| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * arch/arm/mm/cache-xsc3l2.c - XScale3 L2 cache controller support | |
| * | |
| * Copyright (C) 2007 ARM Limited | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/highmem.h> | |
| #include <asm/cp15.h> | |
| #include <asm/cputype.h> | |
| #include <asm/cacheflush.h> | |
| #define CR_L2 (1 << 26) | |
| #define CACHE_LINE_SIZE 32 | |
| #define CACHE_LINE_SHIFT 5 | |
| #define CACHE_WAY_PER_SET 8 | |
| #define CACHE_WAY_SIZE(l2ctype) (8192 << (((l2ctype) >> 8) & 0xf)) | |
| #define CACHE_SET_SIZE(l2ctype) (CACHE_WAY_SIZE(l2ctype) >> CACHE_LINE_SHIFT) | |
| static inline int xsc3_l2_present(void) | |
| { | |
| unsigned long l2ctype; | |
| __asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype)); | |
| return !!(l2ctype & 0xf8); | |
| } | |
| static inline void xsc3_l2_clean_mva(unsigned long addr) | |
| { | |
| __asm__("mcr p15, 1, %0, c7, c11, 1" : : "r" (addr)); | |
| } | |
| static inline void xsc3_l2_inv_mva(unsigned long addr) | |
| { | |
| __asm__("mcr p15, 1, %0, c7, c7, 1" : : "r" (addr)); | |
| } | |
| static inline void xsc3_l2_inv_all(void) | |
| { | |
| unsigned long l2ctype, set_way; | |
| int set, way; | |
| __asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype)); | |
| for (set = 0; set < CACHE_SET_SIZE(l2ctype); set++) { | |
| for (way = 0; way < CACHE_WAY_PER_SET; way++) { | |
| set_way = (way << 29) | (set << 5); | |
| __asm__("mcr p15, 1, %0, c7, c11, 2" : : "r"(set_way)); | |
| } | |
| } | |
| dsb(); | |
| } | |
| static inline void l2_unmap_va(unsigned long va) | |
| { | |
| #ifdef CONFIG_HIGHMEM | |
| if (va != -1) | |
| kunmap_atomic((void *)va); | |
| #endif | |
| } | |
| static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va) | |
| { | |
| #ifdef CONFIG_HIGHMEM | |
| unsigned long va = prev_va & PAGE_MASK; | |
| unsigned long pa_offset = pa << (32 - PAGE_SHIFT); | |
| if (unlikely(pa_offset < (prev_va << (32 - PAGE_SHIFT)))) { | |
| /* | |
| * Switching to a new page. Because cache ops are | |
| * using virtual addresses only, we must put a mapping | |
| * in place for it. | |
| */ | |
| l2_unmap_va(prev_va); | |
| va = (unsigned long)kmap_atomic_pfn(pa >> PAGE_SHIFT); | |
| } | |
| return va + (pa_offset >> (32 - PAGE_SHIFT)); | |
| #else | |
| return __phys_to_virt(pa); | |
| #endif | |
| } | |
| static void xsc3_l2_inv_range(unsigned long start, unsigned long end) | |
| { | |
| unsigned long vaddr; | |
| if (start == 0 && end == -1ul) { | |
| xsc3_l2_inv_all(); | |
| return; | |
| } | |
| vaddr = -1; /* to force the first mapping */ | |
| /* | |
| * Clean and invalidate partial first cache line. | |
| */ | |
| if (start & (CACHE_LINE_SIZE - 1)) { | |
| vaddr = l2_map_va(start & ~(CACHE_LINE_SIZE - 1), vaddr); | |
| xsc3_l2_clean_mva(vaddr); | |
| xsc3_l2_inv_mva(vaddr); | |
| start = (start | (CACHE_LINE_SIZE - 1)) + 1; | |
| } | |
| /* | |
| * Invalidate all full cache lines between 'start' and 'end'. | |
| */ | |
| while (start < (end & ~(CACHE_LINE_SIZE - 1))) { | |
| vaddr = l2_map_va(start, vaddr); | |
| xsc3_l2_inv_mva(vaddr); | |
| start += CACHE_LINE_SIZE; | |
| } | |
| /* | |
| * Clean and invalidate partial last cache line. | |
| */ | |
| if (start < end) { | |
| vaddr = l2_map_va(start, vaddr); | |
| xsc3_l2_clean_mva(vaddr); | |
| xsc3_l2_inv_mva(vaddr); | |
| } | |
| l2_unmap_va(vaddr); | |
| dsb(); | |
| } | |
| static void xsc3_l2_clean_range(unsigned long start, unsigned long end) | |
| { | |
| unsigned long vaddr; | |
| vaddr = -1; /* to force the first mapping */ | |
| start &= ~(CACHE_LINE_SIZE - 1); | |
| while (start < end) { | |
| vaddr = l2_map_va(start, vaddr); | |
| xsc3_l2_clean_mva(vaddr); | |
| start += CACHE_LINE_SIZE; | |
| } | |
| l2_unmap_va(vaddr); | |
| dsb(); | |
| } | |
| /* | |
| * optimize L2 flush all operation by set/way format | |
| */ | |
| static inline void xsc3_l2_flush_all(void) | |
| { | |
| unsigned long l2ctype, set_way; | |
| int set, way; | |
| __asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype)); | |
| for (set = 0; set < CACHE_SET_SIZE(l2ctype); set++) { | |
| for (way = 0; way < CACHE_WAY_PER_SET; way++) { | |
| set_way = (way << 29) | (set << 5); | |
| __asm__("mcr p15, 1, %0, c7, c15, 2" : : "r"(set_way)); | |
| } | |
| } | |
| dsb(); | |
| } | |
| static void xsc3_l2_flush_range(unsigned long start, unsigned long end) | |
| { | |
| unsigned long vaddr; | |
| if (start == 0 && end == -1ul) { | |
| xsc3_l2_flush_all(); | |
| return; | |
| } | |
| vaddr = -1; /* to force the first mapping */ | |
| start &= ~(CACHE_LINE_SIZE - 1); | |
| while (start < end) { | |
| vaddr = l2_map_va(start, vaddr); | |
| xsc3_l2_clean_mva(vaddr); | |
| xsc3_l2_inv_mva(vaddr); | |
| start += CACHE_LINE_SIZE; | |
| } | |
| l2_unmap_va(vaddr); | |
| dsb(); | |
| } | |
| static int __init xsc3_l2_init(void) | |
| { | |
| if (!cpu_is_xsc3() || !xsc3_l2_present()) | |
| return 0; | |
| if (get_cr() & CR_L2) { | |
| pr_info("XScale3 L2 cache enabled.\n"); | |
| xsc3_l2_inv_all(); | |
| outer_cache.inv_range = xsc3_l2_inv_range; | |
| outer_cache.clean_range = xsc3_l2_clean_range; | |
| outer_cache.flush_range = xsc3_l2_flush_range; | |
| } | |
| return 0; | |
| } | |
| core_initcall(xsc3_l2_init); |