| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Common prep/pmac/chrp boot and setup code. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/string.h> | |
| #include <linux/sched.h> | |
| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/reboot.h> | |
| #include <linux/delay.h> | |
| #include <linux/initrd.h> | |
| #include <linux/tty.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/root_dev.h> | |
| #include <linux/cpu.h> | |
| #include <linux/console.h> | |
| #include <linux/memblock.h> | |
| #include <linux/export.h> | |
| #include <linux/nvram.h> | |
| #include <linux/pgtable.h> | |
| #include <linux/of_fdt.h> | |
| #include <linux/irq.h> | |
| #include <asm/io.h> | |
| #include <asm/processor.h> | |
| #include <asm/setup.h> | |
| #include <asm/smp.h> | |
| #include <asm/elf.h> | |
| #include <asm/cputable.h> | |
| #include <asm/bootx.h> | |
| #include <asm/btext.h> | |
| #include <asm/machdep.h> | |
| #include <linux/uaccess.h> | |
| #include <asm/pmac_feature.h> | |
| #include <asm/sections.h> | |
| #include <asm/nvram.h> | |
| #include <asm/xmon.h> | |
| #include <asm/time.h> | |
| #include <asm/serial.h> | |
| #include <asm/udbg.h> | |
| #include <asm/text-patching.h> | |
| #include <asm/cpu_has_feature.h> | |
| #include <asm/asm-prototypes.h> | |
| #include <asm/kdump.h> | |
| #include <asm/feature-fixups.h> | |
| #include <asm/early_ioremap.h> | |
| #include "setup.h" | |
| #define DBG(fmt...) | |
| extern void bootx_init(unsigned long r4, unsigned long phys); | |
| int boot_cpuid_phys; | |
| EXPORT_SYMBOL_GPL(boot_cpuid_phys); | |
| int smp_hw_index[NR_CPUS]; | |
| EXPORT_SYMBOL(smp_hw_index); | |
| unsigned int DMA_MODE_READ; | |
| unsigned int DMA_MODE_WRITE; | |
| EXPORT_SYMBOL(DMA_MODE_READ); | |
| EXPORT_SYMBOL(DMA_MODE_WRITE); | |
| /* | |
| * This is run before start_kernel(), the kernel has been relocated | |
| * and we are running with enough of the MMU enabled to have our | |
| * proper kernel virtual addresses | |
| * | |
| * We do the initial parsing of the flat device-tree and prepares | |
| * for the MMU to be fully initialized. | |
| */ | |
| notrace void __init machine_init(u64 dt_ptr) | |
| { | |
| u32 *addr = (u32 *)patch_site_addr(&patch__memset_nocache); | |
| ppc_inst_t insn; | |
| /* Configure static keys first, now that we're relocated. */ | |
| setup_feature_keys(); | |
| early_ioremap_init(); | |
| /* Enable early debugging if any specified (see udbg.h) */ | |
| udbg_early_init(); | |
| patch_instruction_site(&patch__memcpy_nocache, ppc_inst(PPC_RAW_NOP())); | |
| create_cond_branch(&insn, addr, branch_target(addr), 0x820000); | |
| patch_instruction(addr, insn); /* replace b by bne cr0 */ | |
| /* Do some early initialization based on the flat device tree */ | |
| early_init_devtree(__va(dt_ptr)); | |
| early_init_mmu(); | |
| setup_kdump_trampoline(); | |
| } | |
| /* Checks "l2cr=xxxx" command-line option */ | |
| static int __init ppc_setup_l2cr(char *str) | |
| { | |
| if (cpu_has_feature(CPU_FTR_L2CR)) { | |
| unsigned long val = simple_strtoul(str, NULL, 0); | |
| printk(KERN_INFO "l2cr set to %lx\n", val); | |
| _set_L2CR(0); /* force invalidate by disable cache */ | |
| _set_L2CR(val); /* and enable it */ | |
| } | |
| return 1; | |
| } | |
| __setup("l2cr=", ppc_setup_l2cr); | |
| /* Checks "l3cr=xxxx" command-line option */ | |
| static int __init ppc_setup_l3cr(char *str) | |
| { | |
| if (cpu_has_feature(CPU_FTR_L3CR)) { | |
| unsigned long val = simple_strtoul(str, NULL, 0); | |
| printk(KERN_INFO "l3cr set to %lx\n", val); | |
| _set_L3CR(val); /* and enable it */ | |
| } | |
| return 1; | |
| } | |
| __setup("l3cr=", ppc_setup_l3cr); | |
| static int __init ppc_init(void) | |
| { | |
| /* clear the progress line */ | |
| if (ppc_md.progress) | |
| ppc_md.progress(" ", 0xffff); | |
| /* call platform init */ | |
| if (ppc_md.init != NULL) { | |
| ppc_md.init(); | |
| } | |
| return 0; | |
| } | |
| arch_initcall(ppc_init); | |
| static void *__init alloc_stack(void) | |
| { | |
| return memblock_alloc_or_panic(THREAD_SIZE, THREAD_ALIGN); | |
| } | |
| void __init irqstack_early_init(void) | |
| { | |
| unsigned int i; | |
| if (IS_ENABLED(CONFIG_VMAP_STACK)) | |
| return; | |
| /* interrupt stacks must be in lowmem, we get that for free on ppc32 | |
| * as the memblock is limited to lowmem by default */ | |
| for_each_possible_cpu(i) { | |
| softirq_ctx[i] = alloc_stack(); | |
| hardirq_ctx[i] = alloc_stack(); | |
| } | |
| } | |
| #ifdef CONFIG_VMAP_STACK | |
| void *emergency_ctx[NR_CPUS] __ro_after_init = {[0] = &init_stack}; | |
| void __init emergency_stack_init(void) | |
| { | |
| unsigned int i; | |
| for_each_possible_cpu(i) | |
| emergency_ctx[i] = alloc_stack(); | |
| } | |
| #endif | |
| #ifdef CONFIG_BOOKE | |
| void __init exc_lvl_early_init(void) | |
| { | |
| unsigned int i, hw_cpu; | |
| /* interrupt stacks must be in lowmem, we get that for free on ppc32 | |
| * as the memblock is limited to lowmem by MEMBLOCK_REAL_LIMIT */ | |
| for_each_possible_cpu(i) { | |
| #ifdef CONFIG_SMP | |
| hw_cpu = get_hard_smp_processor_id(i); | |
| #else | |
| hw_cpu = 0; | |
| #endif | |
| critirq_ctx[hw_cpu] = alloc_stack(); | |
| #ifdef CONFIG_BOOKE | |
| dbgirq_ctx[hw_cpu] = alloc_stack(); | |
| mcheckirq_ctx[hw_cpu] = alloc_stack(); | |
| #endif | |
| } | |
| } | |
| #endif | |
| void __init setup_power_save(void) | |
| { | |
| #ifdef CONFIG_PPC_BOOK3S_32 | |
| if (cpu_has_feature(CPU_FTR_CAN_DOZE) || | |
| cpu_has_feature(CPU_FTR_CAN_NAP)) | |
| ppc_md.power_save = ppc6xx_idle; | |
| #endif | |
| #ifdef CONFIG_PPC_E500 | |
| if (cpu_has_feature(CPU_FTR_CAN_DOZE) || | |
| cpu_has_feature(CPU_FTR_CAN_NAP)) | |
| ppc_md.power_save = e500_idle; | |
| #endif | |
| } | |
| __init void initialize_cache_info(void) | |
| { | |
| /* | |
| * Set cache line size based on type of cpu as a default. | |
| * Systems with OF can look in the properties on the cpu node(s) | |
| * for a possibly more accurate value. | |
| */ | |
| dcache_bsize = cur_cpu_spec->dcache_bsize; | |
| icache_bsize = cur_cpu_spec->icache_bsize; | |
| } |