| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Copyright (C) 2012 ARM Ltd. | |
| * Author: Marc Zyngier <marc.zyngier@arm.com> | |
| */ | |
| #include <linux/cpu.h> | |
| #include <linux/kvm.h> | |
| #include <linux/kvm_host.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/irq.h> | |
| #include <linux/irqdomain.h> | |
| #include <linux/uaccess.h> | |
| #include <clocksource/arm_arch_timer.h> | |
| #include <asm/arch_timer.h> | |
| #include <asm/kvm_emulate.h> | |
| #include <asm/kvm_hyp.h> | |
| #include <asm/kvm_nested.h> | |
| #include <kvm/arm_vgic.h> | |
| #include <kvm/arm_arch_timer.h> | |
| #include "trace.h" | |
| static struct timecounter *timecounter; | |
| static unsigned int host_vtimer_irq; | |
| static unsigned int host_ptimer_irq; | |
| static u32 host_vtimer_irq_flags; | |
| static u32 host_ptimer_irq_flags; | |
| static DEFINE_STATIC_KEY_FALSE(has_gic_active_state); | |
| DEFINE_STATIC_KEY_FALSE(broken_cntvoff_key); | |
| static const u8 default_ppi[] = { | |
| [TIMER_PTIMER] = 30, | |
| [TIMER_VTIMER] = 27, | |
| [TIMER_HPTIMER] = 26, | |
| [TIMER_HVTIMER] = 28, | |
| }; | |
| static void kvm_timer_update_irq(struct kvm_vcpu *vcpu, bool new_level, | |
| struct arch_timer_context *timer_ctx); | |
| static bool kvm_timer_pending(struct arch_timer_context *timer_ctx); | |
| static void kvm_arm_timer_write(struct kvm_vcpu *vcpu, | |
| struct arch_timer_context *timer, | |
| enum kvm_arch_timer_regs treg, | |
| u64 val); | |
| static u64 kvm_arm_timer_read(struct kvm_vcpu *vcpu, | |
| struct arch_timer_context *timer, | |
| enum kvm_arch_timer_regs treg); | |
| static bool kvm_arch_timer_get_input_level(int vintid); | |
| static unsigned long kvm_arch_timer_get_irq_flags(void) | |
| { | |
| return kvm_vgic_global_state.no_hw_deactivation ? VGIC_IRQ_SW_RESAMPLE : 0; | |
| } | |
| static const struct irq_ops arch_timer_irq_ops = { | |
| .get_flags = kvm_arch_timer_get_irq_flags, | |
| .get_input_level = kvm_arch_timer_get_input_level, | |
| }; | |
| static const struct irq_ops arch_timer_irq_ops_vgic_v5 = { | |
| .get_input_level = kvm_arch_timer_get_input_level, | |
| .queue_irq_unlock = vgic_v5_ppi_queue_irq_unlock, | |
| .set_direct_injection = vgic_v5_set_ppi_dvi, | |
| }; | |
| static int nr_timers(struct kvm_vcpu *vcpu) | |
| { | |
| if (!vcpu_has_nv(vcpu)) | |
| return NR_KVM_EL0_TIMERS; | |
| return NR_KVM_TIMERS; | |
| } | |
| u32 timer_get_ctl(struct arch_timer_context *ctxt) | |
| { | |
| struct kvm_vcpu *vcpu = timer_context_to_vcpu(ctxt); | |
| switch(arch_timer_ctx_index(ctxt)) { | |
| case TIMER_VTIMER: | |
| return __vcpu_sys_reg(vcpu, CNTV_CTL_EL0); | |
| case TIMER_PTIMER: | |
| return __vcpu_sys_reg(vcpu, CNTP_CTL_EL0); | |
| case TIMER_HVTIMER: | |
| return __vcpu_sys_reg(vcpu, CNTHV_CTL_EL2); | |
| case TIMER_HPTIMER: | |
| return __vcpu_sys_reg(vcpu, CNTHP_CTL_EL2); | |
| default: | |
| WARN_ON(1); | |
| return 0; | |
| } | |
| } | |
| u64 timer_get_cval(struct arch_timer_context *ctxt) | |
| { | |
| struct kvm_vcpu *vcpu = timer_context_to_vcpu(ctxt); | |
| switch(arch_timer_ctx_index(ctxt)) { | |
| case TIMER_VTIMER: | |
| return __vcpu_sys_reg(vcpu, CNTV_CVAL_EL0); | |
| case TIMER_PTIMER: | |
| return __vcpu_sys_reg(vcpu, CNTP_CVAL_EL0); | |
| case TIMER_HVTIMER: | |
| return __vcpu_sys_reg(vcpu, CNTHV_CVAL_EL2); | |
| case TIMER_HPTIMER: | |
| return __vcpu_sys_reg(vcpu, CNTHP_CVAL_EL2); | |
| default: | |
| WARN_ON(1); | |
| return 0; | |
| } | |
| } | |
| static void timer_set_ctl(struct arch_timer_context *ctxt, u32 ctl) | |
| { | |
| struct kvm_vcpu *vcpu = timer_context_to_vcpu(ctxt); | |
| switch(arch_timer_ctx_index(ctxt)) { | |
| case TIMER_VTIMER: | |
| __vcpu_assign_sys_reg(vcpu, CNTV_CTL_EL0, ctl); | |
| break; | |
| case TIMER_PTIMER: | |
| __vcpu_assign_sys_reg(vcpu, CNTP_CTL_EL0, ctl); | |
| break; | |
| case TIMER_HVTIMER: | |
| __vcpu_assign_sys_reg(vcpu, CNTHV_CTL_EL2, ctl); | |
| break; | |
| case TIMER_HPTIMER: | |
| __vcpu_assign_sys_reg(vcpu, CNTHP_CTL_EL2, ctl); | |
| break; | |
| default: | |
| WARN_ON(1); | |
| } | |
| } | |
| static void timer_set_cval(struct arch_timer_context *ctxt, u64 cval) | |
| { | |
| struct kvm_vcpu *vcpu = timer_context_to_vcpu(ctxt); | |
| switch(arch_timer_ctx_index(ctxt)) { | |
| case TIMER_VTIMER: | |
| __vcpu_assign_sys_reg(vcpu, CNTV_CVAL_EL0, cval); | |
| break; | |
| case TIMER_PTIMER: | |
| __vcpu_assign_sys_reg(vcpu, CNTP_CVAL_EL0, cval); | |
| break; | |
| case TIMER_HVTIMER: | |
| __vcpu_assign_sys_reg(vcpu, CNTHV_CVAL_EL2, cval); | |
| break; | |
| case TIMER_HPTIMER: | |
| __vcpu_assign_sys_reg(vcpu, CNTHP_CVAL_EL2, cval); | |
| break; | |
| default: | |
| WARN_ON(1); | |
| } | |
| } | |
| u64 kvm_phys_timer_read(void) | |
| { | |
| return timecounter->cc->read(timecounter->cc); | |
| } | |
| void get_timer_map(struct kvm_vcpu *vcpu, struct timer_map *map) | |
| { | |
| if (vcpu_has_nv(vcpu)) { | |
| if (is_hyp_ctxt(vcpu)) { | |
| map->direct_vtimer = vcpu_hvtimer(vcpu); | |
| map->direct_ptimer = vcpu_hptimer(vcpu); | |
| map->emul_vtimer = vcpu_vtimer(vcpu); | |
| map->emul_ptimer = vcpu_ptimer(vcpu); | |
| } else { | |
| map->direct_vtimer = vcpu_vtimer(vcpu); | |
| map->direct_ptimer = vcpu_ptimer(vcpu); | |
| map->emul_vtimer = vcpu_hvtimer(vcpu); | |
| map->emul_ptimer = vcpu_hptimer(vcpu); | |
| } | |
| } else if (has_vhe()) { | |
| map->direct_vtimer = vcpu_vtimer(vcpu); | |
| map->direct_ptimer = vcpu_ptimer(vcpu); | |
| map->emul_vtimer = NULL; | |
| map->emul_ptimer = NULL; | |
| } else { | |
| map->direct_vtimer = vcpu_vtimer(vcpu); | |
| map->direct_ptimer = NULL; | |
| map->emul_vtimer = NULL; | |
| map->emul_ptimer = vcpu_ptimer(vcpu); | |
| } | |
| trace_kvm_get_timer_map(vcpu->vcpu_id, map); | |
| } | |
| static inline bool userspace_irqchip(struct kvm *kvm) | |
| { | |
| return unlikely(!irqchip_in_kernel(kvm)); | |
| } | |
| static void soft_timer_start(struct hrtimer *hrt, u64 ns) | |
| { | |
| hrtimer_start(hrt, ktime_add_ns(ktime_get(), ns), | |
| HRTIMER_MODE_ABS_HARD); | |
| } | |
| static void soft_timer_cancel(struct hrtimer *hrt) | |
| { | |
| hrtimer_cancel(hrt); | |
| } | |
| static irqreturn_t kvm_arch_timer_handler(int irq, void *dev_id) | |
| { | |
| struct kvm_vcpu *vcpu = *(struct kvm_vcpu **)dev_id; | |
| struct arch_timer_context *ctx; | |
| struct timer_map map; | |
| /* | |
| * We may see a timer interrupt after vcpu_put() has been called which | |
| * sets the CPU's vcpu pointer to NULL, because even though the timer | |
| * has been disabled in timer_save_state(), the hardware interrupt | |
| * signal may not have been retired from the interrupt controller yet. | |
| */ | |
| if (!vcpu) | |
| return IRQ_HANDLED; | |
| get_timer_map(vcpu, &map); | |
| if (irq == host_vtimer_irq) | |
| ctx = map.direct_vtimer; | |
| else | |
| ctx = map.direct_ptimer; | |
| if (kvm_timer_pending(ctx)) | |
| kvm_timer_update_irq(vcpu, true, ctx); | |
| if (userspace_irqchip(vcpu->kvm) && | |
| !static_branch_unlikely(&has_gic_active_state)) | |
| disable_percpu_irq(host_vtimer_irq); | |
| return IRQ_HANDLED; | |
| } | |
| static u64 kvm_counter_compute_delta(struct arch_timer_context *timer_ctx, | |
| u64 val) | |
| { | |
| u64 now = kvm_phys_timer_read() - timer_get_offset(timer_ctx); | |
| if (now < val) { | |
| u64 ns; | |
| ns = cyclecounter_cyc2ns(timecounter->cc, | |
| val - now, | |
| timecounter->mask, | |
| &timer_ctx->ns_frac); | |
| return ns; | |
| } | |
| return 0; | |
| } | |
| static u64 kvm_timer_compute_delta(struct arch_timer_context *timer_ctx) | |
| { | |
| return kvm_counter_compute_delta(timer_ctx, timer_get_cval(timer_ctx)); | |
| } | |
| static bool kvm_timer_enabled(struct arch_timer_context *timer_ctx) | |
| { | |
| WARN_ON(timer_ctx && timer_ctx->loaded); | |
| return timer_ctx && | |
| ((timer_get_ctl(timer_ctx) & | |
| (ARCH_TIMER_CTRL_IT_MASK | ARCH_TIMER_CTRL_ENABLE)) == ARCH_TIMER_CTRL_ENABLE); | |
| } | |
| static bool vcpu_has_wfit_active(struct kvm_vcpu *vcpu) | |
| { | |
| return (cpus_have_final_cap(ARM64_HAS_WFXT) && | |
| vcpu_get_flag(vcpu, IN_WFIT)); | |
| } | |
| static u64 wfit_delay_ns(struct kvm_vcpu *vcpu) | |
| { | |
| u64 val = vcpu_get_reg(vcpu, kvm_vcpu_sys_get_rt(vcpu)); | |
| struct arch_timer_context *ctx; | |
| ctx = is_hyp_ctxt(vcpu) ? vcpu_hvtimer(vcpu) : vcpu_vtimer(vcpu); | |
| return kvm_counter_compute_delta(ctx, val); | |
| } | |
| /* | |
| * Returns the earliest expiration time in ns among guest timers. | |
| * Note that it will return 0 if none of timers can fire. | |
| */ | |
| static u64 kvm_timer_earliest_exp(struct kvm_vcpu *vcpu) | |
| { | |
| u64 min_delta = ULLONG_MAX; | |
| int i; | |
| for (i = 0; i < nr_timers(vcpu); i++) { | |
| struct arch_timer_context *ctx = &vcpu->arch.timer_cpu.timers[i]; | |
| WARN(ctx->loaded, "timer %d loaded\n", i); | |
| if (kvm_timer_enabled(ctx)) | |
| min_delta = min(min_delta, kvm_timer_compute_delta(ctx)); | |
| } | |
| if (vcpu_has_wfit_active(vcpu)) | |
| min_delta = min(min_delta, wfit_delay_ns(vcpu)); | |
| /* If none of timers can fire, then return 0 */ | |
| if (min_delta == ULLONG_MAX) | |
| return 0; | |
| return min_delta; | |
| } | |
| static enum hrtimer_restart kvm_bg_timer_expire(struct hrtimer *hrt) | |
| { | |
| struct arch_timer_cpu *timer; | |
| struct kvm_vcpu *vcpu; | |
| u64 ns; | |
| timer = container_of(hrt, struct arch_timer_cpu, bg_timer); | |
| vcpu = container_of(timer, struct kvm_vcpu, arch.timer_cpu); | |
| /* | |
| * Check that the timer has really expired from the guest's | |
| * PoV (NTP on the host may have forced it to expire | |
| * early). If we should have slept longer, restart it. | |
| */ | |
| ns = kvm_timer_earliest_exp(vcpu); | |
| if (unlikely(ns)) { | |
| hrtimer_forward_now(hrt, ns_to_ktime(ns)); | |
| return HRTIMER_RESTART; | |
| } | |
| kvm_vcpu_wake_up(vcpu); | |
| return HRTIMER_NORESTART; | |
| } | |
| static enum hrtimer_restart kvm_hrtimer_expire(struct hrtimer *hrt) | |
| { | |
| struct arch_timer_context *ctx; | |
| struct kvm_vcpu *vcpu; | |
| u64 ns; | |
| ctx = container_of(hrt, struct arch_timer_context, hrtimer); | |
| vcpu = timer_context_to_vcpu(ctx); | |
| trace_kvm_timer_hrtimer_expire(ctx); | |
| /* | |
| * Check that the timer has really expired from the guest's | |
| * PoV (NTP on the host may have forced it to expire | |
| * early). If not ready, schedule for a later time. | |
| */ | |
| ns = kvm_timer_compute_delta(ctx); | |
| if (unlikely(ns)) { | |
| hrtimer_forward_now(hrt, ns_to_ktime(ns)); | |
| return HRTIMER_RESTART; | |
| } | |
| kvm_timer_update_irq(vcpu, true, ctx); | |
| return HRTIMER_NORESTART; | |
| } | |
| static bool kvm_timer_pending(struct arch_timer_context *timer_ctx) | |
| { | |
| enum kvm_arch_timers index; | |
| u64 cval, now; | |
| if (!timer_ctx) | |
| return false; | |
| index = arch_timer_ctx_index(timer_ctx); | |
| if (timer_ctx->loaded) { | |
| u32 cnt_ctl = 0; | |
| switch (index) { | |
| case TIMER_VTIMER: | |
| case TIMER_HVTIMER: | |
| cnt_ctl = read_sysreg_el0(SYS_CNTV_CTL); | |
| break; | |
| case TIMER_PTIMER: | |
| case TIMER_HPTIMER: | |
| cnt_ctl = read_sysreg_el0(SYS_CNTP_CTL); | |
| break; | |
| case NR_KVM_TIMERS: | |
| /* GCC is braindead */ | |
| cnt_ctl = 0; | |
| break; | |
| } | |
| return (cnt_ctl & ARCH_TIMER_CTRL_ENABLE) && | |
| (cnt_ctl & ARCH_TIMER_CTRL_IT_STAT) && | |
| !(cnt_ctl & ARCH_TIMER_CTRL_IT_MASK); | |
| } | |
| if (!kvm_timer_enabled(timer_ctx)) | |
| return false; | |
| cval = timer_get_cval(timer_ctx); | |
| now = kvm_phys_timer_read() - timer_get_offset(timer_ctx); | |
| return cval <= now; | |
| } | |
| int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu) | |
| { | |
| return vcpu_has_wfit_active(vcpu) && wfit_delay_ns(vcpu) == 0; | |
| } | |
| static u64 kvm_timer_needs_notify(struct kvm_vcpu *vcpu) | |
| { | |
| u64 v = vcpu->run->s.regs.device_irq_level; | |
| v ^= kvm_timer_pending(vcpu_vtimer(vcpu)) ? KVM_ARM_DEV_EL1_VTIMER : 0; | |
| v ^= kvm_timer_pending(vcpu_ptimer(vcpu)) ? KVM_ARM_DEV_EL1_PTIMER : 0; | |
| return v & (KVM_ARM_DEV_EL1_VTIMER | KVM_ARM_DEV_EL1_PTIMER); | |
| } | |
| bool kvm_timer_should_notify_user(struct kvm_vcpu *vcpu) | |
| { | |
| return !!kvm_timer_needs_notify(vcpu); | |
| } | |
| /* | |
| * Reflect the timer output level into the kvm_run structure | |
| */ | |
| bool kvm_timer_update_run(struct kvm_vcpu *vcpu) | |
| { | |
| u64 mask = kvm_timer_needs_notify(vcpu); | |
| if (mask) | |
| vcpu->run->s.regs.device_irq_level ^= mask; | |
| return !!mask; | |
| } | |
| static void kvm_timer_update_status(struct arch_timer_context *ctx, bool level) | |
| { | |
| /* | |
| * Paper over NV2 brokenness by publishing the interrupt status | |
| * bit. This still results in a poor quality of emulation (guest | |
| * writes will have no effect until the next exit). | |
| * | |
| * But hey, it's fast, right? | |
| */ | |
| struct kvm_vcpu *vcpu = timer_context_to_vcpu(ctx); | |
| if (is_hyp_ctxt(vcpu) && | |
| (ctx == vcpu_vtimer(vcpu) || ctx == vcpu_ptimer(vcpu))) { | |
| unsigned long val = timer_get_ctl(ctx); | |
| __assign_bit(__ffs(ARCH_TIMER_CTRL_IT_STAT), &val, level); | |
| timer_set_ctl(ctx, val); | |
| } | |
| } | |
| static void kvm_timer_update_irq(struct kvm_vcpu *vcpu, bool new_level, | |
| struct arch_timer_context *timer_ctx) | |
| { | |
| kvm_timer_update_status(timer_ctx, new_level); | |
| trace_kvm_timer_update_irq(vcpu->vcpu_id, timer_irq(timer_ctx), | |
| new_level); | |
| if (userspace_irqchip(vcpu->kvm)) | |
| return; | |
| /* Skip injecting on GICv5 for directly injected (DVI'd) timers */ | |
| if (vgic_is_v5(vcpu->kvm)) { | |
| struct timer_map map; | |
| get_timer_map(vcpu, &map); | |
| if (map.direct_ptimer == timer_ctx || | |
| map.direct_vtimer == timer_ctx) | |
| return; | |
| } | |
| kvm_vgic_inject_irq(vcpu->kvm, vcpu, | |
| timer_irq(timer_ctx), | |
| new_level, | |
| timer_ctx); | |
| } | |
| /* Only called for a fully emulated timer */ | |
| static void timer_emulate(struct arch_timer_context *ctx) | |
| { | |
| bool pending = kvm_timer_pending(ctx); | |
| trace_kvm_timer_emulate(ctx, pending); | |
| kvm_timer_update_irq(timer_context_to_vcpu(ctx), pending, ctx); | |
| /* | |
| * If the timer is pending, we don't need to have a soft timer | |
| * scheduled for the future. If the timer is disabled, then | |
| * we don't need a soft timer either. | |
| */ | |
| if (pending || !kvm_timer_enabled(ctx)) | |
| return; | |
| soft_timer_start(&ctx->hrtimer, kvm_timer_compute_delta(ctx)); | |
| } | |
| static void set_cntvoff(u64 cntvoff) | |
| { | |
| kvm_call_hyp(__kvm_timer_set_cntvoff, cntvoff); | |
| } | |
| static void set_cntpoff(u64 cntpoff) | |
| { | |
| if (has_cntpoff()) | |
| write_sysreg_s(cntpoff, SYS_CNTPOFF_EL2); | |
| } | |
| static void timer_save_state(struct arch_timer_context *ctx) | |
| { | |
| struct arch_timer_cpu *timer = vcpu_timer(timer_context_to_vcpu(ctx)); | |
| enum kvm_arch_timers index = arch_timer_ctx_index(ctx); | |
| unsigned long flags; | |
| if (!timer->enabled) | |
| return; | |
| local_irq_save(flags); | |
| if (!ctx->loaded) | |
| goto out; | |
| switch (index) { | |
| u64 cval; | |
| case TIMER_VTIMER: | |
| case TIMER_HVTIMER: | |
| timer_set_ctl(ctx, read_sysreg_el0(SYS_CNTV_CTL)); | |
| cval = read_sysreg_el0(SYS_CNTV_CVAL); | |
| if (has_broken_cntvoff()) | |
| cval -= timer_get_offset(ctx); | |
| timer_set_cval(ctx, cval); | |
| /* Disable the timer */ | |
| write_sysreg_el0(0, SYS_CNTV_CTL); | |
| isb(); | |
| /* | |
| * The kernel may decide to run userspace after | |
| * calling vcpu_put, so we reset cntvoff to 0 to | |
| * ensure a consistent read between user accesses to | |
| * the virtual counter and kernel access to the | |
| * physical counter of non-VHE case. | |
| * | |
| * For VHE, the virtual counter uses a fixed virtual | |
| * offset of zero, so no need to zero CNTVOFF_EL2 | |
| * register, but this is actually useful when switching | |
| * between EL1/vEL2 with NV. | |
| * | |
| * Do it unconditionally, as this is either unavoidable | |
| * or dirt cheap. | |
| */ | |
| set_cntvoff(0); | |
| break; | |
| case TIMER_PTIMER: | |
| case TIMER_HPTIMER: | |
| timer_set_ctl(ctx, read_sysreg_el0(SYS_CNTP_CTL)); | |
| cval = read_sysreg_el0(SYS_CNTP_CVAL); | |
| cval -= timer_get_offset(ctx); | |
| timer_set_cval(ctx, cval); | |
| /* Disable the timer */ | |
| write_sysreg_el0(0, SYS_CNTP_CTL); | |
| isb(); | |
| set_cntpoff(0); | |
| break; | |
| case NR_KVM_TIMERS: | |
| BUG(); | |
| } | |
| trace_kvm_timer_save_state(ctx); | |
| ctx->loaded = false; | |
| out: | |
| local_irq_restore(flags); | |
| } | |
| /* | |
| * Schedule the background timer before calling kvm_vcpu_halt, so that this | |
| * thread is removed from its waitqueue and made runnable when there's a timer | |
| * interrupt to handle. | |
| */ | |
| static void kvm_timer_blocking(struct kvm_vcpu *vcpu) | |
| { | |
| struct arch_timer_cpu *timer = vcpu_timer(vcpu); | |
| struct timer_map map; | |
| get_timer_map(vcpu, &map); | |
| /* | |
| * If no timers are capable of raising interrupts (disabled or | |
| * masked), then there's no more work for us to do. | |
| */ | |
| if (!kvm_timer_enabled(map.direct_vtimer) && | |
| !kvm_timer_enabled(map.direct_ptimer) && | |
| !kvm_timer_enabled(map.emul_vtimer) && | |
| !kvm_timer_enabled(map.emul_ptimer) && | |
| !vcpu_has_wfit_active(vcpu)) | |
| return; | |
| /* | |
| * At least one guest time will expire. Schedule a background timer. | |
| * Set the earliest expiration time among the guest timers. | |
| */ | |
| soft_timer_start(&timer->bg_timer, kvm_timer_earliest_exp(vcpu)); | |
| } | |
| static void kvm_timer_unblocking(struct kvm_vcpu *vcpu) | |
| { | |
| struct arch_timer_cpu *timer = vcpu_timer(vcpu); | |
| soft_timer_cancel(&timer->bg_timer); | |
| } | |
| static void timer_restore_state(struct arch_timer_context *ctx) | |
| { | |
| struct arch_timer_cpu *timer = vcpu_timer(timer_context_to_vcpu(ctx)); | |
| enum kvm_arch_timers index = arch_timer_ctx_index(ctx); | |
| unsigned long flags; | |
| if (!timer->enabled) | |
| return; | |
| local_irq_save(flags); | |
| if (ctx->loaded) | |
| goto out; | |
| switch (index) { | |
| u64 cval, offset; | |
| case TIMER_VTIMER: | |
| case TIMER_HVTIMER: | |
| cval = timer_get_cval(ctx); | |
| offset = timer_get_offset(ctx); | |
| if (has_broken_cntvoff()) { | |
| set_cntvoff(0); | |
| cval += offset; | |
| } else { | |
| set_cntvoff(offset); | |
| } | |
| write_sysreg_el0(cval, SYS_CNTV_CVAL); | |
| isb(); | |
| write_sysreg_el0(timer_get_ctl(ctx), SYS_CNTV_CTL); | |
| break; | |
| case TIMER_PTIMER: | |
| case TIMER_HPTIMER: | |
| cval = timer_get_cval(ctx); | |
| offset = timer_get_offset(ctx); | |
| set_cntpoff(offset); | |
| cval += offset; | |
| write_sysreg_el0(cval, SYS_CNTP_CVAL); | |
| isb(); | |
| write_sysreg_el0(timer_get_ctl(ctx), SYS_CNTP_CTL); | |
| break; | |
| case NR_KVM_TIMERS: | |
| BUG(); | |
| } | |
| trace_kvm_timer_restore_state(ctx); | |
| ctx->loaded = true; | |
| out: | |
| local_irq_restore(flags); | |
| } | |
| static inline void set_timer_irq_phys_active(struct arch_timer_context *ctx, bool active) | |
| { | |
| int r; | |
| r = irq_set_irqchip_state(ctx->host_timer_irq, IRQCHIP_STATE_ACTIVE, active); | |
| WARN_ON(r); | |
| } | |
| static void kvm_timer_vcpu_load_gic(struct arch_timer_context *ctx) | |
| { | |
| struct kvm_vcpu *vcpu = timer_context_to_vcpu(ctx); | |
| bool pending = kvm_timer_pending(ctx); | |
| bool phys_active = false; | |
| /* | |
| * Update the timer output so that it is likely to match the | |
| * state we're about to restore. If the timer expires between | |
| * this point and the register restoration, we'll take the | |
| * interrupt anyway. | |
| */ | |
| kvm_timer_update_irq(vcpu, pending, ctx); | |
| if (irqchip_in_kernel(vcpu->kvm)) | |
| phys_active = kvm_vgic_map_is_active(vcpu, timer_irq(ctx)); | |
| phys_active |= pending; | |
| phys_active |= vgic_is_v5(vcpu->kvm); | |
| set_timer_irq_phys_active(ctx, phys_active); | |
| } | |
| static void kvm_timer_vcpu_load_nogic(struct kvm_vcpu *vcpu) | |
| { | |
| struct arch_timer_context *vtimer = vcpu_vtimer(vcpu); | |
| bool pending = kvm_timer_pending(vtimer); | |
| /* | |
| * Update the timer output so that it is likely to match the | |
| * state we're about to restore. If the timer expires between | |
| * this point and the register restoration, we'll take the | |
| * interrupt anyway. | |
| */ | |
| kvm_timer_update_irq(vcpu, pending, vtimer); | |
| /* | |
| * When using a userspace irqchip with the architected timers and a | |
| * host interrupt controller that doesn't support an active state, we | |
| * must still prevent continuously exiting from the guest, and | |
| * therefore mask the physical interrupt by disabling it on the host | |
| * interrupt controller when the virtual level is high, such that the | |
| * guest can make forward progress. Once we detect the output level | |
| * being de-asserted, we unmask the interrupt again so that we exit | |
| * from the guest when the timer fires. | |
| */ | |
| if (pending) | |
| disable_percpu_irq(host_vtimer_irq); | |
| else | |
| enable_percpu_irq(host_vtimer_irq, host_vtimer_irq_flags); | |
| } | |
| /* If _pred is true, set bit in _set, otherwise set it in _clr */ | |
| #define assign_clear_set_bit(_pred, _bit, _clr, _set) \ | |
| do { \ | |
| if (_pred) \ | |
| (_set) |= (_bit); \ | |
| else \ | |
| (_clr) |= (_bit); \ | |
| } while (0) | |
| static void kvm_timer_vcpu_load_nested_switch(struct kvm_vcpu *vcpu, | |
| struct timer_map *map) | |
| { | |
| int hw, ret; | |
| if (!irqchip_in_kernel(vcpu->kvm)) | |
| return; | |
| /* | |
| * We only ever unmap the vtimer irq on a VHE system that runs nested | |
| * virtualization, in which case we have both a valid emul_vtimer, | |
| * emul_ptimer, direct_vtimer, and direct_ptimer. | |
| * | |
| * Since this is called from kvm_timer_vcpu_load(), a change between | |
| * vEL2 and vEL1/0 will have just happened, and the timer_map will | |
| * represent this, and therefore we switch the emul/direct mappings | |
| * below. | |
| */ | |
| hw = kvm_vgic_get_map(vcpu, timer_irq(map->direct_vtimer)); | |
| if (hw < 0) { | |
| kvm_vgic_unmap_phys_irq(vcpu, timer_irq(map->emul_vtimer)); | |
| kvm_vgic_unmap_phys_irq(vcpu, timer_irq(map->emul_ptimer)); | |
| ret = kvm_vgic_map_phys_irq(vcpu, | |
| map->direct_vtimer->host_timer_irq, | |
| timer_irq(map->direct_vtimer)); | |
| WARN_ON_ONCE(ret); | |
| ret = kvm_vgic_map_phys_irq(vcpu, | |
| map->direct_ptimer->host_timer_irq, | |
| timer_irq(map->direct_ptimer)); | |
| WARN_ON_ONCE(ret); | |
| } | |
| } | |
| static void timer_set_traps(struct kvm_vcpu *vcpu, struct timer_map *map) | |
| { | |
| bool tvt, tpt, tvc, tpc, tvt02, tpt02; | |
| u64 clr, set; | |
| /* | |
| * No trapping gets configured here with nVHE. See | |
| * __timer_enable_traps(), which is where the stuff happens. | |
| */ | |
| if (!has_vhe()) | |
| return; | |
| /* | |
| * Our default policy is not to trap anything. As we progress | |
| * within this function, reality kicks in and we start adding | |
| * traps based on emulation requirements. | |
| */ | |
| tvt = tpt = tvc = tpc = false; | |
| tvt02 = tpt02 = false; | |
| /* | |
| * NV2 badly breaks the timer semantics by redirecting accesses to | |
| * the EL1 timer state to memory, so let's call ECV to the rescue if | |
| * available: we trap all CNT{P,V}_{CTL,CVAL,TVAL}_EL0 accesses. | |
| * | |
| * The treatment slightly varies depending whether we run a nVHE or | |
| * VHE guest: nVHE will use the _EL0 registers directly, while VHE | |
| * will use the _EL02 accessors. This translates in different trap | |
| * bits. | |
| * | |
| * None of the trapping is required when running in non-HYP context, | |
| * unless required by the L1 hypervisor settings once we advertise | |
| * ECV+NV in the guest, or that we need trapping for other reasons. | |
| */ | |
| if (cpus_have_final_cap(ARM64_HAS_ECV) && is_hyp_ctxt(vcpu)) { | |
| if (vcpu_el2_e2h_is_set(vcpu)) | |
| tvt02 = tpt02 = true; | |
| else | |
| tvt = tpt = true; | |
| } | |
| /* | |
| * We have two possibility to deal with a physical offset: | |
| * | |
| * - Either we have CNTPOFF (yay!) or the offset is 0: | |
| * we let the guest freely access the HW | |
| * | |
| * - or neither of these condition apply: | |
| * we trap accesses to the HW, but still use it | |
| * after correcting the physical offset | |
| */ | |
| if (!has_cntpoff() && timer_get_offset(map->direct_ptimer)) | |
| tpt = tpc = true; | |
| /* | |
| * For the poor sods that could not correctly subtract one value | |
| * from another, trap the full virtual timer and counter. | |
| */ | |
| if (has_broken_cntvoff() && timer_get_offset(map->direct_vtimer)) | |
| tvt = tvc = true; | |
| /* | |
| * Apply the enable bits that the guest hypervisor has requested for | |
| * its own guest. We can only add traps that wouldn't have been set | |
| * above. | |
| * Implementation choices: we do not support NV when E2H=0 in the | |
| * guest, and we don't support configuration where E2H is writable | |
| * by the guest (either FEAT_VHE or FEAT_E2H0 is implemented, but | |
| * not both). This simplifies the handling of the EL1NV* bits. | |
| */ | |
| if (is_nested_ctxt(vcpu)) { | |
| u64 val = __vcpu_sys_reg(vcpu, CNTHCTL_EL2); | |
| /* Use the VHE format for mental sanity */ | |
| if (!vcpu_el2_e2h_is_set(vcpu)) | |
| val = (val & (CNTHCTL_EL1PCEN | CNTHCTL_EL1PCTEN)) << 10; | |
| tpt |= !(val & (CNTHCTL_EL1PCEN << 10)); | |
| tpc |= !(val & (CNTHCTL_EL1PCTEN << 10)); | |
| tpt02 |= (val & CNTHCTL_EL1NVPCT); | |
| tvt02 |= (val & CNTHCTL_EL1NVVCT); | |
| } | |
| /* | |
| * Now that we have collected our requirements, compute the | |
| * trap and enable bits. | |
| */ | |
| set = 0; | |
| clr = 0; | |
| assign_clear_set_bit(tpt, CNTHCTL_EL1PCEN << 10, set, clr); | |
| assign_clear_set_bit(tpc, CNTHCTL_EL1PCTEN << 10, set, clr); | |
| assign_clear_set_bit(tvt, CNTHCTL_EL1TVT, clr, set); | |
| assign_clear_set_bit(tvc, CNTHCTL_EL1TVCT, clr, set); | |
| assign_clear_set_bit(tvt02, CNTHCTL_EL1NVVCT, clr, set); | |
| assign_clear_set_bit(tpt02, CNTHCTL_EL1NVPCT, clr, set); | |
| /* | |
| * This only happens on VHE, so use the CNTHCTL_EL2 accessor, unless | |
| * we are sure CNTKCTL_EL1 is completely stateful with FEAT_NV2p1. | |
| */ | |
| if (!cpus_have_final_cap(ARM64_HAS_NV2P1)) | |
| sysreg_clear_set(cnthctl_el2, clr, set); | |
| else | |
| sysreg_clear_set(cntkctl_el1, clr, set); | |
| } | |
| void kvm_timer_vcpu_load(struct kvm_vcpu *vcpu) | |
| { | |
| struct arch_timer_cpu *timer = vcpu_timer(vcpu); | |
| struct timer_map map; | |
| if (unlikely(!timer->enabled)) | |
| return; | |
| get_timer_map(vcpu, &map); | |
| if (static_branch_likely(&has_gic_active_state)) { | |
| /* We don't do NV on GICv5, yet */ | |
| if (vcpu_has_nv(vcpu) && !vgic_is_v5(vcpu->kvm)) | |
| kvm_timer_vcpu_load_nested_switch(vcpu, &map); | |
| kvm_timer_vcpu_load_gic(map.direct_vtimer); | |
| if (map.direct_ptimer) | |
| kvm_timer_vcpu_load_gic(map.direct_ptimer); | |
| } else { | |
| kvm_timer_vcpu_load_nogic(vcpu); | |
| } | |
| kvm_timer_unblocking(vcpu); | |
| timer_restore_state(map.direct_vtimer); | |
| if (map.direct_ptimer) | |
| timer_restore_state(map.direct_ptimer); | |
| if (map.emul_vtimer) | |
| timer_emulate(map.emul_vtimer); | |
| if (map.emul_ptimer) | |
| timer_emulate(map.emul_ptimer); | |
| timer_set_traps(vcpu, &map); | |
| } | |
| void kvm_timer_vcpu_put(struct kvm_vcpu *vcpu) | |
| { | |
| struct arch_timer_cpu *timer = vcpu_timer(vcpu); | |
| struct timer_map map; | |
| if (unlikely(!timer->enabled)) | |
| return; | |
| get_timer_map(vcpu, &map); | |
| timer_save_state(map.direct_vtimer); | |
| if (map.direct_ptimer) | |
| timer_save_state(map.direct_ptimer); | |
| /* | |
| * Cancel soft timer emulation, because the only case where we | |
| * need it after a vcpu_put is in the context of a sleeping VCPU, and | |
| * in that case we already factor in the deadline for the physical | |
| * timer when scheduling the bg_timer. | |
| * | |
| * In any case, we re-schedule the hrtimer for the physical timer when | |
| * coming back to the VCPU thread in kvm_timer_vcpu_load(). | |
| */ | |
| if (map.emul_vtimer) | |
| soft_timer_cancel(&map.emul_vtimer->hrtimer); | |
| if (map.emul_ptimer) | |
| soft_timer_cancel(&map.emul_ptimer->hrtimer); | |
| if (kvm_vcpu_is_blocking(vcpu)) | |
| kvm_timer_blocking(vcpu); | |
| if (vgic_is_v5(vcpu->kvm)) { | |
| set_timer_irq_phys_active(map.direct_vtimer, false); | |
| if (map.direct_ptimer) | |
| set_timer_irq_phys_active(map.direct_ptimer, false); | |
| } | |
| } | |
| void kvm_timer_sync_nested(struct kvm_vcpu *vcpu) | |
| { | |
| /* | |
| * When NV2 is on, guest hypervisors have their EL1 timer register | |
| * accesses redirected to the VNCR page. Any guest action taken on | |
| * the timer is postponed until the next exit, leading to a very | |
| * poor quality of emulation. | |
| * | |
| * This is an unmitigated disaster, only papered over by FEAT_ECV, | |
| * which allows trapping of the timer registers even with NV2. | |
| * Still, this is still worse than FEAT_NV on its own. Meh. | |
| */ | |
| if (!cpus_have_final_cap(ARM64_HAS_ECV)) { | |
| /* | |
| * For a VHE guest hypervisor, the EL2 state is directly | |
| * stored in the host EL1 timers, while the emulated EL1 | |
| * state is stored in the VNCR page. The latter could have | |
| * been updated behind our back, and we must reset the | |
| * emulation of the timers. | |
| * | |
| * A non-VHE guest hypervisor doesn't have any direct access | |
| * to its timers: the EL2 registers trap despite being | |
| * notionally direct (we use the EL1 HW, as for VHE), while | |
| * the EL1 registers access memory. | |
| * | |
| * In both cases, process the emulated timers on each guest | |
| * exit. Boo. | |
| */ | |
| struct timer_map map; | |
| get_timer_map(vcpu, &map); | |
| soft_timer_cancel(&map.emul_vtimer->hrtimer); | |
| soft_timer_cancel(&map.emul_ptimer->hrtimer); | |
| timer_emulate(map.emul_vtimer); | |
| timer_emulate(map.emul_ptimer); | |
| } | |
| } | |
| /* | |
| * With a userspace irqchip we have to check if the guest de-asserted the | |
| * timer and if so, unmask the timer irq signal on the host interrupt | |
| * controller to ensure that we see future timer signals. | |
| */ | |
| static void unmask_vtimer_irq_user(struct kvm_vcpu *vcpu) | |
| { | |
| struct arch_timer_context *vtimer = vcpu_vtimer(vcpu); | |
| if (!kvm_timer_pending(vtimer)) { | |
| kvm_timer_update_irq(vcpu, false, vtimer); | |
| if (static_branch_likely(&has_gic_active_state)) | |
| set_timer_irq_phys_active(vtimer, false); | |
| else | |
| enable_percpu_irq(host_vtimer_irq, host_vtimer_irq_flags); | |
| } | |
| } | |
| void kvm_timer_sync_user(struct kvm_vcpu *vcpu) | |
| { | |
| struct arch_timer_cpu *timer = vcpu_timer(vcpu); | |
| if (unlikely(!timer->enabled)) | |
| return; | |
| if (unlikely(!irqchip_in_kernel(vcpu->kvm))) | |
| unmask_vtimer_irq_user(vcpu); | |
| } | |
| void kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu) | |
| { | |
| struct arch_timer_cpu *timer = vcpu_timer(vcpu); | |
| struct timer_map map; | |
| get_timer_map(vcpu, &map); | |
| /* | |
| * The bits in CNTV_CTL are architecturally reset to UNKNOWN for ARMv8 | |
| * and to 0 for ARMv7. We provide an implementation that always | |
| * resets the timer to be disabled and unmasked and is compliant with | |
| * the ARMv7 architecture. | |
| */ | |
| for (int i = 0; i < nr_timers(vcpu); i++) | |
| timer_set_ctl(vcpu_get_timer(vcpu, i), 0); | |
| /* | |
| * A vcpu running at EL2 is in charge of the offset applied to | |
| * the virtual timer, so use the physical VM offset, and point | |
| * the vcpu offset to CNTVOFF_EL2. | |
| */ | |
| if (vcpu_has_nv(vcpu)) { | |
| struct arch_timer_offset *offs = &vcpu_vtimer(vcpu)->offset; | |
| offs->vcpu_offset = __ctxt_sys_reg(&vcpu->arch.ctxt, CNTVOFF_EL2); | |
| offs->vm_offset = &vcpu->kvm->arch.timer_data.poffset; | |
| } | |
| if (timer->enabled) { | |
| for (int i = 0; i < nr_timers(vcpu); i++) | |
| kvm_timer_update_irq(vcpu, false, | |
| vcpu_get_timer(vcpu, i)); | |
| if (irqchip_in_kernel(vcpu->kvm)) { | |
| kvm_vgic_reset_mapped_irq(vcpu, timer_irq(map.direct_vtimer)); | |
| if (map.direct_ptimer) | |
| kvm_vgic_reset_mapped_irq(vcpu, timer_irq(map.direct_ptimer)); | |
| } | |
| } | |
| if (map.emul_vtimer) | |
| soft_timer_cancel(&map.emul_vtimer->hrtimer); | |
| if (map.emul_ptimer) | |
| soft_timer_cancel(&map.emul_ptimer->hrtimer); | |
| } | |
| static void timer_context_init(struct kvm_vcpu *vcpu, int timerid) | |
| { | |
| struct arch_timer_context *ctxt = vcpu_get_timer(vcpu, timerid); | |
| struct kvm *kvm = vcpu->kvm; | |
| ctxt->timer_id = timerid; | |
| if (!kvm_vm_is_protected(vcpu->kvm)) { | |
| if (timerid == TIMER_VTIMER) | |
| ctxt->offset.vm_offset = &kvm->arch.timer_data.voffset; | |
| else | |
| ctxt->offset.vm_offset = &kvm->arch.timer_data.poffset; | |
| } else { | |
| ctxt->offset.vm_offset = NULL; | |
| } | |
| hrtimer_setup(&ctxt->hrtimer, kvm_hrtimer_expire, CLOCK_MONOTONIC, HRTIMER_MODE_ABS_HARD); | |
| switch (timerid) { | |
| case TIMER_PTIMER: | |
| case TIMER_HPTIMER: | |
| ctxt->host_timer_irq = host_ptimer_irq; | |
| break; | |
| case TIMER_VTIMER: | |
| case TIMER_HVTIMER: | |
| ctxt->host_timer_irq = host_vtimer_irq; | |
| break; | |
| } | |
| } | |
| void kvm_timer_vcpu_init(struct kvm_vcpu *vcpu) | |
| { | |
| struct arch_timer_cpu *timer = vcpu_timer(vcpu); | |
| for (int i = 0; i < NR_KVM_TIMERS; i++) | |
| timer_context_init(vcpu, i); | |
| /* Synchronize offsets across timers of a VM if not already provided */ | |
| if (!vcpu_is_protected(vcpu) && | |
| !test_bit(KVM_ARCH_FLAG_VM_COUNTER_OFFSET, &vcpu->kvm->arch.flags)) { | |
| timer_set_offset(vcpu_vtimer(vcpu), kvm_phys_timer_read()); | |
| timer_set_offset(vcpu_ptimer(vcpu), 0); | |
| } | |
| hrtimer_setup(&timer->bg_timer, kvm_bg_timer_expire, CLOCK_MONOTONIC, | |
| HRTIMER_MODE_ABS_HARD); | |
| } | |
| /* | |
| * This is always called during kvm_arch_init_vm, but will also be | |
| * called from kvm_vgic_create if we have a vGICv5. | |
| */ | |
| void kvm_timer_init_vm(struct kvm *kvm) | |
| { | |
| /* | |
| * Set up the default PPIs - note that we adjust them based on | |
| * the model of the GIC as GICv5 uses a different way to | |
| * describing interrupts. | |
| */ | |
| for (int i = 0; i < NR_KVM_TIMERS; i++) | |
| kvm->arch.timer_data.ppi[i] = get_vgic_ppi(kvm, default_ppi[i]); | |
| } | |
| void kvm_timer_cpu_up(void) | |
| { | |
| enable_percpu_irq(host_vtimer_irq, host_vtimer_irq_flags); | |
| if (host_ptimer_irq) | |
| enable_percpu_irq(host_ptimer_irq, host_ptimer_irq_flags); | |
| } | |
| void kvm_timer_cpu_down(void) | |
| { | |
| disable_percpu_irq(host_vtimer_irq); | |
| if (host_ptimer_irq) | |
| disable_percpu_irq(host_ptimer_irq); | |
| } | |
| static u64 read_timer_ctl(struct arch_timer_context *timer) | |
| { | |
| /* | |
| * Set ISTATUS bit if it's expired. | |
| * Note that according to ARMv8 ARM Issue A.k, ISTATUS bit is | |
| * UNKNOWN when ENABLE bit is 0, so we chose to set ISTATUS bit | |
| * regardless of ENABLE bit for our implementation convenience. | |
| */ | |
| u32 ctl = timer_get_ctl(timer); | |
| if (!kvm_timer_compute_delta(timer)) | |
| ctl |= ARCH_TIMER_CTRL_IT_STAT; | |
| return ctl; | |
| } | |
| static u64 kvm_arm_timer_read(struct kvm_vcpu *vcpu, | |
| struct arch_timer_context *timer, | |
| enum kvm_arch_timer_regs treg) | |
| { | |
| u64 val; | |
| switch (treg) { | |
| case TIMER_REG_TVAL: | |
| val = timer_get_cval(timer) - kvm_phys_timer_read() + timer_get_offset(timer); | |
| val = lower_32_bits(val); | |
| break; | |
| case TIMER_REG_CTL: | |
| val = read_timer_ctl(timer); | |
| break; | |
| case TIMER_REG_CVAL: | |
| val = timer_get_cval(timer); | |
| break; | |
| case TIMER_REG_CNT: | |
| val = kvm_phys_timer_read() - timer_get_offset(timer); | |
| break; | |
| case TIMER_REG_VOFF: | |
| val = *timer->offset.vcpu_offset; | |
| break; | |
| default: | |
| BUG(); | |
| } | |
| return val; | |
| } | |
| u64 kvm_arm_timer_read_sysreg(struct kvm_vcpu *vcpu, | |
| enum kvm_arch_timers tmr, | |
| enum kvm_arch_timer_regs treg) | |
| { | |
| struct arch_timer_context *timer; | |
| struct timer_map map; | |
| u64 val; | |
| get_timer_map(vcpu, &map); | |
| timer = vcpu_get_timer(vcpu, tmr); | |
| if (timer == map.emul_vtimer || timer == map.emul_ptimer) | |
| return kvm_arm_timer_read(vcpu, timer, treg); | |
| preempt_disable(); | |
| timer_save_state(timer); | |
| val = kvm_arm_timer_read(vcpu, timer, treg); | |
| timer_restore_state(timer); | |
| preempt_enable(); | |
| return val; | |
| } | |
| static void kvm_arm_timer_write(struct kvm_vcpu *vcpu, | |
| struct arch_timer_context *timer, | |
| enum kvm_arch_timer_regs treg, | |
| u64 val) | |
| { | |
| switch (treg) { | |
| case TIMER_REG_TVAL: | |
| timer_set_cval(timer, kvm_phys_timer_read() - timer_get_offset(timer) + (s32)val); | |
| break; | |
| case TIMER_REG_CTL: | |
| timer_set_ctl(timer, val & ~ARCH_TIMER_CTRL_IT_STAT); | |
| break; | |
| case TIMER_REG_CVAL: | |
| timer_set_cval(timer, val); | |
| break; | |
| case TIMER_REG_VOFF: | |
| *timer->offset.vcpu_offset = val; | |
| break; | |
| default: | |
| BUG(); | |
| } | |
| } | |
| void kvm_arm_timer_write_sysreg(struct kvm_vcpu *vcpu, | |
| enum kvm_arch_timers tmr, | |
| enum kvm_arch_timer_regs treg, | |
| u64 val) | |
| { | |
| struct arch_timer_context *timer; | |
| struct timer_map map; | |
| get_timer_map(vcpu, &map); | |
| timer = vcpu_get_timer(vcpu, tmr); | |
| if (timer == map.emul_vtimer || timer == map.emul_ptimer) { | |
| soft_timer_cancel(&timer->hrtimer); | |
| kvm_arm_timer_write(vcpu, timer, treg, val); | |
| timer_emulate(timer); | |
| } else { | |
| preempt_disable(); | |
| timer_save_state(timer); | |
| kvm_arm_timer_write(vcpu, timer, treg, val); | |
| timer_restore_state(timer); | |
| preempt_enable(); | |
| } | |
| } | |
| static int timer_irq_set_vcpu_affinity(struct irq_data *d, void *vcpu) | |
| { | |
| if (vcpu) | |
| irqd_set_forwarded_to_vcpu(d); | |
| else | |
| irqd_clr_forwarded_to_vcpu(d); | |
| return 0; | |
| } | |
| static int timer_irq_set_irqchip_state(struct irq_data *d, | |
| enum irqchip_irq_state which, bool val) | |
| { | |
| bool passthrough = which != IRQCHIP_STATE_ACTIVE || | |
| !irqd_is_forwarded_to_vcpu(d) || | |
| (kvm_vgic_global_state.type == VGIC_V5 && | |
| vgic_is_v3(kvm_get_running_vcpu()->kvm)); | |
| if (passthrough) | |
| return irq_chip_set_parent_state(d, which, val); | |
| if (val) | |
| irq_chip_mask_parent(d); | |
| else | |
| irq_chip_unmask_parent(d); | |
| return 0; | |
| } | |
| static void timer_irq_eoi(struct irq_data *d) | |
| { | |
| if (!irqd_is_forwarded_to_vcpu(d)) | |
| irq_chip_eoi_parent(d); | |
| } | |
| static void timer_irq_ack(struct irq_data *d) | |
| { | |
| d = d->parent_data; | |
| if (d->chip->irq_ack) | |
| d->chip->irq_ack(d); | |
| } | |
| static struct irq_chip timer_chip = { | |
| .name = "KVM", | |
| .irq_ack = timer_irq_ack, | |
| .irq_mask = irq_chip_mask_parent, | |
| .irq_unmask = irq_chip_unmask_parent, | |
| .irq_eoi = timer_irq_eoi, | |
| .irq_set_type = irq_chip_set_type_parent, | |
| .irq_set_vcpu_affinity = timer_irq_set_vcpu_affinity, | |
| .irq_set_irqchip_state = timer_irq_set_irqchip_state, | |
| }; | |
| static int timer_irq_domain_alloc(struct irq_domain *domain, unsigned int virq, | |
| unsigned int nr_irqs, void *arg) | |
| { | |
| irq_hw_number_t hwirq = (uintptr_t)arg; | |
| return irq_domain_set_hwirq_and_chip(domain, virq, hwirq, | |
| &timer_chip, NULL); | |
| } | |
| static void timer_irq_domain_free(struct irq_domain *domain, unsigned int virq, | |
| unsigned int nr_irqs) | |
| { | |
| } | |
| static const struct irq_domain_ops timer_domain_ops = { | |
| .alloc = timer_irq_domain_alloc, | |
| .free = timer_irq_domain_free, | |
| }; | |
| static void kvm_irq_fixup_flags(unsigned int virq, u32 *flags) | |
| { | |
| *flags = irq_get_trigger_type(virq); | |
| if (*flags != IRQF_TRIGGER_HIGH && *flags != IRQF_TRIGGER_LOW) { | |
| kvm_err("Invalid trigger for timer IRQ%d, assuming level low\n", | |
| virq); | |
| *flags = IRQF_TRIGGER_LOW; | |
| } | |
| } | |
| static int kvm_irq_init(struct arch_timer_kvm_info *info) | |
| { | |
| struct irq_domain *domain = NULL; | |
| if (info->virtual_irq <= 0) { | |
| kvm_err("kvm_arch_timer: invalid virtual timer IRQ: %d\n", | |
| info->virtual_irq); | |
| return -ENODEV; | |
| } | |
| host_vtimer_irq = info->virtual_irq; | |
| kvm_irq_fixup_flags(host_vtimer_irq, &host_vtimer_irq_flags); | |
| if (kvm_vgic_global_state.no_hw_deactivation || | |
| kvm_vgic_global_state.type == VGIC_V5) { | |
| struct fwnode_handle *fwnode; | |
| struct irq_data *data; | |
| fwnode = irq_domain_alloc_named_fwnode("kvm-timer"); | |
| if (!fwnode) | |
| return -ENOMEM; | |
| /* Assume both vtimer and ptimer in the same parent */ | |
| data = irq_get_irq_data(host_vtimer_irq); | |
| domain = irq_domain_create_hierarchy(data->domain, 0, | |
| NR_KVM_TIMERS, fwnode, | |
| &timer_domain_ops, NULL); | |
| if (!domain) { | |
| irq_domain_free_fwnode(fwnode); | |
| return -ENOMEM; | |
| } | |
| WARN_ON(irq_domain_push_irq(domain, host_vtimer_irq, | |
| (void *)TIMER_VTIMER)); | |
| } | |
| if (info->physical_irq > 0) { | |
| host_ptimer_irq = info->physical_irq; | |
| kvm_irq_fixup_flags(host_ptimer_irq, &host_ptimer_irq_flags); | |
| if (domain) | |
| WARN_ON(irq_domain_push_irq(domain, host_ptimer_irq, | |
| (void *)TIMER_PTIMER)); | |
| } | |
| return 0; | |
| } | |
| static void kvm_timer_handle_errata(void) | |
| { | |
| u64 mmfr0, mmfr1, mmfr4; | |
| /* | |
| * CNTVOFF_EL2 is broken on some implementations. For those, we trap | |
| * all virtual timer/counter accesses, requiring FEAT_ECV. | |
| * | |
| * However, a hypervisor supporting nesting is likely to mitigate the | |
| * erratum at L0, and not require other levels to mitigate it (which | |
| * would otherwise be a terrible performance sink due to trap | |
| * amplification). | |
| * | |
| * Given that the affected HW implements both FEAT_VHE and FEAT_E2H0, | |
| * and that NV is likely not to (because of limitations of the | |
| * architecture), only enable the workaround when FEAT_VHE and | |
| * FEAT_E2H0 are both detected. Time will tell if this actually holds. | |
| */ | |
| mmfr0 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1); | |
| mmfr1 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR1_EL1); | |
| mmfr4 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR4_EL1); | |
| if (SYS_FIELD_GET(ID_AA64MMFR1_EL1, VH, mmfr1) && | |
| !SYS_FIELD_GET(ID_AA64MMFR4_EL1, E2H0, mmfr4) && | |
| SYS_FIELD_GET(ID_AA64MMFR0_EL1, ECV, mmfr0) && | |
| (has_vhe() || has_hvhe()) && | |
| cpus_have_final_cap(ARM64_WORKAROUND_QCOM_ORYON_CNTVOFF)) { | |
| static_branch_enable(&broken_cntvoff_key); | |
| kvm_info("Broken CNTVOFF_EL2, trapping virtual timer\n"); | |
| } | |
| } | |
| int __init kvm_timer_hyp_init(bool has_gic) | |
| { | |
| struct arch_timer_kvm_info *info; | |
| int err; | |
| info = arch_timer_get_kvm_info(); | |
| timecounter = &info->timecounter; | |
| if (!timecounter->cc) { | |
| kvm_err("kvm_arch_timer: uninitialized timecounter\n"); | |
| return -ENODEV; | |
| } | |
| err = kvm_irq_init(info); | |
| if (err) | |
| return err; | |
| /* First, do the virtual EL1 timer irq */ | |
| err = request_percpu_irq(host_vtimer_irq, kvm_arch_timer_handler, | |
| "kvm guest vtimer", kvm_get_running_vcpus()); | |
| if (err) { | |
| kvm_err("kvm_arch_timer: can't request vtimer interrupt %d (%d)\n", | |
| host_vtimer_irq, err); | |
| return err; | |
| } | |
| if (has_gic) { | |
| err = irq_set_vcpu_affinity(host_vtimer_irq, | |
| kvm_get_running_vcpus()); | |
| if (err) { | |
| kvm_err("kvm_arch_timer: error setting vcpu affinity\n"); | |
| goto out_free_vtimer_irq; | |
| } | |
| static_branch_enable(&has_gic_active_state); | |
| } | |
| kvm_debug("virtual timer IRQ%d\n", host_vtimer_irq); | |
| /* Now let's do the physical EL1 timer irq */ | |
| if (info->physical_irq > 0) { | |
| err = request_percpu_irq(host_ptimer_irq, kvm_arch_timer_handler, | |
| "kvm guest ptimer", kvm_get_running_vcpus()); | |
| if (err) { | |
| kvm_err("kvm_arch_timer: can't request ptimer interrupt %d (%d)\n", | |
| host_ptimer_irq, err); | |
| goto out_free_vtimer_irq; | |
| } | |
| if (has_gic) { | |
| err = irq_set_vcpu_affinity(host_ptimer_irq, | |
| kvm_get_running_vcpus()); | |
| if (err) { | |
| kvm_err("kvm_arch_timer: error setting vcpu affinity\n"); | |
| goto out_free_ptimer_irq; | |
| } | |
| } | |
| kvm_debug("physical timer IRQ%d\n", host_ptimer_irq); | |
| } else if (has_vhe()) { | |
| kvm_err("kvm_arch_timer: invalid physical timer IRQ: %d\n", | |
| info->physical_irq); | |
| err = -ENODEV; | |
| goto out_free_vtimer_irq; | |
| } | |
| kvm_timer_handle_errata(); | |
| return 0; | |
| out_free_ptimer_irq: | |
| if (info->physical_irq > 0) | |
| free_percpu_irq(host_ptimer_irq, kvm_get_running_vcpus()); | |
| out_free_vtimer_irq: | |
| free_percpu_irq(host_vtimer_irq, kvm_get_running_vcpus()); | |
| return err; | |
| } | |
| void kvm_timer_vcpu_terminate(struct kvm_vcpu *vcpu) | |
| { | |
| struct arch_timer_cpu *timer = vcpu_timer(vcpu); | |
| soft_timer_cancel(&timer->bg_timer); | |
| } | |
| static bool timer_irqs_are_valid(struct kvm_vcpu *vcpu) | |
| { | |
| u32 ppis = 0; | |
| bool valid; | |
| mutex_lock(&vcpu->kvm->arch.config_lock); | |
| for (int i = 0; i < nr_timers(vcpu); i++) { | |
| struct arch_timer_context *ctx; | |
| int irq; | |
| ctx = vcpu_get_timer(vcpu, i); | |
| irq = timer_irq(ctx); | |
| /* With GICv5, the default PPI is what you get -- nothing else */ | |
| if (vgic_is_v5(vcpu->kvm) && irq != get_vgic_ppi(vcpu->kvm, default_ppi[i])) | |
| break; | |
| if (kvm_vgic_set_owner(vcpu, irq, ctx)) | |
| break; | |
| /* | |
| * We know by construction that we only have PPIs, so all values | |
| * are less than 32 for non-GICv5 VGICs. On GICv5, they are | |
| * architecturally defined to be under 32 too. However, we mask | |
| * off most of the bits as we might be presented with a GICv5 | |
| * style PPI where the type is encoded in the top-bits. | |
| */ | |
| ppis |= BIT(irq & 0x1f); | |
| } | |
| valid = hweight32(ppis) == nr_timers(vcpu); | |
| if (valid) | |
| set_bit(KVM_ARCH_FLAG_TIMER_PPIS_IMMUTABLE, &vcpu->kvm->arch.flags); | |
| mutex_unlock(&vcpu->kvm->arch.config_lock); | |
| return valid; | |
| } | |
| static bool kvm_arch_timer_get_input_level(int vintid) | |
| { | |
| struct kvm_vcpu *vcpu = kvm_get_running_vcpu(); | |
| if (WARN(!vcpu, "No vcpu context!\n")) | |
| return false; | |
| for (int i = 0; i < nr_timers(vcpu); i++) { | |
| struct arch_timer_context *ctx; | |
| ctx = vcpu_get_timer(vcpu, i); | |
| if (timer_irq(ctx) == vintid) | |
| return kvm_timer_pending(ctx); | |
| } | |
| /* A timer IRQ has fired, but no matching timer was found? */ | |
| WARN_RATELIMIT(1, "timer INTID%d unknown\n", vintid); | |
| return false; | |
| } | |
| int kvm_timer_enable(struct kvm_vcpu *vcpu) | |
| { | |
| struct arch_timer_cpu *timer = vcpu_timer(vcpu); | |
| const struct irq_ops *ops; | |
| struct timer_map map; | |
| int ret; | |
| if (timer->enabled) | |
| return 0; | |
| /* Without a VGIC we do not map virtual IRQs to physical IRQs */ | |
| if (!irqchip_in_kernel(vcpu->kvm)) | |
| goto no_vgic; | |
| /* | |
| * At this stage, we have the guarantee that the vgic is both | |
| * available and initialized. | |
| */ | |
| if (!timer_irqs_are_valid(vcpu)) { | |
| kvm_debug("incorrectly configured timer irqs\n"); | |
| return -EINVAL; | |
| } | |
| get_timer_map(vcpu, &map); | |
| ops = vgic_is_v5(vcpu->kvm) ? &arch_timer_irq_ops_vgic_v5 : | |
| &arch_timer_irq_ops; | |
| for (int i = 0; i < nr_timers(vcpu); i++) | |
| kvm_vgic_set_irq_ops(vcpu, timer_irq(vcpu_get_timer(vcpu, i)), ops); | |
| ret = kvm_vgic_map_phys_irq(vcpu, | |
| map.direct_vtimer->host_timer_irq, | |
| timer_irq(map.direct_vtimer)); | |
| if (ret) | |
| return ret; | |
| if (map.direct_ptimer) | |
| ret = kvm_vgic_map_phys_irq(vcpu, | |
| map.direct_ptimer->host_timer_irq, | |
| timer_irq(map.direct_ptimer)); | |
| if (ret) | |
| return ret; | |
| no_vgic: | |
| timer->enabled = 1; | |
| return 0; | |
| } | |
| /* If we have CNTPOFF, permanently set ECV to enable it */ | |
| void kvm_timer_init_vhe(void) | |
| { | |
| if (cpus_have_final_cap(ARM64_HAS_ECV_CNTPOFF)) | |
| sysreg_clear_set(cnthctl_el2, 0, CNTHCTL_ECV); | |
| } | |
| int kvm_arm_timer_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr) | |
| { | |
| int __user *uaddr = (int __user *)(long)attr->addr; | |
| int irq, idx, ret = 0; | |
| if (!irqchip_in_kernel(vcpu->kvm)) | |
| return -EINVAL; | |
| if (get_user(irq, uaddr)) | |
| return -EFAULT; | |
| if (!(irq_is_ppi(vcpu->kvm, irq))) | |
| return -EINVAL; | |
| guard(mutex)(&vcpu->kvm->arch.config_lock); | |
| if (test_bit(KVM_ARCH_FLAG_TIMER_PPIS_IMMUTABLE, | |
| &vcpu->kvm->arch.flags)) { | |
| return -EBUSY; | |
| } | |
| switch (attr->attr) { | |
| case KVM_ARM_VCPU_TIMER_IRQ_VTIMER: | |
| idx = TIMER_VTIMER; | |
| break; | |
| case KVM_ARM_VCPU_TIMER_IRQ_PTIMER: | |
| idx = TIMER_PTIMER; | |
| break; | |
| case KVM_ARM_VCPU_TIMER_IRQ_HVTIMER: | |
| idx = TIMER_HVTIMER; | |
| break; | |
| case KVM_ARM_VCPU_TIMER_IRQ_HPTIMER: | |
| idx = TIMER_HPTIMER; | |
| break; | |
| default: | |
| return -ENXIO; | |
| } | |
| /* | |
| * We cannot validate the IRQ unicity before we run, so take it at | |
| * face value. The verdict will be given on first vcpu run, for each | |
| * vcpu. Yes this is late. Blame it on the stupid API. | |
| */ | |
| vcpu->kvm->arch.timer_data.ppi[idx] = irq; | |
| return ret; | |
| } | |
| int kvm_arm_timer_get_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr) | |
| { | |
| int __user *uaddr = (int __user *)(long)attr->addr; | |
| struct arch_timer_context *timer; | |
| int irq; | |
| switch (attr->attr) { | |
| case KVM_ARM_VCPU_TIMER_IRQ_VTIMER: | |
| timer = vcpu_vtimer(vcpu); | |
| break; | |
| case KVM_ARM_VCPU_TIMER_IRQ_PTIMER: | |
| timer = vcpu_ptimer(vcpu); | |
| break; | |
| case KVM_ARM_VCPU_TIMER_IRQ_HVTIMER: | |
| timer = vcpu_hvtimer(vcpu); | |
| break; | |
| case KVM_ARM_VCPU_TIMER_IRQ_HPTIMER: | |
| timer = vcpu_hptimer(vcpu); | |
| break; | |
| default: | |
| return -ENXIO; | |
| } | |
| irq = timer_irq(timer); | |
| return put_user(irq, uaddr); | |
| } | |
| int kvm_arm_timer_has_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr) | |
| { | |
| switch (attr->attr) { | |
| case KVM_ARM_VCPU_TIMER_IRQ_VTIMER: | |
| case KVM_ARM_VCPU_TIMER_IRQ_PTIMER: | |
| case KVM_ARM_VCPU_TIMER_IRQ_HVTIMER: | |
| case KVM_ARM_VCPU_TIMER_IRQ_HPTIMER: | |
| return 0; | |
| } | |
| return -ENXIO; | |
| } | |
| int kvm_vm_ioctl_set_counter_offset(struct kvm *kvm, | |
| struct kvm_arm_counter_offset *offset) | |
| { | |
| int ret = 0; | |
| if (offset->reserved) | |
| return -EINVAL; | |
| if (kvm_vm_is_protected(kvm)) | |
| return -EINVAL; | |
| mutex_lock(&kvm->lock); | |
| if (!kvm_trylock_all_vcpus(kvm)) { | |
| set_bit(KVM_ARCH_FLAG_VM_COUNTER_OFFSET, &kvm->arch.flags); | |
| /* | |
| * If userspace decides to set the offset using this | |
| * API rather than merely restoring the counter | |
| * values, the offset applies to both the virtual and | |
| * physical views. | |
| */ | |
| kvm->arch.timer_data.voffset = offset->counter_offset; | |
| kvm->arch.timer_data.poffset = offset->counter_offset; | |
| kvm_unlock_all_vcpus(kvm); | |
| } else { | |
| ret = -EBUSY; | |
| } | |
| mutex_unlock(&kvm->lock); | |
| return ret; | |
| } |