| /* SPDX-License-Identifier: GPL-2.0 */ | |
| /* | |
| * In-kernel FPU support functions | |
| * | |
| * | |
| * Consider these guidelines before using in-kernel FPU functions: | |
| * | |
| * 1. Use kernel_fpu_begin() and kernel_fpu_end() to enclose all in-kernel | |
| * use of floating-point or vector registers and instructions. | |
| * | |
| * 2. For kernel_fpu_begin(), specify the vector register range you want to | |
| * use with the KERNEL_VXR_* constants. Consider these usage guidelines: | |
| * | |
| * a) If your function typically runs in process-context, use the lower | |
| * half of the vector registers, for example, specify KERNEL_VXR_LOW. | |
| * b) If your function typically runs in soft-irq or hard-irq context, | |
| * prefer using the upper half of the vector registers, for example, | |
| * specify KERNEL_VXR_HIGH. | |
| * | |
| * If you adhere to these guidelines, an interrupted process context | |
| * does not require to save and restore vector registers because of | |
| * disjoint register ranges. | |
| * | |
| * Also note that the __kernel_fpu_begin()/__kernel_fpu_end() functions | |
| * includes logic to save and restore up to 16 vector registers at once. | |
| * | |
| * 3. You can nest kernel_fpu_begin()/kernel_fpu_end() by using different | |
| * struct kernel_fpu states. Vector registers that are in use by outer | |
| * levels are saved and restored. You can minimize the save and restore | |
| * effort by choosing disjoint vector register ranges. | |
| * | |
| * 5. To use vector floating-point instructions, specify the KERNEL_FPC | |
| * flag to save and restore floating-point controls in addition to any | |
| * vector register range. | |
| * | |
| * 6. To use floating-point registers and instructions only, specify the | |
| * KERNEL_FPR flag. This flag triggers a save and restore of vector | |
| * registers V0 to V15 and floating-point controls. | |
| * | |
| * Copyright IBM Corp. 2015 | |
| * Author(s): Hendrik Brueckner <brueckner@linux.vnet.ibm.com> | |
| */ | |
| #ifndef _ASM_S390_FPU_H | |
| #define _ASM_S390_FPU_H | |
| #include <linux/cpufeature.h> | |
| #include <linux/processor.h> | |
| #include <linux/preempt.h> | |
| #include <linux/string.h> | |
| #include <linux/sched.h> | |
| #include <asm/sigcontext.h> | |
| #include <asm/fpu-types.h> | |
| #include <asm/fpu-insn.h> | |
| enum { | |
| KERNEL_FPC_BIT = 0, | |
| KERNEL_VXR_V0V7_BIT, | |
| KERNEL_VXR_V8V15_BIT, | |
| KERNEL_VXR_V16V23_BIT, | |
| KERNEL_VXR_V24V31_BIT, | |
| }; | |
| #define KERNEL_FPC BIT(KERNEL_FPC_BIT) | |
| #define KERNEL_VXR_V0V7 BIT(KERNEL_VXR_V0V7_BIT) | |
| #define KERNEL_VXR_V8V15 BIT(KERNEL_VXR_V8V15_BIT) | |
| #define KERNEL_VXR_V16V23 BIT(KERNEL_VXR_V16V23_BIT) | |
| #define KERNEL_VXR_V24V31 BIT(KERNEL_VXR_V24V31_BIT) | |
| #define KERNEL_VXR_LOW (KERNEL_VXR_V0V7 | KERNEL_VXR_V8V15) | |
| #define KERNEL_VXR_MID (KERNEL_VXR_V8V15 | KERNEL_VXR_V16V23) | |
| #define KERNEL_VXR_HIGH (KERNEL_VXR_V16V23 | KERNEL_VXR_V24V31) | |
| #define KERNEL_VXR (KERNEL_VXR_LOW | KERNEL_VXR_HIGH) | |
| #define KERNEL_FPR (KERNEL_FPC | KERNEL_VXR_LOW) | |
| void load_fpu_state(struct fpu *state, int flags); | |
| void save_fpu_state(struct fpu *state, int flags); | |
| void __kernel_fpu_begin(struct kernel_fpu *state, int flags); | |
| void __kernel_fpu_end(struct kernel_fpu *state, int flags); | |
| static __always_inline void save_vx_regs(__vector128 *vxrs) | |
| { | |
| fpu_vstm(0, 15, &vxrs[0]); | |
| fpu_vstm(16, 31, &vxrs[16]); | |
| } | |
| static __always_inline void load_vx_regs(__vector128 *vxrs) | |
| { | |
| fpu_vlm(0, 15, &vxrs[0]); | |
| fpu_vlm(16, 31, &vxrs[16]); | |
| } | |
| static __always_inline void __save_fp_regs(freg_t *fprs, unsigned int offset) | |
| { | |
| fpu_std(0, &fprs[0 * offset]); | |
| fpu_std(1, &fprs[1 * offset]); | |
| fpu_std(2, &fprs[2 * offset]); | |
| fpu_std(3, &fprs[3 * offset]); | |
| fpu_std(4, &fprs[4 * offset]); | |
| fpu_std(5, &fprs[5 * offset]); | |
| fpu_std(6, &fprs[6 * offset]); | |
| fpu_std(7, &fprs[7 * offset]); | |
| fpu_std(8, &fprs[8 * offset]); | |
| fpu_std(9, &fprs[9 * offset]); | |
| fpu_std(10, &fprs[10 * offset]); | |
| fpu_std(11, &fprs[11 * offset]); | |
| fpu_std(12, &fprs[12 * offset]); | |
| fpu_std(13, &fprs[13 * offset]); | |
| fpu_std(14, &fprs[14 * offset]); | |
| fpu_std(15, &fprs[15 * offset]); | |
| } | |
| static __always_inline void __load_fp_regs(freg_t *fprs, unsigned int offset) | |
| { | |
| fpu_ld(0, &fprs[0 * offset]); | |
| fpu_ld(1, &fprs[1 * offset]); | |
| fpu_ld(2, &fprs[2 * offset]); | |
| fpu_ld(3, &fprs[3 * offset]); | |
| fpu_ld(4, &fprs[4 * offset]); | |
| fpu_ld(5, &fprs[5 * offset]); | |
| fpu_ld(6, &fprs[6 * offset]); | |
| fpu_ld(7, &fprs[7 * offset]); | |
| fpu_ld(8, &fprs[8 * offset]); | |
| fpu_ld(9, &fprs[9 * offset]); | |
| fpu_ld(10, &fprs[10 * offset]); | |
| fpu_ld(11, &fprs[11 * offset]); | |
| fpu_ld(12, &fprs[12 * offset]); | |
| fpu_ld(13, &fprs[13 * offset]); | |
| fpu_ld(14, &fprs[14 * offset]); | |
| fpu_ld(15, &fprs[15 * offset]); | |
| } | |
| static __always_inline void save_fp_regs(freg_t *fprs) | |
| { | |
| __save_fp_regs(fprs, sizeof(freg_t) / sizeof(freg_t)); | |
| } | |
| static __always_inline void load_fp_regs(freg_t *fprs) | |
| { | |
| __load_fp_regs(fprs, sizeof(freg_t) / sizeof(freg_t)); | |
| } | |
| static __always_inline void save_fp_regs_vx(__vector128 *vxrs) | |
| { | |
| freg_t *fprs = (freg_t *)&vxrs[0].high; | |
| __save_fp_regs(fprs, sizeof(__vector128) / sizeof(freg_t)); | |
| } | |
| static __always_inline void load_fp_regs_vx(__vector128 *vxrs) | |
| { | |
| freg_t *fprs = (freg_t *)&vxrs[0].high; | |
| __load_fp_regs(fprs, sizeof(__vector128) / sizeof(freg_t)); | |
| } | |
| static inline void load_user_fpu_regs(void) | |
| { | |
| struct thread_struct *thread = ¤t->thread; | |
| if (!thread->ufpu_flags) | |
| return; | |
| load_fpu_state(&thread->ufpu, thread->ufpu_flags); | |
| thread->ufpu_flags = 0; | |
| } | |
| static __always_inline void __save_user_fpu_regs(struct thread_struct *thread, int flags) | |
| { | |
| save_fpu_state(&thread->ufpu, flags); | |
| __atomic_or(flags, &thread->ufpu_flags); | |
| } | |
| static inline void save_user_fpu_regs(void) | |
| { | |
| struct thread_struct *thread = ¤t->thread; | |
| int mask, flags; | |
| mask = __atomic_or(KERNEL_FPC | KERNEL_VXR, &thread->kfpu_flags); | |
| flags = ~READ_ONCE(thread->ufpu_flags) & (KERNEL_FPC | KERNEL_VXR); | |
| if (flags) | |
| __save_user_fpu_regs(thread, flags); | |
| barrier(); | |
| WRITE_ONCE(thread->kfpu_flags, mask); | |
| } | |
| static __always_inline void _kernel_fpu_begin(struct kernel_fpu *state, int flags) | |
| { | |
| struct thread_struct *thread = ¤t->thread; | |
| int mask, uflags; | |
| mask = __atomic_or(flags, &thread->kfpu_flags); | |
| state->hdr.mask = mask; | |
| uflags = READ_ONCE(thread->ufpu_flags); | |
| if ((uflags & flags) != flags) | |
| __save_user_fpu_regs(thread, ~uflags & flags); | |
| if (mask & flags) | |
| __kernel_fpu_begin(state, flags); | |
| } | |
| static __always_inline void _kernel_fpu_end(struct kernel_fpu *state, int flags) | |
| { | |
| int mask = state->hdr.mask; | |
| if (mask & flags) | |
| __kernel_fpu_end(state, flags); | |
| barrier(); | |
| WRITE_ONCE(current->thread.kfpu_flags, mask); | |
| } | |
| void __kernel_fpu_invalid_size(void); | |
| static __always_inline void kernel_fpu_check_size(int flags, unsigned int size) | |
| { | |
| unsigned int cnt = 0; | |
| if (flags & KERNEL_VXR_V0V7) | |
| cnt += 8; | |
| if (flags & KERNEL_VXR_V8V15) | |
| cnt += 8; | |
| if (flags & KERNEL_VXR_V16V23) | |
| cnt += 8; | |
| if (flags & KERNEL_VXR_V24V31) | |
| cnt += 8; | |
| if (cnt != size) | |
| __kernel_fpu_invalid_size(); | |
| } | |
| #define kernel_fpu_begin(state, flags) \ | |
| { \ | |
| typeof(state) s = (state); \ | |
| int _flags = (flags); \ | |
| \ | |
| kernel_fpu_check_size(_flags, ARRAY_SIZE(s->vxrs)); \ | |
| _kernel_fpu_begin((struct kernel_fpu *)s, _flags); \ | |
| } | |
| #define kernel_fpu_end(state, flags) \ | |
| { \ | |
| typeof(state) s = (state); \ | |
| int _flags = (flags); \ | |
| \ | |
| kernel_fpu_check_size(_flags, ARRAY_SIZE(s->vxrs)); \ | |
| _kernel_fpu_end((struct kernel_fpu *)s, _flags); \ | |
| } | |
| static inline void save_kernel_fpu_regs(struct thread_struct *thread) | |
| { | |
| if (!thread->kfpu_flags) | |
| return; | |
| save_fpu_state(&thread->kfpu, thread->kfpu_flags); | |
| } | |
| static inline void restore_kernel_fpu_regs(struct thread_struct *thread) | |
| { | |
| if (!thread->kfpu_flags) | |
| return; | |
| load_fpu_state(&thread->kfpu, thread->kfpu_flags); | |
| } | |
| static inline void convert_vx_to_fp(freg_t *fprs, __vector128 *vxrs) | |
| { | |
| int i; | |
| for (i = 0; i < __NUM_FPRS; i++) | |
| fprs[i].ui = vxrs[i].high; | |
| } | |
| static inline void convert_fp_to_vx(__vector128 *vxrs, freg_t *fprs) | |
| { | |
| int i; | |
| for (i = 0; i < __NUM_FPRS; i++) | |
| vxrs[i].high = fprs[i].ui; | |
| } | |
| static inline void fpregs_store(_s390_fp_regs *fpregs, struct fpu *fpu) | |
| { | |
| fpregs->pad = 0; | |
| fpregs->fpc = fpu->fpc; | |
| convert_vx_to_fp((freg_t *)&fpregs->fprs, fpu->vxrs); | |
| } | |
| static inline void fpregs_load(_s390_fp_regs *fpregs, struct fpu *fpu) | |
| { | |
| fpu->fpc = fpregs->fpc; | |
| convert_fp_to_vx(fpu->vxrs, (freg_t *)&fpregs->fprs); | |
| } | |
| #endif /* _ASM_S390_FPU_H */ |