| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Copyright (C) 2012,2013 - ARM Ltd | |
| * Author: Marc Zyngier <marc.zyngier@arm.com> | |
| * | |
| * Derived from arch/arm/kvm/reset.c | |
| * Copyright (C) 2012 - Virtual Open Systems and Columbia University | |
| * Author: Christoffer Dall <c.dall@virtualopensystems.com> | |
| */ | |
| #include <linux/errno.h> | |
| #include <linux/kernel.h> | |
| #include <linux/kvm_host.h> | |
| #include <linux/kvm.h> | |
| #include <linux/hw_breakpoint.h> | |
| #include <linux/slab.h> | |
| #include <linux/string.h> | |
| #include <linux/types.h> | |
| #include <kvm/arm_arch_timer.h> | |
| #include <asm/cpufeature.h> | |
| #include <asm/cputype.h> | |
| #include <asm/fpsimd.h> | |
| #include <asm/ptrace.h> | |
| #include <asm/kvm_arm.h> | |
| #include <asm/kvm_asm.h> | |
| #include <asm/kvm_emulate.h> | |
| #include <asm/kvm_mmu.h> | |
| #include <asm/kvm_nested.h> | |
| #include <asm/virt.h> | |
| /* Maximum phys_shift supported for any VM on this host */ | |
| static u32 __ro_after_init kvm_ipa_limit; | |
| unsigned int __ro_after_init kvm_host_sve_max_vl; | |
| unsigned int __ro_after_init kvm_sve_max_vl; | |
| int __init kvm_arm_init_sve(void) | |
| { | |
| if (system_supports_sve()) { | |
| kvm_sve_max_vl = sve_max_virtualisable_vl(); | |
| kvm_host_sve_max_vl = sve_max_vl(); | |
| kvm_nvhe_sym(kvm_host_sve_max_vl) = kvm_host_sve_max_vl; | |
| /* | |
| * The get_sve_reg()/set_sve_reg() ioctl interface will need | |
| * to be extended with multiple register slice support in | |
| * order to support vector lengths greater than | |
| * VL_ARCH_MAX: | |
| */ | |
| if (WARN_ON(kvm_sve_max_vl > VL_ARCH_MAX)) | |
| kvm_sve_max_vl = VL_ARCH_MAX; | |
| /* | |
| * Don't even try to make use of vector lengths that | |
| * aren't available on all CPUs, for now: | |
| */ | |
| if (kvm_sve_max_vl < sve_max_vl()) | |
| pr_warn("KVM: SVE vector length for guests limited to %u bytes\n", | |
| kvm_sve_max_vl); | |
| } | |
| return 0; | |
| } | |
| static void kvm_vcpu_enable_sve(struct kvm_vcpu *vcpu) | |
| { | |
| vcpu->arch.sve_max_vl = kvm_sve_max_vl; | |
| /* | |
| * Userspace can still customize the vector lengths by writing | |
| * KVM_REG_ARM64_SVE_VLS. Allocation is deferred until | |
| * kvm_arm_vcpu_finalize(), which freezes the configuration. | |
| */ | |
| set_bit(KVM_ARCH_FLAG_GUEST_HAS_SVE, &vcpu->kvm->arch.flags); | |
| } | |
| /* | |
| * Finalize vcpu's maximum SVE vector length, allocating | |
| * vcpu->arch.sve_state as necessary. | |
| */ | |
| static int kvm_vcpu_finalize_sve(struct kvm_vcpu *vcpu) | |
| { | |
| void *buf; | |
| unsigned int vl; | |
| size_t reg_sz; | |
| int ret; | |
| vl = vcpu->arch.sve_max_vl; | |
| /* | |
| * Responsibility for these properties is shared between | |
| * kvm_arm_init_sve(), kvm_vcpu_enable_sve() and | |
| * set_sve_vls(). Double-check here just to be sure: | |
| */ | |
| if (WARN_ON(!sve_vl_valid(vl) || vl > sve_max_virtualisable_vl() || | |
| vl > VL_ARCH_MAX)) | |
| return -EIO; | |
| reg_sz = vcpu_sve_state_size(vcpu); | |
| buf = kzalloc(reg_sz, GFP_KERNEL_ACCOUNT); | |
| if (!buf) | |
| return -ENOMEM; | |
| ret = kvm_share_hyp(buf, buf + reg_sz); | |
| if (ret) { | |
| kfree(buf); | |
| return ret; | |
| } | |
| vcpu->arch.sve_state = buf; | |
| vcpu_set_flag(vcpu, VCPU_SVE_FINALIZED); | |
| return 0; | |
| } | |
| int kvm_arm_vcpu_finalize(struct kvm_vcpu *vcpu, int feature) | |
| { | |
| switch (feature) { | |
| case KVM_ARM_VCPU_SVE: | |
| if (!vcpu_has_sve(vcpu)) | |
| return -EINVAL; | |
| if (kvm_arm_vcpu_sve_finalized(vcpu)) | |
| return -EPERM; | |
| return kvm_vcpu_finalize_sve(vcpu); | |
| } | |
| return -EINVAL; | |
| } | |
| bool kvm_arm_vcpu_is_finalized(struct kvm_vcpu *vcpu) | |
| { | |
| if (vcpu_has_sve(vcpu) && !kvm_arm_vcpu_sve_finalized(vcpu)) | |
| return false; | |
| return true; | |
| } | |
| void kvm_arm_vcpu_destroy(struct kvm_vcpu *vcpu) | |
| { | |
| void *sve_state = vcpu->arch.sve_state; | |
| kvm_unshare_hyp(vcpu, vcpu + 1); | |
| if (sve_state) | |
| kvm_unshare_hyp(sve_state, sve_state + vcpu_sve_state_size(vcpu)); | |
| kfree(sve_state); | |
| free_page((unsigned long)vcpu->arch.ctxt.vncr_array); | |
| kfree(vcpu->arch.vncr_tlb); | |
| kfree(vcpu->arch.ccsidr); | |
| } | |
| static void kvm_vcpu_reset_sve(struct kvm_vcpu *vcpu) | |
| { | |
| if (vcpu_has_sve(vcpu)) | |
| memset(vcpu->arch.sve_state, 0, vcpu_sve_state_size(vcpu)); | |
| } | |
| /** | |
| * kvm_reset_vcpu - sets core registers and sys_regs to reset value | |
| * @vcpu: The VCPU pointer | |
| * | |
| * This function sets the registers on the virtual CPU struct to their | |
| * architecturally defined reset values, except for registers whose reset is | |
| * deferred until kvm_arm_vcpu_finalize(). | |
| * | |
| * Note: This function can be called from two paths: The KVM_ARM_VCPU_INIT | |
| * ioctl or as part of handling a request issued by another VCPU in the PSCI | |
| * handling code. In the first case, the VCPU will not be loaded, and in the | |
| * second case the VCPU will be loaded. Because this function operates purely | |
| * on the memory-backed values of system registers, we want to do a full put if | |
| * we were loaded (handling a request) and load the values back at the end of | |
| * the function. Otherwise we leave the state alone. In both cases, we | |
| * disable preemption around the vcpu reset as we would otherwise race with | |
| * preempt notifiers which also call put/load. | |
| */ | |
| void kvm_reset_vcpu(struct kvm_vcpu *vcpu) | |
| { | |
| struct vcpu_reset_state reset_state; | |
| bool loaded; | |
| spin_lock(&vcpu->arch.mp_state_lock); | |
| reset_state = vcpu->arch.reset_state; | |
| vcpu->arch.reset_state.reset = false; | |
| spin_unlock(&vcpu->arch.mp_state_lock); | |
| preempt_disable(); | |
| loaded = (vcpu->cpu != -1); | |
| if (loaded) | |
| kvm_arch_vcpu_put(vcpu); | |
| if (!kvm_arm_vcpu_sve_finalized(vcpu)) { | |
| if (vcpu_has_feature(vcpu, KVM_ARM_VCPU_SVE)) | |
| kvm_vcpu_enable_sve(vcpu); | |
| } else { | |
| kvm_vcpu_reset_sve(vcpu); | |
| } | |
| /* Reset core registers */ | |
| kvm_reset_vcpu_core(vcpu); | |
| /* Reset system registers */ | |
| kvm_reset_sys_regs(vcpu); | |
| /* | |
| * Additional reset state handling that PSCI may have imposed on us. | |
| * Must be done after all the sys_reg reset. | |
| */ | |
| if (reset_state.reset) | |
| kvm_reset_vcpu_psci(vcpu, &reset_state); | |
| /* Reset timer */ | |
| kvm_timer_vcpu_reset(vcpu); | |
| if (loaded) | |
| kvm_arch_vcpu_load(vcpu, smp_processor_id()); | |
| preempt_enable(); | |
| } | |
| u32 kvm_get_pa_bits(struct kvm *kvm) | |
| { | |
| /* Fixed limit until we can configure ID_AA64MMFR0.PARange */ | |
| return kvm_ipa_limit; | |
| } | |
| u32 get_kvm_ipa_limit(void) | |
| { | |
| return kvm_ipa_limit; | |
| } | |
| int __init kvm_set_ipa_limit(void) | |
| { | |
| unsigned int parange; | |
| u64 mmfr0; | |
| mmfr0 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1); | |
| parange = cpuid_feature_extract_unsigned_field(mmfr0, | |
| ID_AA64MMFR0_EL1_PARANGE_SHIFT); | |
| /* | |
| * IPA size beyond 48 bits for 4K and 16K page size is only supported | |
| * when LPA2 is available. So if we have LPA2, enable it, else cap to 48 | |
| * bits, in case it's reported as larger on the system. | |
| */ | |
| if (!kvm_lpa2_is_enabled() && PAGE_SIZE != SZ_64K) | |
| parange = min(parange, (unsigned int)ID_AA64MMFR0_EL1_PARANGE_48); | |
| /* | |
| * Check with ARMv8.5-GTG that our PAGE_SIZE is supported at | |
| * Stage-2. If not, things will stop very quickly. | |
| */ | |
| switch (cpuid_feature_extract_unsigned_field(mmfr0, ID_AA64MMFR0_EL1_TGRAN_2_SHIFT)) { | |
| case ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_NONE: | |
| kvm_err("PAGE_SIZE not supported at Stage-2, giving up\n"); | |
| return -EINVAL; | |
| case ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_DEFAULT: | |
| kvm_debug("PAGE_SIZE supported at Stage-2 (default)\n"); | |
| break; | |
| case ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_MIN ... ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_MAX: | |
| kvm_debug("PAGE_SIZE supported at Stage-2 (advertised)\n"); | |
| break; | |
| default: | |
| kvm_err("Unsupported value for TGRAN_2, giving up\n"); | |
| return -EINVAL; | |
| } | |
| kvm_ipa_limit = id_aa64mmfr0_parange_to_phys_shift(parange); | |
| kvm_info("IPA Size Limit: %d bits%s\n", kvm_ipa_limit, | |
| ((kvm_ipa_limit < KVM_PHYS_SHIFT) ? | |
| " (Reduced IPA size, limited VM/VMM compatibility)" : "")); | |
| return 0; | |
| } |