| /* SPDX-License-Identifier: GPL-2.0 */ | |
| /* | |
| * Copyright(c) 2016-20 Intel Corporation. | |
| * | |
| * Intel Software Guard Extensions (SGX) support. | |
| */ | |
| #ifndef _ASM_X86_SGX_H | |
| #define _ASM_X86_SGX_H | |
| #include <linux/bits.h> | |
| #include <linux/types.h> | |
| /* | |
| * This file contains both data structures defined by SGX architecture and Linux | |
| * defined software data structures and functions. The two should not be mixed | |
| * together for better readability. The architectural definitions come first. | |
| */ | |
| /* The SGX specific CPUID function. */ | |
| #define SGX_CPUID 0x12 | |
| /* EPC enumeration. */ | |
| #define SGX_CPUID_EPC 2 | |
| /* An invalid EPC section, i.e. the end marker. */ | |
| #define SGX_CPUID_EPC_INVALID 0x0 | |
| /* A valid EPC section. */ | |
| #define SGX_CPUID_EPC_SECTION 0x1 | |
| /* The bitmask for the EPC section type. */ | |
| #define SGX_CPUID_EPC_MASK GENMASK(3, 0) | |
| enum sgx_encls_function { | |
| ECREATE = 0x00, | |
| EADD = 0x01, | |
| EINIT = 0x02, | |
| EREMOVE = 0x03, | |
| EDGBRD = 0x04, | |
| EDGBWR = 0x05, | |
| EEXTEND = 0x06, | |
| ELDU = 0x08, | |
| EBLOCK = 0x09, | |
| EPA = 0x0A, | |
| EWB = 0x0B, | |
| ETRACK = 0x0C, | |
| EAUG = 0x0D, | |
| EMODPR = 0x0E, | |
| EMODT = 0x0F, | |
| EUPDATESVN = 0x18, | |
| }; | |
| /** | |
| * SGX_ENCLS_FAULT_FLAG - flag signifying an ENCLS return code is a trapnr | |
| * | |
| * ENCLS has its own (positive value) error codes and also generates | |
| * ENCLS specific #GP and #PF faults. And the ENCLS values get munged | |
| * with system error codes as everything percolates back up the stack. | |
| * Unfortunately (for us), we need to precisely identify each unique | |
| * error code, e.g. the action taken if EWB fails varies based on the | |
| * type of fault and on the exact SGX error code, i.e. we can't simply | |
| * convert all faults to -EFAULT. | |
| * | |
| * To make all three error types coexist, we set bit 30 to identify an | |
| * ENCLS fault. Bit 31 (technically bits N:31) is used to differentiate | |
| * between positive (faults and SGX error codes) and negative (system | |
| * error codes) values. | |
| */ | |
| #define SGX_ENCLS_FAULT_FLAG 0x40000000 | |
| /** | |
| * enum sgx_return_code - The return code type for ENCLS, ENCLU and ENCLV | |
| * @SGX_EPC_PAGE_CONFLICT: Page is being written by other ENCLS function. | |
| * @SGX_NOT_TRACKED: Previous ETRACK's shootdown sequence has not | |
| * been completed yet. | |
| * @SGX_CHILD_PRESENT: SECS has child pages present in the EPC. | |
| * @SGX_INVALID_EINITTOKEN: EINITTOKEN is invalid and enclave signer's | |
| * public key does not match IA32_SGXLEPUBKEYHASH. | |
| * @SGX_PAGE_NOT_MODIFIABLE: The EPC page cannot be modified because it | |
| * is in the PENDING or MODIFIED state. | |
| * @SGX_INSUFFICIENT_ENTROPY: Insufficient entropy in RNG. | |
| * @SGX_NO_UPDATE: EUPDATESVN could not update the CPUSVN because the | |
| * current SVN was not newer than CPUSVN. This is the most | |
| * common error code returned by EUPDATESVN. | |
| * @SGX_UNMASKED_EVENT: An unmasked event, e.g. INTR, was received | |
| */ | |
| enum sgx_return_code { | |
| SGX_EPC_PAGE_CONFLICT = 7, | |
| SGX_NOT_TRACKED = 11, | |
| SGX_CHILD_PRESENT = 13, | |
| SGX_INVALID_EINITTOKEN = 16, | |
| SGX_PAGE_NOT_MODIFIABLE = 20, | |
| SGX_INSUFFICIENT_ENTROPY = 29, | |
| SGX_NO_UPDATE = 31, | |
| SGX_UNMASKED_EVENT = 128, | |
| }; | |
| /* The modulus size for 3072-bit RSA keys. */ | |
| #define SGX_MODULUS_SIZE 384 | |
| /** | |
| * enum sgx_miscselect - additional information to an SSA frame | |
| * @SGX_MISC_EXINFO: Report #PF or #GP to the SSA frame. | |
| * | |
| * Save State Area (SSA) is a stack inside the enclave used to store processor | |
| * state when an exception or interrupt occurs. This enum defines additional | |
| * information stored to an SSA frame. | |
| */ | |
| enum sgx_miscselect { | |
| SGX_MISC_EXINFO = BIT(0), | |
| }; | |
| #define SGX_MISC_RESERVED_MASK GENMASK_ULL(63, 1) | |
| #define SGX_SSA_GPRS_SIZE 184 | |
| #define SGX_SSA_MISC_EXINFO_SIZE 16 | |
| /** | |
| * enum sgx_attribute - the attributes field in &struct sgx_secs | |
| * @SGX_ATTR_INIT: Enclave can be entered (is initialized). | |
| * @SGX_ATTR_DEBUG: Allow ENCLS(EDBGRD) and ENCLS(EDBGWR). | |
| * @SGX_ATTR_MODE64BIT: Tell that this a 64-bit enclave. | |
| * @SGX_ATTR_PROVISIONKEY: Allow to use provisioning keys for remote | |
| * attestation. | |
| * @SGX_ATTR_KSS: Allow to use key separation and sharing (KSS). | |
| * @SGX_ATTR_EINITTOKENKEY: Allow to use token signing key that is used to | |
| * sign cryptographic tokens that can be passed to | |
| * EINIT as an authorization to run an enclave. | |
| * @SGX_ATTR_ASYNC_EXIT_NOTIFY: Allow enclaves to be notified after an | |
| * asynchronous exit has occurred. | |
| */ | |
| enum sgx_attribute { | |
| SGX_ATTR_INIT = BIT(0), | |
| SGX_ATTR_DEBUG = BIT(1), | |
| SGX_ATTR_MODE64BIT = BIT(2), | |
| /* BIT(3) is reserved */ | |
| SGX_ATTR_PROVISIONKEY = BIT(4), | |
| SGX_ATTR_EINITTOKENKEY = BIT(5), | |
| /* BIT(6) is for CET */ | |
| SGX_ATTR_KSS = BIT(7), | |
| /* BIT(8) is reserved */ | |
| /* BIT(9) is reserved */ | |
| SGX_ATTR_ASYNC_EXIT_NOTIFY = BIT(10), | |
| }; | |
| #define SGX_ATTR_RESERVED_MASK (BIT_ULL(3) | \ | |
| BIT_ULL(6) | \ | |
| BIT_ULL(8) | \ | |
| BIT_ULL(9) | \ | |
| GENMASK_ULL(63, 11)) | |
| #define SGX_ATTR_UNPRIV_MASK (SGX_ATTR_DEBUG | \ | |
| SGX_ATTR_MODE64BIT | \ | |
| SGX_ATTR_KSS | \ | |
| SGX_ATTR_ASYNC_EXIT_NOTIFY) | |
| #define SGX_ATTR_PRIV_MASK (SGX_ATTR_PROVISIONKEY | \ | |
| SGX_ATTR_EINITTOKENKEY) | |
| /** | |
| * struct sgx_secs - SGX Enclave Control Structure (SECS) | |
| * @size: size of the address space | |
| * @base: base address of the address space | |
| * @ssa_frame_size: size of an SSA frame | |
| * @miscselect: additional information stored to an SSA frame | |
| * @attributes: attributes for enclave | |
| * @xfrm: XSave-Feature Request Mask (subset of XCR0) | |
| * @mrenclave: SHA256-hash of the enclave contents | |
| * @mrsigner: SHA256-hash of the public key used to sign the SIGSTRUCT | |
| * @config_id: a user-defined value that is used in key derivation | |
| * @isv_prod_id: a user-defined value that is used in key derivation | |
| * @isv_svn: a user-defined value that is used in key derivation | |
| * @config_svn: a user-defined value that is used in key derivation | |
| * | |
| * SGX Enclave Control Structure (SECS) is a special enclave page that is not | |
| * visible in the address space. In fact, this structure defines the address | |
| * range and other global attributes for the enclave and it is the first EPC | |
| * page created for any enclave. It is moved from a temporary buffer to an EPC | |
| * by the means of ENCLS[ECREATE] function. | |
| */ | |
| struct sgx_secs { | |
| u64 size; | |
| u64 base; | |
| u32 ssa_frame_size; | |
| u32 miscselect; | |
| u8 reserved1[24]; | |
| u64 attributes; | |
| u64 xfrm; | |
| u32 mrenclave[8]; | |
| u8 reserved2[32]; | |
| u32 mrsigner[8]; | |
| u8 reserved3[32]; | |
| u32 config_id[16]; | |
| u16 isv_prod_id; | |
| u16 isv_svn; | |
| u16 config_svn; | |
| u8 reserved4[3834]; | |
| } __packed; | |
| /** | |
| * enum sgx_tcs_flags - execution flags for TCS | |
| * @SGX_TCS_DBGOPTIN: If enabled allows single-stepping and breakpoints | |
| * inside an enclave. It is cleared by EADD but can | |
| * be set later with EDBGWR. | |
| */ | |
| enum sgx_tcs_flags { | |
| SGX_TCS_DBGOPTIN = 0x01, | |
| }; | |
| #define SGX_TCS_RESERVED_MASK GENMASK_ULL(63, 1) | |
| #define SGX_TCS_RESERVED_SIZE 4024 | |
| /** | |
| * struct sgx_tcs - Thread Control Structure (TCS) | |
| * @state: used to mark an entered TCS | |
| * @flags: execution flags (cleared by EADD) | |
| * @ssa_offset: SSA stack offset relative to the enclave base | |
| * @ssa_index: the current SSA frame index (cleard by EADD) | |
| * @nr_ssa_frames: the number of frame in the SSA stack | |
| * @entry_offset: entry point offset relative to the enclave base | |
| * @exit_addr: address outside the enclave to exit on an exception or | |
| * interrupt | |
| * @fs_offset: offset relative to the enclave base to become FS | |
| * segment inside the enclave | |
| * @gs_offset: offset relative to the enclave base to become GS | |
| * segment inside the enclave | |
| * @fs_limit: size to become a new FS-limit (only 32-bit enclaves) | |
| * @gs_limit: size to become a new GS-limit (only 32-bit enclaves) | |
| * | |
| * Thread Control Structure (TCS) is an enclave page visible in its address | |
| * space that defines an entry point inside the enclave. A thread enters inside | |
| * an enclave by supplying address of TCS to ENCLU(EENTER). A TCS can be entered | |
| * by only one thread at a time. | |
| */ | |
| struct sgx_tcs { | |
| u64 state; | |
| u64 flags; | |
| u64 ssa_offset; | |
| u32 ssa_index; | |
| u32 nr_ssa_frames; | |
| u64 entry_offset; | |
| u64 exit_addr; | |
| u64 fs_offset; | |
| u64 gs_offset; | |
| u32 fs_limit; | |
| u32 gs_limit; | |
| u8 reserved[SGX_TCS_RESERVED_SIZE]; | |
| } __packed; | |
| /** | |
| * struct sgx_pageinfo - an enclave page descriptor | |
| * @addr: address of the enclave page | |
| * @contents: pointer to the page contents | |
| * @metadata: pointer either to a SECINFO or PCMD instance | |
| * @secs: address of the SECS page | |
| */ | |
| struct sgx_pageinfo { | |
| u64 addr; | |
| u64 contents; | |
| u64 metadata; | |
| u64 secs; | |
| } __packed __aligned(32); | |
| /** | |
| * enum sgx_page_type - bits in the SECINFO flags defining the page type | |
| * @SGX_PAGE_TYPE_SECS: a SECS page | |
| * @SGX_PAGE_TYPE_TCS: a TCS page | |
| * @SGX_PAGE_TYPE_REG: a regular page | |
| * @SGX_PAGE_TYPE_VA: a VA page | |
| * @SGX_PAGE_TYPE_TRIM: a page in trimmed state | |
| * | |
| * Make sure when making changes to this enum that its values can still fit | |
| * in the bitfield within &struct sgx_encl_page | |
| */ | |
| enum sgx_page_type { | |
| SGX_PAGE_TYPE_SECS, | |
| SGX_PAGE_TYPE_TCS, | |
| SGX_PAGE_TYPE_REG, | |
| SGX_PAGE_TYPE_VA, | |
| SGX_PAGE_TYPE_TRIM, | |
| }; | |
| #define SGX_NR_PAGE_TYPES 5 | |
| #define SGX_PAGE_TYPE_MASK GENMASK(7, 0) | |
| /** | |
| * enum sgx_secinfo_flags - the flags field in &struct sgx_secinfo | |
| * @SGX_SECINFO_R: allow read | |
| * @SGX_SECINFO_W: allow write | |
| * @SGX_SECINFO_X: allow execution | |
| * @SGX_SECINFO_SECS: a SECS page | |
| * @SGX_SECINFO_TCS: a TCS page | |
| * @SGX_SECINFO_REG: a regular page | |
| * @SGX_SECINFO_VA: a VA page | |
| * @SGX_SECINFO_TRIM: a page in trimmed state | |
| */ | |
| enum sgx_secinfo_flags { | |
| SGX_SECINFO_R = BIT(0), | |
| SGX_SECINFO_W = BIT(1), | |
| SGX_SECINFO_X = BIT(2), | |
| SGX_SECINFO_SECS = (SGX_PAGE_TYPE_SECS << 8), | |
| SGX_SECINFO_TCS = (SGX_PAGE_TYPE_TCS << 8), | |
| SGX_SECINFO_REG = (SGX_PAGE_TYPE_REG << 8), | |
| SGX_SECINFO_VA = (SGX_PAGE_TYPE_VA << 8), | |
| SGX_SECINFO_TRIM = (SGX_PAGE_TYPE_TRIM << 8), | |
| }; | |
| #define SGX_SECINFO_PERMISSION_MASK GENMASK_ULL(2, 0) | |
| #define SGX_SECINFO_PAGE_TYPE_MASK (SGX_PAGE_TYPE_MASK << 8) | |
| #define SGX_SECINFO_RESERVED_MASK ~(SGX_SECINFO_PERMISSION_MASK | \ | |
| SGX_SECINFO_PAGE_TYPE_MASK) | |
| /** | |
| * struct sgx_secinfo - describes attributes of an EPC page | |
| * @flags: permissions and type | |
| * | |
| * Used together with ENCLS leaves that add or modify an EPC page to an | |
| * enclave to define page permissions and type. | |
| */ | |
| struct sgx_secinfo { | |
| u64 flags; | |
| u8 reserved[56]; | |
| } __packed __aligned(64); | |
| #define SGX_PCMD_RESERVED_SIZE 40 | |
| /** | |
| * struct sgx_pcmd - Paging Crypto Metadata (PCMD) | |
| * @enclave_id: enclave identifier | |
| * @mac: MAC over PCMD, page contents and isvsvn | |
| * | |
| * PCMD is stored for every swapped page to the regular memory. When ELDU loads | |
| * the page back it recalculates the MAC by using a isvsvn number stored in a | |
| * VA page. Together these two structures bring integrity and rollback | |
| * protection. | |
| */ | |
| struct sgx_pcmd { | |
| struct sgx_secinfo secinfo; | |
| u64 enclave_id; | |
| u8 reserved[SGX_PCMD_RESERVED_SIZE]; | |
| u8 mac[16]; | |
| } __packed __aligned(128); | |
| #define SGX_SIGSTRUCT_RESERVED1_SIZE 84 | |
| #define SGX_SIGSTRUCT_RESERVED2_SIZE 20 | |
| #define SGX_SIGSTRUCT_RESERVED3_SIZE 32 | |
| #define SGX_SIGSTRUCT_RESERVED4_SIZE 12 | |
| /** | |
| * struct sgx_sigstruct_header - defines author of the enclave | |
| * @header1: constant byte string | |
| * @vendor: must be either 0x0000 or 0x8086 | |
| * @date: YYYYMMDD in BCD | |
| * @header2: constant byte string | |
| * @swdefined: software defined value | |
| */ | |
| struct sgx_sigstruct_header { | |
| u64 header1[2]; | |
| u32 vendor; | |
| u32 date; | |
| u64 header2[2]; | |
| u32 swdefined; | |
| u8 reserved1[84]; | |
| } __packed; | |
| /** | |
| * struct sgx_sigstruct_body - defines contents of the enclave | |
| * @miscselect: additional information stored to an SSA frame | |
| * @misc_mask: required miscselect in SECS | |
| * @attributes: attributes for enclave | |
| * @xfrm: XSave-Feature Request Mask (subset of XCR0) | |
| * @attributes_mask: required attributes in SECS | |
| * @xfrm_mask: required XFRM in SECS | |
| * @mrenclave: SHA256-hash of the enclave contents | |
| * @isvprodid: a user-defined value that is used in key derivation | |
| * @isvsvn: a user-defined value that is used in key derivation | |
| */ | |
| struct sgx_sigstruct_body { | |
| u32 miscselect; | |
| u32 misc_mask; | |
| u8 reserved2[20]; | |
| u64 attributes; | |
| u64 xfrm; | |
| u64 attributes_mask; | |
| u64 xfrm_mask; | |
| u8 mrenclave[32]; | |
| u8 reserved3[32]; | |
| u16 isvprodid; | |
| u16 isvsvn; | |
| } __packed; | |
| /** | |
| * struct sgx_sigstruct - an enclave signature | |
| * @header: defines author of the enclave | |
| * @modulus: the modulus of the public key | |
| * @exponent: the exponent of the public key | |
| * @signature: the signature calculated over the fields except modulus, | |
| * @body: defines contents of the enclave | |
| * @q1: a value used in RSA signature verification | |
| * @q2: a value used in RSA signature verification | |
| * | |
| * Header and body are the parts that are actual signed. The remaining fields | |
| * define the signature of the enclave. | |
| */ | |
| struct sgx_sigstruct { | |
| struct sgx_sigstruct_header header; | |
| u8 modulus[SGX_MODULUS_SIZE]; | |
| u32 exponent; | |
| u8 signature[SGX_MODULUS_SIZE]; | |
| struct sgx_sigstruct_body body; | |
| u8 reserved4[12]; | |
| u8 q1[SGX_MODULUS_SIZE]; | |
| u8 q2[SGX_MODULUS_SIZE]; | |
| } __packed; | |
| #define SGX_LAUNCH_TOKEN_SIZE 304 | |
| /* | |
| * Do not put any hardware-defined SGX structure representations below this | |
| * comment! | |
| */ | |
| #ifdef CONFIG_X86_SGX_KVM | |
| int sgx_virt_ecreate(struct sgx_pageinfo *pageinfo, void __user *secs, | |
| int *trapnr); | |
| int sgx_virt_einit(void __user *sigstruct, void __user *token, | |
| void __user *secs, u64 *lepubkeyhash, int *trapnr); | |
| #endif | |
| int sgx_set_attribute(unsigned long *allowed_attributes, | |
| unsigned int attribute_fd); | |
| #endif /* _ASM_X86_SGX_H */ |