| // SPDX-License-Identifier: GPL-2.0-only | |
| #define pr_fmt(fmt) "SMP alternatives: " fmt | |
| #include <linux/mmu_context.h> | |
| #include <linux/perf_event.h> | |
| #include <linux/vmalloc.h> | |
| #include <linux/memory.h> | |
| #include <linux/execmem.h> | |
| #include <linux/cleanup.h> | |
| #include <linux/kgdb.h> | |
| #include <linux/mmap_lock.h> | |
| #include <asm/text-patching.h> | |
| #include <asm/insn.h> | |
| #include <asm/insn-eval.h> | |
| #include <asm/ibt.h> | |
| #include <asm/set_memory.h> | |
| #include <asm/nmi.h> | |
| int __read_mostly alternatives_patched; | |
| EXPORT_SYMBOL_GPL(alternatives_patched); | |
| #define MAX_PATCH_LEN (255-1) | |
| #define DA_ALL (~0) | |
| #define DA_ALT 0x01 | |
| #define DA_RET 0x02 | |
| #define DA_RETPOLINE 0x04 | |
| #define DA_ENDBR 0x08 | |
| #define DA_SMP 0x10 | |
| static unsigned int debug_alternative; | |
| static int __init debug_alt(char *str) | |
| { | |
| if (str && *str == '=') | |
| str++; | |
| if (!str || kstrtouint(str, 0, &debug_alternative)) | |
| debug_alternative = DA_ALL; | |
| return 1; | |
| } | |
| __setup("debug-alternative", debug_alt); | |
| #define DPRINTK(type, fmt, args...) \ | |
| do { \ | |
| if (debug_alternative & DA_##type) \ | |
| printk(KERN_DEBUG pr_fmt(fmt) "\n", ##args); \ | |
| } while (0) | |
| #define DUMP_BYTES(type, buf, len, fmt, args...) \ | |
| do { \ | |
| if (unlikely(debug_alternative & DA_##type)) { \ | |
| int j; \ | |
| \ | |
| if (!(len)) \ | |
| break; \ | |
| \ | |
| printk(KERN_DEBUG pr_fmt(fmt), ##args); \ | |
| for (j = 0; j < (len) - 1; j++) \ | |
| printk(KERN_CONT "%02hhx ", buf[j]); \ | |
| printk(KERN_CONT "%02hhx\n", buf[j]); \ | |
| } \ | |
| } while (0) | |
| static const unsigned char x86nops[] = | |
| { | |
| BYTES_NOP1, | |
| BYTES_NOP2, | |
| BYTES_NOP3, | |
| BYTES_NOP4, | |
| BYTES_NOP5, | |
| BYTES_NOP6, | |
| BYTES_NOP7, | |
| BYTES_NOP8, | |
| #ifdef CONFIG_64BIT | |
| BYTES_NOP9, | |
| BYTES_NOP10, | |
| BYTES_NOP11, | |
| #endif | |
| }; | |
| const unsigned char * const x86_nops[ASM_NOP_MAX+1] = | |
| { | |
| NULL, | |
| x86nops, | |
| x86nops + 1, | |
| x86nops + 1 + 2, | |
| x86nops + 1 + 2 + 3, | |
| x86nops + 1 + 2 + 3 + 4, | |
| x86nops + 1 + 2 + 3 + 4 + 5, | |
| x86nops + 1 + 2 + 3 + 4 + 5 + 6, | |
| x86nops + 1 + 2 + 3 + 4 + 5 + 6 + 7, | |
| #ifdef CONFIG_64BIT | |
| x86nops + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8, | |
| x86nops + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8 + 9, | |
| x86nops + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8 + 9 + 10, | |
| #endif | |
| }; | |
| #ifdef CONFIG_FINEIBT | |
| static bool cfi_paranoid __ro_after_init; | |
| #endif | |
| #ifdef CONFIG_MITIGATION_ITS | |
| #ifdef CONFIG_MODULES | |
| static struct module *its_mod; | |
| #endif | |
| static void *its_page; | |
| static unsigned int its_offset; | |
| struct its_array its_pages; | |
| static void *__its_alloc(struct its_array *pages) | |
| { | |
| void *page __free(execmem) = execmem_alloc_rw(EXECMEM_MODULE_TEXT, PAGE_SIZE); | |
| if (!page) | |
| return NULL; | |
| void *tmp = krealloc(pages->pages, (pages->num+1) * sizeof(void *), | |
| GFP_KERNEL); | |
| if (!tmp) | |
| return NULL; | |
| pages->pages = tmp; | |
| pages->pages[pages->num++] = page; | |
| return no_free_ptr(page); | |
| } | |
| /* Initialize a thunk with the "jmp *reg; int3" instructions. */ | |
| static void *its_init_thunk(void *thunk, int reg) | |
| { | |
| u8 *bytes = thunk; | |
| int offset = 0; | |
| int i = 0; | |
| #ifdef CONFIG_FINEIBT | |
| if (cfi_paranoid) { | |
| /* | |
| * When ITS uses indirect branch thunk the fineibt_paranoid | |
| * caller sequence doesn't fit in the caller site. So put the | |
| * remaining part of the sequence (UDB + JNE) into the ITS | |
| * thunk. | |
| */ | |
| bytes[i++] = 0xd6; /* UDB */ | |
| bytes[i++] = 0x75; /* JNE */ | |
| bytes[i++] = 0xfd; | |
| offset = 1; | |
| } | |
| #endif | |
| if (reg >= 8) { | |
| bytes[i++] = 0x41; /* REX.B prefix */ | |
| reg -= 8; | |
| } | |
| bytes[i++] = 0xff; | |
| bytes[i++] = 0xe0 + reg; /* JMP *reg */ | |
| bytes[i++] = 0xcc; | |
| return thunk + offset; | |
| } | |
| static void its_pages_protect(struct its_array *pages) | |
| { | |
| for (int i = 0; i < pages->num; i++) { | |
| void *page = pages->pages[i]; | |
| execmem_restore_rox(page, PAGE_SIZE); | |
| } | |
| } | |
| static void its_fini_core(void) | |
| { | |
| if (IS_ENABLED(CONFIG_STRICT_KERNEL_RWX)) | |
| its_pages_protect(&its_pages); | |
| kfree(its_pages.pages); | |
| } | |
| #ifdef CONFIG_MODULES | |
| void its_init_mod(struct module *mod) | |
| { | |
| if (!cpu_feature_enabled(X86_FEATURE_INDIRECT_THUNK_ITS)) | |
| return; | |
| mutex_lock(&text_mutex); | |
| its_mod = mod; | |
| its_page = NULL; | |
| } | |
| void its_fini_mod(struct module *mod) | |
| { | |
| if (!cpu_feature_enabled(X86_FEATURE_INDIRECT_THUNK_ITS)) | |
| return; | |
| WARN_ON_ONCE(its_mod != mod); | |
| its_mod = NULL; | |
| its_page = NULL; | |
| mutex_unlock(&text_mutex); | |
| if (IS_ENABLED(CONFIG_STRICT_MODULE_RWX)) | |
| its_pages_protect(&mod->arch.its_pages); | |
| } | |
| void its_free_mod(struct module *mod) | |
| { | |
| if (!cpu_feature_enabled(X86_FEATURE_INDIRECT_THUNK_ITS)) | |
| return; | |
| for (int i = 0; i < mod->arch.its_pages.num; i++) { | |
| void *page = mod->arch.its_pages.pages[i]; | |
| execmem_free(page); | |
| } | |
| kfree(mod->arch.its_pages.pages); | |
| } | |
| #endif /* CONFIG_MODULES */ | |
| static void *its_alloc(void) | |
| { | |
| struct its_array *pages = &its_pages; | |
| void *page; | |
| #ifdef CONFIG_MODULES | |
| if (its_mod) | |
| pages = &its_mod->arch.its_pages; | |
| #endif | |
| page = __its_alloc(pages); | |
| if (!page) | |
| return NULL; | |
| if (pages == &its_pages) | |
| set_memory_x((unsigned long)page, 1); | |
| return page; | |
| } | |
| static void *its_allocate_thunk(int reg) | |
| { | |
| int size = 3 + (reg / 8); | |
| void *thunk; | |
| #ifdef CONFIG_FINEIBT | |
| /* | |
| * The ITS thunk contains an indirect jump and an int3 instruction so | |
| * its size is 3 or 4 bytes depending on the register used. If CFI | |
| * paranoid is used then 3 extra bytes are added in the ITS thunk to | |
| * complete the fineibt_paranoid caller sequence. | |
| */ | |
| if (cfi_paranoid) | |
| size += 3; | |
| #endif | |
| if (!its_page || (its_offset + size - 1) >= PAGE_SIZE) { | |
| its_page = its_alloc(); | |
| if (!its_page) { | |
| pr_err("ITS page allocation failed\n"); | |
| return NULL; | |
| } | |
| memset(its_page, INT3_INSN_OPCODE, PAGE_SIZE); | |
| its_offset = 32; | |
| } | |
| /* | |
| * If the indirect branch instruction will be in the lower half | |
| * of a cacheline, then update the offset to reach the upper half. | |
| */ | |
| if ((its_offset + size - 1) % 64 < 32) | |
| its_offset = ((its_offset - 1) | 0x3F) + 33; | |
| thunk = its_page + its_offset; | |
| its_offset += size; | |
| return its_init_thunk(thunk, reg); | |
| } | |
| u8 *its_static_thunk(int reg) | |
| { | |
| u8 *thunk = __x86_indirect_its_thunk_array[reg]; | |
| #ifdef CONFIG_FINEIBT | |
| /* Paranoid thunk starts 2 bytes before */ | |
| if (cfi_paranoid) | |
| return thunk - 2; | |
| #endif | |
| return thunk; | |
| } | |
| #else | |
| static inline void its_fini_core(void) {} | |
| #endif /* CONFIG_MITIGATION_ITS */ | |
| /* | |
| * Nomenclature for variable names to simplify and clarify this code and ease | |
| * any potential staring at it: | |
| * | |
| * @instr: source address of the original instructions in the kernel text as | |
| * generated by the compiler. | |
| * | |
| * @buf: temporary buffer on which the patching operates. This buffer is | |
| * eventually text-poked into the kernel image. | |
| * | |
| * @replacement/@repl: pointer to the opcodes which are replacing @instr, located | |
| * in the .altinstr_replacement section. | |
| */ | |
| /* | |
| * Fill the buffer with a single effective instruction of size @len. | |
| * | |
| * In order not to issue an ORC stack depth tracking CFI entry (Call Frame Info) | |
| * for every single-byte NOP, try to generate the maximally available NOP of | |
| * size <= ASM_NOP_MAX such that only a single CFI entry is generated (vs one for | |
| * each single-byte NOPs). If @len to fill out is > ASM_NOP_MAX, pad with INT3 and | |
| * *jump* over instead of executing long and daft NOPs. | |
| */ | |
| static void add_nop(u8 *buf, unsigned int len) | |
| { | |
| u8 *target = buf + len; | |
| if (!len) | |
| return; | |
| if (len <= ASM_NOP_MAX) { | |
| memcpy(buf, x86_nops[len], len); | |
| return; | |
| } | |
| if (len < 128) { | |
| __text_gen_insn(buf, JMP8_INSN_OPCODE, buf, target, JMP8_INSN_SIZE); | |
| buf += JMP8_INSN_SIZE; | |
| } else { | |
| __text_gen_insn(buf, JMP32_INSN_OPCODE, buf, target, JMP32_INSN_SIZE); | |
| buf += JMP32_INSN_SIZE; | |
| } | |
| for (;buf < target; buf++) | |
| *buf = INT3_INSN_OPCODE; | |
| } | |
| /* | |
| * Find the offset of the first non-NOP instruction starting at @offset | |
| * but no further than @len. | |
| */ | |
| static int skip_nops(u8 *buf, int offset, int len) | |
| { | |
| struct insn insn; | |
| for (; offset < len; offset += insn.length) { | |
| if (insn_decode_kernel(&insn, &buf[offset])) | |
| break; | |
| if (!insn_is_nop(&insn)) | |
| break; | |
| } | |
| return offset; | |
| } | |
| /* | |
| * "noinline" to cause control flow change and thus invalidate I$ and | |
| * cause refetch after modification. | |
| */ | |
| static void noinline optimize_nops(const u8 * const instr, u8 *buf, size_t len) | |
| { | |
| for (int next, i = 0; i < len; i = next) { | |
| struct insn insn; | |
| if (insn_decode_kernel(&insn, &buf[i])) | |
| return; | |
| next = i + insn.length; | |
| if (insn_is_nop(&insn)) { | |
| int nop = i; | |
| /* Has the NOP already been optimized? */ | |
| if (i + insn.length == len) | |
| return; | |
| next = skip_nops(buf, next, len); | |
| add_nop(buf + nop, next - nop); | |
| DUMP_BYTES(ALT, buf, len, "%px: [%d:%d) optimized NOPs: ", instr, nop, next); | |
| } | |
| } | |
| } | |
| /* | |
| * In this context, "source" is where the instructions are placed in the | |
| * section .altinstr_replacement, for example during kernel build by the | |
| * toolchain. | |
| * "Destination" is where the instructions are being patched in by this | |
| * machinery. | |
| * | |
| * The source offset is: | |
| * | |
| * src_imm = target - src_next_ip (1) | |
| * | |
| * and the target offset is: | |
| * | |
| * dst_imm = target - dst_next_ip (2) | |
| * | |
| * so rework (1) as an expression for target like: | |
| * | |
| * target = src_imm + src_next_ip (1a) | |
| * | |
| * and substitute in (2) to get: | |
| * | |
| * dst_imm = (src_imm + src_next_ip) - dst_next_ip (3) | |
| * | |
| * Now, since the instruction stream is 'identical' at src and dst (it | |
| * is being copied after all) it can be stated that: | |
| * | |
| * src_next_ip = src + ip_offset | |
| * dst_next_ip = dst + ip_offset (4) | |
| * | |
| * Substitute (4) in (3) and observe ip_offset being cancelled out to | |
| * obtain: | |
| * | |
| * dst_imm = src_imm + (src + ip_offset) - (dst + ip_offset) | |
| * = src_imm + src - dst + ip_offset - ip_offset | |
| * = src_imm + src - dst (5) | |
| * | |
| * IOW, only the relative displacement of the code block matters. | |
| */ | |
| #define apply_reloc_n(n_, p_, d_) \ | |
| do { \ | |
| s32 v = *(s##n_ *)(p_); \ | |
| v += (d_); \ | |
| BUG_ON((v >> 31) != (v >> (n_-1))); \ | |
| *(s##n_ *)(p_) = (s##n_)v; \ | |
| } while (0) | |
| static __always_inline | |
| void apply_reloc(int n, void *ptr, uintptr_t diff) | |
| { | |
| switch (n) { | |
| case 1: apply_reloc_n(8, ptr, diff); break; | |
| case 2: apply_reloc_n(16, ptr, diff); break; | |
| case 4: apply_reloc_n(32, ptr, diff); break; | |
| default: BUG(); | |
| } | |
| } | |
| static __always_inline | |
| bool need_reloc(unsigned long offset, u8 *src, size_t src_len) | |
| { | |
| u8 *target = src + offset; | |
| /* | |
| * If the target is inside the patched block, it's relative to the | |
| * block itself and does not need relocation. | |
| */ | |
| return (target < src || target > src + src_len); | |
| } | |
| static void __apply_relocation(u8 *buf, const u8 * const instr, size_t instrlen, u8 *repl, size_t repl_len) | |
| { | |
| for (int next, i = 0; i < instrlen; i = next) { | |
| struct insn insn; | |
| if (WARN_ON_ONCE(insn_decode_kernel(&insn, &buf[i]))) | |
| return; | |
| next = i + insn.length; | |
| switch (insn.opcode.bytes[0]) { | |
| case 0x0f: | |
| if (insn.opcode.bytes[1] < 0x80 || | |
| insn.opcode.bytes[1] > 0x8f) | |
| break; | |
| fallthrough; /* Jcc.d32 */ | |
| case 0x70 ... 0x7f: /* Jcc.d8 */ | |
| case JMP8_INSN_OPCODE: | |
| case JMP32_INSN_OPCODE: | |
| case CALL_INSN_OPCODE: | |
| if (need_reloc(next + insn.immediate.value, repl, repl_len)) { | |
| apply_reloc(insn.immediate.nbytes, | |
| buf + i + insn_offset_immediate(&insn), | |
| repl - instr); | |
| } | |
| /* | |
| * Where possible, convert JMP.d32 into JMP.d8. | |
| */ | |
| if (insn.opcode.bytes[0] == JMP32_INSN_OPCODE) { | |
| s32 imm = insn.immediate.value; | |
| imm += repl - instr; | |
| imm += JMP32_INSN_SIZE - JMP8_INSN_SIZE; | |
| if ((imm >> 31) == (imm >> 7)) { | |
| buf[i+0] = JMP8_INSN_OPCODE; | |
| buf[i+1] = (s8)imm; | |
| memset(&buf[i+2], INT3_INSN_OPCODE, insn.length - 2); | |
| } | |
| } | |
| break; | |
| } | |
| if (insn_rip_relative(&insn)) { | |
| if (need_reloc(next + insn.displacement.value, repl, repl_len)) { | |
| apply_reloc(insn.displacement.nbytes, | |
| buf + i + insn_offset_displacement(&insn), | |
| repl - instr); | |
| } | |
| } | |
| } | |
| } | |
| void text_poke_apply_relocation(u8 *buf, const u8 * const instr, size_t instrlen, u8 *repl, size_t repl_len) | |
| { | |
| __apply_relocation(buf, instr, instrlen, repl, repl_len); | |
| optimize_nops(instr, buf, instrlen); | |
| } | |
| /* Low-level backend functions usable from alternative code replacements. */ | |
| DEFINE_ASM_FUNC(nop_func, "", .entry.text); | |
| EXPORT_SYMBOL_GPL(nop_func); | |
| noinstr void BUG_func(void) | |
| { | |
| BUG(); | |
| } | |
| EXPORT_SYMBOL(BUG_func); | |
| #define CALL_RIP_REL_OPCODE 0xff | |
| #define CALL_RIP_REL_MODRM 0x15 | |
| /* | |
| * Rewrite the "call BUG_func" replacement to point to the target of the | |
| * indirect pv_ops call "call *disp(%ip)". | |
| */ | |
| static unsigned int alt_replace_call(u8 *instr, u8 *insn_buff, struct alt_instr *a) | |
| { | |
| void *target, *bug = &BUG_func; | |
| s32 disp; | |
| if (a->replacementlen != 5 || insn_buff[0] != CALL_INSN_OPCODE) { | |
| pr_err("ALT_FLAG_DIRECT_CALL set for a non-call replacement instruction\n"); | |
| BUG(); | |
| } | |
| if (a->instrlen != 6 || | |
| instr[0] != CALL_RIP_REL_OPCODE || | |
| instr[1] != CALL_RIP_REL_MODRM) { | |
| pr_err("ALT_FLAG_DIRECT_CALL set for unrecognized indirect call\n"); | |
| BUG(); | |
| } | |
| /* Skip CALL_RIP_REL_OPCODE and CALL_RIP_REL_MODRM */ | |
| disp = *(s32 *)(instr + 2); | |
| #ifdef CONFIG_X86_64 | |
| /* ff 15 00 00 00 00 call *0x0(%rip) */ | |
| /* target address is stored at "next instruction + disp". */ | |
| target = *(void **)(instr + a->instrlen + disp); | |
| #else | |
| /* ff 15 00 00 00 00 call *0x0 */ | |
| /* target address is stored at disp. */ | |
| target = *(void **)disp; | |
| #endif | |
| if (!target) | |
| target = bug; | |
| /* (BUG_func - .) + (target - BUG_func) := target - . */ | |
| *(s32 *)(insn_buff + 1) += target - bug; | |
| if (target == &nop_func) | |
| return 0; | |
| return 5; | |
| } | |
| static inline u8 * instr_va(struct alt_instr *i) | |
| { | |
| return (u8 *)&i->instr_offset + i->instr_offset; | |
| } | |
| struct patch_site { | |
| u8 *instr; | |
| struct alt_instr *alt; | |
| u8 buff[MAX_PATCH_LEN]; | |
| u8 len; | |
| }; | |
| static struct alt_instr * __init_or_module analyze_patch_site(struct patch_site *ps, | |
| struct alt_instr *start, | |
| struct alt_instr *end) | |
| { | |
| struct alt_instr *alt = start; | |
| ps->instr = instr_va(start); | |
| /* | |
| * In case of nested ALTERNATIVE()s the outer alternative might add | |
| * more padding. To ensure consistent patching find the max padding for | |
| * all alt_instr entries for this site (nested alternatives result in | |
| * consecutive entries). | |
| * Find the last alt_instr eligible for patching at the site. | |
| */ | |
| for (; alt < end && instr_va(alt) == ps->instr; alt++) { | |
| ps->len = max(ps->len, alt->instrlen); | |
| BUG_ON(alt->cpuid >= (NCAPINTS + NBUGINTS) * 32); | |
| /* | |
| * Patch if either: | |
| * - feature is present | |
| * - feature not present but ALT_FLAG_NOT is set to mean, | |
| * patch if feature is *NOT* present. | |
| */ | |
| if (!boot_cpu_has(alt->cpuid) != !(alt->flags & ALT_FLAG_NOT)) | |
| ps->alt = alt; | |
| } | |
| BUG_ON(ps->len > sizeof(ps->buff)); | |
| return alt; | |
| } | |
| static void __init_or_module prep_patch_site(struct patch_site *ps) | |
| { | |
| struct alt_instr *alt = ps->alt; | |
| u8 buff_sz; | |
| u8 *repl; | |
| if (!alt) { | |
| /* Nothing to patch, use original instruction. */ | |
| memcpy(ps->buff, ps->instr, ps->len); | |
| return; | |
| } | |
| repl = (u8 *)&alt->repl_offset + alt->repl_offset; | |
| DPRINTK(ALT, "feat: %d*32+%d, old: (%pS (%px) len: %d), repl: (%px, len: %d) flags: 0x%x", | |
| alt->cpuid >> 5, alt->cpuid & 0x1f, | |
| ps->instr, ps->instr, ps->len, | |
| repl, alt->replacementlen, alt->flags); | |
| memcpy(ps->buff, repl, alt->replacementlen); | |
| buff_sz = alt->replacementlen; | |
| if (alt->flags & ALT_FLAG_DIRECT_CALL) | |
| buff_sz = alt_replace_call(ps->instr, ps->buff, alt); | |
| for (; buff_sz < ps->len; buff_sz++) | |
| ps->buff[buff_sz] = 0x90; | |
| __apply_relocation(ps->buff, ps->instr, ps->len, repl, alt->replacementlen); | |
| DUMP_BYTES(ALT, ps->instr, ps->len, "%px: old_insn: ", ps->instr); | |
| DUMP_BYTES(ALT, repl, alt->replacementlen, "%px: rpl_insn: ", repl); | |
| DUMP_BYTES(ALT, ps->buff, ps->len, "%px: final_insn: ", ps->instr); | |
| } | |
| static void __init_or_module patch_site(struct patch_site *ps) | |
| { | |
| optimize_nops(ps->instr, ps->buff, ps->len); | |
| text_poke_early(ps->instr, ps->buff, ps->len); | |
| } | |
| /* | |
| * Replace instructions with better alternatives for this CPU type. This runs | |
| * before SMP is initialized to avoid SMP problems with self modifying code. | |
| * This implies that asymmetric systems where APs have less capabilities than | |
| * the boot processor are not handled. Tough. Make sure you disable such | |
| * features by hand. | |
| * | |
| * Marked "noinline" to cause control flow change and thus insn cache | |
| * to refetch changed I$ lines. | |
| */ | |
| void __init_or_module noinline apply_alternatives(struct alt_instr *start, | |
| struct alt_instr *end) | |
| { | |
| struct alt_instr *a; | |
| DPRINTK(ALT, "alt table %px, -> %px", start, end); | |
| /* | |
| * KASAN_SHADOW_START is defined using | |
| * cpu_feature_enabled(X86_FEATURE_LA57) and is therefore patched here. | |
| * During the process, KASAN becomes confused seeing partial LA57 | |
| * conversion and triggers a false-positive out-of-bound report. | |
| * | |
| * Disable KASAN until the patching is complete. | |
| */ | |
| kasan_disable_current(); | |
| /* | |
| * The scan order should be from start to end. A later scanned | |
| * alternative code can overwrite previously scanned alternative code. | |
| * Some kernel functions (e.g. memcpy, memset, etc) use this order to | |
| * patch code. | |
| * | |
| * So be careful if you want to change the scan order to any other | |
| * order. | |
| */ | |
| a = start; | |
| while (a < end) { | |
| struct patch_site ps = { | |
| .alt = NULL, | |
| .len = 0 | |
| }; | |
| a = analyze_patch_site(&ps, a, end); | |
| prep_patch_site(&ps); | |
| patch_site(&ps); | |
| } | |
| kasan_enable_current(); | |
| } | |
| static inline bool is_jcc32(struct insn *insn) | |
| { | |
| /* Jcc.d32 second opcode byte is in the range: 0x80-0x8f */ | |
| return insn->opcode.bytes[0] == 0x0f && (insn->opcode.bytes[1] & 0xf0) == 0x80; | |
| } | |
| #if defined(CONFIG_MITIGATION_RETPOLINE) && defined(CONFIG_OBJTOOL) | |
| /* | |
| * [CS]{,3} CALL/JMP *%\reg [INT3]* | |
| */ | |
| static int emit_indirect(int op, int reg, u8 *bytes, int len) | |
| { | |
| int cs = 0, bp = 0; | |
| int i = 0; | |
| u8 modrm; | |
| /* | |
| * Set @len to the excess bytes after writing the instruction. | |
| */ | |
| len -= 2 + (reg >= 8); | |
| WARN_ON_ONCE(len < 0); | |
| switch (op) { | |
| case CALL_INSN_OPCODE: | |
| modrm = 0x10; /* Reg = 2; CALL r/m */ | |
| /* | |
| * Additional NOP is better than prefix decode penalty. | |
| */ | |
| if (len <= 3) | |
| cs = len; | |
| break; | |
| case JMP32_INSN_OPCODE: | |
| modrm = 0x20; /* Reg = 4; JMP r/m */ | |
| bp = len; | |
| break; | |
| default: | |
| WARN_ON_ONCE(1); | |
| return -1; | |
| } | |
| while (cs--) | |
| bytes[i++] = 0x2e; /* CS-prefix */ | |
| if (reg >= 8) { | |
| bytes[i++] = 0x41; /* REX.B prefix */ | |
| reg -= 8; | |
| } | |
| modrm |= 0xc0; /* Mod = 3 */ | |
| modrm += reg; | |
| bytes[i++] = 0xff; /* opcode */ | |
| bytes[i++] = modrm; | |
| while (bp--) | |
| bytes[i++] = 0xcc; /* INT3 */ | |
| return i; | |
| } | |
| static int __emit_trampoline(void *addr, struct insn *insn, u8 *bytes, | |
| void *call_dest, void *jmp_dest) | |
| { | |
| u8 op = insn->opcode.bytes[0]; | |
| int i = 0; | |
| /* | |
| * Clang does 'weird' Jcc __x86_indirect_thunk_r11 conditional | |
| * tail-calls. Deal with them. | |
| */ | |
| if (is_jcc32(insn)) { | |
| bytes[i++] = op; | |
| op = insn->opcode.bytes[1]; | |
| goto clang_jcc; | |
| } | |
| if (insn->length == 6) | |
| bytes[i++] = 0x2e; /* CS-prefix */ | |
| switch (op) { | |
| case CALL_INSN_OPCODE: | |
| __text_gen_insn(bytes+i, op, addr+i, | |
| call_dest, | |
| CALL_INSN_SIZE); | |
| i += CALL_INSN_SIZE; | |
| break; | |
| case JMP32_INSN_OPCODE: | |
| clang_jcc: | |
| __text_gen_insn(bytes+i, op, addr+i, | |
| jmp_dest, | |
| JMP32_INSN_SIZE); | |
| i += JMP32_INSN_SIZE; | |
| break; | |
| default: | |
| WARN(1, "%pS %px %*ph\n", addr, addr, 6, addr); | |
| return -1; | |
| } | |
| WARN_ON_ONCE(i != insn->length); | |
| return i; | |
| } | |
| static int emit_call_track_retpoline(void *addr, struct insn *insn, int reg, u8 *bytes) | |
| { | |
| return __emit_trampoline(addr, insn, bytes, | |
| __x86_indirect_call_thunk_array[reg], | |
| __x86_indirect_jump_thunk_array[reg]); | |
| } | |
| #ifdef CONFIG_MITIGATION_ITS | |
| static int emit_its_trampoline(void *addr, struct insn *insn, int reg, u8 *bytes) | |
| { | |
| u8 *thunk = __x86_indirect_its_thunk_array[reg]; | |
| u8 *tmp = its_allocate_thunk(reg); | |
| if (tmp) | |
| thunk = tmp; | |
| return __emit_trampoline(addr, insn, bytes, thunk, thunk); | |
| } | |
| /* Check if an indirect branch is at ITS-unsafe address */ | |
| static bool cpu_wants_indirect_its_thunk_at(unsigned long addr, int reg) | |
| { | |
| if (!cpu_feature_enabled(X86_FEATURE_INDIRECT_THUNK_ITS)) | |
| return false; | |
| /* Indirect branch opcode is 2 or 3 bytes depending on reg */ | |
| addr += 1 + reg / 8; | |
| /* Lower-half of the cacheline? */ | |
| return !(addr & 0x20); | |
| } | |
| #else /* CONFIG_MITIGATION_ITS */ | |
| #ifdef CONFIG_FINEIBT | |
| static bool cpu_wants_indirect_its_thunk_at(unsigned long addr, int reg) | |
| { | |
| return false; | |
| } | |
| #endif | |
| #endif /* CONFIG_MITIGATION_ITS */ | |
| /* | |
| * Rewrite the compiler generated retpoline thunk calls. | |
| * | |
| * For spectre_v2=off (!X86_FEATURE_RETPOLINE), rewrite them into immediate | |
| * indirect instructions, avoiding the extra indirection. | |
| * | |
| * For example, convert: | |
| * | |
| * CALL __x86_indirect_thunk_\reg | |
| * | |
| * into: | |
| * | |
| * CALL *%\reg | |
| * | |
| * It also tries to inline spectre_v2=retpoline,lfence when size permits. | |
| */ | |
| static int patch_retpoline(void *addr, struct insn *insn, u8 *bytes) | |
| { | |
| retpoline_thunk_t *target; | |
| int reg, ret, i = 0; | |
| u8 op, cc; | |
| target = addr + insn->length + insn->immediate.value; | |
| reg = target - __x86_indirect_thunk_array; | |
| if (WARN_ON_ONCE(reg & ~0xf)) | |
| return -1; | |
| /* If anyone ever does: CALL/JMP *%rsp, we're in deep trouble. */ | |
| BUG_ON(reg == 4); | |
| if (cpu_feature_enabled(X86_FEATURE_RETPOLINE) && | |
| !cpu_feature_enabled(X86_FEATURE_RETPOLINE_LFENCE)) { | |
| if (cpu_feature_enabled(X86_FEATURE_CALL_DEPTH)) | |
| return emit_call_track_retpoline(addr, insn, reg, bytes); | |
| return -1; | |
| } | |
| op = insn->opcode.bytes[0]; | |
| /* | |
| * Convert: | |
| * | |
| * Jcc.d32 __x86_indirect_thunk_\reg | |
| * | |
| * into: | |
| * | |
| * Jncc.d8 1f | |
| * [ LFENCE ] | |
| * JMP *%\reg | |
| * [ NOP ] | |
| * 1: | |
| */ | |
| if (is_jcc32(insn)) { | |
| cc = insn->opcode.bytes[1] & 0xf; | |
| cc ^= 1; /* invert condition */ | |
| bytes[i++] = 0x70 + cc; /* Jcc.d8 */ | |
| bytes[i++] = insn->length - 2; /* sizeof(Jcc.d8) == 2 */ | |
| /* Continue as if: JMP.d32 __x86_indirect_thunk_\reg */ | |
| op = JMP32_INSN_OPCODE; | |
| } | |
| /* | |
| * For RETPOLINE_LFENCE: prepend the indirect CALL/JMP with an LFENCE. | |
| */ | |
| if (cpu_feature_enabled(X86_FEATURE_RETPOLINE_LFENCE)) { | |
| bytes[i++] = 0x0f; | |
| bytes[i++] = 0xae; | |
| bytes[i++] = 0xe8; /* LFENCE */ | |
| } | |
| #ifdef CONFIG_MITIGATION_ITS | |
| /* | |
| * Check if the address of last byte of emitted-indirect is in | |
| * lower-half of the cacheline. Such branches need ITS mitigation. | |
| */ | |
| if (cpu_wants_indirect_its_thunk_at((unsigned long)addr + i, reg)) | |
| return emit_its_trampoline(addr, insn, reg, bytes); | |
| #endif | |
| ret = emit_indirect(op, reg, bytes + i, insn->length - i); | |
| if (ret < 0) | |
| return ret; | |
| i += ret; | |
| for (; i < insn->length;) | |
| bytes[i++] = BYTES_NOP1; | |
| return i; | |
| } | |
| /* | |
| * Generated by 'objtool --retpoline'. | |
| */ | |
| void __init_or_module noinline apply_retpolines(s32 *start, s32 *end) | |
| { | |
| s32 *s; | |
| for (s = start; s < end; s++) { | |
| void *addr = (void *)s + *s; | |
| struct insn insn; | |
| int len, ret; | |
| u8 bytes[16]; | |
| u8 op1, op2; | |
| u8 *dest; | |
| ret = insn_decode_kernel(&insn, addr); | |
| if (WARN_ON_ONCE(ret < 0)) | |
| continue; | |
| op1 = insn.opcode.bytes[0]; | |
| op2 = insn.opcode.bytes[1]; | |
| switch (op1) { | |
| case 0x70 ... 0x7f: /* Jcc.d8 */ | |
| /* See cfi_paranoid. */ | |
| WARN_ON_ONCE(cfi_mode != CFI_FINEIBT); | |
| continue; | |
| case CALL_INSN_OPCODE: | |
| case JMP32_INSN_OPCODE: | |
| /* Check for cfi_paranoid + ITS */ | |
| dest = addr + insn.length + insn.immediate.value; | |
| if (dest[-1] == 0xd6 && (dest[0] & 0xf0) == 0x70) { | |
| WARN_ON_ONCE(cfi_mode != CFI_FINEIBT); | |
| continue; | |
| } | |
| break; | |
| case 0x0f: /* escape */ | |
| if (op2 >= 0x80 && op2 <= 0x8f) | |
| break; | |
| fallthrough; | |
| default: | |
| WARN_ON_ONCE(1); | |
| continue; | |
| } | |
| DPRINTK(RETPOLINE, "retpoline at: %pS (%px) len: %d to: %pS", | |
| addr, addr, insn.length, | |
| addr + insn.length + insn.immediate.value); | |
| len = patch_retpoline(addr, &insn, bytes); | |
| if (len == insn.length) { | |
| optimize_nops(addr, bytes, len); | |
| DUMP_BYTES(RETPOLINE, ((u8*)addr), len, "%px: orig: ", addr); | |
| DUMP_BYTES(RETPOLINE, ((u8*)bytes), len, "%px: repl: ", addr); | |
| text_poke_early(addr, bytes, len); | |
| } | |
| } | |
| } | |
| #ifdef CONFIG_MITIGATION_RETHUNK | |
| bool cpu_wants_rethunk(void) | |
| { | |
| return cpu_feature_enabled(X86_FEATURE_RETHUNK); | |
| } | |
| bool cpu_wants_rethunk_at(void *addr) | |
| { | |
| if (!cpu_feature_enabled(X86_FEATURE_RETHUNK)) | |
| return false; | |
| if (x86_return_thunk != its_return_thunk) | |
| return true; | |
| return !((unsigned long)addr & 0x20); | |
| } | |
| /* | |
| * Rewrite the compiler generated return thunk tail-calls. | |
| * | |
| * For example, convert: | |
| * | |
| * JMP __x86_return_thunk | |
| * | |
| * into: | |
| * | |
| * RET | |
| */ | |
| static int patch_return(void *addr, struct insn *insn, u8 *bytes) | |
| { | |
| int i = 0; | |
| /* Patch the custom return thunks... */ | |
| if (cpu_wants_rethunk_at(addr)) { | |
| i = JMP32_INSN_SIZE; | |
| __text_gen_insn(bytes, JMP32_INSN_OPCODE, addr, x86_return_thunk, i); | |
| } else { | |
| /* ... or patch them out if not needed. */ | |
| bytes[i++] = RET_INSN_OPCODE; | |
| } | |
| for (; i < insn->length;) | |
| bytes[i++] = INT3_INSN_OPCODE; | |
| return i; | |
| } | |
| void __init_or_module noinline apply_returns(s32 *start, s32 *end) | |
| { | |
| s32 *s; | |
| if (cpu_wants_rethunk()) | |
| static_call_force_reinit(); | |
| for (s = start; s < end; s++) { | |
| void *dest = NULL, *addr = (void *)s + *s; | |
| struct insn insn; | |
| int len, ret; | |
| u8 bytes[16]; | |
| u8 op; | |
| ret = insn_decode_kernel(&insn, addr); | |
| if (WARN_ON_ONCE(ret < 0)) | |
| continue; | |
| op = insn.opcode.bytes[0]; | |
| if (op == JMP32_INSN_OPCODE) | |
| dest = addr + insn.length + insn.immediate.value; | |
| if (__static_call_fixup(addr, op, dest) || | |
| WARN_ONCE(dest != &__x86_return_thunk, | |
| "missing return thunk: %pS-%pS: %*ph", | |
| addr, dest, 5, addr)) | |
| continue; | |
| DPRINTK(RET, "return thunk at: %pS (%px) len: %d to: %pS", | |
| addr, addr, insn.length, | |
| addr + insn.length + insn.immediate.value); | |
| len = patch_return(addr, &insn, bytes); | |
| if (len == insn.length) { | |
| DUMP_BYTES(RET, ((u8*)addr), len, "%px: orig: ", addr); | |
| DUMP_BYTES(RET, ((u8*)bytes), len, "%px: repl: ", addr); | |
| text_poke_early(addr, bytes, len); | |
| } | |
| } | |
| } | |
| #else /* !CONFIG_MITIGATION_RETHUNK: */ | |
| void __init_or_module noinline apply_returns(s32 *start, s32 *end) { } | |
| #endif /* !CONFIG_MITIGATION_RETHUNK */ | |
| #else /* !CONFIG_MITIGATION_RETPOLINE || !CONFIG_OBJTOOL */ | |
| void __init_or_module noinline apply_retpolines(s32 *start, s32 *end) { } | |
| void __init_or_module noinline apply_returns(s32 *start, s32 *end) { } | |
| #endif /* !CONFIG_MITIGATION_RETPOLINE || !CONFIG_OBJTOOL */ | |
| #ifdef CONFIG_X86_KERNEL_IBT | |
| __noendbr bool is_endbr(u32 *val) | |
| { | |
| u32 endbr; | |
| __get_kernel_nofault(&endbr, val, u32, Efault); | |
| return __is_endbr(endbr); | |
| Efault: | |
| return false; | |
| } | |
| #ifdef CONFIG_FINEIBT | |
| static __noendbr bool exact_endbr(u32 *val) | |
| { | |
| u32 endbr; | |
| __get_kernel_nofault(&endbr, val, u32, Efault); | |
| return endbr == gen_endbr(); | |
| Efault: | |
| return false; | |
| } | |
| #endif | |
| static void poison_cfi(void *addr); | |
| static void __init_or_module poison_endbr(void *addr) | |
| { | |
| u32 poison = gen_endbr_poison(); | |
| if (WARN_ON_ONCE(!is_endbr(addr))) | |
| return; | |
| DPRINTK(ENDBR, "ENDBR at: %pS (%px)", addr, addr); | |
| /* | |
| * When we have IBT, the lack of ENDBR will trigger #CP | |
| */ | |
| DUMP_BYTES(ENDBR, ((u8*)addr), 4, "%px: orig: ", addr); | |
| DUMP_BYTES(ENDBR, ((u8*)&poison), 4, "%px: repl: ", addr); | |
| text_poke_early(addr, &poison, 4); | |
| } | |
| /* | |
| * Generated by: objtool --ibt | |
| * | |
| * Seal the functions for indirect calls by clobbering the ENDBR instructions | |
| * and the kCFI hash value. | |
| */ | |
| void __init_or_module noinline apply_seal_endbr(s32 *start, s32 *end) | |
| { | |
| s32 *s; | |
| for (s = start; s < end; s++) { | |
| void *addr = (void *)s + *s; | |
| poison_endbr(addr); | |
| if (IS_ENABLED(CONFIG_FINEIBT)) | |
| poison_cfi(addr - CFI_OFFSET); | |
| } | |
| } | |
| #else /* !CONFIG_X86_KERNEL_IBT: */ | |
| void __init_or_module apply_seal_endbr(s32 *start, s32 *end) { } | |
| #endif /* !CONFIG_X86_KERNEL_IBT */ | |
| #ifdef CONFIG_CFI_AUTO_DEFAULT | |
| # define __CFI_DEFAULT CFI_AUTO | |
| #elif defined(CONFIG_CFI) | |
| # define __CFI_DEFAULT CFI_KCFI | |
| #else | |
| # define __CFI_DEFAULT CFI_OFF | |
| #endif | |
| enum cfi_mode cfi_mode __ro_after_init = __CFI_DEFAULT; | |
| static bool cfi_debug __ro_after_init; | |
| #ifdef CONFIG_FINEIBT_BHI | |
| bool cfi_bhi __ro_after_init = false; | |
| #endif | |
| #ifdef CONFIG_FINEIBT | |
| /* | |
| * <fineibt_preamble_start>: | |
| * 0: f3 0f 1e fa endbr64 | |
| * 4: 2d 78 56 34 12 sub $0x12345678, %eax | |
| * 9: 2e 0f 85 03 00 00 00 jne,pn 13 <fineibt_preamble_start+0x13> | |
| * 10: 0f 1f 40 d6 nopl -0x2a(%rax) | |
| * | |
| * Note that the JNE target is the 0xD6 byte inside the NOPL, this decodes as | |
| * UDB on x86_64 and raises #UD. | |
| */ | |
| asm( ".pushsection .rodata \n" | |
| "fineibt_preamble_start: \n" | |
| " endbr64 \n" | |
| " subl $0x12345678, %eax \n" | |
| "fineibt_preamble_bhi: \n" | |
| " cs jne.d32 fineibt_preamble_start+0x13 \n" | |
| "#fineibt_func: \n" | |
| " nopl -42(%rax) \n" | |
| "fineibt_preamble_end: \n" | |
| ".popsection\n" | |
| ); | |
| extern u8 fineibt_preamble_start[]; | |
| extern u8 fineibt_preamble_bhi[]; | |
| extern u8 fineibt_preamble_end[]; | |
| #define fineibt_preamble_size (fineibt_preamble_end - fineibt_preamble_start) | |
| #define fineibt_preamble_bhi (fineibt_preamble_bhi - fineibt_preamble_start) | |
| #define fineibt_preamble_ud 0x13 | |
| #define fineibt_preamble_hash 5 | |
| #define fineibt_prefix_size (fineibt_preamble_size - ENDBR_INSN_SIZE) | |
| #endif /* CONFIG_FINEIBT */ | |
| #ifdef CONFIG_CFI | |
| u32 cfi_get_func_hash(void *func) | |
| { | |
| u32 hash; | |
| func -= cfi_get_offset(); | |
| switch (cfi_mode) { | |
| #ifdef CONFIG_FINEIBT | |
| case CFI_FINEIBT: | |
| func += fineibt_preamble_hash; | |
| break; | |
| #endif | |
| case CFI_KCFI: | |
| func += 1; | |
| break; | |
| default: | |
| return 0; | |
| } | |
| if (get_kernel_nofault(hash, func)) | |
| return 0; | |
| return hash; | |
| } | |
| int cfi_get_func_arity(void *func) | |
| { | |
| bhi_thunk *target; | |
| s32 disp; | |
| if (cfi_mode != CFI_FINEIBT && !cfi_bhi) | |
| return 0; | |
| if (get_kernel_nofault(disp, func - 4)) | |
| return 0; | |
| target = func + disp; | |
| return target - __bhi_args; | |
| } | |
| #endif | |
| #ifdef CONFIG_FINEIBT | |
| static bool cfi_rand __ro_after_init = true; | |
| static u32 cfi_seed __ro_after_init; | |
| /* | |
| * Re-hash the CFI hash with a boot-time seed while making sure the result is | |
| * not a valid ENDBR instruction. | |
| */ | |
| static u32 cfi_rehash(u32 hash) | |
| { | |
| hash ^= cfi_seed; | |
| while (unlikely(__is_endbr(hash) || __is_endbr(-hash))) { | |
| bool lsb = hash & 1; | |
| hash >>= 1; | |
| if (lsb) | |
| hash ^= 0x80200003; | |
| } | |
| return hash; | |
| } | |
| static __init int cfi_parse_cmdline(char *str) | |
| { | |
| if (!str) | |
| return -EINVAL; | |
| while (str) { | |
| char *next = strchr(str, ','); | |
| if (next) { | |
| *next = 0; | |
| next++; | |
| } | |
| if (!strcmp(str, "auto")) { | |
| cfi_mode = CFI_AUTO; | |
| } else if (!strcmp(str, "off")) { | |
| cfi_mode = CFI_OFF; | |
| cfi_rand = false; | |
| } else if (!strcmp(str, "debug")) { | |
| cfi_debug = true; | |
| } else if (!strcmp(str, "kcfi")) { | |
| cfi_mode = CFI_KCFI; | |
| } else if (!strcmp(str, "fineibt")) { | |
| cfi_mode = CFI_FINEIBT; | |
| } else if (!strcmp(str, "norand")) { | |
| cfi_rand = false; | |
| } else if (!strcmp(str, "warn")) { | |
| pr_alert("CFI: mismatch non-fatal!\n"); | |
| cfi_warn = true; | |
| } else if (!strcmp(str, "paranoid")) { | |
| if (cfi_mode == CFI_FINEIBT) { | |
| cfi_paranoid = true; | |
| } else { | |
| pr_err("CFI: ignoring paranoid; depends on fineibt.\n"); | |
| } | |
| } else if (!strcmp(str, "bhi")) { | |
| #ifdef CONFIG_FINEIBT_BHI | |
| if (cfi_mode == CFI_FINEIBT) { | |
| cfi_bhi = true; | |
| } else { | |
| pr_err("CFI: ignoring bhi; depends on fineibt.\n"); | |
| } | |
| #else | |
| pr_err("CFI: ignoring bhi; depends on FINEIBT_BHI=y.\n"); | |
| #endif | |
| } else { | |
| pr_err("CFI: Ignoring unknown option (%s).", str); | |
| } | |
| str = next; | |
| } | |
| return 0; | |
| } | |
| early_param("cfi", cfi_parse_cmdline); | |
| /* | |
| * kCFI FineIBT | |
| * | |
| * __cfi_\func: __cfi_\func: | |
| * movl $0x12345678,%eax // 5 endbr64 // 4 | |
| * nop subl $0x12345678,%eax // 5 | |
| * nop jne.d32,pn \func+3 // 7 | |
| * nop | |
| * nop | |
| * nop | |
| * nop | |
| * nop | |
| * nop | |
| * nop | |
| * nop | |
| * nop | |
| * \func: \func: | |
| * endbr64 nopl -42(%rax) | |
| * | |
| * | |
| * caller: caller: | |
| * movl $(-0x12345678),%r10d // 6 movl $0x12345678,%eax // 5 | |
| * addl $-15(%r11),%r10d // 4 lea -0x10(%r11),%r11 // 4 | |
| * je 1f // 2 nop5 // 5 | |
| * ud2 // 2 | |
| * 1: cs call __x86_indirect_thunk_r11 // 6 call *%r11; nop3; // 6 | |
| * | |
| * | |
| * Notably, the FineIBT sequences are crafted such that branches are presumed | |
| * non-taken. This is based on Agner Fog's optimization manual, which states: | |
| * | |
| * "Make conditional jumps most often not taken: The efficiency and throughput | |
| * for not-taken branches is better than for taken branches on most | |
| * processors. Therefore, it is good to place the most frequent branch first" | |
| * | |
| * NOTE: Update the kCFI caller sequence to make use of this observation: | |
| * | |
| * kCFI kCFI-OPT | |
| * | |
| * caller: caller: | |
| * movl $(-0x12345678),%r10d // 6 movl $(-0x12345678),%r10d // 6 | |
| * addl $-15(%r11),%r10d // 4 addl $-15(%r11),%r10d // 4 | |
| * je 1f // 2 jne . + 3 // 2 | |
| * ud2 // 2 test $0xd6, %al // 2 | |
| * 1: cs call __x86_indirect_thunk_r11 // 6 1: cs call __x86_indirect_thunk_r11 // 6 | |
| * | |
| * This new test clobbers eflags, but those are clobbered by the hash test | |
| * anyway. | |
| */ | |
| /* | |
| * <fineibt_caller_start>: | |
| * 0: b8 78 56 34 12 mov $0x12345678, %eax | |
| * 5: 4d 8d 5b f0 lea -0x10(%r11), %r11 | |
| * 9: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1) | |
| */ | |
| asm( ".pushsection .rodata \n" | |
| "fineibt_caller_start: \n" | |
| " movl $0x12345678, %eax \n" | |
| " lea -0x10(%r11), %r11 \n" | |
| ASM_NOP5 | |
| "fineibt_caller_end: \n" | |
| ".popsection \n" | |
| ); | |
| extern u8 fineibt_caller_start[]; | |
| extern u8 fineibt_caller_end[]; | |
| #define fineibt_caller_size (fineibt_caller_end - fineibt_caller_start) | |
| #define fineibt_caller_hash 1 | |
| #define fineibt_caller_jmp (fineibt_caller_size - 2) | |
| /* | |
| * Since FineIBT does hash validation on the callee side it is prone to | |
| * circumvention attacks where a 'naked' ENDBR instruction exists that | |
| * is not part of the fineibt_preamble sequence. | |
| * | |
| * Notably the x86 entry points must be ENDBR and equally cannot be | |
| * fineibt_preamble. | |
| * | |
| * The fineibt_paranoid caller sequence adds additional caller side | |
| * hash validation. This stops such circumvention attacks dead, but at the cost | |
| * of adding a load. | |
| * | |
| * <fineibt_paranoid_start>: | |
| * 0: b8 78 56 34 12 mov $0x12345678, %eax | |
| * 5: 41 3b 43 f5 cmp -0x11(%r11), %eax | |
| * 9: 2e 4d 8d 5b <f0> cs lea -0x10(%r11), %r11 | |
| * e: 75 fd jne d <fineibt_paranoid_start+0xd> | |
| * 10: 41 ff d3 call *%r11 | |
| * 13: 90 nop | |
| * | |
| * Notably LEA does not modify flags and can be reordered with the CMP, | |
| * avoiding a dependency. Again, using a non-taken (backwards) branch | |
| * for the failure case, abusing LEA's immediate 0xf0 as LOCK prefix for the | |
| * Jcc.d8, causing #UD. | |
| */ | |
| asm( ".pushsection .rodata \n" | |
| "fineibt_paranoid_start: \n" | |
| " mov $0x12345678, %eax \n" | |
| " cmpl -11(%r11), %eax \n" | |
| " .byte 0x2e \n" | |
| " lea -0x10(%r11), %r11 \n" | |
| "#fineibt_caller_size: \n" | |
| " jne fineibt_paranoid_start+0xd \n" | |
| "fineibt_paranoid_ind: \n" | |
| " cs call *%r11 \n" | |
| "fineibt_paranoid_end: \n" | |
| ".popsection \n" | |
| ); | |
| extern u8 fineibt_paranoid_start[]; | |
| extern u8 fineibt_paranoid_ind[]; | |
| extern u8 fineibt_paranoid_end[]; | |
| #define fineibt_paranoid_size (fineibt_paranoid_end - fineibt_paranoid_start) | |
| #define fineibt_paranoid_ind (fineibt_paranoid_ind - fineibt_paranoid_start) | |
| #define fineibt_paranoid_ud 0xd | |
| static u32 decode_preamble_hash(void *addr, int *reg) | |
| { | |
| u8 *p = addr; | |
| /* b8+reg 78 56 34 12 movl $0x12345678,\reg */ | |
| if (p[0] >= 0xb8 && p[0] < 0xc0) { | |
| if (reg) | |
| *reg = p[0] - 0xb8; | |
| return *(u32 *)(addr + 1); | |
| } | |
| return 0; /* invalid hash value */ | |
| } | |
| static u32 decode_caller_hash(void *addr) | |
| { | |
| u8 *p = addr; | |
| /* 41 ba 88 a9 cb ed mov $(-0x12345678),%r10d */ | |
| if (p[0] == 0x41 && p[1] == 0xba) | |
| return -*(u32 *)(addr + 2); | |
| /* e8 0c 88 a9 cb ed jmp.d8 +12 */ | |
| if (p[0] == JMP8_INSN_OPCODE && p[1] == fineibt_caller_jmp) | |
| return -*(u32 *)(addr + 2); | |
| return 0; /* invalid hash value */ | |
| } | |
| /* .retpoline_sites */ | |
| static int cfi_disable_callers(s32 *start, s32 *end) | |
| { | |
| /* | |
| * Disable kCFI by patching in a JMP.d8, this leaves the hash immediate | |
| * in tact for later usage. Also see decode_caller_hash() and | |
| * cfi_rewrite_callers(). | |
| */ | |
| const u8 jmp[] = { JMP8_INSN_OPCODE, fineibt_caller_jmp }; | |
| s32 *s; | |
| for (s = start; s < end; s++) { | |
| void *addr = (void *)s + *s; | |
| u32 hash; | |
| addr -= fineibt_caller_size; | |
| hash = decode_caller_hash(addr); | |
| if (!hash) /* nocfi callers */ | |
| continue; | |
| text_poke_early(addr, jmp, 2); | |
| } | |
| return 0; | |
| } | |
| static int cfi_enable_callers(s32 *start, s32 *end) | |
| { | |
| /* | |
| * Re-enable (and update) kCFI, undo what cfi_disable_callers() did. | |
| */ | |
| const u8 udne[] = { 0x75, 0x01, 0xa8, 0xd6 }; | |
| const u8 mov[] = { 0x41, 0xba }; | |
| s32 *s; | |
| for (s = start; s < end; s++) { | |
| void *addr = (void *)s + *s; | |
| u32 hash; | |
| addr -= fineibt_caller_size; | |
| hash = decode_caller_hash(addr); | |
| if (!hash) /* nocfi callers */ | |
| continue; | |
| /* | |
| * See the kCFI/FineIBT comment above -- update note. | |
| */ | |
| text_poke_early(addr + 10, udne, 4); | |
| text_poke_early(addr, mov, 2); | |
| } | |
| return 0; | |
| } | |
| /* .cfi_sites */ | |
| static int cfi_rand_preamble(s32 *start, s32 *end) | |
| { | |
| s32 *s; | |
| for (s = start; s < end; s++) { | |
| void *addr = (void *)s + *s; | |
| u32 hash; | |
| hash = decode_preamble_hash(addr, NULL); | |
| if (WARN(!hash, "no CFI hash found at: %pS %px %*ph\n", | |
| addr, addr, 5, addr)) | |
| return -EINVAL; | |
| hash = cfi_rehash(hash); | |
| text_poke_early(addr + 1, &hash, 4); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Inline the bhi-arity 1 case: | |
| * | |
| * __cfi_foo: | |
| * 0: f3 0f 1e fa endbr64 | |
| * 4: 2d 78 56 34 12 sub $0x12345678, %eax | |
| * 9: 49 0f 45 fa cmovne %rax, %rdi | |
| * d: 2e 75 03 jne,pn foo+0x3 | |
| * | |
| * foo: | |
| * 10: 0f 1f 40 <d6> nopl -42(%rax) | |
| * | |
| * Notably, this scheme is incompatible with permissive CFI | |
| * because the CMOVcc is unconditional and RDI will have been | |
| * clobbered. | |
| */ | |
| asm( ".pushsection .rodata \n" | |
| "fineibt_bhi1_start: \n" | |
| " cmovne %rax, %rdi \n" | |
| " cs jne fineibt_bhi1_func + 0x3 \n" | |
| "fineibt_bhi1_func: \n" | |
| " nopl -42(%rax) \n" | |
| "fineibt_bhi1_end: \n" | |
| ".popsection \n" | |
| ); | |
| extern u8 fineibt_bhi1_start[]; | |
| extern u8 fineibt_bhi1_end[]; | |
| #define fineibt_bhi1_size (fineibt_bhi1_end - fineibt_bhi1_start) | |
| static void cfi_fineibt_bhi_preamble(void *addr, int arity) | |
| { | |
| u8 bytes[MAX_INSN_SIZE]; | |
| if (!arity) | |
| return; | |
| if (!cfi_warn && arity == 1) { | |
| text_poke_early(addr + fineibt_preamble_bhi, | |
| fineibt_bhi1_start, fineibt_bhi1_size); | |
| return; | |
| } | |
| /* | |
| * Replace the bytes at fineibt_preamble_bhi with a CALL instruction | |
| * that lines up exactly with the end of the preamble, such that the | |
| * return address will be foo+0. | |
| * | |
| * __cfi_foo: | |
| * 0: f3 0f 1e fa endbr64 | |
| * 4: 2d 78 56 34 12 sub $0x12345678, %eax | |
| * 9: 2e 2e e8 DD DD DD DD cs cs call __bhi_args[arity] | |
| */ | |
| bytes[0] = 0x2e; | |
| bytes[1] = 0x2e; | |
| __text_gen_insn(bytes + 2, CALL_INSN_OPCODE, | |
| addr + fineibt_preamble_bhi + 2, | |
| __bhi_args[arity], CALL_INSN_SIZE); | |
| text_poke_early(addr + fineibt_preamble_bhi, bytes, 7); | |
| } | |
| static int cfi_rewrite_preamble(s32 *start, s32 *end) | |
| { | |
| s32 *s; | |
| for (s = start; s < end; s++) { | |
| void *addr = (void *)s + *s; | |
| int arity; | |
| u32 hash; | |
| /* | |
| * When the function doesn't start with ENDBR the compiler will | |
| * have determined there are no indirect calls to it and we | |
| * don't need no CFI either. | |
| */ | |
| if (!is_endbr(addr + CFI_OFFSET)) | |
| continue; | |
| hash = decode_preamble_hash(addr, &arity); | |
| if (WARN(!hash, "no CFI hash found at: %pS %px %*ph\n", | |
| addr, addr, 5, addr)) | |
| return -EINVAL; | |
| /* | |
| * FineIBT relies on being at func-16, so if the preamble is | |
| * actually larger than that, place it the tail end. | |
| * | |
| * NOTE: this is possible with things like DEBUG_CALL_THUNKS | |
| * and DEBUG_FORCE_FUNCTION_ALIGN_64B. | |
| */ | |
| addr += CFI_OFFSET - fineibt_prefix_size; | |
| text_poke_early(addr, fineibt_preamble_start, fineibt_preamble_size); | |
| WARN_ON(*(u32 *)(addr + fineibt_preamble_hash) != 0x12345678); | |
| text_poke_early(addr + fineibt_preamble_hash, &hash, 4); | |
| WARN_ONCE(!IS_ENABLED(CONFIG_FINEIBT_BHI) && arity, | |
| "kCFI preamble has wrong register at: %pS %*ph\n", | |
| addr, 5, addr); | |
| if (cfi_bhi) | |
| cfi_fineibt_bhi_preamble(addr, arity); | |
| } | |
| return 0; | |
| } | |
| static void cfi_rewrite_endbr(s32 *start, s32 *end) | |
| { | |
| s32 *s; | |
| for (s = start; s < end; s++) { | |
| void *addr = (void *)s + *s; | |
| if (!exact_endbr(addr + CFI_OFFSET)) | |
| continue; | |
| poison_endbr(addr + CFI_OFFSET); | |
| } | |
| } | |
| /* .retpoline_sites */ | |
| static int cfi_rand_callers(s32 *start, s32 *end) | |
| { | |
| s32 *s; | |
| for (s = start; s < end; s++) { | |
| void *addr = (void *)s + *s; | |
| u32 hash; | |
| addr -= fineibt_caller_size; | |
| hash = decode_caller_hash(addr); | |
| if (hash) { | |
| hash = -cfi_rehash(hash); | |
| text_poke_early(addr + 2, &hash, 4); | |
| } | |
| } | |
| return 0; | |
| } | |
| static int emit_paranoid_trampoline(void *addr, struct insn *insn, int reg, u8 *bytes) | |
| { | |
| u8 *thunk = (void *)__x86_indirect_its_thunk_array[reg] - 2; | |
| #ifdef CONFIG_MITIGATION_ITS | |
| u8 *tmp = its_allocate_thunk(reg); | |
| if (tmp) | |
| thunk = tmp; | |
| #endif | |
| return __emit_trampoline(addr, insn, bytes, thunk, thunk); | |
| } | |
| static int cfi_rewrite_callers(s32 *start, s32 *end) | |
| { | |
| s32 *s; | |
| for (s = start; s < end; s++) { | |
| void *addr = (void *)s + *s; | |
| struct insn insn; | |
| u8 bytes[20]; | |
| u32 hash; | |
| int ret; | |
| u8 op; | |
| addr -= fineibt_caller_size; | |
| hash = decode_caller_hash(addr); | |
| if (!hash) | |
| continue; | |
| if (!cfi_paranoid) { | |
| text_poke_early(addr, fineibt_caller_start, fineibt_caller_size); | |
| WARN_ON(*(u32 *)(addr + fineibt_caller_hash) != 0x12345678); | |
| text_poke_early(addr + fineibt_caller_hash, &hash, 4); | |
| /* rely on apply_retpolines() */ | |
| continue; | |
| } | |
| /* cfi_paranoid */ | |
| ret = insn_decode_kernel(&insn, addr + fineibt_caller_size); | |
| if (WARN_ON_ONCE(ret < 0)) | |
| continue; | |
| op = insn.opcode.bytes[0]; | |
| if (op != CALL_INSN_OPCODE && op != JMP32_INSN_OPCODE) { | |
| WARN_ON_ONCE(1); | |
| continue; | |
| } | |
| memcpy(bytes, fineibt_paranoid_start, fineibt_paranoid_size); | |
| memcpy(bytes + fineibt_caller_hash, &hash, 4); | |
| if (cpu_wants_indirect_its_thunk_at((unsigned long)addr + fineibt_paranoid_ind, 11)) { | |
| emit_paranoid_trampoline(addr + fineibt_caller_size, | |
| &insn, 11, bytes + fineibt_caller_size); | |
| } else { | |
| int len = fineibt_paranoid_size - fineibt_paranoid_ind; | |
| ret = emit_indirect(op, 11, bytes + fineibt_paranoid_ind, len); | |
| if (WARN_ON_ONCE(ret != len)) | |
| continue; | |
| } | |
| text_poke_early(addr, bytes, fineibt_paranoid_size); | |
| } | |
| return 0; | |
| } | |
| #define pr_cfi_debug(X...) if (cfi_debug) pr_info(X) | |
| #define FINEIBT_WARN(_f, _v) \ | |
| WARN_ONCE((_f) != (_v), "FineIBT: " #_f " %ld != %d\n", _f, _v) | |
| static void __init_or_module __apply_fineibt(s32 *start_retpoline, s32 *end_retpoline, | |
| s32 *start_cfi, s32 *end_cfi, bool builtin) | |
| { | |
| int ret; | |
| if (FINEIBT_WARN(fineibt_preamble_size, 20) || | |
| FINEIBT_WARN(fineibt_preamble_bhi + fineibt_bhi1_size, 20) || | |
| FINEIBT_WARN(fineibt_caller_size, 14) || | |
| FINEIBT_WARN(fineibt_paranoid_size, 20) || | |
| WARN_ON_ONCE(CFI_OFFSET < fineibt_prefix_size)) | |
| return; | |
| if (cfi_mode == CFI_AUTO) { | |
| cfi_mode = CFI_KCFI; | |
| if (HAS_KERNEL_IBT && cpu_feature_enabled(X86_FEATURE_IBT)) { | |
| /* | |
| * FRED has much saner context on exception entry and | |
| * is less easy to take advantage of. | |
| */ | |
| if (!cpu_feature_enabled(X86_FEATURE_FRED)) | |
| cfi_paranoid = true; | |
| cfi_mode = CFI_FINEIBT; | |
| } | |
| } | |
| /* | |
| * Rewrite the callers to not use the __cfi_ stubs, such that we might | |
| * rewrite them. This disables all CFI. If this succeeds but any of the | |
| * later stages fails, we're without CFI. | |
| */ | |
| pr_cfi_debug("CFI: disabling all indirect call checking\n"); | |
| ret = cfi_disable_callers(start_retpoline, end_retpoline); | |
| if (ret) | |
| goto err; | |
| if (cfi_rand) { | |
| if (builtin) { | |
| cfi_seed = get_random_u32(); | |
| cfi_bpf_hash = cfi_rehash(cfi_bpf_hash); | |
| cfi_bpf_subprog_hash = cfi_rehash(cfi_bpf_subprog_hash); | |
| } | |
| pr_cfi_debug("CFI: cfi_seed: 0x%08x\n", cfi_seed); | |
| pr_cfi_debug("CFI: rehashing all preambles\n"); | |
| ret = cfi_rand_preamble(start_cfi, end_cfi); | |
| if (ret) | |
| goto err; | |
| pr_cfi_debug("CFI: rehashing all indirect calls\n"); | |
| ret = cfi_rand_callers(start_retpoline, end_retpoline); | |
| if (ret) | |
| goto err; | |
| } else { | |
| pr_cfi_debug("CFI: rehashing disabled\n"); | |
| } | |
| switch (cfi_mode) { | |
| case CFI_OFF: | |
| if (builtin) | |
| pr_info("CFI: disabled\n"); | |
| return; | |
| case CFI_KCFI: | |
| pr_cfi_debug("CFI: re-enabling all indirect call checking\n"); | |
| ret = cfi_enable_callers(start_retpoline, end_retpoline); | |
| if (ret) | |
| goto err; | |
| if (builtin) | |
| pr_info("CFI: Using %sretpoline kCFI\n", | |
| cfi_rand ? "rehashed " : ""); | |
| return; | |
| case CFI_FINEIBT: | |
| pr_cfi_debug("CFI: adding FineIBT to all preambles\n"); | |
| /* place the FineIBT preamble at func()-16 */ | |
| ret = cfi_rewrite_preamble(start_cfi, end_cfi); | |
| if (ret) | |
| goto err; | |
| /* rewrite the callers to target func()-16 */ | |
| pr_cfi_debug("CFI: rewriting indirect call sites to use FineIBT\n"); | |
| ret = cfi_rewrite_callers(start_retpoline, end_retpoline); | |
| if (ret) | |
| goto err; | |
| /* now that nobody targets func()+0, remove ENDBR there */ | |
| pr_cfi_debug("CFI: removing old endbr insns\n"); | |
| cfi_rewrite_endbr(start_cfi, end_cfi); | |
| if (builtin) { | |
| pr_info("Using %sFineIBT%s CFI\n", | |
| cfi_paranoid ? "paranoid " : "", | |
| cfi_bhi ? "+BHI" : ""); | |
| } | |
| return; | |
| default: | |
| break; | |
| } | |
| err: | |
| pr_err("Something went horribly wrong trying to rewrite the CFI implementation.\n"); | |
| } | |
| static inline void poison_hash(void *addr) | |
| { | |
| *(u32 *)addr = 0; | |
| } | |
| static void poison_cfi(void *addr) | |
| { | |
| /* | |
| * Compilers manage to be inconsistent with ENDBR vs __cfi prefixes, | |
| * some (static) functions for which they can determine the address | |
| * is never taken do not get a __cfi prefix, but *DO* get an ENDBR. | |
| * | |
| * As such, these functions will get sealed, but we need to be careful | |
| * to not unconditionally scribble the previous function. | |
| */ | |
| switch (cfi_mode) { | |
| case CFI_FINEIBT: | |
| /* | |
| * FineIBT preamble is at func-16. | |
| */ | |
| addr += CFI_OFFSET - fineibt_prefix_size; | |
| /* | |
| * FineIBT prefix should start with an ENDBR. | |
| */ | |
| if (!is_endbr(addr)) | |
| break; | |
| /* | |
| * __cfi_\func: | |
| * nopl -42(%rax) | |
| * sub $0, %eax | |
| * jne \func+3 | |
| * \func: | |
| * nopl -42(%rax) | |
| */ | |
| poison_endbr(addr); | |
| poison_hash(addr + fineibt_preamble_hash); | |
| break; | |
| case CFI_KCFI: | |
| /* | |
| * kCFI prefix should start with a valid hash. | |
| */ | |
| if (!decode_preamble_hash(addr, NULL)) | |
| break; | |
| /* | |
| * __cfi_\func: | |
| * movl $0, %eax | |
| * .skip 11, 0x90 | |
| */ | |
| poison_hash(addr + 1); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| /* | |
| * When regs->ip points to a 0xD6 byte in the FineIBT preamble, | |
| * return true and fill out target and type. | |
| * | |
| * We check the preamble by checking for the ENDBR instruction relative to the | |
| * UDB instruction. | |
| */ | |
| static bool decode_fineibt_preamble(struct pt_regs *regs, unsigned long *target, u32 *type) | |
| { | |
| unsigned long addr = regs->ip - fineibt_preamble_ud; | |
| u32 hash; | |
| if (!exact_endbr((void *)addr)) | |
| return false; | |
| *target = addr + fineibt_prefix_size; | |
| __get_kernel_nofault(&hash, addr + fineibt_preamble_hash, u32, Efault); | |
| *type = (u32)regs->ax + hash; | |
| /* | |
| * Since regs->ip points to the middle of an instruction; it cannot | |
| * continue with the normal fixup. | |
| */ | |
| regs->ip = *target; | |
| return true; | |
| Efault: | |
| return false; | |
| } | |
| /* | |
| * regs->ip points to one of the UD2 in __bhi_args[]. | |
| */ | |
| static bool decode_fineibt_bhi(struct pt_regs *regs, unsigned long *target, u32 *type) | |
| { | |
| unsigned long addr; | |
| u32 hash; | |
| if (!cfi_bhi) | |
| return false; | |
| if (regs->ip < (unsigned long)__bhi_args || | |
| regs->ip >= (unsigned long)__bhi_args_end) | |
| return false; | |
| /* | |
| * Fetch the return address from the stack, this points to the | |
| * FineIBT preamble. Since the CALL instruction is in the 5 last | |
| * bytes of the preamble, the return address is in fact the target | |
| * address. | |
| */ | |
| __get_kernel_nofault(&addr, regs->sp, unsigned long, Efault); | |
| *target = addr; | |
| addr -= fineibt_prefix_size; | |
| if (!exact_endbr((void *)addr)) | |
| return false; | |
| __get_kernel_nofault(&hash, addr + fineibt_preamble_hash, u32, Efault); | |
| *type = (u32)regs->ax + hash; | |
| /* | |
| * The UD2 sites are constructed with a RET immediately following, | |
| * as such the non-fatal case can use the regular fixup. | |
| */ | |
| return true; | |
| Efault: | |
| return false; | |
| } | |
| static bool is_paranoid_thunk(unsigned long addr) | |
| { | |
| u32 thunk; | |
| __get_kernel_nofault(&thunk, (u32 *)addr, u32, Efault); | |
| return (thunk & 0x00FFFFFF) == 0xfd75d6; | |
| Efault: | |
| return false; | |
| } | |
| /* | |
| * regs->ip points to a LOCK Jcc.d8 instruction from the fineibt_paranoid_start[] | |
| * sequence, or to UDB + Jcc.d8 for cfi_paranoid + ITS thunk. | |
| */ | |
| static bool decode_fineibt_paranoid(struct pt_regs *regs, unsigned long *target, u32 *type) | |
| { | |
| unsigned long addr = regs->ip - fineibt_paranoid_ud; | |
| if (!cfi_paranoid) | |
| return false; | |
| if (is_cfi_trap(addr + fineibt_caller_size - LEN_UD2)) { | |
| *target = regs->r11 + fineibt_prefix_size; | |
| *type = regs->ax; | |
| /* | |
| * Since the trapping instruction is the exact, but LOCK prefixed, | |
| * Jcc.d8 that got us here, the normal fixup will work. | |
| */ | |
| return true; | |
| } | |
| /* | |
| * The cfi_paranoid + ITS thunk combination results in: | |
| * | |
| * 0: b8 78 56 34 12 mov $0x12345678, %eax | |
| * 5: 41 3b 43 f7 cmp -11(%r11), %eax | |
| * a: 2e 3d 8d 5b f0 cs lea -0x10(%r11), %r11 | |
| * e: 2e e8 XX XX XX XX cs call __x86_indirect_paranoid_thunk_r11 | |
| * | |
| * Where the paranoid_thunk looks like: | |
| * | |
| * 1d: <d6> udb | |
| * __x86_indirect_paranoid_thunk_r11: | |
| * 1e: 75 fd jne 1d | |
| * __x86_indirect_its_thunk_r11: | |
| * 20: 41 ff eb jmp *%r11 | |
| * 23: cc int3 | |
| * | |
| */ | |
| if (is_paranoid_thunk(regs->ip)) { | |
| *target = regs->r11 + fineibt_prefix_size; | |
| *type = regs->ax; | |
| regs->ip = *target; | |
| return true; | |
| } | |
| return false; | |
| } | |
| bool decode_fineibt_insn(struct pt_regs *regs, unsigned long *target, u32 *type) | |
| { | |
| if (decode_fineibt_paranoid(regs, target, type)) | |
| return true; | |
| if (decode_fineibt_bhi(regs, target, type)) | |
| return true; | |
| return decode_fineibt_preamble(regs, target, type); | |
| } | |
| #else /* !CONFIG_FINEIBT: */ | |
| static void __init_or_module __apply_fineibt(s32 *start_retpoline, s32 *end_retpoline, | |
| s32 *start_cfi, s32 *end_cfi, bool builtin) | |
| { | |
| if (IS_ENABLED(CONFIG_CFI) && builtin) | |
| pr_info("CFI: Using standard kCFI\n"); | |
| } | |
| #ifdef CONFIG_X86_KERNEL_IBT | |
| static void poison_cfi(void *addr) { } | |
| #endif | |
| #endif /* !CONFIG_FINEIBT */ | |
| void __init_or_module apply_fineibt(s32 *start_retpoline, s32 *end_retpoline, | |
| s32 *start_cfi, s32 *end_cfi) | |
| { | |
| return __apply_fineibt(start_retpoline, end_retpoline, | |
| start_cfi, end_cfi, | |
| /* .builtin = */ false); | |
| } | |
| /* | |
| * Self-test for the INT3 based CALL emulation code. | |
| * | |
| * This exercises int3_emulate_call() to make sure INT3 pt_regs are set up | |
| * properly and that there is a stack gap between the INT3 frame and the | |
| * previous context. Without this gap doing a virtual PUSH on the interrupted | |
| * stack would corrupt the INT3 IRET frame. | |
| * | |
| * See entry_{32,64}.S for more details. | |
| */ | |
| extern void int3_selftest_asm(unsigned int *ptr); | |
| asm ( | |
| " .pushsection .init.text, \"ax\", @progbits\n" | |
| " .type int3_selftest_asm, @function\n" | |
| "int3_selftest_asm:\n" | |
| ANNOTATE_NOENDBR "\n" | |
| /* | |
| * INT3 padded with NOP to CALL_INSN_SIZE. The INT3 triggers an | |
| * exception, then the int3_exception_nb notifier emulates a call to | |
| * int3_selftest_callee(). | |
| */ | |
| " int3; nop; nop; nop; nop\n" | |
| ASM_RET | |
| " .size int3_selftest_asm, . - int3_selftest_asm\n" | |
| " .popsection\n" | |
| ); | |
| extern void int3_selftest_callee(unsigned int *ptr); | |
| asm ( | |
| " .pushsection .init.text, \"ax\", @progbits\n" | |
| " .type int3_selftest_callee, @function\n" | |
| "int3_selftest_callee:\n" | |
| ANNOTATE_NOENDBR "\n" | |
| " movl $0x1234, (%" _ASM_ARG1 ")\n" | |
| ASM_RET | |
| " .size int3_selftest_callee, . - int3_selftest_callee\n" | |
| " .popsection\n" | |
| ); | |
| extern void int3_selftest_ip(void); /* defined in asm below */ | |
| static int __init | |
| int3_exception_notify(struct notifier_block *self, unsigned long val, void *data) | |
| { | |
| unsigned long selftest = (unsigned long)&int3_selftest_asm; | |
| struct die_args *args = data; | |
| struct pt_regs *regs = args->regs; | |
| unsigned long ip; | |
| OPTIMIZER_HIDE_VAR(selftest); | |
| if (!regs || user_mode(regs)) | |
| return NOTIFY_DONE; | |
| if (val != DIE_INT3) | |
| return NOTIFY_DONE; | |
| if (regs->ip - INT3_INSN_SIZE != selftest) | |
| return NOTIFY_DONE; | |
| ip = regs->ip - INT3_INSN_SIZE + CALL_INSN_SIZE; | |
| int3_emulate_call(regs, ip, (unsigned long)&int3_selftest_callee); | |
| return NOTIFY_STOP; | |
| } | |
| /* Must be noinline to ensure uniqueness of int3_selftest_ip. */ | |
| static noinline void __init int3_selftest(void) | |
| { | |
| static __initdata struct notifier_block int3_exception_nb = { | |
| .notifier_call = int3_exception_notify, | |
| .priority = INT_MAX-1, /* last */ | |
| }; | |
| unsigned int val = 0; | |
| BUG_ON(register_die_notifier(&int3_exception_nb)); | |
| /* | |
| * Basically: int3_selftest_callee(&val); but really complicated :-) | |
| */ | |
| int3_selftest_asm(&val); | |
| BUG_ON(val != 0x1234); | |
| unregister_die_notifier(&int3_exception_nb); | |
| } | |
| static __initdata int __alt_reloc_selftest_addr; | |
| extern void __init __alt_reloc_selftest(void *arg); | |
| __visible noinline void __init __alt_reloc_selftest(void *arg) | |
| { | |
| WARN_ON(arg != &__alt_reloc_selftest_addr); | |
| } | |
| static noinline void __init alt_reloc_selftest(void) | |
| { | |
| /* | |
| * Tests text_poke_apply_relocation(). | |
| * | |
| * This has a relative immediate (CALL) in a place other than the first | |
| * instruction and additionally on x86_64 we get a RIP-relative LEA: | |
| * | |
| * lea 0x0(%rip),%rdi # 5d0: R_X86_64_PC32 .init.data+0x5566c | |
| * call +0 # 5d5: R_X86_64_PLT32 __alt_reloc_selftest-0x4 | |
| * | |
| * Getting this wrong will either crash and burn or tickle the WARN | |
| * above. | |
| */ | |
| asm_inline volatile ( | |
| ALTERNATIVE("", "lea %[mem], %%" _ASM_ARG1 "; call __alt_reloc_selftest;", X86_FEATURE_ALWAYS) | |
| : ASM_CALL_CONSTRAINT | |
| : [mem] "m" (__alt_reloc_selftest_addr) | |
| : _ASM_ARG1 | |
| ); | |
| } | |
| void __init alternative_instructions(void) | |
| { | |
| u64 ibt; | |
| int3_selftest(); | |
| /* | |
| * The patching is not fully atomic, so try to avoid local | |
| * interruptions that might execute the to be patched code. | |
| * Other CPUs are not running. | |
| */ | |
| stop_nmi(); | |
| /* | |
| * Don't stop machine check exceptions while patching. | |
| * MCEs only happen when something got corrupted and in this | |
| * case we must do something about the corruption. | |
| * Ignoring it is worse than an unlikely patching race. | |
| * Also machine checks tend to be broadcast and if one CPU | |
| * goes into machine check the others follow quickly, so we don't | |
| * expect a machine check to cause undue problems during to code | |
| * patching. | |
| */ | |
| /* | |
| * Make sure to set (artificial) features depending on used paravirt | |
| * functions which can later influence alternative patching. | |
| */ | |
| paravirt_set_cap(); | |
| /* Keep CET-IBT disabled until caller/callee are patched */ | |
| ibt = ibt_save(/*disable*/ true); | |
| __apply_fineibt(__retpoline_sites, __retpoline_sites_end, | |
| __cfi_sites, __cfi_sites_end, true); | |
| cfi_debug = false; | |
| /* | |
| * Rewrite the retpolines, must be done before alternatives since | |
| * those can rewrite the retpoline thunks. | |
| */ | |
| apply_retpolines(__retpoline_sites, __retpoline_sites_end); | |
| apply_returns(__return_sites, __return_sites_end); | |
| its_fini_core(); | |
| /* | |
| * Adjust all CALL instructions to point to func()-10, including | |
| * those in .altinstr_replacement. | |
| */ | |
| callthunks_patch_builtin_calls(); | |
| apply_alternatives(__alt_instructions, __alt_instructions_end); | |
| /* | |
| * Seal all functions that do not have their address taken. | |
| */ | |
| apply_seal_endbr(__ibt_endbr_seal, __ibt_endbr_seal_end); | |
| ibt_restore(ibt); | |
| restart_nmi(); | |
| alternatives_patched = 1; | |
| alt_reloc_selftest(); | |
| } | |
| /** | |
| * text_poke_early - Update instructions on a live kernel at boot time | |
| * @addr: address to modify | |
| * @opcode: source of the copy | |
| * @len: length to copy | |
| * | |
| * When you use this code to patch more than one byte of an instruction | |
| * you need to make sure that other CPUs cannot execute this code in parallel. | |
| * Also no thread must be currently preempted in the middle of these | |
| * instructions. And on the local CPU you need to be protected against NMI or | |
| * MCE handlers seeing an inconsistent instruction while you patch. | |
| */ | |
| void __init_or_module text_poke_early(void *addr, const void *opcode, | |
| size_t len) | |
| { | |
| unsigned long flags; | |
| if (boot_cpu_has(X86_FEATURE_NX) && | |
| is_module_text_address((unsigned long)addr)) { | |
| /* | |
| * Modules text is marked initially as non-executable, so the | |
| * code cannot be running and speculative code-fetches are | |
| * prevented. Just change the code. | |
| */ | |
| memcpy(addr, opcode, len); | |
| } else { | |
| local_irq_save(flags); | |
| memcpy(addr, opcode, len); | |
| sync_core(); | |
| local_irq_restore(flags); | |
| /* | |
| * Could also do a CLFLUSH here to speed up CPU recovery; but | |
| * that causes hangs on some VIA CPUs. | |
| */ | |
| } | |
| } | |
| __ro_after_init struct mm_struct *text_poke_mm; | |
| __ro_after_init unsigned long text_poke_mm_addr; | |
| /* | |
| * Text poking creates and uses a mapping in the lower half of the | |
| * address space. Relax LASS enforcement when accessing the poking | |
| * address. | |
| * | |
| * objtool enforces a strict policy of "no function calls within AC=1 | |
| * regions". Adhere to the policy by using inline versions of | |
| * memcpy()/memset() that will never result in a function call. | |
| */ | |
| static void text_poke_memcpy(void *dst, const void *src, size_t len) | |
| { | |
| lass_stac(); | |
| __inline_memcpy(dst, src, len); | |
| lass_clac(); | |
| } | |
| static void text_poke_memset(void *dst, const void *src, size_t len) | |
| { | |
| int c = *(const int *)src; | |
| lass_stac(); | |
| __inline_memset(dst, c, len); | |
| lass_clac(); | |
| } | |
| typedef void text_poke_f(void *dst, const void *src, size_t len); | |
| static void __poke_vmalloc_pages(struct page **pages, void *addr, | |
| bool cross_page_boundary) | |
| { | |
| pages[0] = vmalloc_to_page(addr); | |
| if (cross_page_boundary) | |
| pages[1] = vmalloc_to_page(addr + PAGE_SIZE); | |
| } | |
| static void poke_vmalloc_pages(struct page **pages, void *addr, | |
| bool cross_page_boundary) | |
| { | |
| if (in_dbg_master()) { | |
| /* | |
| * If called from kgdb cannot sleep, but all other CPUs stopped | |
| * anyway so safe to proceed without locks | |
| */ | |
| __poke_vmalloc_pages(pages, addr, cross_page_boundary); | |
| } else { | |
| /* | |
| * execmem ROX ranges are shared between modules and can be | |
| * collapsed to huge PMD entries, and this collapse can happen | |
| * concurrently with a racing set_memory_rox(). | |
| * | |
| * Prevent vmalloc_to_page() from racing by acquiring an | |
| * init_mm read lock which pairs with the init_mm write lock in | |
| * cpa_collapse_large_pages(). | |
| */ | |
| guard(mmap_read_lock)(&init_mm); | |
| __poke_vmalloc_pages(pages, addr, cross_page_boundary); | |
| } | |
| } | |
| static void *__text_poke(text_poke_f func, void *addr, const void *src, size_t len) | |
| { | |
| bool cross_page_boundary = offset_in_page(addr) + len > PAGE_SIZE; | |
| struct page *pages[2] = {NULL}; | |
| struct mm_struct *prev_mm; | |
| unsigned long flags; | |
| pte_t pte, *ptep; | |
| spinlock_t *ptl; | |
| pgprot_t pgprot; | |
| /* | |
| * While boot memory allocator is running we cannot use struct pages as | |
| * they are not yet initialized. There is no way to recover. | |
| */ | |
| BUG_ON(!after_bootmem); | |
| if (!core_kernel_text((unsigned long)addr)) { | |
| poke_vmalloc_pages(pages, addr, cross_page_boundary); | |
| } else { | |
| pages[0] = virt_to_page(addr); | |
| WARN_ON(!PageReserved(pages[0])); | |
| if (cross_page_boundary) | |
| pages[1] = virt_to_page(addr + PAGE_SIZE); | |
| } | |
| /* | |
| * If something went wrong, crash and burn since recovery paths are not | |
| * implemented. | |
| */ | |
| BUG_ON(!pages[0] || (cross_page_boundary && !pages[1])); | |
| /* | |
| * Map the page without the global bit, as TLB flushing is done with | |
| * flush_tlb_mm_range(), which is intended for non-global PTEs. | |
| */ | |
| pgprot = __pgprot(pgprot_val(PAGE_KERNEL) & ~_PAGE_GLOBAL); | |
| /* | |
| * The lock is not really needed, but this allows to avoid open-coding. | |
| */ | |
| ptep = get_locked_pte(text_poke_mm, text_poke_mm_addr, &ptl); | |
| /* | |
| * This must not fail; preallocated in poking_init(). | |
| */ | |
| VM_BUG_ON(!ptep); | |
| local_irq_save(flags); | |
| pte = mk_pte(pages[0], pgprot); | |
| set_pte_at(text_poke_mm, text_poke_mm_addr, ptep, pte); | |
| if (cross_page_boundary) { | |
| pte = mk_pte(pages[1], pgprot); | |
| set_pte_at(text_poke_mm, text_poke_mm_addr + PAGE_SIZE, ptep + 1, pte); | |
| } | |
| /* | |
| * Loading the temporary mm behaves as a compiler barrier, which | |
| * guarantees that the PTE will be set at the time memcpy() is done. | |
| */ | |
| prev_mm = use_temporary_mm(text_poke_mm); | |
| kasan_disable_current(); | |
| func((u8 *)text_poke_mm_addr + offset_in_page(addr), src, len); | |
| kasan_enable_current(); | |
| /* | |
| * Ensure that the PTE is only cleared after the instructions of memcpy | |
| * were issued by using a compiler barrier. | |
| */ | |
| barrier(); | |
| pte_clear(text_poke_mm, text_poke_mm_addr, ptep); | |
| if (cross_page_boundary) | |
| pte_clear(text_poke_mm, text_poke_mm_addr + PAGE_SIZE, ptep + 1); | |
| /* | |
| * Loading the previous page-table hierarchy requires a serializing | |
| * instruction that already allows the core to see the updated version. | |
| * Xen-PV is assumed to serialize execution in a similar manner. | |
| */ | |
| unuse_temporary_mm(prev_mm); | |
| /* | |
| * Flushing the TLB might involve IPIs, which would require enabled | |
| * IRQs, but not if the mm is not used, as it is in this point. | |
| */ | |
| flush_tlb_mm_range(text_poke_mm, text_poke_mm_addr, text_poke_mm_addr + | |
| (cross_page_boundary ? 2 : 1) * PAGE_SIZE, | |
| PAGE_SHIFT, false); | |
| if (func == text_poke_memcpy) { | |
| /* | |
| * If the text does not match what we just wrote then something is | |
| * fundamentally screwy; there's nothing we can really do about that. | |
| */ | |
| BUG_ON(memcmp(addr, src, len)); | |
| } | |
| local_irq_restore(flags); | |
| pte_unmap_unlock(ptep, ptl); | |
| return addr; | |
| } | |
| /** | |
| * text_poke - Update instructions on a live kernel | |
| * @addr: address to modify | |
| * @opcode: source of the copy | |
| * @len: length to copy | |
| * | |
| * Only atomic text poke/set should be allowed when not doing early patching. | |
| * It means the size must be writable atomically and the address must be aligned | |
| * in a way that permits an atomic write. It also makes sure we fit on a single | |
| * page. | |
| * | |
| * Note that the caller must ensure that if the modified code is part of a | |
| * module, the module would not be removed during poking. This can be achieved | |
| * by registering a module notifier, and ordering module removal and patching | |
| * through a mutex. | |
| */ | |
| void *text_poke(void *addr, const void *opcode, size_t len) | |
| { | |
| lockdep_assert_held(&text_mutex); | |
| return __text_poke(text_poke_memcpy, addr, opcode, len); | |
| } | |
| /** | |
| * text_poke_kgdb - Update instructions on a live kernel by kgdb | |
| * @addr: address to modify | |
| * @opcode: source of the copy | |
| * @len: length to copy | |
| * | |
| * Only atomic text poke/set should be allowed when not doing early patching. | |
| * It means the size must be writable atomically and the address must be aligned | |
| * in a way that permits an atomic write. It also makes sure we fit on a single | |
| * page. | |
| * | |
| * Context: should only be used by kgdb, which ensures no other core is running, | |
| * despite the fact it does not hold the text_mutex. | |
| */ | |
| void *text_poke_kgdb(void *addr, const void *opcode, size_t len) | |
| { | |
| return __text_poke(text_poke_memcpy, addr, opcode, len); | |
| } | |
| void *text_poke_copy_locked(void *addr, const void *opcode, size_t len, | |
| bool core_ok) | |
| { | |
| unsigned long start = (unsigned long)addr; | |
| size_t patched = 0; | |
| if (WARN_ON_ONCE(!core_ok && core_kernel_text(start))) | |
| return NULL; | |
| while (patched < len) { | |
| unsigned long ptr = start + patched; | |
| size_t s; | |
| s = min_t(size_t, PAGE_SIZE * 2 - offset_in_page(ptr), len - patched); | |
| __text_poke(text_poke_memcpy, (void *)ptr, opcode + patched, s); | |
| patched += s; | |
| } | |
| return addr; | |
| } | |
| /** | |
| * text_poke_copy - Copy instructions into (an unused part of) RX memory | |
| * @addr: address to modify | |
| * @opcode: source of the copy | |
| * @len: length to copy, could be more than 2x PAGE_SIZE | |
| * | |
| * Not safe against concurrent execution; useful for JITs to dump | |
| * new code blocks into unused regions of RX memory. Can be used in | |
| * conjunction with synchronize_rcu_tasks() to wait for existing | |
| * execution to quiesce after having made sure no existing functions | |
| * pointers are live. | |
| */ | |
| void *text_poke_copy(void *addr, const void *opcode, size_t len) | |
| { | |
| mutex_lock(&text_mutex); | |
| addr = text_poke_copy_locked(addr, opcode, len, false); | |
| mutex_unlock(&text_mutex); | |
| return addr; | |
| } | |
| /** | |
| * text_poke_set - memset into (an unused part of) RX memory | |
| * @addr: address to modify | |
| * @c: the byte to fill the area with | |
| * @len: length to copy, could be more than 2x PAGE_SIZE | |
| * | |
| * This is useful to overwrite unused regions of RX memory with illegal | |
| * instructions. | |
| */ | |
| void *text_poke_set(void *addr, int c, size_t len) | |
| { | |
| unsigned long start = (unsigned long)addr; | |
| size_t patched = 0; | |
| if (WARN_ON_ONCE(core_kernel_text(start))) | |
| return NULL; | |
| mutex_lock(&text_mutex); | |
| while (patched < len) { | |
| unsigned long ptr = start + patched; | |
| size_t s; | |
| s = min_t(size_t, PAGE_SIZE * 2 - offset_in_page(ptr), len - patched); | |
| __text_poke(text_poke_memset, (void *)ptr, (void *)&c, s); | |
| patched += s; | |
| } | |
| mutex_unlock(&text_mutex); | |
| return addr; | |
| } | |
| static void do_sync_core(void *info) | |
| { | |
| sync_core(); | |
| } | |
| void smp_text_poke_sync_each_cpu(void) | |
| { | |
| on_each_cpu(do_sync_core, NULL, 1); | |
| } | |
| /* | |
| * NOTE: crazy scheme to allow patching Jcc.d32 but not increase the size of | |
| * this thing. When len == 6 everything is prefixed with 0x0f and we map | |
| * opcode to Jcc.d8, using len to distinguish. | |
| */ | |
| struct smp_text_poke_loc { | |
| /* addr := _stext + rel_addr */ | |
| s32 rel_addr; | |
| s32 disp; | |
| u8 len; | |
| u8 opcode; | |
| const u8 text[TEXT_POKE_MAX_OPCODE_SIZE]; | |
| /* see smp_text_poke_batch_finish() */ | |
| u8 old; | |
| }; | |
| #define TEXT_POKE_ARRAY_MAX (PAGE_SIZE / sizeof(struct smp_text_poke_loc)) | |
| static struct smp_text_poke_array { | |
| struct smp_text_poke_loc vec[TEXT_POKE_ARRAY_MAX]; | |
| int nr_entries; | |
| } text_poke_array; | |
| static DEFINE_PER_CPU(atomic_t, text_poke_array_refs); | |
| /* | |
| * These four __always_inline annotations imply noinstr, necessary | |
| * due to smp_text_poke_int3_handler() being noinstr: | |
| */ | |
| static __always_inline bool try_get_text_poke_array(void) | |
| { | |
| atomic_t *refs = this_cpu_ptr(&text_poke_array_refs); | |
| if (!raw_atomic_inc_not_zero(refs)) | |
| return false; | |
| return true; | |
| } | |
| static __always_inline void put_text_poke_array(void) | |
| { | |
| atomic_t *refs = this_cpu_ptr(&text_poke_array_refs); | |
| smp_mb__before_atomic(); | |
| raw_atomic_dec(refs); | |
| } | |
| static __always_inline void *text_poke_addr(const struct smp_text_poke_loc *tpl) | |
| { | |
| return _stext + tpl->rel_addr; | |
| } | |
| static __always_inline int patch_cmp(const void *tpl_a, const void *tpl_b) | |
| { | |
| if (tpl_a < text_poke_addr(tpl_b)) | |
| return -1; | |
| if (tpl_a > text_poke_addr(tpl_b)) | |
| return 1; | |
| return 0; | |
| } | |
| noinstr int smp_text_poke_int3_handler(struct pt_regs *regs) | |
| { | |
| struct smp_text_poke_loc *tpl; | |
| int ret = 0; | |
| void *ip; | |
| if (user_mode(regs)) | |
| return 0; | |
| /* | |
| * Having observed our INT3 instruction, we now must observe | |
| * text_poke_array with non-zero refcount: | |
| * | |
| * text_poke_array_refs = 1 INT3 | |
| * WMB RMB | |
| * write INT3 if (text_poke_array_refs != 0) | |
| */ | |
| smp_rmb(); | |
| if (!try_get_text_poke_array()) | |
| return 0; | |
| /* | |
| * Discount the INT3. See smp_text_poke_batch_finish(). | |
| */ | |
| ip = (void *) regs->ip - INT3_INSN_SIZE; | |
| /* | |
| * Skip the binary search if there is a single member in the vector. | |
| */ | |
| if (unlikely(text_poke_array.nr_entries > 1)) { | |
| tpl = __inline_bsearch(ip, text_poke_array.vec, text_poke_array.nr_entries, | |
| sizeof(struct smp_text_poke_loc), | |
| patch_cmp); | |
| if (!tpl) | |
| goto out_put; | |
| } else { | |
| tpl = text_poke_array.vec; | |
| if (text_poke_addr(tpl) != ip) | |
| goto out_put; | |
| } | |
| ip += tpl->len; | |
| switch (tpl->opcode) { | |
| case INT3_INSN_OPCODE: | |
| /* | |
| * Someone poked an explicit INT3, they'll want to handle it, | |
| * do not consume. | |
| */ | |
| goto out_put; | |
| case RET_INSN_OPCODE: | |
| int3_emulate_ret(regs); | |
| break; | |
| case CALL_INSN_OPCODE: | |
| int3_emulate_call(regs, (long)ip, (long)ip + tpl->disp); | |
| break; | |
| case JMP32_INSN_OPCODE: | |
| case JMP8_INSN_OPCODE: | |
| int3_emulate_jmp(regs, (long)ip + tpl->disp); | |
| break; | |
| case 0x70 ... 0x7f: /* Jcc */ | |
| int3_emulate_jcc(regs, tpl->opcode & 0xf, (long)ip, tpl->disp); | |
| break; | |
| default: | |
| BUG(); | |
| } | |
| ret = 1; | |
| out_put: | |
| put_text_poke_array(); | |
| return ret; | |
| } | |
| /** | |
| * smp_text_poke_batch_finish() -- update instructions on live kernel on SMP | |
| * | |
| * Input state: | |
| * text_poke_array.vec: vector of instructions to patch | |
| * text_poke_array.nr_entries: number of entries in the vector | |
| * | |
| * Modify multi-byte instructions by using INT3 breakpoints on SMP. | |
| * We completely avoid using stop_machine() here, and achieve the | |
| * synchronization using INT3 breakpoints and SMP cross-calls. | |
| * | |
| * The way it is done: | |
| * - For each entry in the vector: | |
| * - add an INT3 trap to the address that will be patched | |
| * - SMP sync all CPUs | |
| * - For each entry in the vector: | |
| * - update all but the first byte of the patched range | |
| * - SMP sync all CPUs | |
| * - For each entry in the vector: | |
| * - replace the first byte (INT3) by the first byte of the | |
| * replacing opcode | |
| * - SMP sync all CPUs | |
| */ | |
| void smp_text_poke_batch_finish(void) | |
| { | |
| unsigned char int3 = INT3_INSN_OPCODE; | |
| unsigned int i; | |
| int do_sync; | |
| if (!text_poke_array.nr_entries) | |
| return; | |
| lockdep_assert_held(&text_mutex); | |
| /* | |
| * Corresponds to the implicit memory barrier in try_get_text_poke_array() to | |
| * ensure reading a non-zero refcount provides up to date text_poke_array data. | |
| */ | |
| for_each_possible_cpu(i) | |
| atomic_set_release(per_cpu_ptr(&text_poke_array_refs, i), 1); | |
| /* | |
| * Function tracing can enable thousands of places that need to be | |
| * updated. This can take quite some time, and with full kernel debugging | |
| * enabled, this could cause the softlockup watchdog to trigger. | |
| * This function gets called every 256 entries added to be patched. | |
| * Call cond_resched() here to make sure that other tasks can get scheduled | |
| * while processing all the functions being patched. | |
| */ | |
| cond_resched(); | |
| /* | |
| * Corresponding read barrier in INT3 notifier for making sure the | |
| * text_poke_array.nr_entries and handler are correctly ordered wrt. patching. | |
| */ | |
| smp_wmb(); | |
| /* | |
| * First step: add a INT3 trap to the address that will be patched. | |
| */ | |
| for (i = 0; i < text_poke_array.nr_entries; i++) { | |
| text_poke_array.vec[i].old = *(u8 *)text_poke_addr(&text_poke_array.vec[i]); | |
| text_poke(text_poke_addr(&text_poke_array.vec[i]), &int3, INT3_INSN_SIZE); | |
| } | |
| smp_text_poke_sync_each_cpu(); | |
| /* | |
| * Second step: update all but the first byte of the patched range. | |
| */ | |
| for (do_sync = 0, i = 0; i < text_poke_array.nr_entries; i++) { | |
| u8 old[TEXT_POKE_MAX_OPCODE_SIZE+1] = { text_poke_array.vec[i].old, }; | |
| u8 _new[TEXT_POKE_MAX_OPCODE_SIZE+1]; | |
| const u8 *new = text_poke_array.vec[i].text; | |
| int len = text_poke_array.vec[i].len; | |
| if (len - INT3_INSN_SIZE > 0) { | |
| memcpy(old + INT3_INSN_SIZE, | |
| text_poke_addr(&text_poke_array.vec[i]) + INT3_INSN_SIZE, | |
| len - INT3_INSN_SIZE); | |
| if (len == 6) { | |
| _new[0] = 0x0f; | |
| memcpy(_new + 1, new, 5); | |
| new = _new; | |
| } | |
| text_poke(text_poke_addr(&text_poke_array.vec[i]) + INT3_INSN_SIZE, | |
| new + INT3_INSN_SIZE, | |
| len - INT3_INSN_SIZE); | |
| do_sync++; | |
| } | |
| /* | |
| * Emit a perf event to record the text poke, primarily to | |
| * support Intel PT decoding which must walk the executable code | |
| * to reconstruct the trace. The flow up to here is: | |
| * - write INT3 byte | |
| * - IPI-SYNC | |
| * - write instruction tail | |
| * At this point the actual control flow will be through the | |
| * INT3 and handler and not hit the old or new instruction. | |
| * Intel PT outputs FUP/TIP packets for the INT3, so the flow | |
| * can still be decoded. Subsequently: | |
| * - emit RECORD_TEXT_POKE with the new instruction | |
| * - IPI-SYNC | |
| * - write first byte | |
| * - IPI-SYNC | |
| * So before the text poke event timestamp, the decoder will see | |
| * either the old instruction flow or FUP/TIP of INT3. After the | |
| * text poke event timestamp, the decoder will see either the | |
| * new instruction flow or FUP/TIP of INT3. Thus decoders can | |
| * use the timestamp as the point at which to modify the | |
| * executable code. | |
| * The old instruction is recorded so that the event can be | |
| * processed forwards or backwards. | |
| */ | |
| perf_event_text_poke(text_poke_addr(&text_poke_array.vec[i]), old, len, new, len); | |
| } | |
| if (do_sync) { | |
| /* | |
| * According to Intel, this core syncing is very likely | |
| * not necessary and we'd be safe even without it. But | |
| * better safe than sorry (plus there's not only Intel). | |
| */ | |
| smp_text_poke_sync_each_cpu(); | |
| } | |
| /* | |
| * Third step: replace the first byte (INT3) by the first byte of the | |
| * replacing opcode. | |
| */ | |
| for (do_sync = 0, i = 0; i < text_poke_array.nr_entries; i++) { | |
| u8 byte = text_poke_array.vec[i].text[0]; | |
| if (text_poke_array.vec[i].len == 6) | |
| byte = 0x0f; | |
| if (byte == INT3_INSN_OPCODE) | |
| continue; | |
| text_poke(text_poke_addr(&text_poke_array.vec[i]), &byte, INT3_INSN_SIZE); | |
| do_sync++; | |
| } | |
| if (do_sync) | |
| smp_text_poke_sync_each_cpu(); | |
| /* | |
| * Remove and wait for refs to be zero. | |
| * | |
| * Notably, if after step-3 above the INT3 got removed, then the | |
| * smp_text_poke_sync_each_cpu() will have serialized against any running INT3 | |
| * handlers and the below spin-wait will not happen. | |
| * | |
| * IOW. unless the replacement instruction is INT3, this case goes | |
| * unused. | |
| */ | |
| for_each_possible_cpu(i) { | |
| atomic_t *refs = per_cpu_ptr(&text_poke_array_refs, i); | |
| if (unlikely(!atomic_dec_and_test(refs))) | |
| atomic_cond_read_acquire(refs, !VAL); | |
| } | |
| /* They are all completed: */ | |
| text_poke_array.nr_entries = 0; | |
| } | |
| static void __smp_text_poke_batch_add(void *addr, const void *opcode, size_t len, const void *emulate) | |
| { | |
| struct smp_text_poke_loc *tpl; | |
| struct insn insn; | |
| int ret, i = 0; | |
| tpl = &text_poke_array.vec[text_poke_array.nr_entries++]; | |
| if (len == 6) | |
| i = 1; | |
| memcpy((void *)tpl->text, opcode+i, len-i); | |
| if (!emulate) | |
| emulate = opcode; | |
| ret = insn_decode_kernel(&insn, emulate); | |
| BUG_ON(ret < 0); | |
| tpl->rel_addr = addr - (void *)_stext; | |
| tpl->len = len; | |
| tpl->opcode = insn.opcode.bytes[0]; | |
| if (is_jcc32(&insn)) { | |
| /* | |
| * Map Jcc.d32 onto Jcc.d8 and use len to distinguish. | |
| */ | |
| tpl->opcode = insn.opcode.bytes[1] - 0x10; | |
| } | |
| switch (tpl->opcode) { | |
| case RET_INSN_OPCODE: | |
| case JMP32_INSN_OPCODE: | |
| case JMP8_INSN_OPCODE: | |
| /* | |
| * Control flow instructions without implied execution of the | |
| * next instruction can be padded with INT3. | |
| */ | |
| for (i = insn.length; i < len; i++) | |
| BUG_ON(tpl->text[i] != INT3_INSN_OPCODE); | |
| break; | |
| default: | |
| BUG_ON(len != insn.length); | |
| } | |
| switch (tpl->opcode) { | |
| case INT3_INSN_OPCODE: | |
| case RET_INSN_OPCODE: | |
| break; | |
| case CALL_INSN_OPCODE: | |
| case JMP32_INSN_OPCODE: | |
| case JMP8_INSN_OPCODE: | |
| case 0x70 ... 0x7f: /* Jcc */ | |
| tpl->disp = insn.immediate.value; | |
| break; | |
| default: /* assume NOP */ | |
| switch (len) { | |
| case 2: /* NOP2 -- emulate as JMP8+0 */ | |
| BUG_ON(memcmp(emulate, x86_nops[len], len)); | |
| tpl->opcode = JMP8_INSN_OPCODE; | |
| tpl->disp = 0; | |
| break; | |
| case 5: /* NOP5 -- emulate as JMP32+0 */ | |
| BUG_ON(memcmp(emulate, x86_nops[len], len)); | |
| tpl->opcode = JMP32_INSN_OPCODE; | |
| tpl->disp = 0; | |
| break; | |
| default: /* unknown instruction */ | |
| BUG(); | |
| } | |
| break; | |
| } | |
| } | |
| /* | |
| * We hard rely on the text_poke_array.vec being ordered; ensure this is so by flushing | |
| * early if needed. | |
| */ | |
| static bool text_poke_addr_ordered(void *addr) | |
| { | |
| WARN_ON_ONCE(!addr); | |
| if (!text_poke_array.nr_entries) | |
| return true; | |
| /* | |
| * If the last current entry's address is higher than the | |
| * new entry's address we'd like to add, then ordering | |
| * is violated and we must first flush all pending patching | |
| * requests: | |
| */ | |
| if (text_poke_addr(text_poke_array.vec + text_poke_array.nr_entries-1) > addr) | |
| return false; | |
| return true; | |
| } | |
| /** | |
| * smp_text_poke_batch_add() -- update instruction on live kernel on SMP, batched | |
| * @addr: address to patch | |
| * @opcode: opcode of new instruction | |
| * @len: length to copy | |
| * @emulate: instruction to be emulated | |
| * | |
| * Add a new instruction to the current queue of to-be-patched instructions | |
| * the kernel maintains. The patching request will not be executed immediately, | |
| * but becomes part of an array of patching requests, optimized for batched | |
| * execution. All pending patching requests will be executed on the next | |
| * smp_text_poke_batch_finish() call. | |
| */ | |
| void __ref smp_text_poke_batch_add(void *addr, const void *opcode, size_t len, const void *emulate) | |
| { | |
| if (text_poke_array.nr_entries == TEXT_POKE_ARRAY_MAX || !text_poke_addr_ordered(addr)) | |
| smp_text_poke_batch_finish(); | |
| __smp_text_poke_batch_add(addr, opcode, len, emulate); | |
| } | |
| /** | |
| * smp_text_poke_single() -- update instruction on live kernel on SMP immediately | |
| * @addr: address to patch | |
| * @opcode: opcode of new instruction | |
| * @len: length to copy | |
| * @emulate: instruction to be emulated | |
| * | |
| * Update a single instruction with the vector in the stack, avoiding | |
| * dynamically allocated memory. This function should be used when it is | |
| * not possible to allocate memory for a vector. The single instruction | |
| * is patched in immediately. | |
| */ | |
| void __ref smp_text_poke_single(void *addr, const void *opcode, size_t len, const void *emulate) | |
| { | |
| smp_text_poke_batch_add(addr, opcode, len, emulate); | |
| smp_text_poke_batch_finish(); | |
| } |