
| int i; | |
| irq_complete_move(cfg); | |
| moveit = ioapic_prepare_move(irq_data); | |
| /* | |
| * It appears there is an erratum which affects at least version 0x11 | |
| * of I/O APIC (that's the 82093AA and cores integrated into various | |
| * chipsets). Under certain conditions a level-triggered interrupt is | |
| * erroneously delivered as edge-triggered one but the respective IRR | |
| * bit gets set nevertheless. As a result the I/O unit expects an EOI | |
| * message but it will never arrive and further interrupts are blocked | |
| * from the source. The exact reason is so far unknown, but the | |
| * phenomenon was observed when two consecutive interrupt requests | |
| * from a given source get delivered to the same CPU and the source is | |
| * temporarily disabled in between. | |
| * | |
| * A workaround is to simulate an EOI message manually. We achieve it | |
| * by setting the trigger mode to edge and then to level when the edge | |
| * trigger mode gets detected in the TMR of a local APIC for a | |
| * level-triggered interrupt. We mask the source for the time of the | |
| * operation to prevent an edge-triggered interrupt escaping meanwhile. | |
| * The idea is from Manfred Spraul. --macro | |
| * | |
| * Also in the case when cpu goes offline, fixup_irqs() will forward | |
| * any unhandled interrupt on the offlined cpu to the new cpu | |
| * destination that is handling the corresponding interrupt. This | |
| * interrupt forwarding is done via IPI's. Hence, in this case also | |
| * level-triggered io-apic interrupt will be seen as an edge | |
| * interrupt in the IRR. And we can't rely on the cpu's EOI | |
| * to be broadcasted to the IO-APIC's which will clear the remoteIRR | |
| * corresponding to the level-triggered interrupt. Hence on IO-APIC's | |
| * supporting EOI register, we do an explicit EOI to clear the | |
| * remote IRR and on IO-APIC's which don't have an EOI register, | |
| * we use the above logic (mask+edge followed by unmask+level) from | |
| * Manfred Spraul to clear the remote IRR. | |
| */ | |
| i = cfg->vector; | |
| v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1)); | |
| /* | |
| * We must acknowledge the irq before we move it or the acknowledge will | |
| * not propagate properly. | |
| */ | |
| apic_eoi(); | |
| /* | |
| * Tail end of clearing remote IRR bit (either by delivering the EOI | |
| * message via io-apic EOI register write or simulating it using | |
| * mask+edge followed by unmask+level logic) manually when the | |
| * level triggered interrupt is seen as the edge triggered interrupt | |
| * at the cpu. | |
| */ | |
| if (!(v & (1 << (i & 0x1f)))) { | |
| irq_stat_inc_and_enable(IRQ_COUNT_IOAPIC_MISROUTED); | |
| eoi_ioapic_pin(cfg->vector, irq_data->chip_data); | |
| } | |
| ioapic_finish_move(irq_data, moveit); | |
| } | |
| static void ioapic_ir_ack_level(struct irq_data *irq_data) | |
| { | |
| struct mp_chip_data *data = irq_data->chip_data; | |
| /* | |
| * Intr-remapping uses pin number as the virtual vector | |
| * in the RTE. Actual vector is programmed in | |
| * intr-remapping table entry. Hence for the io-apic | |
| * EOI we use the pin number. | |
| */ | |
| apic_ack_irq(irq_data); | |
| eoi_ioapic_pin(data->entry.vector, data); | |
| } | |
| /* | |
| * The I/OAPIC is just a device for generating MSI messages from legacy | |
| * interrupt pins. Various fields of the RTE translate into bits of the | |
| * resulting MSI which had a historical meaning. | |
| * | |
| * With interrupt remapping, many of those bits have different meanings | |
| * in the underlying MSI, but the way that the I/OAPIC transforms them | |
| * from its RTE to the MSI message is the same. This function allows | |
| * the parent IRQ domain to compose the MSI message, then takes the | |
| * relevant bits to put them in the appropriate places in the RTE in | |
| * order to generate that message when the IRQ happens. | |
| * | |
| * The setup here relies on a preconfigured route entry (is_level, | |
| * active_low, masked) because the parent domain is merely composing the | |
| * generic message routing information which is used for the MSI. | |
| */ | |
| static void ioapic_setup_msg_from_msi(struct irq_data *irq_data, | |
| struct IO_APIC_route_entry *entry) | |
| { | |
| struct msi_msg msg; | |
| /* Let the parent domain compose the MSI message */ | |
| irq_chip_compose_msi_msg(irq_data, &msg); | |
| /* | |
| * - Real vector | |
| * - DMAR/IR: 8bit subhandle (ioapic.pin) | |
| * - AMD/IR: 8bit IRTE index | |
| */ | |
| entry->vector = msg.arch_data.vector; | |
| /* Delivery mode (for DMAR/IR all 0) */ | |
| entry->delivery_mode = msg.arch_data.delivery_mode; | |
| /* Destination mode or DMAR/IR index bit 15 */ | |
| entry->dest_mode_logical = msg.arch_addr_lo.dest_mode_logical; | |
| /* DMAR/IR: 1, 0 for all other modes */ | |
| entry->ir_format = msg.arch_addr_lo.dmar_format; | |
| /* | |
| * - DMAR/IR: index bit 0-14. | |
| * | |
| * - Virt: If the host supports x2apic without a virtualized IR | |
| * unit then bit 0-6 of dmar_index_0_14 are providing bit | |
| * 8-14 of the destination id. | |
| * | |
| * All other modes have bit 0-6 of dmar_index_0_14 cleared and the | |
| * topmost 8 bits are destination id bit 0-7 (entry::destid_0_7). | |
| */ | |
| entry->ir_index_0_14 = msg.arch_addr_lo.dmar_index_0_14; | |
| } | |
| static void ioapic_configure_entry(struct irq_data *irqd) | |
| { | |
| struct mp_chip_data *mpd = irqd->chip_data; | |
| struct irq_pin_list *entry; | |
| ioapic_setup_msg_from_msi(irqd, &mpd->entry); | |
| for_each_irq_pin(entry, mpd->irq_2_pin) | |
| __ioapic_write_entry(entry->apic, entry->pin, mpd->entry); | |
| } | |
| static int ioapic_set_affinity(struct irq_data *irq_data, const struct cpumask *mask, bool force) | |
| { | |
| struct irq_data *parent = irq_data->parent_data; | |
| int ret; | |
| ret = parent->chip->irq_set_affinity(parent, mask, force); | |
| guard(raw_spinlock_irqsave)(&ioapic_lock); | |
| if (ret >= 0 && ret != IRQ_SET_MASK_OK_DONE) | |
| ioapic_configure_entry(irq_data); | |
| return ret; | |
| } | |
| /* | |
| * Interrupt shutdown masks the ioapic pin, but the interrupt might already | |
| * be in flight, but not yet serviced by the target CPU. That means | |
| * __synchronize_hardirq() would return and claim that everything is calmed | |
| * down. So free_irq() would proceed and deactivate the interrupt and free | |
| * resources. | |
| * | |
| * Once the target CPU comes around to service it it will find a cleared | |
| * vector and complain. While the spurious interrupt is harmless, the full | |
| * release of resources might prevent the interrupt from being acknowledged | |
| * which keeps the hardware in a weird state. | |
| * | |
| * Verify that the corresponding Remote-IRR bits are clear. | |
| */ | |
| static int ioapic_irq_get_chip_state(struct irq_data *irqd, enum irqchip_irq_state which, | |
| bool *state) | |
| { | |
| struct mp_chip_data *mcd = irqd->chip_data; | |
| struct IO_APIC_route_entry rentry; | |
| struct irq_pin_list *p; | |
| if (which != IRQCHIP_STATE_ACTIVE) | |
| return -EINVAL; | |
| *state = false; | |
| guard(raw_spinlock)(&ioapic_lock); | |
| for_each_irq_pin(p, mcd->irq_2_pin) { | |
| rentry = __ioapic_read_entry(p->apic, p->pin); | |
| /* | |
| * The remote IRR is only valid in level trigger mode. It's | |
| * meaning is undefined for edge triggered interrupts and | |
| * irrelevant because the IO-APIC treats them as fire and | |
| * forget. | |
| */ | |
| if (rentry.irr && rentry.is_level) { | |
| *state = true; | |
| break; | |
| } | |
| } | |
| return 0; | |
| } | |
| static struct irq_chip ioapic_chip __read_mostly = { | |
| .name = "IO-APIC", | |
| .irq_startup = startup_ioapic_irq, | |
| .irq_mask = mask_ioapic_irq, | |
| .irq_unmask = unmask_ioapic_irq, | |
| .irq_ack = irq_chip_ack_parent, | |
| .irq_eoi = ioapic_ack_level, | |
| .irq_set_affinity = ioapic_set_affinity, | |
| .irq_retrigger = irq_chip_retrigger_hierarchy, | |
| .irq_get_irqchip_state = ioapic_irq_get_chip_state, | |
| .flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MOVE_DEFERRED | | |
| IRQCHIP_AFFINITY_PRE_STARTUP, | |
| }; | |
| static struct irq_chip ioapic_ir_chip __read_mostly = { | |
| .name = "IR-IO-APIC", | |
| .irq_startup = startup_ioapic_irq, | |
| .irq_mask = mask_ioapic_irq, | |
| .irq_unmask = unmask_ioapic_irq, | |
| .irq_ack = irq_chip_ack_parent, | |
| .irq_eoi = ioapic_ir_ack_level, | |
| .irq_set_affinity = ioapic_set_affinity, | |
| .irq_retrigger = irq_chip_retrigger_hierarchy, | |
| .irq_get_irqchip_state = ioapic_irq_get_chip_state, | |
| .flags = IRQCHIP_SKIP_SET_WAKE | | |
| IRQCHIP_AFFINITY_PRE_STARTUP, | |
| }; | |
| static inline void init_IO_APIC_traps(void) | |
| { | |
| struct irq_cfg *cfg; | |
| unsigned int irq; | |
| for_each_active_irq(irq) { | |
| cfg = irq_cfg(irq); | |
| if (IO_APIC_IRQ(irq) && cfg && !cfg->vector) { | |
| /* | |
| * Hmm.. We don't have an entry for this, so | |
| * default to an old-fashioned 8259 interrupt if we | |
| * can. Otherwise set the dummy interrupt chip. | |
| */ | |
| if (irq < nr_legacy_irqs()) | |
| legacy_pic->make_irq(irq); | |
| else | |
| irq_set_chip(irq, &no_irq_chip); | |
| } | |
| } | |
| } | |
| /* | |
| * The local APIC irq-chip implementation: | |
| */ | |
| static void mask_lapic_irq(struct irq_data *data) | |
| { | |
| unsigned long v = apic_read(APIC_LVT0); | |
| apic_write(APIC_LVT0, v | APIC_LVT_MASKED); | |
| } | |
| static void unmask_lapic_irq(struct irq_data *data) | |
| { | |
| unsigned long v = apic_read(APIC_LVT0); | |
| apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED); | |
| } | |
| static void ack_lapic_irq(struct irq_data *data) | |
| { | |
| apic_eoi(); | |
| } | |
| static struct irq_chip lapic_chip __read_mostly = { | |
| .name = "local-APIC", | |
| .irq_mask = mask_lapic_irq, | |
| .irq_unmask = unmask_lapic_irq, | |
| .irq_ack = ack_lapic_irq, | |
| }; | |
| static void lapic_register_intr(int irq) | |
| { | |
| irq_clear_status_flags(irq, IRQ_LEVEL); | |
| irq_set_chip_and_handler_name(irq, &lapic_chip, handle_edge_irq, "edge"); | |
| } | |
| /* | |
| * This looks a bit hackish but it's about the only one way of sending | |
| * a few INTA cycles to 8259As and any associated glue logic. ICR does | |
| * not support the ExtINT mode, unfortunately. We need to send these | |
| * cycles as some i82489DX-based boards have glue logic that keeps the | |
| * 8259A interrupt line asserted until INTA. --macro | |
| */ | |
| static inline void __init unlock_ExtINT_logic(void) | |
| { | |
| unsigned char save_control, save_freq_select; | |
| struct IO_APIC_route_entry entry0, entry1; | |
| int apic, pin, i; | |
| u32 apic_id; | |
| pin = find_isa_irq_pin(8, mp_INT); | |
| if (pin == -1) { | |
| WARN_ON_ONCE(1); | |
| return; | |
| } | |
| apic = find_isa_irq_apic(8, mp_INT); | |
| if (apic == -1) { | |
| WARN_ON_ONCE(1); | |
| return; | |
| } | |
| entry0 = ioapic_read_entry(apic, pin); | |
| clear_IO_APIC_pin(apic, pin); | |
| apic_id = read_apic_id(); | |
| memset(&entry1, 0, sizeof(entry1)); | |
| entry1.dest_mode_logical = true; | |
| entry1.masked = false; | |
| entry1.destid_0_7 = apic_id & 0xFF; | |
| entry1.virt_destid_8_14 = apic_id >> 8; | |
| entry1.delivery_mode = APIC_DELIVERY_MODE_EXTINT; | |
| entry1.active_low = entry0.active_low; | |
| entry1.is_level = false; | |
| entry1.vector = 0; | |
| ioapic_write_entry(apic, pin, entry1); | |
| save_control = CMOS_READ(RTC_CONTROL); | |
| save_freq_select = CMOS_READ(RTC_FREQ_SELECT); | |
| CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6, | |
| RTC_FREQ_SELECT); | |
| CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL); | |
| i = 100; | |
| while (i-- > 0) { | |
| mdelay(10); | |
| if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF) | |
| i -= 10; | |
| } | |
| CMOS_WRITE(save_control, RTC_CONTROL); | |
| CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); | |
| clear_IO_APIC_pin(apic, pin); | |
| ioapic_write_entry(apic, pin, entry0); | |
| } | |
| static int disable_timer_pin_1 __initdata; | |
| /* Actually the next is obsolete, but keep it for paranoid reasons -AK */ | |
| static int __init disable_timer_pin_setup(char *arg) | |
| { | |
| disable_timer_pin_1 = 1; | |
| return 0; | |
| } | |
| early_param("disable_timer_pin_1", disable_timer_pin_setup); | |
| static int __init mp_alloc_timer_irq(int ioapic, int pin) | |
| { | |
| struct irq_domain *domain = mp_ioapic_irqdomain(ioapic); | |
| int irq = -1; | |
| if (domain) { | |
| struct irq_alloc_info info; | |
| ioapic_set_alloc_attr(&info, NUMA_NO_NODE, 0, 0); | |
| info.devid = mpc_ioapic_id(ioapic); | |
| info.ioapic.pin = pin; | |
| guard(mutex)(&ioapic_mutex); | |
| irq = alloc_isa_irq_from_domain(domain, 0, ioapic, pin, &info); | |
| } | |
| return irq; | |
| } | |
| static void __init replace_pin_at_irq_node(struct mp_chip_data *data, int node, | |
| int oldapic, int oldpin, | |
| int newapic, int newpin) | |
| { | |
| struct irq_pin_list *entry; | |
| for_each_irq_pin(entry, data->irq_2_pin) { | |
| if (entry->apic == oldapic && entry->pin == oldpin) { | |
| entry->apic = newapic; | |
| entry->pin = newpin; | |
| return; | |
| } | |
| } | |
| /* Old apic/pin didn't exist, so just add a new one */ | |
| add_pin_to_irq_node(data, node, newapic, newpin); | |
| } | |
| /* | |
| * This code may look a bit paranoid, but it's supposed to cooperate with | |
| * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ | |
| * is so screwy. Thanks to Brian Perkins for testing/hacking this beast | |
| * fanatically on his truly buggy board. | |
| */ | |
| static inline void __init check_timer(void) | |
| { | |
| struct irq_data *irq_data = irq_get_irq_data(0); | |
| struct mp_chip_data *data = irq_data->chip_data; | |
| struct irq_cfg *cfg = irqd_cfg(irq_data); | |
| int node = cpu_to_node(0); | |
| int apic1, pin1, apic2, pin2; | |
| int no_pin1 = 0; | |
| if (!global_clock_event) | |
| return; | |
| local_irq_disable(); | |
| /* | |
| * get/set the timer IRQ vector: | |
| */ | |
| legacy_pic->mask(0); | |
| /* | |
| * As IRQ0 is to be enabled in the 8259A, the virtual | |
| * wire has to be disabled in the local APIC. Also | |
| * timer interrupts need to be acknowledged manually in | |
| * the 8259A for the i82489DX when using the NMI | |
| * watchdog as that APIC treats NMIs as level-triggered. | |
| * The AEOI mode will finish them in the 8259A | |
| * automatically. | |
| */ | |
| apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); | |
| legacy_pic->init(1); | |
| pin1 = find_isa_irq_pin(0, mp_INT); | |
| apic1 = find_isa_irq_apic(0, mp_INT); | |
| pin2 = ioapic_i8259.pin; | |
| apic2 = ioapic_i8259.apic; | |
| pr_info("..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n", | |
| cfg->vector, apic1, pin1, apic2, pin2); | |
| /* | |
| * Some BIOS writers are clueless and report the ExtINTA | |
| * I/O APIC input from the cascaded 8259A as the timer | |
| * interrupt input. So just in case, if only one pin | |
| * was found above, try it both directly and through the | |
| * 8259A. | |
| */ | |
| if (pin1 == -1) { | |
| panic_if_irq_remap(FW_BUG "Timer not connected to IO-APIC"); | |
| pin1 = pin2; | |
| apic1 = apic2; | |
| no_pin1 = 1; | |
| } else if (pin2 == -1) { | |
| pin2 = pin1; | |
| apic2 = apic1; | |
| } | |
| if (pin1 != -1) { | |
| /* Ok, does IRQ0 through the IOAPIC work? */ | |
| if (no_pin1) { | |
| mp_alloc_timer_irq(apic1, pin1); | |
| } else { | |
| /* | |
| * for edge trigger, it's already unmasked, | |
| * so only need to unmask if it is level-trigger | |
| * do we really have level trigger timer? | |
| */ | |
| int idx = find_irq_entry(apic1, pin1, mp_INT); | |
| if (idx != -1 && irq_is_level(idx)) | |
| unmask_ioapic_irq(irq_get_irq_data(0)); | |
| } | |
| irq_domain_deactivate_irq(irq_data); | |
| irq_domain_activate_irq(irq_data, false); | |
| if (timer_irq_works()) { | |
| if (disable_timer_pin_1 > 0) | |
| clear_IO_APIC_pin(0, pin1); | |
| goto out; | |
| } | |
| panic_if_irq_remap("timer doesn't work through Interrupt-remapped IO-APIC"); | |
| clear_IO_APIC_pin(apic1, pin1); | |
| if (!no_pin1) | |
| pr_err("..MP-BIOS bug: 8254 timer not connected to IO-APIC\n"); | |
| pr_info("...trying to set up timer (IRQ0) through the 8259A ...\n"); | |
| pr_info("..... (found apic %d pin %d) ...\n", apic2, pin2); | |
| /* | |
| * legacy devices should be connected to IO APIC #0 | |
| */ | |
| replace_pin_at_irq_node(data, node, apic1, pin1, apic2, pin2); | |
| irq_domain_deactivate_irq(irq_data); | |
| irq_domain_activate_irq(irq_data, false); | |
| legacy_pic->unmask(0); | |
| if (timer_irq_works()) { | |
| pr_info("....... works.\n"); | |
| goto out; | |
| } | |
| /* | |
| * Cleanup, just in case ... | |
| */ | |
| legacy_pic->mask(0); | |
| clear_IO_APIC_pin(apic2, pin2); | |
| pr_info("....... failed.\n"); | |
| } | |
| pr_info("...trying to set up timer as Virtual Wire IRQ...\n"); | |
| lapic_register_intr(0); | |
| apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector); /* Fixed mode */ | |
| legacy_pic->unmask(0); | |
| if (timer_irq_works()) { | |
| pr_info("..... works.\n"); | |
| goto out; | |
| } | |
| legacy_pic->mask(0); | |
| apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector); | |
| pr_info("..... failed.\n"); | |
| pr_info("...trying to set up timer as ExtINT IRQ...\n"); | |
| legacy_pic->init(0); | |
| legacy_pic->make_irq(0); | |
| apic_write(APIC_LVT0, APIC_DM_EXTINT); | |
| legacy_pic->unmask(0); | |
| unlock_ExtINT_logic(); | |
| if (timer_irq_works()) { | |
| pr_info("..... works.\n"); | |
| goto out; | |
| } | |
| pr_info("..... failed :\n"); | |
| if (apic_is_x2apic_enabled()) { | |
| pr_info("Perhaps problem with the pre-enabled x2apic mode\n" | |
| "Try booting with x2apic and interrupt-remapping disabled in the bios.\n"); | |
| } | |
| panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a " | |
| "report. Then try booting with the 'noapic' option.\n"); | |
| out: | |
| local_irq_enable(); | |
| } | |
| /* | |
| * Traditionally ISA IRQ2 is the cascade IRQ, and is not available | |
| * to devices. However there may be an I/O APIC pin available for | |
| * this interrupt regardless. The pin may be left unconnected, but | |
| * typically it will be reused as an ExtINT cascade interrupt for | |
| * the master 8259A. In the MPS case such a pin will normally be | |
| * reported as an ExtINT interrupt in the MP table. With ACPI | |
| * there is no provision for ExtINT interrupts, and in the absence | |
| * of an override it would be treated as an ordinary ISA I/O APIC | |
| * interrupt, that is edge-triggered and unmasked by default. We | |
| * used to do this, but it caused problems on some systems because | |
| * of the NMI watchdog and sometimes IRQ0 of the 8254 timer using | |
| * the same ExtINT cascade interrupt to drive the local APIC of the | |
| * bootstrap processor. Therefore we refrain from routing IRQ2 to | |
| * the I/O APIC in all cases now. No actual device should request | |
| * it anyway. --macro | |
| */ | |
| #define PIC_IRQS (1UL << PIC_CASCADE_IR) | |
| static int mp_irqdomain_create(int ioapic) | |
| { | |
| struct mp_ioapic_gsi *gsi_cfg = mp_ioapic_gsi_routing(ioapic); | |
| int hwirqs = mp_ioapic_pin_count(ioapic); | |
| struct ioapic *ip = &ioapics[ioapic]; | |
| struct ioapic_domain_cfg *cfg = &ip->irqdomain_cfg; | |
| struct irq_domain *parent; | |
| struct fwnode_handle *fn; | |
| struct irq_fwspec fwspec; | |
| if (cfg->type == IOAPIC_DOMAIN_INVALID) | |
| return 0; | |
| /* Handle device tree enumerated APICs proper */ | |
| if (cfg->dev) { | |
| fn = of_fwnode_handle(cfg->dev); | |
| } else { | |
| fn = irq_domain_alloc_named_id_fwnode("IO-APIC", mpc_ioapic_id(ioapic)); | |
| if (!fn) | |
| return -ENOMEM; | |
| } | |
| fwspec.fwnode = fn; | |
| fwspec.param_count = 1; | |
| fwspec.param[0] = mpc_ioapic_id(ioapic); | |
| parent = irq_find_matching_fwspec(&fwspec, DOMAIN_BUS_GENERIC_MSI); | |
| if (!parent) { | |
| if (!cfg->dev) | |
| irq_domain_free_fwnode(fn); | |
| return -ENODEV; | |
| } | |
| ip->irqdomain = irq_domain_create_hierarchy(parent, 0, hwirqs, fn, cfg->ops, | |
| (void *)(long)ioapic); | |
| if (!ip->irqdomain) { | |
| /* Release fw handle if it was allocated above */ | |
| if (!cfg->dev) | |
| irq_domain_free_fwnode(fn); | |
| return -ENOMEM; | |
| } | |
| if (cfg->type == IOAPIC_DOMAIN_LEGACY || cfg->type == IOAPIC_DOMAIN_STRICT) | |
| ioapic_dynirq_base = max(ioapic_dynirq_base, gsi_cfg->gsi_end + 1); | |
| return 0; | |
| } | |
| static void ioapic_destroy_irqdomain(int idx) | |
| { | |
| struct ioapic_domain_cfg *cfg = &ioapics[idx].irqdomain_cfg; | |
| struct fwnode_handle *fn = ioapics[idx].irqdomain->fwnode; | |
| if (ioapics[idx].irqdomain) { | |
| irq_domain_remove(ioapics[idx].irqdomain); | |
| if (!cfg->dev) | |
| irq_domain_free_fwnode(fn); | |
| ioapics[idx].irqdomain = NULL; | |
| } | |
| } | |
| void __init setup_IO_APIC(void) | |
| { | |
| int ioapic; | |
| if (ioapic_is_disabled || !nr_ioapics) | |
| return; | |
| io_apic_irqs = nr_legacy_irqs() ? ~PIC_IRQS : ~0UL; | |
| apic_pr_verbose("ENABLING IO-APIC IRQs\n"); | |
| for_each_ioapic(ioapic) | |
| BUG_ON(mp_irqdomain_create(ioapic)); | |
| /* Set up IO-APIC IRQ routing. */ | |
| x86_init.mpparse.setup_ioapic_ids(); | |
| sync_Arb_IDs(); | |
| setup_IO_APIC_irqs(); | |
| init_IO_APIC_traps(); | |
| if (nr_legacy_irqs()) | |
| check_timer(); | |
| ioapic_initialized = 1; | |
| } | |
| static void resume_ioapic_id(int ioapic_idx) | |
| { | |
| union IO_APIC_reg_00 reg_00; | |
| guard(raw_spinlock_irqsave)(&ioapic_lock); | |
| reg_00.raw = io_apic_read(ioapic_idx, 0); | |
| if (reg_00.bits.ID != mpc_ioapic_id(ioapic_idx)) { | |
| reg_00.bits.ID = mpc_ioapic_id(ioapic_idx); | |
| io_apic_write(ioapic_idx, 0, reg_00.raw); | |
| } | |
| } | |
| static int ioapic_suspend(void *data) | |
| { | |
| return save_ioapic_entries(); | |
| } | |
| static void ioapic_resume(void *data) | |
| { | |
| int ioapic_idx; | |
| for_each_ioapic_reverse(ioapic_idx) | |
| resume_ioapic_id(ioapic_idx); | |
| restore_ioapic_entries(); | |
| } | |
| static const struct syscore_ops ioapic_syscore_ops = { | |
| .suspend = ioapic_suspend, | |
| .resume = ioapic_resume, | |
| }; | |
| static struct syscore ioapic_syscore = { | |
| .ops = &ioapic_syscore_ops, | |
| }; | |
| static int __init ioapic_init_ops(void) | |
| { | |
| register_syscore(&ioapic_syscore); | |
| return 0; | |
| } | |
| device_initcall(ioapic_init_ops); | |
| static int io_apic_get_redir_entries(int ioapic) | |
| { | |
| union IO_APIC_reg_01 reg_01; | |
| guard(raw_spinlock_irqsave)(&ioapic_lock); | |
| reg_01.raw = io_apic_read(ioapic, 1); | |
| /* | |
| * The register returns the maximum index redir index supported, | |
| * which is one less than the total number of redir entries. | |
| */ | |
| return reg_01.bits.entries + 1; | |
| } | |
| unsigned int arch_dynirq_lower_bound(unsigned int from) | |
| { | |
| unsigned int ret; | |
| /* | |
| * dmar_alloc_hwirq() may be called before setup_IO_APIC(), so use | |
| * gsi_top if ioapic_dynirq_base hasn't been initialized yet. | |
| */ | |
| ret = ioapic_dynirq_base ? : gsi_top; | |
| /* | |
| * For DT enabled machines ioapic_dynirq_base is irrelevant and | |
| * always 0. gsi_top can be 0 if there is no IO/APIC registered. | |
| * 0 is an invalid interrupt number for dynamic allocations. Return | |
| * @from instead. | |
| */ | |
| return ret ? : from; | |
| } | |
| #ifdef CONFIG_X86_32 | |
| static int io_apic_get_unique_id(int ioapic, int apic_id) | |
| { | |
| static DECLARE_BITMAP(apic_id_map, MAX_LOCAL_APIC); | |
| const u32 broadcast_id = 0xF; | |
| union IO_APIC_reg_00 reg_00; | |
| int i = 0; | |
| /* Initialize the ID map */ | |
| if (bitmap_empty(apic_id_map, MAX_LOCAL_APIC)) | |
| copy_phys_cpu_present_map(apic_id_map); | |
| scoped_guard (raw_spinlock_irqsave, &ioapic_lock) | |
| reg_00.raw = io_apic_read(ioapic, 0); | |
| if (apic_id >= broadcast_id) { | |
| pr_warn("IOAPIC[%d]: Invalid apic_id %d, trying %d\n", | |
| ioapic, apic_id, reg_00.bits.ID); | |
| apic_id = reg_00.bits.ID; | |
| } | |
| /* Every APIC in a system must have a unique ID */ | |
| if (test_bit(apic_id, apic_id_map)) { | |
| for (i = 0; i < broadcast_id; i++) { | |
| if (!test_bit(i, apic_id_map)) | |
| break; | |
| } | |
| if (i == broadcast_id) | |
| panic("Max apic_id exceeded!\n"); | |
| pr_warn("IOAPIC[%d]: apic_id %d already used, trying %d\n", ioapic, apic_id, i); | |
| apic_id = i; | |
| } | |
| set_bit(apic_id, apic_id_map); | |
| if (reg_00.bits.ID != apic_id) { | |
| reg_00.bits.ID = apic_id; | |
| scoped_guard (raw_spinlock_irqsave, &ioapic_lock) { | |
| io_apic_write(ioapic, 0, reg_00.raw); | |
| reg_00.raw = io_apic_read(ioapic, 0); | |
| } | |
| /* Sanity check */ | |
| if (reg_00.bits.ID != apic_id) { | |
| pr_err("IOAPIC[%d]: Unable to change apic_id!\n", ioapic); | |
| return -1; | |
| } | |
| } | |
| apic_pr_verbose("IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id); | |
| return apic_id; | |
| } | |
| static u8 io_apic_unique_id(int idx, u8 id) | |
| { | |
| if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && !APIC_XAPIC(boot_cpu_apic_version)) | |
| return io_apic_get_unique_id(idx, id); | |
| return id; | |
| } | |
| #else | |
| static u8 io_apic_unique_id(int idx, u8 id) | |
| { | |
| union IO_APIC_reg_00 reg_00; | |
| DECLARE_BITMAP(used, 256); | |
| u8 new_id; | |
| int i; | |
| bitmap_zero(used, 256); | |
| for_each_ioapic(i) | |
| __set_bit(mpc_ioapic_id(i), used); | |
| /* Hand out the requested id if available */ | |
| if (!test_bit(id, used)) | |
| return id; | |
| /* | |
| * Read the current id from the ioapic and keep it if | |
| * available. | |
| */ | |
| scoped_guard (raw_spinlock_irqsave, &ioapic_lock) | |
| reg_00.raw = io_apic_read(idx, 0); | |
| new_id = reg_00.bits.ID; | |
| if (!test_bit(new_id, used)) { | |
| apic_pr_verbose("IOAPIC[%d]: Using reg apic_id %d instead of %d\n", | |
| idx, new_id, id); | |
| return new_id; | |
| } | |
| /* Get the next free id and write it to the ioapic. */ | |
| new_id = find_first_zero_bit(used, 256); | |
| reg_00.bits.ID = new_id; | |
| scoped_guard (raw_spinlock_irqsave, &ioapic_lock) { | |
| io_apic_write(idx, 0, reg_00.raw); | |
| reg_00.raw = io_apic_read(idx, 0); | |
| } | |
| /* Sanity check */ | |
| BUG_ON(reg_00.bits.ID != new_id); | |
| return new_id; | |
| } | |
| #endif | |
| static int io_apic_get_version(int ioapic) | |
| { | |
| union IO_APIC_reg_01 reg_01; | |
| guard(raw_spinlock_irqsave)(&ioapic_lock); | |
| reg_01.raw = io_apic_read(ioapic, 1); | |
| return reg_01.bits.version; | |
| } | |
| /* | |
| * This function updates target affinity of IOAPIC interrupts to include | |
| * the CPUs which came online during SMP bringup. | |
| */ | |
| #define IOAPIC_RESOURCE_NAME_SIZE 11 | |
| static struct resource *ioapic_resources; | |
| static struct resource * __init ioapic_setup_resources(void) | |
| { | |
| struct resource *res; | |
| unsigned long n; | |
| char *mem; | |
| int i; | |
| if (nr_ioapics == 0) | |
| return NULL; | |
| n = IOAPIC_RESOURCE_NAME_SIZE + sizeof(struct resource); | |
| n *= nr_ioapics; | |
| mem = memblock_alloc_or_panic(n, SMP_CACHE_BYTES); | |
| res = (void *)mem; | |
| mem += sizeof(struct resource) * nr_ioapics; | |
| for_each_ioapic(i) { | |
| res[i].name = mem; | |
| res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY; | |
| snprintf(mem, IOAPIC_RESOURCE_NAME_SIZE, "IOAPIC %u", i); | |
| mem += IOAPIC_RESOURCE_NAME_SIZE; | |
| ioapics[i].iomem_res = &res[i]; | |
| } | |
| ioapic_resources = res; | |
| return res; | |
| } | |
| static void io_apic_set_fixmap(enum fixed_addresses idx, phys_addr_t phys) | |
| { | |
| pgprot_t flags = FIXMAP_PAGE_NOCACHE; | |
| /* | |
| * Ensure fixmaps for IO-APIC MMIO respect memory encryption pgprot | |
| * bits, just like normal ioremap(): | |
| */ | |
| if (cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT)) { | |
| if (x86_platform.hyper.is_private_mmio(phys)) | |
| flags = pgprot_encrypted(flags); | |
| else | |
| flags = pgprot_decrypted(flags); | |
| } | |
| __set_fixmap(idx, phys, flags); | |
| } | |
| void __init io_apic_init_mappings(void) | |
| { | |
| unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0; | |
| struct resource *ioapic_res; | |
| int i; | |
| ioapic_res = ioapic_setup_resources(); | |
| for_each_ioapic(i) { | |
| if (smp_found_config) { | |
| ioapic_phys = mpc_ioapic_addr(i); | |
| #ifdef CONFIG_X86_32 | |
| if (!ioapic_phys) { | |
| pr_err("WARNING: bogus zero IO-APIC address found in MPTABLE, " | |
| "disabling IO/APIC support!\n"); | |
| smp_found_config = 0; | |
| ioapic_is_disabled = true; | |
| goto fake_ioapic_page; | |
| } | |
| #endif | |
| } else { | |
| #ifdef CONFIG_X86_32 | |
| fake_ioapic_page: | |
| #endif | |
| ioapic_phys = (unsigned long)memblock_alloc_or_panic(PAGE_SIZE, | |
| PAGE_SIZE); | |
| ioapic_phys = __pa(ioapic_phys); | |
| } | |
| io_apic_set_fixmap(idx, ioapic_phys); | |
| apic_pr_verbose("mapped IOAPIC to %08lx (%08lx)\n", | |
| __fix_to_virt(idx) + (ioapic_phys & ~PAGE_MASK), ioapic_phys); | |
| idx++; | |
| ioapic_res->start = ioapic_phys; | |
| ioapic_res->end = ioapic_phys + IO_APIC_SLOT_SIZE - 1; | |
| ioapic_res++; | |
| } | |
| } | |
| void __init ioapic_insert_resources(void) | |
| { | |
| struct resource *r = ioapic_resources; | |
| int i; | |
| if (!r) { | |
| if (nr_ioapics > 0) | |
| pr_err("IO APIC resources couldn't be allocated.\n"); | |
| return; | |
| } | |
| for_each_ioapic(i) { | |
| insert_resource(&iomem_resource, r); | |
| r++; | |
| } | |
| } | |
| int mp_find_ioapic(u32 gsi) | |
| { | |
| int i; | |
| if (nr_ioapics == 0) | |
| return -1; | |
| /* Find the IOAPIC that manages this GSI. */ | |
| for_each_ioapic(i) { | |
| struct mp_ioapic_gsi *gsi_cfg = mp_ioapic_gsi_routing(i); | |
| if (gsi >= gsi_cfg->gsi_base && gsi <= gsi_cfg->gsi_end) | |
| return i; | |
| } | |
| pr_err("ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); | |
| return -1; | |
| } | |
| int mp_find_ioapic_pin(int ioapic, u32 gsi) | |
| { | |
| struct mp_ioapic_gsi *gsi_cfg; | |
| if (WARN_ON(ioapic < 0)) | |
| return -1; | |
| gsi_cfg = mp_ioapic_gsi_routing(ioapic); | |
| if (WARN_ON(gsi > gsi_cfg->gsi_end)) | |
| return -1; | |
| return gsi - gsi_cfg->gsi_base; | |
| } | |
| static int bad_ioapic_register(int idx) | |
| { | |
| union IO_APIC_reg_00 reg_00; | |
| union IO_APIC_reg_01 reg_01; | |
| union IO_APIC_reg_02 reg_02; | |
| reg_00.raw = io_apic_read(idx, 0); | |
| reg_01.raw = io_apic_read(idx, 1); | |
| reg_02.raw = io_apic_read(idx, 2); | |
| if (reg_00.raw == -1 && reg_01.raw == -1 && reg_02.raw == -1) { | |
| pr_warn("I/O APIC 0x%x registers return all ones, skipping!\n", | |
| mpc_ioapic_addr(idx)); | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| static int find_free_ioapic_entry(void) | |
| { | |
| for (int idx = 0; idx < MAX_IO_APICS; idx++) { | |
| if (ioapics[idx].nr_registers == 0) | |
| return idx; | |
| } | |
| return MAX_IO_APICS; | |
| } | |
| /** | |
| * mp_register_ioapic - Register an IOAPIC device | |
| * @id: hardware IOAPIC ID | |
| * @address: physical address of IOAPIC register area | |
| * @gsi_base: base of GSI associated with the IOAPIC | |
| * @cfg: configuration information for the IOAPIC | |
| */ | |
| int mp_register_ioapic(int id, u32 address, u32 gsi_base, struct ioapic_domain_cfg *cfg) | |
| { | |
| bool hotplug = !!ioapic_initialized; | |
| struct mp_ioapic_gsi *gsi_cfg; | |
| int idx, ioapic, entries; | |
| u32 gsi_end; | |
| if (!address) { | |
| pr_warn("Bogus (zero) I/O APIC address found, skipping!\n"); | |
| return -EINVAL; | |
| } | |
| for_each_ioapic(ioapic) { | |
| if (ioapics[ioapic].mp_config.apicaddr == address) { | |
| pr_warn("address 0x%x conflicts with IOAPIC%d\n", address, ioapic); | |
| return -EEXIST; | |
| } | |
| } | |
| idx = find_free_ioapic_entry(); | |
| if (idx >= MAX_IO_APICS) { | |
| pr_warn("Max # of I/O APICs (%d) exceeded (found %d), skipping\n", | |
| MAX_IO_APICS, idx); | |
| return -ENOSPC; | |
| } | |
| ioapics[idx].mp_config.type = MP_IOAPIC; | |
| ioapics[idx].mp_config.flags = MPC_APIC_USABLE; | |
| ioapics[idx].mp_config.apicaddr = address; | |
| io_apic_set_fixmap(FIX_IO_APIC_BASE_0 + idx, address); | |
| if (bad_ioapic_register(idx)) { | |
| clear_fixmap(FIX_IO_APIC_BASE_0 + idx); | |
| return -ENODEV; | |
| } | |
| ioapics[idx].mp_config.apicid = io_apic_unique_id(idx, id); | |
| ioapics[idx].mp_config.apicver = io_apic_get_version(idx); | |
| /* | |
| * Build basic GSI lookup table to facilitate gsi->io_apic lookups | |
| * and to prevent reprogramming of IOAPIC pins (PCI GSIs). | |
| */ | |
| entries = io_apic_get_redir_entries(idx); | |
| gsi_end = gsi_base + entries - 1; | |
| for_each_ioapic(ioapic) { | |
| gsi_cfg = mp_ioapic_gsi_routing(ioapic); | |
| if ((gsi_base >= gsi_cfg->gsi_base && | |
| gsi_base <= gsi_cfg->gsi_end) || | |
| (gsi_end >= gsi_cfg->gsi_base && | |
| gsi_end <= gsi_cfg->gsi_end)) { | |
| pr_warn("GSI range [%u-%u] for new IOAPIC conflicts with GSI[%u-%u]\n", | |
| gsi_base, gsi_end, gsi_cfg->gsi_base, gsi_cfg->gsi_end); | |
| clear_fixmap(FIX_IO_APIC_BASE_0 + idx); | |
| return -ENOSPC; | |
| } | |
| } | |
| gsi_cfg = mp_ioapic_gsi_routing(idx); | |
| gsi_cfg->gsi_base = gsi_base; | |
| gsi_cfg->gsi_end = gsi_end; | |
| ioapics[idx].irqdomain = NULL; | |
| ioapics[idx].irqdomain_cfg = *cfg; | |
| /* | |
| * If mp_register_ioapic() is called during early boot stage when | |
| * walking ACPI/DT tables, it's too early to create irqdomain, | |
| * we are still using bootmem allocator. So delay it to setup_IO_APIC(). | |
| */ | |
| if (hotplug) { | |
| if (mp_irqdomain_create(idx)) { | |
| clear_fixmap(FIX_IO_APIC_BASE_0 + idx); | |
| return -ENOMEM; | |
| } | |
| alloc_ioapic_saved_registers(idx); | |
| } | |
| if (gsi_cfg->gsi_end >= gsi_top) | |
| gsi_top = gsi_cfg->gsi_end + 1; | |
| if (nr_ioapics <= idx) | |
| nr_ioapics = idx + 1; | |
| /* Set nr_registers to mark entry present */ | |
| ioapics[idx].nr_registers = entries; | |
| pr_info("IOAPIC[%d]: apic_id %d, version %d, address 0x%x, GSI %d-%d\n", | |
| idx, mpc_ioapic_id(idx), mpc_ioapic_ver(idx), mpc_ioapic_addr(idx), | |
| gsi_cfg->gsi_base, gsi_cfg->gsi_end); | |
| return 0; | |
| } | |
| int mp_unregister_ioapic(u32 gsi_base) | |
| { | |
| int ioapic, pin; | |
| int found = 0; | |
| for_each_ioapic(ioapic) { | |
| if (ioapics[ioapic].gsi_config.gsi_base == gsi_base) { | |
| found = 1; | |
| break; | |
| } | |
| } | |
| if (!found) { | |
| pr_warn("can't find IOAPIC for GSI %d\n", gsi_base); | |
| return -ENODEV; | |
| } | |
| for_each_pin(ioapic, pin) { | |
| u32 gsi = mp_pin_to_gsi(ioapic, pin); | |
| int irq = mp_map_gsi_to_irq(gsi, 0, NULL); | |
| struct mp_chip_data *data; | |
| if (irq >= 0) { | |
| data = irq_get_chip_data(irq); | |
| if (data && data->count) { | |
| pr_warn("pin%d on IOAPIC%d is still in use.\n", pin, ioapic); | |
| return -EBUSY; | |
| } | |
| } | |
| } | |
| /* Mark entry not present */ | |
| ioapics[ioapic].nr_registers = 0; | |
| ioapic_destroy_irqdomain(ioapic); | |
| free_ioapic_saved_registers(ioapic); | |
| if (ioapics[ioapic].iomem_res) | |
| release_resource(ioapics[ioapic].iomem_res); | |
| clear_fixmap(FIX_IO_APIC_BASE_0 + ioapic); | |
| memset(&ioapics[ioapic], 0, sizeof(ioapics[ioapic])); | |
| return 0; | |
| } | |
| int mp_ioapic_registered(u32 gsi_base) | |
| { | |
| int ioapic; | |
| for_each_ioapic(ioapic) | |
| if (ioapics[ioapic].gsi_config.gsi_base == gsi_base) | |
| return 1; | |
| return 0; | |
| } | |
| static void mp_irqdomain_get_attr(u32 gsi, struct mp_chip_data *data, | |
| struct irq_alloc_info *info) | |
| { | |
| if (info && info->ioapic.valid) { | |
| data->is_level = info->ioapic.is_level; | |
| data->active_low = info->ioapic.active_low; | |
| } else if (__acpi_get_override_irq(gsi, &data->is_level, &data->active_low) < 0) { | |
| /* PCI interrupts are always active low level triggered. */ | |
| data->is_level = true; | |
| data->active_low = true; | |
| } | |
| } | |
| /* | |
| * Configure the I/O-APIC specific fields in the routing entry. | |
| * | |
| * This is important to setup the I/O-APIC specific bits (is_level, | |
| * active_low, masked) because the underlying parent domain will only | |
| * provide the routing information and is oblivious of the I/O-APIC | |
| * specific bits. | |
| * | |
| * The entry is just preconfigured at this point and not written into the | |
| * RTE. This happens later during activation which will fill in the actual | |
| * routing information. | |
| */ | |
| static void mp_preconfigure_entry(struct mp_chip_data *data) | |
| { | |
| struct IO_APIC_route_entry *entry = &data->entry; | |
| memset(entry, 0, sizeof(*entry)); | |
| entry->is_level = data->is_level; | |
| entry->active_low = data->active_low; | |
| /* | |
| * Mask level triggered irqs. Edge triggered irqs are masked | |
| * by the irq core code in case they fire. | |
| */ | |
| entry->masked = data->is_level; | |
| } | |
| int mp_irqdomain_alloc(struct irq_domain *domain, unsigned int virq, | |
| unsigned int nr_irqs, void *arg) | |
| { | |
| struct irq_alloc_info *info = arg; | |
| struct mp_chip_data *data; | |
| struct irq_data *irq_data; | |
| int ret, ioapic, pin; | |
| unsigned long flags; | |
| if (!info || nr_irqs > 1) | |
| return -EINVAL; | |
| irq_data = irq_domain_get_irq_data(domain, virq); | |
| if (!irq_data) | |
| return -EINVAL; | |
| ioapic = mp_irqdomain_ioapic_idx(domain); | |
| pin = info->ioapic.pin; | |
| if (irq_resolve_mapping(domain, (irq_hw_number_t)pin)) | |
| return -EEXIST; | |
| data = kzalloc_obj(*data); | |
| if (!data) | |
| return -ENOMEM; | |
| ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, info); | |
| if (ret < 0) | |
| goto free_data; | |
| INIT_LIST_HEAD(&data->irq_2_pin); | |
| irq_data->hwirq = info->ioapic.pin; | |
| irq_data->chip = (domain->parent == x86_vector_domain) ? | |
| &ioapic_chip : &ioapic_ir_chip; | |
| irq_data->chip_data = data; | |
| mp_irqdomain_get_attr(mp_pin_to_gsi(ioapic, pin), data, info); | |
| if (!add_pin_to_irq_node(data, ioapic_alloc_attr_node(info), ioapic, pin)) { | |
| ret = -ENOMEM; | |
| goto free_irqs; | |
| } | |
| mp_preconfigure_entry(data); | |
| mp_register_handler(virq, data->is_level); | |
| local_irq_save(flags); | |
| if (virq < nr_legacy_irqs()) | |
| legacy_pic->mask(virq); | |
| local_irq_restore(flags); | |
| apic_pr_verbose("IOAPIC[%d]: Preconfigured routing entry (%d-%d -> IRQ %d Level:%i ActiveLow:%i)\n", | |
| ioapic, mpc_ioapic_id(ioapic), pin, virq, data->is_level, data->active_low); | |
| return 0; | |
| free_irqs: | |
| irq_domain_free_irqs_parent(domain, virq, nr_irqs); | |
| free_data: | |
| kfree(data); | |
| return ret; | |
| } | |
| void mp_irqdomain_free(struct irq_domain *domain, unsigned int virq, | |
| unsigned int nr_irqs) | |
| { | |
| struct irq_data *irq_data; | |
| struct mp_chip_data *data; | |
| BUG_ON(nr_irqs != 1); | |
| irq_data = irq_domain_get_irq_data(domain, virq); | |
| if (irq_data && irq_data->chip_data) { | |
| data = irq_data->chip_data; | |
| __remove_pin_from_irq(data, mp_irqdomain_ioapic_idx(domain), (int)irq_data->hwirq); | |
| WARN_ON(!list_empty(&data->irq_2_pin)); | |
| kfree(irq_data->chip_data); | |
| } | |
| irq_domain_free_irqs_top(domain, virq, nr_irqs); | |
| } | |
| int mp_irqdomain_activate(struct irq_domain *domain, struct irq_data *irq_data, bool reserve) | |
| { | |
| guard(raw_spinlock_irqsave)(&ioapic_lock); | |
| ioapic_configure_entry(irq_data); | |
| return 0; | |
| } | |
| void mp_irqdomain_deactivate(struct irq_domain *domain, | |
| struct irq_data *irq_data) | |
| { | |
| /* It won't be called for IRQ with multiple IOAPIC pins associated */ | |
| ioapic_mask_entry(mp_irqdomain_ioapic_idx(domain), (int)irq_data->hwirq); | |
| } | |
| int mp_irqdomain_ioapic_idx(struct irq_domain *domain) | |
| { | |
| return (int)(long)domain->host_data; | |
| } | |
| const struct irq_domain_ops mp_ioapic_irqdomain_ops = { | |
| .alloc = mp_irqdomain_alloc, | |
| .free = mp_irqdomain_free, | |
| .activate = mp_irqdomain_activate, | |
| .deactivate = mp_irqdomain_deactivate, | |
| }; |