| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Performance event support for the System z CPU-measurement Sampling Facility | |
| * | |
| * Copyright IBM Corp. 2013, 2018 | |
| * Author(s): Hendrik Brueckner <brueckner@linux.vnet.ibm.com> | |
| */ | |
| #define pr_fmt(fmt) "cpum_sf: " fmt | |
| #include <linux/kernel.h> | |
| #include <linux/kernel_stat.h> | |
| #include <linux/perf_event.h> | |
| #include <linux/percpu.h> | |
| #include <linux/pid.h> | |
| #include <linux/notifier.h> | |
| #include <linux/slab.h> | |
| #include <linux/mm.h> | |
| #include <linux/moduleparam.h> | |
| #include <asm/cpu_mf.h> | |
| #include <asm/irq.h> | |
| #include <asm/debug.h> | |
| #include <asm/timex.h> | |
| #include <linux/io.h> | |
| /* Perf PMU definitions for the sampling facility */ | |
| #define PERF_CPUM_SF_MAX_CTR 2 | |
| #define PERF_EVENT_CPUM_SF 0xB0000UL /* Event: Basic-sampling */ | |
| #define PERF_EVENT_CPUM_SF_DIAG 0xBD000UL /* Event: Combined-sampling */ | |
| #define PERF_CPUM_SF_BASIC_MODE 0x0001 /* Basic-sampling flag */ | |
| #define PERF_CPUM_SF_DIAG_MODE 0x0002 /* Diagnostic-sampling flag */ | |
| #define PERF_CPUM_SF_FREQ_MODE 0x0008 /* Sampling with frequency */ | |
| #define OVERFLOW_REG(hwc) ((hwc)->extra_reg.config) | |
| #define SFB_ALLOC_REG(hwc) ((hwc)->extra_reg.alloc) | |
| #define TEAR_REG(hwc) ((hwc)->last_tag) | |
| #define SAMPL_RATE(hwc) ((hwc)->event_base) | |
| #define SAMPL_FLAGS(hwc) ((hwc)->config_base) | |
| #define SAMPL_DIAG_MODE(hwc) (SAMPL_FLAGS(hwc) & PERF_CPUM_SF_DIAG_MODE) | |
| #define SAMPL_FREQ_MODE(hwc) (SAMPL_FLAGS(hwc) & PERF_CPUM_SF_FREQ_MODE) | |
| /* Minimum number of sample-data-block-tables: | |
| * At least one table is required for the sampling buffer structure. | |
| * A single table contains up to 511 pointers to sample-data-blocks. | |
| */ | |
| #define CPUM_SF_MIN_SDBT 1 | |
| /* Number of sample-data-blocks per sample-data-block-table (SDBT): | |
| * A table contains SDB pointers (8 bytes) and one table-link entry | |
| * that points to the origin of the next SDBT. | |
| */ | |
| #define CPUM_SF_SDB_PER_TABLE ((PAGE_SIZE - 8) / 8) | |
| /* Maximum page offset for an SDBT table-link entry: | |
| * If this page offset is reached, a table-link entry to the next SDBT | |
| * must be added. | |
| */ | |
| #define CPUM_SF_SDBT_TL_OFFSET (CPUM_SF_SDB_PER_TABLE * 8) | |
| static inline int require_table_link(const void *sdbt) | |
| { | |
| return ((unsigned long)sdbt & ~PAGE_MASK) == CPUM_SF_SDBT_TL_OFFSET; | |
| } | |
| /* Minimum and maximum sampling buffer sizes: | |
| * | |
| * This number represents the maximum size of the sampling buffer taking | |
| * the number of sample-data-block-tables into account. Note that these | |
| * numbers apply to the basic-sampling function only. | |
| * The maximum number of SDBs is increased by CPUM_SF_SDB_DIAG_FACTOR if | |
| * the diagnostic-sampling function is active. | |
| * | |
| * Sampling buffer size Buffer characteristics | |
| * --------------------------------------------------- | |
| * 64KB == 16 pages (4KB per page) | |
| * 1 page for SDB-tables | |
| * 15 pages for SDBs | |
| * | |
| * 32MB == 8192 pages (4KB per page) | |
| * 16 pages for SDB-tables | |
| * 8176 pages for SDBs | |
| */ | |
| static unsigned long __read_mostly CPUM_SF_MIN_SDB = 15; | |
| static unsigned long __read_mostly CPUM_SF_MAX_SDB = 8176; | |
| static unsigned long __read_mostly CPUM_SF_SDB_DIAG_FACTOR = 1; | |
| struct sf_buffer { | |
| unsigned long *sdbt; /* Sample-data-block-table origin */ | |
| /* buffer characteristics (required for buffer increments) */ | |
| unsigned long num_sdb; /* Number of sample-data-blocks */ | |
| unsigned long num_sdbt; /* Number of sample-data-block-tables */ | |
| unsigned long *tail; /* last sample-data-block-table */ | |
| }; | |
| struct aux_buffer { | |
| struct sf_buffer sfb; | |
| unsigned long head; /* index of SDB of buffer head */ | |
| unsigned long alert_mark; /* index of SDB of alert request position */ | |
| unsigned long empty_mark; /* mark of SDB not marked full */ | |
| unsigned long *sdb_index; /* SDB address for fast lookup */ | |
| unsigned long *sdbt_index; /* SDBT address for fast lookup */ | |
| }; | |
| struct cpu_hw_sf { | |
| /* CPU-measurement sampling information block */ | |
| struct hws_qsi_info_block qsi; | |
| /* CPU-measurement sampling control block */ | |
| struct hws_lsctl_request_block lsctl; | |
| struct sf_buffer sfb; /* Sampling buffer */ | |
| unsigned int flags; /* Status flags */ | |
| struct perf_event *event; /* Scheduled perf event */ | |
| struct perf_output_handle handle; /* AUX buffer output handle */ | |
| }; | |
| static DEFINE_PER_CPU(struct cpu_hw_sf, cpu_hw_sf); | |
| /* Debug feature */ | |
| static debug_info_t *sfdbg; | |
| /* Sampling control helper functions */ | |
| static inline unsigned long freq_to_sample_rate(struct hws_qsi_info_block *qsi, | |
| unsigned long freq) | |
| { | |
| return (USEC_PER_SEC / freq) * qsi->cpu_speed; | |
| } | |
| static inline unsigned long sample_rate_to_freq(struct hws_qsi_info_block *qsi, | |
| unsigned long rate) | |
| { | |
| return USEC_PER_SEC * qsi->cpu_speed / rate; | |
| } | |
| /* Return pointer to trailer entry of an sample data block */ | |
| static inline struct hws_trailer_entry *trailer_entry_ptr(unsigned long v) | |
| { | |
| void *ret; | |
| ret = (void *)v; | |
| ret += PAGE_SIZE; | |
| ret -= sizeof(struct hws_trailer_entry); | |
| return ret; | |
| } | |
| /* | |
| * Return true if the entry in the sample data block table (sdbt) | |
| * is a link to the next sdbt | |
| */ | |
| static inline int is_link_entry(unsigned long *s) | |
| { | |
| return *s & 0x1UL ? 1 : 0; | |
| } | |
| /* Return pointer to the linked sdbt */ | |
| static inline unsigned long *get_next_sdbt(unsigned long *s) | |
| { | |
| return phys_to_virt(*s & ~0x1UL); | |
| } | |
| /* | |
| * sf_disable() - Switch off sampling facility | |
| */ | |
| static void sf_disable(void) | |
| { | |
| struct hws_lsctl_request_block sreq; | |
| memset(&sreq, 0, sizeof(sreq)); | |
| lsctl(&sreq); | |
| } | |
| /* | |
| * sf_buffer_available() - Check for an allocated sampling buffer | |
| */ | |
| static int sf_buffer_available(struct cpu_hw_sf *cpuhw) | |
| { | |
| return !!cpuhw->sfb.sdbt; | |
| } | |
| /* | |
| * deallocate sampling facility buffer | |
| */ | |
| static void free_sampling_buffer(struct sf_buffer *sfb) | |
| { | |
| unsigned long *sdbt, *curr, *head; | |
| sdbt = sfb->sdbt; | |
| if (!sdbt) | |
| return; | |
| sfb->sdbt = NULL; | |
| /* Free the SDBT after all SDBs are processed... */ | |
| head = sdbt; | |
| curr = sdbt; | |
| do { | |
| if (is_link_entry(curr)) { | |
| /* Process table-link entries */ | |
| curr = get_next_sdbt(curr); | |
| free_page((unsigned long)sdbt); | |
| sdbt = curr; | |
| } else { | |
| /* Process SDB pointer */ | |
| free_page((unsigned long)phys_to_virt(*curr)); | |
| curr++; | |
| } | |
| } while (curr != head); | |
| memset(sfb, 0, sizeof(*sfb)); | |
| } | |
| static int alloc_sample_data_block(unsigned long *sdbt, gfp_t gfp_flags) | |
| { | |
| struct hws_trailer_entry *te; | |
| unsigned long sdb; | |
| /* Allocate and initialize sample-data-block */ | |
| sdb = get_zeroed_page(gfp_flags); | |
| if (!sdb) | |
| return -ENOMEM; | |
| te = trailer_entry_ptr(sdb); | |
| te->header.a = 1; | |
| /* Link SDB into the sample-data-block-table */ | |
| *sdbt = virt_to_phys((void *)sdb); | |
| return 0; | |
| } | |
| /* | |
| * realloc_sampling_buffer() - extend sampler memory | |
| * | |
| * Allocates new sample-data-blocks and adds them to the specified sampling | |
| * buffer memory. | |
| * | |
| * Important: This modifies the sampling buffer and must be called when the | |
| * sampling facility is disabled. | |
| * | |
| * Returns zero on success, non-zero otherwise. | |
| */ | |
| static int realloc_sampling_buffer(struct sf_buffer *sfb, | |
| unsigned long num_sdb, gfp_t gfp_flags) | |
| { | |
| int i, rc; | |
| unsigned long *new, *tail, *tail_prev = NULL; | |
| if (!sfb->sdbt || !sfb->tail) | |
| return -EINVAL; | |
| if (!is_link_entry(sfb->tail)) | |
| return -EINVAL; | |
| /* Append to the existing sampling buffer, overwriting the table-link | |
| * register. | |
| * The tail variables always points to the "tail" (last and table-link) | |
| * entry in an SDB-table. | |
| */ | |
| tail = sfb->tail; | |
| /* Do a sanity check whether the table-link entry points to | |
| * the sampling buffer origin. | |
| */ | |
| if (sfb->sdbt != get_next_sdbt(tail)) { | |
| debug_sprintf_event(sfdbg, 3, "%s buffer not linked origin %#lx tail %#lx\n", | |
| __func__, (unsigned long)sfb->sdbt, | |
| (unsigned long)tail); | |
| return -EINVAL; | |
| } | |
| /* Allocate remaining SDBs */ | |
| rc = 0; | |
| for (i = 0; i < num_sdb; i++) { | |
| /* Allocate a new SDB-table if it is full. */ | |
| if (require_table_link(tail)) { | |
| new = (unsigned long *)get_zeroed_page(gfp_flags); | |
| if (!new) { | |
| rc = -ENOMEM; | |
| break; | |
| } | |
| sfb->num_sdbt++; | |
| /* Link current page to tail of chain */ | |
| *tail = virt_to_phys((void *)new) + 1; | |
| tail_prev = tail; | |
| tail = new; | |
| } | |
| /* Allocate a new sample-data-block. | |
| * If there is not enough memory, stop the realloc process | |
| * and simply use what was allocated. If this is a temporary | |
| * issue, a new realloc call (if required) might succeed. | |
| */ | |
| rc = alloc_sample_data_block(tail, gfp_flags); | |
| if (rc) { | |
| /* Undo last SDBT. An SDBT with no SDB at its first | |
| * entry but with an SDBT entry instead can not be | |
| * handled by the interrupt handler code. | |
| * Avoid this situation. | |
| */ | |
| if (tail_prev) { | |
| sfb->num_sdbt--; | |
| free_page((unsigned long)new); | |
| tail = tail_prev; | |
| } | |
| break; | |
| } | |
| sfb->num_sdb++; | |
| tail++; | |
| tail_prev = new = NULL; /* Allocated at least one SBD */ | |
| } | |
| /* Link sampling buffer to its origin */ | |
| *tail = virt_to_phys(sfb->sdbt) + 1; | |
| sfb->tail = tail; | |
| return rc; | |
| } | |
| /* | |
| * allocate_sampling_buffer() - allocate sampler memory | |
| * | |
| * Allocates and initializes a sampling buffer structure using the | |
| * specified number of sample-data-blocks (SDB). For each allocation, | |
| * a 4K page is used. The number of sample-data-block-tables (SDBT) | |
| * are calculated from SDBs. | |
| * Also set the ALERT_REQ mask in each SDBs trailer. | |
| * | |
| * Returns zero on success, non-zero otherwise. | |
| */ | |
| static int alloc_sampling_buffer(struct sf_buffer *sfb, unsigned long num_sdb) | |
| { | |
| int rc; | |
| if (sfb->sdbt) | |
| return -EINVAL; | |
| /* Allocate the sample-data-block-table origin */ | |
| sfb->sdbt = (unsigned long *)get_zeroed_page(GFP_KERNEL); | |
| if (!sfb->sdbt) | |
| return -ENOMEM; | |
| sfb->num_sdb = 0; | |
| sfb->num_sdbt = 1; | |
| /* Link the table origin to point to itself to prepare for | |
| * realloc_sampling_buffer() invocation. | |
| */ | |
| sfb->tail = sfb->sdbt; | |
| *sfb->tail = virt_to_phys((void *)sfb->sdbt) + 1; | |
| /* Allocate requested number of sample-data-blocks */ | |
| rc = realloc_sampling_buffer(sfb, num_sdb, GFP_KERNEL); | |
| if (rc) | |
| free_sampling_buffer(sfb); | |
| return rc; | |
| } | |
| static void sfb_set_limits(unsigned long min, unsigned long max) | |
| { | |
| struct hws_qsi_info_block si; | |
| CPUM_SF_MIN_SDB = min; | |
| CPUM_SF_MAX_SDB = max; | |
| memset(&si, 0, sizeof(si)); | |
| qsi(&si); | |
| CPUM_SF_SDB_DIAG_FACTOR = DIV_ROUND_UP(si.dsdes, si.bsdes); | |
| } | |
| static unsigned long sfb_max_limit(struct hw_perf_event *hwc) | |
| { | |
| return SAMPL_DIAG_MODE(hwc) ? CPUM_SF_MAX_SDB * CPUM_SF_SDB_DIAG_FACTOR | |
| : CPUM_SF_MAX_SDB; | |
| } | |
| static unsigned long sfb_pending_allocs(struct sf_buffer *sfb, | |
| struct hw_perf_event *hwc) | |
| { | |
| if (!sfb->sdbt) | |
| return SFB_ALLOC_REG(hwc); | |
| if (SFB_ALLOC_REG(hwc) > sfb->num_sdb) | |
| return SFB_ALLOC_REG(hwc) - sfb->num_sdb; | |
| return 0; | |
| } | |
| static void sfb_account_allocs(unsigned long num, struct hw_perf_event *hwc) | |
| { | |
| /* Limit the number of SDBs to not exceed the maximum */ | |
| num = min_t(unsigned long, num, sfb_max_limit(hwc) - SFB_ALLOC_REG(hwc)); | |
| if (num) | |
| SFB_ALLOC_REG(hwc) += num; | |
| } | |
| static void sfb_init_allocs(unsigned long num, struct hw_perf_event *hwc) | |
| { | |
| SFB_ALLOC_REG(hwc) = 0; | |
| sfb_account_allocs(num, hwc); | |
| } | |
| static void deallocate_buffers(struct cpu_hw_sf *cpuhw) | |
| { | |
| if (sf_buffer_available(cpuhw)) | |
| free_sampling_buffer(&cpuhw->sfb); | |
| } | |
| static int allocate_buffers(struct cpu_hw_sf *cpuhw, struct hw_perf_event *hwc) | |
| { | |
| unsigned long n_sdb, freq; | |
| /* Calculate sampling buffers using 4K pages | |
| * | |
| * 1. The sampling size is 32 bytes for basic sampling. This size | |
| * is the same for all machine types. Diagnostic | |
| * sampling uses auxlilary data buffer setup which provides the | |
| * memory for SDBs using linux common code auxiliary trace | |
| * setup. | |
| * | |
| * 2. Function alloc_sampling_buffer() sets the Alert Request | |
| * Control indicator to trigger a measurement-alert to harvest | |
| * sample-data-blocks (SDB). This is done per SDB. This | |
| * measurement alert interrupt fires quick enough to handle | |
| * one SDB, on very high frequency and work loads there might | |
| * be 2 to 3 SBDs available for sample processing. | |
| * Currently there is no need for setup alert request on every | |
| * n-th page. This is counterproductive as one IRQ triggers | |
| * a very high number of samples to be processed at one IRQ. | |
| * | |
| * 3. Use the sampling frequency as input. | |
| * Compute the number of SDBs and ensure a minimum | |
| * of CPUM_SF_MIN_SDB. Depending on frequency add some more | |
| * SDBs to handle a higher sampling rate. | |
| * Use a minimum of CPUM_SF_MIN_SDB and allow for 100 samples | |
| * (one SDB) for every 10000 HZ frequency increment. | |
| * | |
| * 4. Compute the number of sample-data-block-tables (SDBT) and | |
| * ensure a minimum of CPUM_SF_MIN_SDBT (one table can manage up | |
| * to 511 SDBs). | |
| */ | |
| freq = sample_rate_to_freq(&cpuhw->qsi, SAMPL_RATE(hwc)); | |
| n_sdb = CPUM_SF_MIN_SDB + DIV_ROUND_UP(freq, 10000); | |
| /* If there is already a sampling buffer allocated, it is very likely | |
| * that the sampling facility is enabled too. If the event to be | |
| * initialized requires a greater sampling buffer, the allocation must | |
| * be postponed. Changing the sampling buffer requires the sampling | |
| * facility to be in the disabled state. So, account the number of | |
| * required SDBs and let cpumsf_pmu_enable() resize the buffer just | |
| * before the event is started. | |
| */ | |
| sfb_init_allocs(n_sdb, hwc); | |
| if (sf_buffer_available(cpuhw)) | |
| return 0; | |
| return alloc_sampling_buffer(&cpuhw->sfb, | |
| sfb_pending_allocs(&cpuhw->sfb, hwc)); | |
| } | |
| static unsigned long min_percent(unsigned int percent, unsigned long base, | |
| unsigned long min) | |
| { | |
| return min_t(unsigned long, min, DIV_ROUND_UP(percent * base, 100)); | |
| } | |
| static unsigned long compute_sfb_extent(unsigned long ratio, unsigned long base) | |
| { | |
| /* Use a percentage-based approach to extend the sampling facility | |
| * buffer. Accept up to 5% sample data loss. | |
| * Vary the extents between 1% to 5% of the current number of | |
| * sample-data-blocks. | |
| */ | |
| if (ratio <= 5) | |
| return 0; | |
| if (ratio <= 25) | |
| return min_percent(1, base, 1); | |
| if (ratio <= 50) | |
| return min_percent(1, base, 1); | |
| if (ratio <= 75) | |
| return min_percent(2, base, 2); | |
| if (ratio <= 100) | |
| return min_percent(3, base, 3); | |
| if (ratio <= 250) | |
| return min_percent(4, base, 4); | |
| return min_percent(5, base, 8); | |
| } | |
| static void sfb_account_overflows(struct cpu_hw_sf *cpuhw, | |
| struct hw_perf_event *hwc) | |
| { | |
| unsigned long ratio, num; | |
| if (!OVERFLOW_REG(hwc)) | |
| return; | |
| /* The sample_overflow contains the average number of sample data | |
| * that has been lost because sample-data-blocks were full. | |
| * | |
| * Calculate the total number of sample data entries that has been | |
| * discarded. Then calculate the ratio of lost samples to total samples | |
| * per second in percent. | |
| */ | |
| ratio = DIV_ROUND_UP(100 * OVERFLOW_REG(hwc) * cpuhw->sfb.num_sdb, | |
| sample_rate_to_freq(&cpuhw->qsi, SAMPL_RATE(hwc))); | |
| /* Compute number of sample-data-blocks */ | |
| num = compute_sfb_extent(ratio, cpuhw->sfb.num_sdb); | |
| if (num) | |
| sfb_account_allocs(num, hwc); | |
| OVERFLOW_REG(hwc) = 0; | |
| } | |
| /* extend_sampling_buffer() - Extend sampling buffer | |
| * @sfb: Sampling buffer structure (for local CPU) | |
| * @hwc: Perf event hardware structure | |
| * | |
| * Use this function to extend the sampling buffer based on the overflow counter | |
| * and postponed allocation extents stored in the specified Perf event hardware. | |
| * | |
| * Important: This function disables the sampling facility in order to safely | |
| * change the sampling buffer structure. Do not call this function | |
| * when the PMU is active. | |
| */ | |
| static void extend_sampling_buffer(struct sf_buffer *sfb, | |
| struct hw_perf_event *hwc) | |
| { | |
| unsigned long num; | |
| num = sfb_pending_allocs(sfb, hwc); | |
| if (!num) | |
| return; | |
| /* Disable the sampling facility to reset any states and also | |
| * clear pending measurement alerts. | |
| */ | |
| sf_disable(); | |
| /* Extend the sampling buffer. | |
| * This memory allocation typically happens in an atomic context when | |
| * called by perf. Because this is a reallocation, it is fine if the | |
| * new SDB-request cannot be satisfied immediately. | |
| */ | |
| realloc_sampling_buffer(sfb, num, GFP_ATOMIC); | |
| } | |
| /* Number of perf events counting hardware events */ | |
| static refcount_t num_events; | |
| /* Used to avoid races in calling reserve/release_cpumf_hardware */ | |
| static DEFINE_MUTEX(pmc_reserve_mutex); | |
| #define PMC_INIT 0 | |
| #define PMC_RELEASE 1 | |
| static void setup_pmc_cpu(void *flags) | |
| { | |
| struct cpu_hw_sf *cpuhw = this_cpu_ptr(&cpu_hw_sf); | |
| sf_disable(); | |
| switch (*((int *)flags)) { | |
| case PMC_INIT: | |
| memset(cpuhw, 0, sizeof(*cpuhw)); | |
| qsi(&cpuhw->qsi); | |
| cpuhw->flags |= PMU_F_RESERVED; | |
| break; | |
| case PMC_RELEASE: | |
| cpuhw->flags &= ~PMU_F_RESERVED; | |
| deallocate_buffers(cpuhw); | |
| break; | |
| } | |
| } | |
| static void release_pmc_hardware(void) | |
| { | |
| int flags = PMC_RELEASE; | |
| irq_subclass_unregister(IRQ_SUBCLASS_MEASUREMENT_ALERT); | |
| on_each_cpu(setup_pmc_cpu, &flags, 1); | |
| } | |
| static void reserve_pmc_hardware(void) | |
| { | |
| int flags = PMC_INIT; | |
| on_each_cpu(setup_pmc_cpu, &flags, 1); | |
| irq_subclass_register(IRQ_SUBCLASS_MEASUREMENT_ALERT); | |
| } | |
| static void hw_perf_event_destroy(struct perf_event *event) | |
| { | |
| /* Release PMC if this is the last perf event */ | |
| if (refcount_dec_and_mutex_lock(&num_events, &pmc_reserve_mutex)) { | |
| release_pmc_hardware(); | |
| mutex_unlock(&pmc_reserve_mutex); | |
| } | |
| } | |
| static void hw_init_period(struct hw_perf_event *hwc, u64 period) | |
| { | |
| hwc->sample_period = period; | |
| hwc->last_period = hwc->sample_period; | |
| local64_set(&hwc->period_left, hwc->sample_period); | |
| } | |
| static unsigned long hw_limit_rate(const struct hws_qsi_info_block *si, | |
| unsigned long rate) | |
| { | |
| return clamp_t(unsigned long, rate, | |
| si->min_sampl_rate, si->max_sampl_rate); | |
| } | |
| static u32 cpumsf_pid_type(struct perf_event *event, | |
| u32 pid, enum pid_type type) | |
| { | |
| struct task_struct *tsk; | |
| /* Idle process */ | |
| if (!pid) | |
| goto out; | |
| tsk = find_task_by_pid_ns(pid, &init_pid_ns); | |
| pid = -1; | |
| if (tsk) { | |
| /* | |
| * Only top level events contain the pid namespace in which | |
| * they are created. | |
| */ | |
| if (event->parent) | |
| event = event->parent; | |
| pid = __task_pid_nr_ns(tsk, type, event->ns); | |
| /* | |
| * See also 1d953111b648 | |
| * "perf/core: Don't report zero PIDs for exiting tasks". | |
| */ | |
| if (!pid && !pid_alive(tsk)) | |
| pid = -1; | |
| } | |
| out: | |
| return pid; | |
| } | |
| static void cpumsf_output_event_pid(struct perf_event *event, | |
| struct perf_sample_data *data, | |
| struct pt_regs *regs) | |
| { | |
| u32 pid; | |
| struct perf_event_header header; | |
| struct perf_output_handle handle; | |
| /* | |
| * Obtain the PID from the basic-sampling data entry and | |
| * correct the data->tid_entry.pid value. | |
| */ | |
| pid = data->tid_entry.pid; | |
| /* Protect callchain buffers, tasks */ | |
| rcu_read_lock(); | |
| perf_prepare_sample(data, event, regs); | |
| perf_prepare_header(&header, data, event, regs); | |
| if (perf_output_begin(&handle, data, event, header.size)) | |
| goto out; | |
| /* Update the process ID (see also kernel/events/core.c) */ | |
| data->tid_entry.pid = cpumsf_pid_type(event, pid, PIDTYPE_TGID); | |
| data->tid_entry.tid = cpumsf_pid_type(event, pid, PIDTYPE_PID); | |
| perf_output_sample(&handle, &header, data, event); | |
| perf_output_end(&handle); | |
| out: | |
| rcu_read_unlock(); | |
| } | |
| static unsigned long getrate(bool freq, unsigned long sample, | |
| struct hws_qsi_info_block *si) | |
| { | |
| unsigned long rate; | |
| if (freq) { | |
| rate = freq_to_sample_rate(si, sample); | |
| rate = hw_limit_rate(si, rate); | |
| } else { | |
| /* The min/max sampling rates specifies the valid range | |
| * of sample periods. If the specified sample period is | |
| * out of range, limit the period to the range boundary. | |
| */ | |
| rate = hw_limit_rate(si, sample); | |
| /* The perf core maintains a maximum sample rate that is | |
| * configurable through the sysctl interface. Ensure the | |
| * sampling rate does not exceed this value. This also helps | |
| * to avoid throttling when pushing samples with | |
| * perf_event_overflow(). | |
| */ | |
| if (sample_rate_to_freq(si, rate) > | |
| sysctl_perf_event_sample_rate) { | |
| rate = 0; | |
| } | |
| } | |
| return rate; | |
| } | |
| /* The sampling information (si) contains information about the | |
| * min/max sampling intervals and the CPU speed. So calculate the | |
| * correct sampling interval and avoid the whole period adjust | |
| * feedback loop. | |
| * | |
| * Since the CPU Measurement sampling facility can not handle frequency | |
| * calculate the sampling interval when frequency is specified using | |
| * this formula: | |
| * interval := cpu_speed * 1000000 / sample_freq | |
| * | |
| * Returns errno on bad input and zero on success with parameter interval | |
| * set to the correct sampling rate. | |
| * | |
| * Note: This function turns off freq bit to avoid calling function | |
| * perf_adjust_period(). This causes frequency adjustment in the common | |
| * code part which causes tremendous variations in the counter values. | |
| */ | |
| static int __hw_perf_event_init_rate(struct perf_event *event, | |
| struct hws_qsi_info_block *si) | |
| { | |
| struct perf_event_attr *attr = &event->attr; | |
| struct hw_perf_event *hwc = &event->hw; | |
| unsigned long rate; | |
| if (attr->freq) { | |
| if (!attr->sample_freq) | |
| return -EINVAL; | |
| rate = getrate(attr->freq, attr->sample_freq, si); | |
| attr->freq = 0; /* Don't call perf_adjust_period() */ | |
| SAMPL_FLAGS(hwc) |= PERF_CPUM_SF_FREQ_MODE; | |
| } else { | |
| rate = getrate(attr->freq, attr->sample_period, si); | |
| if (!rate) | |
| return -EINVAL; | |
| } | |
| attr->sample_period = rate; | |
| SAMPL_RATE(hwc) = rate; | |
| hw_init_period(hwc, SAMPL_RATE(hwc)); | |
| return 0; | |
| } | |
| static int __hw_perf_event_init(struct perf_event *event) | |
| { | |
| struct cpu_hw_sf *cpuhw; | |
| struct hws_qsi_info_block si; | |
| struct perf_event_attr *attr = &event->attr; | |
| struct hw_perf_event *hwc = &event->hw; | |
| int cpu, err = 0; | |
| /* Reserve CPU-measurement sampling facility */ | |
| mutex_lock(&pmc_reserve_mutex); | |
| if (!refcount_inc_not_zero(&num_events)) { | |
| reserve_pmc_hardware(); | |
| refcount_set(&num_events, 1); | |
| } | |
| event->destroy = hw_perf_event_destroy; | |
| /* Access per-CPU sampling information (query sampling info) */ | |
| /* | |
| * The event->cpu value can be -1 to count on every CPU, for example, | |
| * when attaching to a task. If this is specified, use the query | |
| * sampling info from the current CPU, otherwise use event->cpu to | |
| * retrieve the per-CPU information. | |
| * Later, cpuhw indicates whether to allocate sampling buffers for a | |
| * particular CPU (cpuhw!=NULL) or each online CPU (cpuw==NULL). | |
| */ | |
| memset(&si, 0, sizeof(si)); | |
| cpuhw = NULL; | |
| if (event->cpu == -1) { | |
| qsi(&si); | |
| } else { | |
| /* Event is pinned to a particular CPU, retrieve the per-CPU | |
| * sampling structure for accessing the CPU-specific QSI. | |
| */ | |
| cpuhw = &per_cpu(cpu_hw_sf, event->cpu); | |
| si = cpuhw->qsi; | |
| } | |
| /* Check sampling facility authorization and, if not authorized, | |
| * fall back to other PMUs. It is safe to check any CPU because | |
| * the authorization is identical for all configured CPUs. | |
| */ | |
| if (!si.as) { | |
| err = -ENOENT; | |
| goto out; | |
| } | |
| if (si.ribm & CPU_MF_SF_RIBM_NOTAV) { | |
| pr_warn("CPU Measurement Facility sampling is temporarily not available\n"); | |
| err = -EBUSY; | |
| goto out; | |
| } | |
| /* Always enable basic sampling */ | |
| SAMPL_FLAGS(hwc) = PERF_CPUM_SF_BASIC_MODE; | |
| /* Check if diagnostic sampling is requested. Deny if the required | |
| * sampling authorization is missing. | |
| */ | |
| if (attr->config == PERF_EVENT_CPUM_SF_DIAG) { | |
| if (!si.ad) { | |
| err = -EPERM; | |
| goto out; | |
| } | |
| SAMPL_FLAGS(hwc) |= PERF_CPUM_SF_DIAG_MODE; | |
| } | |
| err = __hw_perf_event_init_rate(event, &si); | |
| if (err) | |
| goto out; | |
| /* Use AUX buffer. No need to allocate it by ourself */ | |
| if (attr->config == PERF_EVENT_CPUM_SF_DIAG) | |
| goto out; | |
| /* Allocate the per-CPU sampling buffer using the CPU information | |
| * from the event. If the event is not pinned to a particular | |
| * CPU (event->cpu == -1; or cpuhw == NULL), allocate sampling | |
| * buffers for each online CPU. | |
| */ | |
| if (cpuhw) | |
| /* Event is pinned to a particular CPU */ | |
| err = allocate_buffers(cpuhw, hwc); | |
| else { | |
| /* Event is not pinned, allocate sampling buffer on | |
| * each online CPU | |
| */ | |
| for_each_online_cpu(cpu) { | |
| cpuhw = &per_cpu(cpu_hw_sf, cpu); | |
| err = allocate_buffers(cpuhw, hwc); | |
| if (err) | |
| break; | |
| } | |
| } | |
| /* If PID/TID sampling is active, replace the default overflow | |
| * handler to extract and resolve the PIDs from the basic-sampling | |
| * data entries. | |
| */ | |
| if (event->attr.sample_type & PERF_SAMPLE_TID) | |
| if (is_default_overflow_handler(event)) | |
| event->overflow_handler = cpumsf_output_event_pid; | |
| out: | |
| mutex_unlock(&pmc_reserve_mutex); | |
| return err; | |
| } | |
| static bool is_callchain_event(struct perf_event *event) | |
| { | |
| u64 sample_type = event->attr.sample_type; | |
| return sample_type & (PERF_SAMPLE_CALLCHAIN | PERF_SAMPLE_REGS_USER | | |
| PERF_SAMPLE_REGS_INTR | PERF_SAMPLE_STACK_USER); | |
| } | |
| static int cpumsf_pmu_event_init(struct perf_event *event) | |
| { | |
| int err; | |
| /* No support for taken branch sampling */ | |
| /* No support for callchain, stacks and registers */ | |
| if (has_branch_stack(event) || is_callchain_event(event)) | |
| return -EOPNOTSUPP; | |
| switch (event->attr.type) { | |
| case PERF_TYPE_RAW: | |
| if ((event->attr.config != PERF_EVENT_CPUM_SF) && | |
| (event->attr.config != PERF_EVENT_CPUM_SF_DIAG)) | |
| return -ENOENT; | |
| break; | |
| case PERF_TYPE_HARDWARE: | |
| /* Support sampling of CPU cycles in addition to the | |
| * counter facility. However, the counter facility | |
| * is more precise and, hence, restrict this PMU to | |
| * sampling events only. | |
| */ | |
| if (event->attr.config != PERF_COUNT_HW_CPU_CYCLES) | |
| return -ENOENT; | |
| if (!is_sampling_event(event)) | |
| return -ENOENT; | |
| break; | |
| default: | |
| return -ENOENT; | |
| } | |
| /* Force reset of idle/hv excludes regardless of what the | |
| * user requested. | |
| */ | |
| if (event->attr.exclude_hv) | |
| event->attr.exclude_hv = 0; | |
| if (event->attr.exclude_idle) | |
| event->attr.exclude_idle = 0; | |
| err = __hw_perf_event_init(event); | |
| return err; | |
| } | |
| static void cpumsf_pmu_enable(struct pmu *pmu) | |
| { | |
| struct cpu_hw_sf *cpuhw = this_cpu_ptr(&cpu_hw_sf); | |
| struct hw_perf_event *hwc; | |
| int err; | |
| /* | |
| * Event must be | |
| * - added/started on this CPU (PMU_F_IN_USE set) | |
| * - and CPU must be available (PMU_F_RESERVED set) | |
| * - and not already enabled (PMU_F_ENABLED not set) | |
| * - and not in error condition (PMU_F_ERR_MASK not set) | |
| */ | |
| if (cpuhw->flags != (PMU_F_IN_USE | PMU_F_RESERVED)) | |
| return; | |
| /* Check whether to extent the sampling buffer. | |
| * | |
| * Two conditions trigger an increase of the sampling buffer for a | |
| * perf event: | |
| * 1. Postponed buffer allocations from the event initialization. | |
| * 2. Sampling overflows that contribute to pending allocations. | |
| * | |
| * Note that the extend_sampling_buffer() function disables the sampling | |
| * facility, but it can be fully re-enabled using sampling controls that | |
| * have been saved in cpumsf_pmu_disable(). | |
| */ | |
| hwc = &cpuhw->event->hw; | |
| if (!(SAMPL_DIAG_MODE(hwc))) { | |
| /* | |
| * Account number of overflow-designated buffer extents | |
| */ | |
| sfb_account_overflows(cpuhw, hwc); | |
| extend_sampling_buffer(&cpuhw->sfb, hwc); | |
| } | |
| /* Rate may be adjusted with ioctl() */ | |
| cpuhw->lsctl.interval = SAMPL_RATE(hwc); | |
| /* (Re)enable the PMU and sampling facility */ | |
| err = lsctl(&cpuhw->lsctl); | |
| if (err) { | |
| pr_err("Loading sampling controls failed: op 1 err %i\n", err); | |
| return; | |
| } | |
| /* Load current program parameter */ | |
| lpp(&get_lowcore()->lpp); | |
| cpuhw->flags |= PMU_F_ENABLED; | |
| } | |
| static void cpumsf_pmu_disable(struct pmu *pmu) | |
| { | |
| struct cpu_hw_sf *cpuhw = this_cpu_ptr(&cpu_hw_sf); | |
| struct hws_lsctl_request_block inactive; | |
| struct hws_qsi_info_block si; | |
| int err; | |
| if (!(cpuhw->flags & PMU_F_ENABLED)) | |
| return; | |
| if (cpuhw->flags & PMU_F_ERR_MASK) | |
| return; | |
| /* Switch off sampling activation control */ | |
| inactive = cpuhw->lsctl; | |
| inactive.cs = 0; | |
| inactive.cd = 0; | |
| err = lsctl(&inactive); | |
| if (err) { | |
| pr_err("Loading sampling controls failed: op 2 err %i\n", err); | |
| return; | |
| } | |
| /* | |
| * Save state of TEAR and DEAR register contents. | |
| * TEAR/DEAR values are valid only if the sampling facility is | |
| * enabled. Note that cpumsf_pmu_disable() might be called even | |
| * for a disabled sampling facility because cpumsf_pmu_enable() | |
| * controls the enable/disable state. | |
| */ | |
| qsi(&si); | |
| if (si.es) { | |
| cpuhw->lsctl.tear = si.tear; | |
| cpuhw->lsctl.dear = si.dear; | |
| } | |
| cpuhw->flags &= ~PMU_F_ENABLED; | |
| } | |
| /* perf_event_exclude() - Filter event | |
| * @event: The perf event | |
| * @regs: pt_regs structure | |
| * @sde_regs: Sample-data-entry (sde) regs structure | |
| * | |
| * Filter perf events according to their exclude specification. | |
| * | |
| * Return non-zero if the event shall be excluded. | |
| */ | |
| static int perf_event_exclude(struct perf_event *event, struct pt_regs *regs, | |
| struct perf_sf_sde_regs *sde_regs) | |
| { | |
| if (event->attr.exclude_user && user_mode(regs)) | |
| return 1; | |
| if (event->attr.exclude_kernel && !user_mode(regs)) | |
| return 1; | |
| if (event->attr.exclude_guest && sde_regs->in_guest) | |
| return 1; | |
| if (event->attr.exclude_host && !sde_regs->in_guest) | |
| return 1; | |
| return 0; | |
| } | |
| /* perf_push_sample() - Push samples to perf | |
| * @event: The perf event | |
| * @sample: Hardware sample data | |
| * | |
| * Use the hardware sample data to create perf event sample. The sample | |
| * is the pushed to the event subsystem and the function checks for | |
| * possible event overflows. If an event overflow occurs, the PMU is | |
| * stopped. | |
| * | |
| * Return non-zero if an event overflow occurred. | |
| */ | |
| static int perf_push_sample(struct perf_event *event, | |
| struct hws_basic_entry *basic) | |
| { | |
| int overflow; | |
| struct pt_regs regs; | |
| struct perf_sf_sde_regs *sde_regs; | |
| struct perf_sample_data data; | |
| /* Setup perf sample */ | |
| perf_sample_data_init(&data, 0, event->hw.last_period); | |
| /* Setup pt_regs to look like an CPU-measurement external interrupt | |
| * using the Program Request Alert code. The regs.int_parm_long | |
| * field which is unused contains additional sample-data-entry related | |
| * indicators. | |
| */ | |
| memset(®s, 0, sizeof(regs)); | |
| regs.int_code = 0x1407; | |
| regs.int_parm = CPU_MF_INT_SF_PRA; | |
| sde_regs = (struct perf_sf_sde_regs *) ®s.int_parm_long; | |
| psw_bits(regs.psw).ia = basic->ia; | |
| psw_bits(regs.psw).dat = basic->T; | |
| psw_bits(regs.psw).wait = basic->W; | |
| psw_bits(regs.psw).pstate = basic->P; | |
| psw_bits(regs.psw).as = basic->AS; | |
| /* | |
| * Use the hardware provided configuration level to decide if the | |
| * sample belongs to a guest or host. If that is not available, | |
| * fall back to the following heuristics: | |
| * A non-zero guest program parameter always indicates a guest | |
| * sample. Some early samples or samples from guests without | |
| * lpp usage would be misaccounted to the host. We use the asn | |
| * value as an addon heuristic to detect most of these guest samples. | |
| * If the value differs from 0xffff (the host value), we assume to | |
| * be a KVM guest. | |
| */ | |
| switch (basic->CL) { | |
| case 1: /* logical partition */ | |
| sde_regs->in_guest = 0; | |
| break; | |
| case 2: /* virtual machine */ | |
| sde_regs->in_guest = 1; | |
| break; | |
| default: /* old machine, use heuristics */ | |
| if (basic->gpp || basic->prim_asn != 0xffff) | |
| sde_regs->in_guest = 1; | |
| break; | |
| } | |
| /* | |
| * Store the PID value from the sample-data-entry to be | |
| * processed and resolved by cpumsf_output_event_pid(). | |
| */ | |
| data.tid_entry.pid = basic->hpp & LPP_PID_MASK; | |
| overflow = 0; | |
| if (perf_event_exclude(event, ®s, sde_regs)) | |
| goto out; | |
| overflow = perf_event_overflow(event, &data, ®s); | |
| perf_event_update_userpage(event); | |
| out: | |
| return overflow; | |
| } | |
| static void perf_event_count_update(struct perf_event *event, u64 count) | |
| { | |
| local64_add(count, &event->count); | |
| } | |
| /* hw_collect_samples() - Walk through a sample-data-block and collect samples | |
| * @event: The perf event | |
| * @sdbt: Sample-data-block table | |
| * @overflow: Event overflow counter | |
| * | |
| * Walks through a sample-data-block and collects sampling data entries that are | |
| * then pushed to the perf event subsystem. Depending on the sampling function, | |
| * there can be either basic-sampling or combined-sampling data entries. A | |
| * combined-sampling data entry consists of a basic- and a diagnostic-sampling | |
| * data entry. The sampling function is determined by the flags in the perf | |
| * event hardware structure. The function always works with a combined-sampling | |
| * data entry but ignores the diagnostic portion if it is not available. | |
| * | |
| * Note that the implementation focuses on basic-sampling data entries and, if | |
| * such an entry is not valid, the entire combined-sampling data entry is | |
| * ignored. | |
| * | |
| * The overflow variables counts the number of samples that has been discarded | |
| * due to a perf event overflow. | |
| */ | |
| static void hw_collect_samples(struct perf_event *event, unsigned long *sdbt, | |
| unsigned long long *overflow) | |
| { | |
| struct hws_trailer_entry *te; | |
| struct hws_basic_entry *sample; | |
| te = trailer_entry_ptr((unsigned long)sdbt); | |
| sample = (struct hws_basic_entry *)sdbt; | |
| while ((unsigned long *)sample < (unsigned long *)te) { | |
| /* Check for an empty sample */ | |
| if (!sample->def || sample->LS) | |
| break; | |
| /* Update perf event period */ | |
| perf_event_count_update(event, SAMPL_RATE(&event->hw)); | |
| /* Check whether sample is valid */ | |
| if (sample->def == 0x0001) { | |
| /* If an event overflow occurred, the PMU is stopped to | |
| * throttle event delivery. Remaining sample data is | |
| * discarded. | |
| */ | |
| if (!*overflow) { | |
| /* Check whether sample is consistent */ | |
| if (sample->I == 0 && sample->W == 0) { | |
| /* Deliver sample data to perf */ | |
| *overflow = perf_push_sample(event, | |
| sample); | |
| } | |
| } else | |
| /* Count discarded samples */ | |
| *overflow += 1; | |
| } else { | |
| /* Sample slot is not yet written or other record. | |
| * | |
| * This condition can occur if the buffer was reused | |
| * from a combined basic- and diagnostic-sampling. | |
| * If only basic-sampling is then active, entries are | |
| * written into the larger diagnostic entries. | |
| * This is typically the case for sample-data-blocks | |
| * that are not full. Stop processing if the first | |
| * invalid format was detected. | |
| */ | |
| if (!te->header.f) | |
| break; | |
| } | |
| /* Reset sample slot and advance to next sample */ | |
| sample->def = 0; | |
| sample++; | |
| } | |
| } | |
| /* hw_perf_event_update() - Process sampling buffer | |
| * @event: The perf event | |
| * @flush_all: Flag to also flush partially filled sample-data-blocks | |
| * | |
| * Processes the sampling buffer and create perf event samples. | |
| * The sampling buffer position are retrieved and saved in the TEAR_REG | |
| * register of the specified perf event. | |
| * | |
| * Only full sample-data-blocks are processed. Specify the flush_all flag | |
| * to also walk through partially filled sample-data-blocks. | |
| */ | |
| static void hw_perf_event_update(struct perf_event *event, int flush_all) | |
| { | |
| unsigned long long event_overflow, sampl_overflow, num_sdb; | |
| struct cpu_hw_sf *cpuhw = this_cpu_ptr(&cpu_hw_sf); | |
| struct hw_perf_event *hwc = &event->hw; | |
| union hws_trailer_header prev, new; | |
| struct hws_trailer_entry *te; | |
| unsigned long *sdbt, sdb; | |
| int done; | |
| /* | |
| * AUX buffer is used when in diagnostic sampling mode. | |
| * No perf events/samples are created. | |
| */ | |
| if (SAMPL_DIAG_MODE(hwc)) | |
| return; | |
| sdbt = (unsigned long *)TEAR_REG(hwc); | |
| done = event_overflow = sampl_overflow = num_sdb = 0; | |
| while (!done) { | |
| /* Get the trailer entry of the sample-data-block */ | |
| sdb = (unsigned long)phys_to_virt(*sdbt); | |
| te = trailer_entry_ptr(sdb); | |
| /* Leave loop if no more work to do (block full indicator) */ | |
| if (!te->header.f) { | |
| done = 1; | |
| if (!flush_all) | |
| break; | |
| } | |
| /* Check the sample overflow count */ | |
| if (te->header.overflow) | |
| /* Account sample overflows and, if a particular limit | |
| * is reached, extend the sampling buffer. | |
| * For details, see sfb_account_overflows(). | |
| */ | |
| sampl_overflow += te->header.overflow; | |
| /* Collect all samples from a single sample-data-block and | |
| * flag if an (perf) event overflow happened. If so, the PMU | |
| * is stopped and remaining samples will be discarded. | |
| */ | |
| hw_collect_samples(event, (unsigned long *)sdb, &event_overflow); | |
| num_sdb++; | |
| /* Reset trailer (using compare-double-and-swap) */ | |
| prev.val = READ_ONCE_ALIGNED_128(te->header.val); | |
| do { | |
| new.val = prev.val; | |
| new.f = 0; | |
| new.a = 1; | |
| new.overflow = 0; | |
| } while (!try_cmpxchg128(&te->header.val, &prev.val, new.val)); | |
| /* Advance to next sample-data-block */ | |
| sdbt++; | |
| if (is_link_entry(sdbt)) | |
| sdbt = get_next_sdbt(sdbt); | |
| /* Update event hardware registers */ | |
| TEAR_REG(hwc) = (unsigned long)sdbt; | |
| /* Stop processing sample-data if all samples of the current | |
| * sample-data-block were flushed even if it was not full. | |
| */ | |
| if (flush_all && done) | |
| break; | |
| } | |
| /* Account sample overflows in the event hardware structure */ | |
| if (sampl_overflow) | |
| OVERFLOW_REG(hwc) = DIV_ROUND_UP(OVERFLOW_REG(hwc) + | |
| sampl_overflow, 1 + num_sdb); | |
| /* Perf_event_overflow() and perf_event_account_interrupt() limit | |
| * the interrupt rate to an upper limit. Roughly 1000 samples per | |
| * task tick. | |
| * Hitting this limit results in a large number | |
| * of throttled REF_REPORT_THROTTLE entries and the samples | |
| * are dropped. | |
| * Slightly increase the interval to avoid hitting this limit. | |
| */ | |
| if (event_overflow) { | |
| SAMPL_RATE(hwc) += DIV_ROUND_UP(SAMPL_RATE(hwc), 10); | |
| if (SAMPL_RATE(hwc) > cpuhw->qsi.max_sampl_rate) | |
| SAMPL_RATE(hwc) = cpuhw->qsi.max_sampl_rate; | |
| } | |
| } | |
| static inline unsigned long aux_sdb_index(struct aux_buffer *aux, | |
| unsigned long i) | |
| { | |
| return i % aux->sfb.num_sdb; | |
| } | |
| static inline unsigned long aux_sdb_num(unsigned long start, unsigned long end) | |
| { | |
| return end >= start ? end - start + 1 : 0; | |
| } | |
| static inline unsigned long aux_sdb_num_alert(struct aux_buffer *aux) | |
| { | |
| return aux_sdb_num(aux->head, aux->alert_mark); | |
| } | |
| static inline unsigned long aux_sdb_num_empty(struct aux_buffer *aux) | |
| { | |
| return aux_sdb_num(aux->head, aux->empty_mark); | |
| } | |
| /* | |
| * Get trailer entry by index of SDB. | |
| */ | |
| static struct hws_trailer_entry *aux_sdb_trailer(struct aux_buffer *aux, | |
| unsigned long index) | |
| { | |
| unsigned long sdb; | |
| index = aux_sdb_index(aux, index); | |
| sdb = aux->sdb_index[index]; | |
| return trailer_entry_ptr(sdb); | |
| } | |
| /* | |
| * Finish sampling on the cpu. Called by cpumsf_pmu_del() with pmu | |
| * disabled. Collect the full SDBs in AUX buffer which have not reached | |
| * the point of alert indicator. And ignore the SDBs which are not | |
| * full. | |
| * | |
| * 1. Scan SDBs to see how much data is there and consume them. | |
| * 2. Remove alert indicator in the buffer. | |
| */ | |
| static void aux_output_end(struct perf_output_handle *handle) | |
| { | |
| unsigned long i, range_scan, idx; | |
| struct aux_buffer *aux; | |
| struct hws_trailer_entry *te; | |
| aux = perf_get_aux(handle); | |
| if (!aux) | |
| return; | |
| range_scan = aux_sdb_num_alert(aux); | |
| for (i = 0, idx = aux->head; i < range_scan; i++, idx++) { | |
| te = aux_sdb_trailer(aux, idx); | |
| if (!te->header.f) | |
| break; | |
| } | |
| /* i is num of SDBs which are full */ | |
| perf_aux_output_end(handle, i << PAGE_SHIFT); | |
| /* Remove alert indicators in the buffer */ | |
| te = aux_sdb_trailer(aux, aux->alert_mark); | |
| te->header.a = 0; | |
| } | |
| /* | |
| * Start sampling on the CPU. Called by cpumsf_pmu_add() when an event | |
| * is first added to the CPU or rescheduled again to the CPU. It is called | |
| * with pmu disabled. | |
| * | |
| * 1. Reset the trailer of SDBs to get ready for new data. | |
| * 2. Tell the hardware where to put the data by reset the SDBs buffer | |
| * head(tear/dear). | |
| */ | |
| static int aux_output_begin(struct perf_output_handle *handle, | |
| struct aux_buffer *aux, | |
| struct cpu_hw_sf *cpuhw) | |
| { | |
| unsigned long range, i, range_scan, idx, head, base, offset; | |
| struct hws_trailer_entry *te; | |
| if (handle->head & ~PAGE_MASK) | |
| return -EINVAL; | |
| aux->head = handle->head >> PAGE_SHIFT; | |
| range = (handle->size + 1) >> PAGE_SHIFT; | |
| if (range <= 1) | |
| return -ENOMEM; | |
| /* | |
| * SDBs between aux->head and aux->empty_mark are already ready | |
| * for new data. range_scan is num of SDBs not within them. | |
| */ | |
| if (range > aux_sdb_num_empty(aux)) { | |
| range_scan = range - aux_sdb_num_empty(aux); | |
| idx = aux->empty_mark + 1; | |
| for (i = 0; i < range_scan; i++, idx++) { | |
| te = aux_sdb_trailer(aux, idx); | |
| te->header.f = 0; | |
| te->header.a = 0; | |
| te->header.overflow = 0; | |
| } | |
| /* Save the position of empty SDBs */ | |
| aux->empty_mark = aux->head + range - 1; | |
| } | |
| /* Set alert indicator */ | |
| aux->alert_mark = aux->head + range/2 - 1; | |
| te = aux_sdb_trailer(aux, aux->alert_mark); | |
| te->header.a = 1; | |
| /* Reset hardware buffer head */ | |
| head = aux_sdb_index(aux, aux->head); | |
| base = aux->sdbt_index[head / CPUM_SF_SDB_PER_TABLE]; | |
| offset = head % CPUM_SF_SDB_PER_TABLE; | |
| cpuhw->lsctl.tear = virt_to_phys((void *)base) + offset * sizeof(unsigned long); | |
| cpuhw->lsctl.dear = virt_to_phys((void *)aux->sdb_index[head]); | |
| return 0; | |
| } | |
| /* | |
| * Set alert indicator on SDB at index @alert_index while sampler is running. | |
| * | |
| * Return true if successfully. | |
| * Return false if full indicator is already set by hardware sampler. | |
| */ | |
| static bool aux_set_alert(struct aux_buffer *aux, unsigned long alert_index, | |
| unsigned long long *overflow) | |
| { | |
| union hws_trailer_header prev, new; | |
| struct hws_trailer_entry *te; | |
| te = aux_sdb_trailer(aux, alert_index); | |
| prev.val = READ_ONCE_ALIGNED_128(te->header.val); | |
| do { | |
| new.val = prev.val; | |
| *overflow = prev.overflow; | |
| if (prev.f) { | |
| /* | |
| * SDB is already set by hardware. | |
| * Abort and try to set somewhere | |
| * behind. | |
| */ | |
| return false; | |
| } | |
| new.a = 1; | |
| new.overflow = 0; | |
| } while (!try_cmpxchg128(&te->header.val, &prev.val, new.val)); | |
| return true; | |
| } | |
| /* | |
| * aux_reset_buffer() - Scan and setup SDBs for new samples | |
| * @aux: The AUX buffer to set | |
| * @range: The range of SDBs to scan started from aux->head | |
| * @overflow: Set to overflow count | |
| * | |
| * Set alert indicator on the SDB at index of aux->alert_mark. If this SDB is | |
| * marked as empty, check if it is already set full by the hardware sampler. | |
| * If yes, that means new data is already there before we can set an alert | |
| * indicator. Caller should try to set alert indicator to some position behind. | |
| * | |
| * Scan the SDBs in AUX buffer from behind aux->empty_mark. They are used | |
| * previously and have already been consumed by user space. Reset these SDBs | |
| * (clear full indicator and alert indicator) for new data. | |
| * If aux->alert_mark fall in this area, just set it. Overflow count is | |
| * recorded while scanning. | |
| * | |
| * SDBs between aux->head and aux->empty_mark are already reset at last time. | |
| * and ready for new samples. So scanning on this area could be skipped. | |
| * | |
| * Return true if alert indicator is set successfully and false if not. | |
| */ | |
| static bool aux_reset_buffer(struct aux_buffer *aux, unsigned long range, | |
| unsigned long long *overflow) | |
| { | |
| union hws_trailer_header prev, new; | |
| unsigned long i, range_scan, idx; | |
| unsigned long long orig_overflow; | |
| struct hws_trailer_entry *te; | |
| if (range <= aux_sdb_num_empty(aux)) | |
| /* | |
| * No need to scan. All SDBs in range are marked as empty. | |
| * Just set alert indicator. Should check race with hardware | |
| * sampler. | |
| */ | |
| return aux_set_alert(aux, aux->alert_mark, overflow); | |
| if (aux->alert_mark <= aux->empty_mark) | |
| /* | |
| * Set alert indicator on empty SDB. Should check race | |
| * with hardware sampler. | |
| */ | |
| if (!aux_set_alert(aux, aux->alert_mark, overflow)) | |
| return false; | |
| /* | |
| * Scan the SDBs to clear full and alert indicator used previously. | |
| * Start scanning from one SDB behind empty_mark. If the new alert | |
| * indicator fall into this range, set it. | |
| */ | |
| range_scan = range - aux_sdb_num_empty(aux); | |
| idx = aux->empty_mark + 1; | |
| for (i = 0; i < range_scan; i++, idx++) { | |
| te = aux_sdb_trailer(aux, idx); | |
| prev.val = READ_ONCE_ALIGNED_128(te->header.val); | |
| do { | |
| new.val = prev.val; | |
| orig_overflow = prev.overflow; | |
| new.f = 0; | |
| new.overflow = 0; | |
| if (idx == aux->alert_mark) | |
| new.a = 1; | |
| else | |
| new.a = 0; | |
| } while (!try_cmpxchg128(&te->header.val, &prev.val, new.val)); | |
| *overflow += orig_overflow; | |
| } | |
| /* Update empty_mark to new position */ | |
| aux->empty_mark = aux->head + range - 1; | |
| return true; | |
| } | |
| /* | |
| * Measurement alert handler for diagnostic mode sampling. | |
| */ | |
| static void hw_collect_aux(struct cpu_hw_sf *cpuhw) | |
| { | |
| struct aux_buffer *aux; | |
| int done = 0; | |
| unsigned long range = 0, size; | |
| unsigned long long overflow = 0; | |
| struct perf_output_handle *handle = &cpuhw->handle; | |
| unsigned long num_sdb; | |
| aux = perf_get_aux(handle); | |
| if (!aux) | |
| return; | |
| /* Inform user space new data arrived */ | |
| size = aux_sdb_num_alert(aux) << PAGE_SHIFT; | |
| debug_sprintf_event(sfdbg, 6, "%s #alert %ld\n", __func__, | |
| size >> PAGE_SHIFT); | |
| perf_aux_output_end(handle, size); | |
| num_sdb = aux->sfb.num_sdb; | |
| while (!done) { | |
| /* Get an output handle */ | |
| aux = perf_aux_output_begin(handle, cpuhw->event); | |
| if (handle->size == 0) { | |
| pr_err("The AUX buffer with %lu pages for the " | |
| "diagnostic-sampling mode is full\n", | |
| num_sdb); | |
| break; | |
| } | |
| if (!aux) | |
| return; | |
| /* Update head and alert_mark to new position */ | |
| aux->head = handle->head >> PAGE_SHIFT; | |
| range = (handle->size + 1) >> PAGE_SHIFT; | |
| if (range == 1) | |
| aux->alert_mark = aux->head; | |
| else | |
| aux->alert_mark = aux->head + range/2 - 1; | |
| if (aux_reset_buffer(aux, range, &overflow)) { | |
| if (!overflow) { | |
| done = 1; | |
| break; | |
| } | |
| size = range << PAGE_SHIFT; | |
| perf_aux_output_end(&cpuhw->handle, size); | |
| pr_err("Sample data caused the AUX buffer with %lu " | |
| "pages to overflow\n", aux->sfb.num_sdb); | |
| } else { | |
| size = aux_sdb_num_alert(aux) << PAGE_SHIFT; | |
| perf_aux_output_end(&cpuhw->handle, size); | |
| } | |
| } | |
| } | |
| /* | |
| * Callback when freeing AUX buffers. | |
| */ | |
| static void aux_buffer_free(void *data) | |
| { | |
| struct aux_buffer *aux = data; | |
| unsigned long i, num_sdbt; | |
| if (!aux) | |
| return; | |
| /* Free SDBT. SDB is freed by the caller */ | |
| num_sdbt = aux->sfb.num_sdbt; | |
| for (i = 0; i < num_sdbt; i++) | |
| free_page(aux->sdbt_index[i]); | |
| kfree(aux->sdbt_index); | |
| kfree(aux->sdb_index); | |
| kfree(aux); | |
| } | |
| static void aux_sdb_init(unsigned long sdb) | |
| { | |
| struct hws_trailer_entry *te; | |
| te = trailer_entry_ptr(sdb); | |
| /* Save clock base */ | |
| te->clock_base = 1; | |
| te->progusage2 = tod_clock_base.tod; | |
| } | |
| /* | |
| * aux_buffer_setup() - Setup AUX buffer for diagnostic mode sampling | |
| * @event: Event the buffer is setup for, event->cpu == -1 means current | |
| * @pages: Array of pointers to buffer pages passed from perf core | |
| * @nr_pages: Total pages | |
| * @snapshot: Flag for snapshot mode | |
| * | |
| * This is the callback when setup an event using AUX buffer. Perf tool can | |
| * trigger this by an additional mmap() call on the event. Unlike the buffer | |
| * for basic samples, AUX buffer belongs to the event. It is scheduled with | |
| * the task among online cpus when it is a per-thread event. | |
| * | |
| * Return the private AUX buffer structure if success or NULL if fails. | |
| */ | |
| static void *aux_buffer_setup(struct perf_event *event, void **pages, | |
| int nr_pages, bool snapshot) | |
| { | |
| struct sf_buffer *sfb; | |
| struct aux_buffer *aux; | |
| unsigned long *new, *tail; | |
| int i, n_sdbt; | |
| if (!nr_pages || !pages) | |
| return NULL; | |
| if (nr_pages > CPUM_SF_MAX_SDB * CPUM_SF_SDB_DIAG_FACTOR) { | |
| pr_err("AUX buffer size (%i pages) is larger than the " | |
| "maximum sampling buffer limit\n", | |
| nr_pages); | |
| return NULL; | |
| } else if (nr_pages < CPUM_SF_MIN_SDB * CPUM_SF_SDB_DIAG_FACTOR) { | |
| pr_err("AUX buffer size (%i pages) is less than the " | |
| "minimum sampling buffer limit\n", | |
| nr_pages); | |
| return NULL; | |
| } | |
| /* Allocate aux_buffer struct for the event */ | |
| aux = kzalloc_obj(struct aux_buffer); | |
| if (!aux) | |
| goto no_aux; | |
| sfb = &aux->sfb; | |
| /* Allocate sdbt_index for fast reference */ | |
| n_sdbt = DIV_ROUND_UP(nr_pages, CPUM_SF_SDB_PER_TABLE); | |
| aux->sdbt_index = kmalloc_array(n_sdbt, sizeof(void *), GFP_KERNEL); | |
| if (!aux->sdbt_index) | |
| goto no_sdbt_index; | |
| /* Allocate sdb_index for fast reference */ | |
| aux->sdb_index = kmalloc_array(nr_pages, sizeof(void *), GFP_KERNEL); | |
| if (!aux->sdb_index) | |
| goto no_sdb_index; | |
| /* Allocate the first SDBT */ | |
| sfb->num_sdbt = 0; | |
| sfb->sdbt = (unsigned long *)get_zeroed_page(GFP_KERNEL); | |
| if (!sfb->sdbt) | |
| goto no_sdbt; | |
| aux->sdbt_index[sfb->num_sdbt++] = (unsigned long)sfb->sdbt; | |
| tail = sfb->tail = sfb->sdbt; | |
| /* | |
| * Link the provided pages of AUX buffer to SDBT. | |
| * Allocate SDBT if needed. | |
| */ | |
| for (i = 0; i < nr_pages; i++, tail++) { | |
| if (require_table_link(tail)) { | |
| new = (unsigned long *)get_zeroed_page(GFP_KERNEL); | |
| if (!new) | |
| goto no_sdbt; | |
| aux->sdbt_index[sfb->num_sdbt++] = (unsigned long)new; | |
| /* Link current page to tail of chain */ | |
| *tail = virt_to_phys(new) + 1; | |
| tail = new; | |
| } | |
| /* Tail is the entry in a SDBT */ | |
| *tail = virt_to_phys(pages[i]); | |
| aux->sdb_index[i] = (unsigned long)pages[i]; | |
| aux_sdb_init((unsigned long)pages[i]); | |
| } | |
| sfb->num_sdb = nr_pages; | |
| /* Link the last entry in the SDBT to the first SDBT */ | |
| *tail = virt_to_phys(sfb->sdbt) + 1; | |
| sfb->tail = tail; | |
| /* | |
| * Initial all SDBs are zeroed. Mark it as empty. | |
| * So there is no need to clear the full indicator | |
| * when this event is first added. | |
| */ | |
| aux->empty_mark = sfb->num_sdb - 1; | |
| return aux; | |
| no_sdbt: | |
| /* SDBs (AUX buffer pages) are freed by caller */ | |
| for (i = 0; i < sfb->num_sdbt; i++) | |
| free_page(aux->sdbt_index[i]); | |
| kfree(aux->sdb_index); | |
| no_sdb_index: | |
| kfree(aux->sdbt_index); | |
| no_sdbt_index: | |
| kfree(aux); | |
| no_aux: | |
| return NULL; | |
| } | |
| static void cpumsf_pmu_read(struct perf_event *event) | |
| { | |
| /* Nothing to do ... updates are interrupt-driven */ | |
| } | |
| /* Check if the new sampling period/frequency is appropriate. | |
| * | |
| * Return non-zero on error and zero on passed checks. | |
| */ | |
| static int cpumsf_pmu_check_period(struct perf_event *event, u64 value) | |
| { | |
| struct hws_qsi_info_block si; | |
| unsigned long rate; | |
| bool do_freq; | |
| memset(&si, 0, sizeof(si)); | |
| if (event->cpu == -1) { | |
| qsi(&si); | |
| } else { | |
| /* Event is pinned to a particular CPU, retrieve the per-CPU | |
| * sampling structure for accessing the CPU-specific QSI. | |
| */ | |
| struct cpu_hw_sf *cpuhw = &per_cpu(cpu_hw_sf, event->cpu); | |
| si = cpuhw->qsi; | |
| } | |
| do_freq = !!SAMPL_FREQ_MODE(&event->hw); | |
| rate = getrate(do_freq, value, &si); | |
| if (!rate) | |
| return -EINVAL; | |
| event->attr.sample_period = rate; | |
| SAMPL_RATE(&event->hw) = rate; | |
| hw_init_period(&event->hw, SAMPL_RATE(&event->hw)); | |
| return 0; | |
| } | |
| /* Activate sampling control. | |
| * Next call of pmu_enable() starts sampling. | |
| */ | |
| static void cpumsf_pmu_start(struct perf_event *event, int flags) | |
| { | |
| struct cpu_hw_sf *cpuhw = this_cpu_ptr(&cpu_hw_sf); | |
| if (!(event->hw.state & PERF_HES_STOPPED)) | |
| return; | |
| perf_pmu_disable(event->pmu); | |
| event->hw.state = 0; | |
| cpuhw->lsctl.cs = 1; | |
| if (SAMPL_DIAG_MODE(&event->hw)) | |
| cpuhw->lsctl.cd = 1; | |
| perf_pmu_enable(event->pmu); | |
| } | |
| /* Deactivate sampling control. | |
| * Next call of pmu_enable() stops sampling. | |
| */ | |
| static void cpumsf_pmu_stop(struct perf_event *event, int flags) | |
| { | |
| struct cpu_hw_sf *cpuhw = this_cpu_ptr(&cpu_hw_sf); | |
| if (event->hw.state & PERF_HES_STOPPED) | |
| return; | |
| perf_pmu_disable(event->pmu); | |
| cpuhw->lsctl.cs = 0; | |
| cpuhw->lsctl.cd = 0; | |
| event->hw.state |= PERF_HES_STOPPED; | |
| if ((flags & PERF_EF_UPDATE) && !(event->hw.state & PERF_HES_UPTODATE)) { | |
| /* CPU hotplug off removes SDBs. No samples to extract. */ | |
| if (cpuhw->flags & PMU_F_RESERVED) | |
| hw_perf_event_update(event, 1); | |
| event->hw.state |= PERF_HES_UPTODATE; | |
| } | |
| perf_pmu_enable(event->pmu); | |
| } | |
| static int cpumsf_pmu_add(struct perf_event *event, int flags) | |
| { | |
| struct cpu_hw_sf *cpuhw = this_cpu_ptr(&cpu_hw_sf); | |
| struct aux_buffer *aux; | |
| int err = 0; | |
| if (cpuhw->flags & PMU_F_IN_USE) | |
| return -EAGAIN; | |
| if (!SAMPL_DIAG_MODE(&event->hw) && !sf_buffer_available(cpuhw)) | |
| return -EINVAL; | |
| perf_pmu_disable(event->pmu); | |
| event->hw.state = PERF_HES_UPTODATE | PERF_HES_STOPPED; | |
| /* Set up sampling controls. Always program the sampling register | |
| * using the SDB-table start. Reset TEAR_REG event hardware register | |
| * that is used by hw_perf_event_update() to store the sampling buffer | |
| * position after samples have been flushed. | |
| */ | |
| cpuhw->lsctl.s = 0; | |
| cpuhw->lsctl.h = 1; | |
| cpuhw->lsctl.interval = SAMPL_RATE(&event->hw); | |
| if (!SAMPL_DIAG_MODE(&event->hw)) { | |
| cpuhw->lsctl.tear = virt_to_phys(cpuhw->sfb.sdbt); | |
| cpuhw->lsctl.dear = *(unsigned long *)cpuhw->sfb.sdbt; | |
| TEAR_REG(&event->hw) = (unsigned long)cpuhw->sfb.sdbt; | |
| } | |
| /* Ensure sampling functions are in the disabled state. If disabled, | |
| * switch on sampling enable control. */ | |
| if (WARN_ON_ONCE(cpuhw->lsctl.es == 1 || cpuhw->lsctl.ed == 1)) { | |
| err = -EAGAIN; | |
| goto out; | |
| } | |
| if (SAMPL_DIAG_MODE(&event->hw)) { | |
| aux = perf_aux_output_begin(&cpuhw->handle, event); | |
| if (!aux) { | |
| err = -EINVAL; | |
| goto out; | |
| } | |
| err = aux_output_begin(&cpuhw->handle, aux, cpuhw); | |
| if (err) | |
| goto out; | |
| cpuhw->lsctl.ed = 1; | |
| } | |
| cpuhw->lsctl.es = 1; | |
| /* Set in_use flag and store event */ | |
| cpuhw->event = event; | |
| cpuhw->flags |= PMU_F_IN_USE; | |
| if (flags & PERF_EF_START) | |
| cpumsf_pmu_start(event, PERF_EF_RELOAD); | |
| out: | |
| perf_event_update_userpage(event); | |
| perf_pmu_enable(event->pmu); | |
| return err; | |
| } | |
| static void cpumsf_pmu_del(struct perf_event *event, int flags) | |
| { | |
| struct cpu_hw_sf *cpuhw = this_cpu_ptr(&cpu_hw_sf); | |
| perf_pmu_disable(event->pmu); | |
| cpumsf_pmu_stop(event, PERF_EF_UPDATE); | |
| cpuhw->lsctl.es = 0; | |
| cpuhw->lsctl.ed = 0; | |
| cpuhw->flags &= ~PMU_F_IN_USE; | |
| cpuhw->event = NULL; | |
| if (SAMPL_DIAG_MODE(&event->hw)) | |
| aux_output_end(&cpuhw->handle); | |
| perf_event_update_userpage(event); | |
| perf_pmu_enable(event->pmu); | |
| } | |
| CPUMF_EVENT_ATTR(SF, SF_CYCLES_BASIC, PERF_EVENT_CPUM_SF); | |
| CPUMF_EVENT_ATTR(SF, SF_CYCLES_BASIC_DIAG, PERF_EVENT_CPUM_SF_DIAG); | |
| /* Attribute list for CPU_SF. | |
| * | |
| * The availablitiy depends on the CPU_MF sampling facility authorization | |
| * for basic + diagnositic samples. This is determined at initialization | |
| * time by the sampling facility device driver. | |
| * If the authorization for basic samples is turned off, it should be | |
| * also turned off for diagnostic sampling. | |
| * | |
| * During initialization of the device driver, check the authorization | |
| * level for diagnostic sampling and installs the attribute | |
| * file for diagnostic sampling if necessary. | |
| * | |
| * For now install a placeholder to reference all possible attributes: | |
| * SF_CYCLES_BASIC and SF_CYCLES_BASIC_DIAG. | |
| * Add another entry for the final NULL pointer. | |
| */ | |
| enum { | |
| SF_CYCLES_BASIC_ATTR_IDX = 0, | |
| SF_CYCLES_BASIC_DIAG_ATTR_IDX, | |
| SF_CYCLES_ATTR_MAX | |
| }; | |
| static struct attribute *cpumsf_pmu_events_attr[SF_CYCLES_ATTR_MAX + 1] = { | |
| [SF_CYCLES_BASIC_ATTR_IDX] = CPUMF_EVENT_PTR(SF, SF_CYCLES_BASIC) | |
| }; | |
| PMU_FORMAT_ATTR(event, "config:0-63"); | |
| static struct attribute *cpumsf_pmu_format_attr[] = { | |
| &format_attr_event.attr, | |
| NULL, | |
| }; | |
| static struct attribute_group cpumsf_pmu_events_group = { | |
| .name = "events", | |
| .attrs = cpumsf_pmu_events_attr, | |
| }; | |
| static struct attribute_group cpumsf_pmu_format_group = { | |
| .name = "format", | |
| .attrs = cpumsf_pmu_format_attr, | |
| }; | |
| static const struct attribute_group *cpumsf_pmu_attr_groups[] = { | |
| &cpumsf_pmu_events_group, | |
| &cpumsf_pmu_format_group, | |
| NULL, | |
| }; | |
| static struct pmu cpumf_sampling = { | |
| .pmu_enable = cpumsf_pmu_enable, | |
| .pmu_disable = cpumsf_pmu_disable, | |
| .event_init = cpumsf_pmu_event_init, | |
| .add = cpumsf_pmu_add, | |
| .del = cpumsf_pmu_del, | |
| .start = cpumsf_pmu_start, | |
| .stop = cpumsf_pmu_stop, | |
| .read = cpumsf_pmu_read, | |
| .attr_groups = cpumsf_pmu_attr_groups, | |
| .setup_aux = aux_buffer_setup, | |
| .free_aux = aux_buffer_free, | |
| .check_period = cpumsf_pmu_check_period, | |
| }; | |
| static void cpumf_measurement_alert(struct ext_code ext_code, | |
| unsigned int alert, unsigned long unused) | |
| { | |
| struct cpu_hw_sf *cpuhw; | |
| if (!(alert & CPU_MF_INT_SF_MASK)) | |
| return; | |
| inc_irq_stat(IRQEXT_CMS); | |
| cpuhw = this_cpu_ptr(&cpu_hw_sf); | |
| /* Measurement alerts are shared and might happen when the PMU | |
| * is not reserved. Ignore these alerts in this case. */ | |
| if (!(cpuhw->flags & PMU_F_RESERVED)) | |
| return; | |
| /* The processing below must take care of multiple alert events that | |
| * might be indicated concurrently. */ | |
| /* Program alert request */ | |
| if (alert & CPU_MF_INT_SF_PRA) { | |
| if (cpuhw->flags & PMU_F_IN_USE) { | |
| if (SAMPL_DIAG_MODE(&cpuhw->event->hw)) | |
| hw_collect_aux(cpuhw); | |
| else | |
| hw_perf_event_update(cpuhw->event, 0); | |
| } | |
| } | |
| /* Report measurement alerts only for non-PRA codes */ | |
| if (alert != CPU_MF_INT_SF_PRA) | |
| debug_sprintf_event(sfdbg, 6, "%s alert %#x\n", __func__, | |
| alert); | |
| /* Sampling authorization change request */ | |
| if (alert & CPU_MF_INT_SF_SACA) | |
| qsi(&cpuhw->qsi); | |
| /* Loss of sample data due to high-priority machine activities */ | |
| if (alert & CPU_MF_INT_SF_LSDA) { | |
| pr_err("Sample data was lost\n"); | |
| cpuhw->flags |= PMU_F_ERR_LSDA; | |
| sf_disable(); | |
| } | |
| /* Invalid sampling buffer entry */ | |
| if (alert & (CPU_MF_INT_SF_IAE|CPU_MF_INT_SF_ISE)) { | |
| pr_err("A sampling buffer entry is incorrect (alert=%#x)\n", | |
| alert); | |
| cpuhw->flags |= PMU_F_ERR_IBE; | |
| sf_disable(); | |
| } | |
| } | |
| static int cpusf_pmu_setup(unsigned int cpu, int flags) | |
| { | |
| /* Ignore the notification if no events are scheduled on the PMU. | |
| * This might be racy... | |
| */ | |
| if (!refcount_read(&num_events)) | |
| return 0; | |
| local_irq_disable(); | |
| setup_pmc_cpu(&flags); | |
| local_irq_enable(); | |
| return 0; | |
| } | |
| static int s390_pmu_sf_online_cpu(unsigned int cpu) | |
| { | |
| return cpusf_pmu_setup(cpu, PMC_INIT); | |
| } | |
| static int s390_pmu_sf_offline_cpu(unsigned int cpu) | |
| { | |
| return cpusf_pmu_setup(cpu, PMC_RELEASE); | |
| } | |
| static int param_get_sfb_size(char *buffer, const struct kernel_param *kp) | |
| { | |
| if (!cpum_sf_avail()) | |
| return -ENODEV; | |
| return sprintf(buffer, "%lu,%lu", CPUM_SF_MIN_SDB, CPUM_SF_MAX_SDB); | |
| } | |
| static int param_set_sfb_size(const char *val, const struct kernel_param *kp) | |
| { | |
| int rc; | |
| unsigned long min, max; | |
| if (!cpum_sf_avail()) | |
| return -ENODEV; | |
| if (!val || !strlen(val)) | |
| return -EINVAL; | |
| /* Valid parameter values: "min,max" or "max" */ | |
| min = CPUM_SF_MIN_SDB; | |
| max = CPUM_SF_MAX_SDB; | |
| if (strchr(val, ',')) | |
| rc = (sscanf(val, "%lu,%lu", &min, &max) == 2) ? 0 : -EINVAL; | |
| else | |
| rc = kstrtoul(val, 10, &max); | |
| if (min < 2 || min >= max || max > get_num_physpages()) | |
| rc = -EINVAL; | |
| if (rc) | |
| return rc; | |
| sfb_set_limits(min, max); | |
| pr_info("The sampling buffer limits have changed to: " | |
| "min %lu max %lu (diag %lu)\n", | |
| CPUM_SF_MIN_SDB, CPUM_SF_MAX_SDB, CPUM_SF_SDB_DIAG_FACTOR); | |
| return 0; | |
| } | |
| #define param_check_sfb_size(name, p) __param_check(name, p, void) | |
| static const struct kernel_param_ops param_ops_sfb_size = { | |
| .set = param_set_sfb_size, | |
| .get = param_get_sfb_size, | |
| }; | |
| enum { | |
| RS_INIT_FAILURE_BSDES = 2, /* Bad basic sampling size */ | |
| RS_INIT_FAILURE_ALRT = 3, /* IRQ registration failure */ | |
| RS_INIT_FAILURE_PERF = 4 /* PMU registration failure */ | |
| }; | |
| static void __init pr_cpumsf_err(unsigned int reason) | |
| { | |
| pr_err("Sampling facility support for perf is not available: " | |
| "reason %#x\n", reason); | |
| } | |
| static int __init init_cpum_sampling_pmu(void) | |
| { | |
| struct hws_qsi_info_block si; | |
| int err; | |
| if (!cpum_sf_avail()) | |
| return -ENODEV; | |
| memset(&si, 0, sizeof(si)); | |
| qsi(&si); | |
| if (!si.as && !si.ad) | |
| return -ENODEV; | |
| if (si.bsdes != sizeof(struct hws_basic_entry)) { | |
| pr_cpumsf_err(RS_INIT_FAILURE_BSDES); | |
| return -EINVAL; | |
| } | |
| if (si.ad) { | |
| sfb_set_limits(CPUM_SF_MIN_SDB, CPUM_SF_MAX_SDB); | |
| /* Sampling of diagnostic data authorized, | |
| * install event into attribute list of PMU device. | |
| */ | |
| cpumsf_pmu_events_attr[SF_CYCLES_BASIC_DIAG_ATTR_IDX] = | |
| CPUMF_EVENT_PTR(SF, SF_CYCLES_BASIC_DIAG); | |
| } | |
| sfdbg = debug_register("cpum_sf", 2, 1, 80); | |
| if (!sfdbg) { | |
| pr_err("Registering for s390dbf failed\n"); | |
| return -ENOMEM; | |
| } | |
| debug_register_view(sfdbg, &debug_sprintf_view); | |
| err = register_external_irq(EXT_IRQ_MEASURE_ALERT, | |
| cpumf_measurement_alert); | |
| if (err) { | |
| pr_cpumsf_err(RS_INIT_FAILURE_ALRT); | |
| debug_unregister(sfdbg); | |
| goto out; | |
| } | |
| err = perf_pmu_register(&cpumf_sampling, "cpum_sf", PERF_TYPE_RAW); | |
| if (err) { | |
| pr_cpumsf_err(RS_INIT_FAILURE_PERF); | |
| unregister_external_irq(EXT_IRQ_MEASURE_ALERT, | |
| cpumf_measurement_alert); | |
| debug_unregister(sfdbg); | |
| goto out; | |
| } | |
| cpuhp_setup_state(CPUHP_AP_PERF_S390_SF_ONLINE, "perf/s390/sf:online", | |
| s390_pmu_sf_online_cpu, s390_pmu_sf_offline_cpu); | |
| out: | |
| return err; | |
| } | |
| arch_initcall(init_cpum_sampling_pmu); | |
| core_param(cpum_sfb_size, CPUM_SF_MAX_SDB, sfb_size, 0644); |