| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * sleep.c - x86-specific ACPI sleep support. | |
| * | |
| * Copyright (C) 2001-2003 Patrick Mochel | |
| * Copyright (C) 2001-2003 Pavel Machek <pavel@ucw.cz> | |
| */ | |
| #include <linux/acpi.h> | |
| #include <linux/memblock.h> | |
| #include <linux/dmi.h> | |
| #include <linux/cpumask.h> | |
| #include <linux/pgtable.h> | |
| #include <asm/segment.h> | |
| #include <asm/desc.h> | |
| #include <asm/cacheflush.h> | |
| #include <asm/realmode.h> | |
| #include <asm/hypervisor.h> | |
| #include <asm/msr.h> | |
| #include <asm/smp.h> | |
| #include <linux/ftrace.h> | |
| #include "../../realmode/rm/wakeup.h" | |
| #include "sleep.h" | |
| unsigned long acpi_realmode_flags; | |
| #if defined(CONFIG_SMP) && defined(CONFIG_64BIT) | |
| static char temp_stack[4096]; | |
| #endif | |
| /** | |
| * acpi_get_wakeup_address - provide physical address for S3 wakeup | |
| * | |
| * Returns the physical address where the kernel should be resumed after the | |
| * system awakes from S3, e.g. for programming into the firmware waking vector. | |
| */ | |
| unsigned long acpi_get_wakeup_address(void) | |
| { | |
| return ((unsigned long)(real_mode_header->wakeup_start)); | |
| } | |
| /** | |
| * x86_acpi_enter_sleep_state - enter sleep state | |
| * @state: Sleep state to enter. | |
| * | |
| * Wrapper around acpi_enter_sleep_state() to be called by assembly. | |
| */ | |
| asmlinkage acpi_status __visible x86_acpi_enter_sleep_state(u8 state) | |
| { | |
| return acpi_enter_sleep_state(state); | |
| } | |
| /** | |
| * x86_acpi_suspend_lowlevel - save kernel state | |
| * | |
| * Create an identity mapped page table and copy the wakeup routine to | |
| * low memory. | |
| */ | |
| int x86_acpi_suspend_lowlevel(void) | |
| { | |
| struct wakeup_header *header = | |
| (struct wakeup_header *) __va(real_mode_header->wakeup_header); | |
| struct msr val; | |
| if (header->signature != WAKEUP_HEADER_SIGNATURE) { | |
| printk(KERN_ERR "wakeup header does not match\n"); | |
| return -EINVAL; | |
| } | |
| header->video_mode = saved_video_mode; | |
| header->pmode_behavior = 0; | |
| #ifndef CONFIG_64BIT | |
| native_store_gdt((struct desc_ptr *)&header->pmode_gdt); | |
| /* | |
| * We have to check that we can write back the value, and not | |
| * just read it. At least on 90 nm Pentium M (Family 6, Model | |
| * 13), reading an invalid MSR is not guaranteed to trap, see | |
| * Erratum X4 in "Intel Pentium M Processor on 90 nm Process | |
| * with 2-MB L2 Cache and IntelĀ® Processor A100 and A110 on 90 | |
| * nm process with 512-KB L2 Cache Specification Update". | |
| */ | |
| if (!rdmsrq_safe(MSR_EFER, &val.q) && !wrmsrq_safe(MSR_EFER, val.q)) | |
| header->pmode_behavior |= (1 << WAKEUP_BEHAVIOR_RESTORE_EFER); | |
| header->pmode_efer_low = val.l; | |
| header->pmode_efer_high = val.h; | |
| #endif /* !CONFIG_64BIT */ | |
| header->pmode_cr0 = read_cr0(); | |
| if (__this_cpu_read(cpu_info.cpuid_level) >= 0) { | |
| header->pmode_cr4 = __read_cr4(); | |
| header->pmode_behavior |= (1 << WAKEUP_BEHAVIOR_RESTORE_CR4); | |
| } | |
| if (!rdmsrq_safe(MSR_IA32_MISC_ENABLE, &val.q) && | |
| !wrmsrq_safe(MSR_IA32_MISC_ENABLE, val.q)) | |
| header->pmode_behavior |= | |
| (1 << WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE); | |
| header->pmode_misc_en_low = val.l; | |
| header->pmode_misc_en_high = val.h; | |
| header->realmode_flags = acpi_realmode_flags; | |
| header->real_magic = 0x12345678; | |
| #ifndef CONFIG_64BIT | |
| header->pmode_entry = (u32)&wakeup_pmode_return; | |
| header->pmode_cr3 = (u32)__pa_symbol(initial_page_table); | |
| saved_magic = 0x12345678; | |
| #else /* CONFIG_64BIT */ | |
| #ifdef CONFIG_SMP | |
| /* | |
| * As each CPU starts up, it will find its own stack pointer | |
| * from its current_task->thread.sp. Typically that will be | |
| * the idle thread for a newly-started AP, or even the boot | |
| * CPU which will find it set to &init_task in the static | |
| * per-cpu data. | |
| * | |
| * Make the resuming CPU use the temporary stack at startup | |
| * by setting current->thread.sp to point to that. The true | |
| * %rsp will be restored with the rest of the CPU context, | |
| * by do_suspend_lowlevel(). And unwinders don't care about | |
| * the abuse of ->thread.sp because it's a dead variable | |
| * while the thread is running on the CPU anyway; the true | |
| * value is in the actual %rsp register. | |
| */ | |
| current->thread.sp = (unsigned long)temp_stack + sizeof(temp_stack); | |
| /* | |
| * Ensure the CPU knows which one it is when it comes back, if | |
| * it isn't in parallel mode and expected to work that out for | |
| * itself. | |
| */ | |
| if (!(smpboot_control & STARTUP_PARALLEL_MASK)) | |
| smpboot_control = smp_processor_id(); | |
| #endif | |
| initial_code = (unsigned long)wakeup_long64; | |
| saved_magic = 0x123456789abcdef0L; | |
| #endif /* CONFIG_64BIT */ | |
| /* | |
| * Pause/unpause graph tracing around do_suspend_lowlevel as it has | |
| * inconsistent call/return info after it jumps to the wakeup vector. | |
| */ | |
| pause_graph_tracing(); | |
| do_suspend_lowlevel(); | |
| unpause_graph_tracing(); | |
| return 0; | |
| } | |
| static int __init acpi_sleep_setup(char *str) | |
| { | |
| while ((str != NULL) && (*str != '\0')) { | |
| if (strncmp(str, "s3_bios", 7) == 0) | |
| acpi_realmode_flags |= 1; | |
| if (strncmp(str, "s3_mode", 7) == 0) | |
| acpi_realmode_flags |= 2; | |
| if (strncmp(str, "s3_beep", 7) == 0) | |
| acpi_realmode_flags |= 4; | |
| #ifdef CONFIG_HIBERNATION | |
| if (strncmp(str, "s4_hwsig", 8) == 0) | |
| acpi_check_s4_hw_signature = 1; | |
| if (strncmp(str, "s4_nohwsig", 10) == 0) | |
| acpi_check_s4_hw_signature = 0; | |
| #endif | |
| if (strncmp(str, "nonvs", 5) == 0) | |
| acpi_nvs_nosave(); | |
| if (strncmp(str, "nonvs_s3", 8) == 0) | |
| acpi_nvs_nosave_s3(); | |
| if (strncmp(str, "old_ordering", 12) == 0) | |
| acpi_old_suspend_ordering(); | |
| if (strncmp(str, "nobl", 4) == 0) | |
| acpi_sleep_no_blacklist(); | |
| str = strchr(str, ','); | |
| if (str != NULL) | |
| str += strspn(str, ", \t"); | |
| } | |
| return 1; | |
| } | |
| __setup("acpi_sleep=", acpi_sleep_setup); | |
| #if defined(CONFIG_HIBERNATION) && defined(CONFIG_HYPERVISOR_GUEST) | |
| static int __init init_s4_sigcheck(void) | |
| { | |
| /* | |
| * If running on a hypervisor, honour the ACPI specification | |
| * by default and trigger a clean reboot when the hardware | |
| * signature in FACS is changed after hibernation. | |
| */ | |
| if (acpi_check_s4_hw_signature == -1 && | |
| !hypervisor_is_type(X86_HYPER_NATIVE)) | |
| acpi_check_s4_hw_signature = 1; | |
| return 0; | |
| } | |
| /* This must happen before acpi_init() which is a subsys initcall */ | |
| arch_initcall(init_s4_sigcheck); | |
| #endif |