| /* SPDX-License-Identifier: GPL-2.0-only */ | |
| /* | |
| * Copyright (C) 2012 ARM Ltd. | |
| * Author: Marc Zyngier <marc.zyngier@arm.com> | |
| */ | |
| #ifndef __ASM__VIRT_H | |
| #define __ASM__VIRT_H | |
| /* | |
| * The arm64 hcall implementation uses x0 to specify the hcall | |
| * number. A value less than HVC_STUB_HCALL_NR indicates a special | |
| * hcall, such as set vector. Any other value is handled in a | |
| * hypervisor specific way. | |
| * | |
| * The hypercall is allowed to clobber any of the caller-saved | |
| * registers (x0-x18), so it is advisable to use it through the | |
| * indirection of a function call (as implemented in hyp-stub.S). | |
| */ | |
| /* | |
| * HVC_SET_VECTORS - Set the value of the vbar_el2 register. | |
| * | |
| * @x1: Physical address of the new vector table. | |
| */ | |
| #define HVC_SET_VECTORS 0 | |
| /* | |
| * HVC_SOFT_RESTART - CPU soft reset, used by the cpu_soft_restart routine. | |
| */ | |
| #define HVC_SOFT_RESTART 1 | |
| /* | |
| * HVC_RESET_VECTORS - Restore the vectors to the original HYP stubs | |
| */ | |
| #define HVC_RESET_VECTORS 2 | |
| /* | |
| * HVC_FINALISE_EL2 - Upgrade the CPU from EL1 to EL2, if possible | |
| */ | |
| #define HVC_FINALISE_EL2 3 | |
| /* | |
| * HVC_GET_ICH_VTR_EL2 - Retrieve the ICH_VTR_EL2 value | |
| */ | |
| #define HVC_GET_ICH_VTR_EL2 4 | |
| /* Max number of HYP stub hypercalls */ | |
| #define HVC_STUB_HCALL_NR 5 | |
| /* Error returned when an invalid stub number is passed into x0 */ | |
| #define HVC_STUB_ERR 0xbadca11 | |
| #define BOOT_CPU_MODE_EL1 (0xe11) | |
| #define BOOT_CPU_MODE_EL2 (0xe12) | |
| /* | |
| * Flags returned together with the boot mode, but not preserved in | |
| * __boot_cpu_mode. Used by the idreg override code to work out the | |
| * boot state. | |
| */ | |
| #define BOOT_CPU_FLAG_E2H BIT_ULL(32) | |
| #ifndef __ASSEMBLER__ | |
| #include <asm/ptrace.h> | |
| #include <asm/sections.h> | |
| #include <asm/sysreg.h> | |
| #include <asm/cpufeature.h> | |
| /* | |
| * __boot_cpu_mode records what mode CPUs were booted in. | |
| * A correctly-implemented bootloader must start all CPUs in the same mode: | |
| * In this case, both 32bit halves of __boot_cpu_mode will contain the | |
| * same value (either BOOT_CPU_MODE_EL1 if booted in EL1, BOOT_CPU_MODE_EL2 if | |
| * booted in EL2). | |
| * | |
| * Should the bootloader fail to do this, the two values will be different. | |
| * This allows the kernel to flag an error when the secondaries have come up. | |
| */ | |
| extern u32 __boot_cpu_mode[2]; | |
| #define ARM64_VECTOR_TABLE_LEN SZ_2K | |
| void __hyp_set_vectors(phys_addr_t phys_vector_base); | |
| void __hyp_reset_vectors(void); | |
| bool is_kvm_arm_initialised(void); | |
| DECLARE_STATIC_KEY_FALSE(kvm_protected_mode_initialized); | |
| static inline bool is_pkvm_initialized(void) | |
| { | |
| return IS_ENABLED(CONFIG_KVM) && | |
| static_branch_likely(&kvm_protected_mode_initialized); | |
| } | |
| #ifdef CONFIG_KVM | |
| bool pkvm_force_reclaim_guest_page(phys_addr_t phys); | |
| #else | |
| static inline bool pkvm_force_reclaim_guest_page(phys_addr_t phys) | |
| { | |
| return false; | |
| } | |
| #endif | |
| /* Reports the availability of HYP mode */ | |
| static inline bool is_hyp_mode_available(void) | |
| { | |
| /* | |
| * If KVM protected mode is initialized, all CPUs must have been booted | |
| * in EL2. Avoid checking __boot_cpu_mode as CPUs now come up in EL1. | |
| */ | |
| if (is_pkvm_initialized()) | |
| return true; | |
| return (__boot_cpu_mode[0] == BOOT_CPU_MODE_EL2 && | |
| __boot_cpu_mode[1] == BOOT_CPU_MODE_EL2); | |
| } | |
| /* Check if the bootloader has booted CPUs in different modes */ | |
| static inline bool is_hyp_mode_mismatched(void) | |
| { | |
| /* | |
| * If KVM protected mode is initialized, all CPUs must have been booted | |
| * in EL2. Avoid checking __boot_cpu_mode as CPUs now come up in EL1. | |
| */ | |
| if (is_pkvm_initialized()) | |
| return false; | |
| return __boot_cpu_mode[0] != __boot_cpu_mode[1]; | |
| } | |
| static __always_inline bool is_kernel_in_hyp_mode(void) | |
| { | |
| BUILD_BUG_ON(__is_defined(__KVM_NVHE_HYPERVISOR__) || | |
| __is_defined(__KVM_VHE_HYPERVISOR__)); | |
| return read_sysreg(CurrentEL) == CurrentEL_EL2; | |
| } | |
| static __always_inline bool has_vhe(void) | |
| { | |
| /* | |
| * Code only run in VHE/NVHE hyp context can assume VHE is present or | |
| * absent. Otherwise fall back to caps. | |
| * This allows the compiler to discard VHE-specific code from the | |
| * nVHE object, reducing the number of external symbol references | |
| * needed to link. | |
| */ | |
| if (is_vhe_hyp_code()) | |
| return true; | |
| else if (is_nvhe_hyp_code()) | |
| return false; | |
| else | |
| return cpus_have_final_cap(ARM64_HAS_VIRT_HOST_EXTN); | |
| } | |
| static __always_inline bool is_protected_kvm_enabled(void) | |
| { | |
| if (is_vhe_hyp_code()) | |
| return false; | |
| else | |
| return cpus_have_final_cap(ARM64_KVM_PROTECTED_MODE); | |
| } | |
| static __always_inline bool has_hvhe(void) | |
| { | |
| if (is_vhe_hyp_code()) | |
| return false; | |
| return cpus_have_final_cap(ARM64_KVM_HVHE); | |
| } | |
| static inline bool is_hyp_nvhe(void) | |
| { | |
| return is_hyp_mode_available() && !is_kernel_in_hyp_mode(); | |
| } | |
| #endif /* __ASSEMBLER__ */ | |
| #endif /* ! __ASM__VIRT_H */ |