| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * Copyright (C) 2015-2016 Socionext Inc. | |
| * Author: Masahiro Yamada <yamada.masahiro@socionext.com> | |
| */ | |
| #define pr_fmt(fmt) "uniphier: " fmt | |
| #include <linux/bitops.h> | |
| #include <linux/init.h> | |
| #include <linux/io.h> | |
| #include <linux/log2.h> | |
| #include <linux/of_address.h> | |
| #include <linux/slab.h> | |
| #include <asm/hardware/cache-uniphier.h> | |
| #include <asm/outercache.h> | |
| /* control registers */ | |
| #define UNIPHIER_SSCC 0x0 /* Control Register */ | |
| #define UNIPHIER_SSCC_BST BIT(20) /* UCWG burst read */ | |
| #define UNIPHIER_SSCC_ACT BIT(19) /* Inst-Data separate */ | |
| #define UNIPHIER_SSCC_WTG BIT(18) /* WT gathering on */ | |
| #define UNIPHIER_SSCC_PRD BIT(17) /* enable pre-fetch */ | |
| #define UNIPHIER_SSCC_ON BIT(0) /* enable cache */ | |
| #define UNIPHIER_SSCLPDAWCR 0x30 /* Unified/Data Active Way Control */ | |
| #define UNIPHIER_SSCLPIAWCR 0x34 /* Instruction Active Way Control */ | |
| /* revision registers */ | |
| #define UNIPHIER_SSCID 0x0 /* ID Register */ | |
| /* operation registers */ | |
| #define UNIPHIER_SSCOPE 0x244 /* Cache Operation Primitive Entry */ | |
| #define UNIPHIER_SSCOPE_CM_INV 0x0 /* invalidate */ | |
| #define UNIPHIER_SSCOPE_CM_CLEAN 0x1 /* clean */ | |
| #define UNIPHIER_SSCOPE_CM_FLUSH 0x2 /* flush */ | |
| #define UNIPHIER_SSCOPE_CM_SYNC 0x8 /* sync (drain bufs) */ | |
| #define UNIPHIER_SSCOPE_CM_FLUSH_PREFETCH 0x9 /* flush p-fetch buf */ | |
| #define UNIPHIER_SSCOQM 0x248 /* Cache Operation Queue Mode */ | |
| #define UNIPHIER_SSCOQM_S_MASK (0x3 << 17) | |
| #define UNIPHIER_SSCOQM_S_RANGE (0x0 << 17) | |
| #define UNIPHIER_SSCOQM_S_ALL (0x1 << 17) | |
| #define UNIPHIER_SSCOQM_CE BIT(15) /* notify completion */ | |
| #define UNIPHIER_SSCOQM_CM_INV 0x0 /* invalidate */ | |
| #define UNIPHIER_SSCOQM_CM_CLEAN 0x1 /* clean */ | |
| #define UNIPHIER_SSCOQM_CM_FLUSH 0x2 /* flush */ | |
| #define UNIPHIER_SSCOQAD 0x24c /* Cache Operation Queue Address */ | |
| #define UNIPHIER_SSCOQSZ 0x250 /* Cache Operation Queue Size */ | |
| #define UNIPHIER_SSCOPPQSEF 0x25c /* Cache Operation Queue Set Complete*/ | |
| #define UNIPHIER_SSCOPPQSEF_FE BIT(1) | |
| #define UNIPHIER_SSCOPPQSEF_OE BIT(0) | |
| #define UNIPHIER_SSCOLPQS 0x260 /* Cache Operation Queue Status */ | |
| #define UNIPHIER_SSCOLPQS_EF BIT(2) | |
| #define UNIPHIER_SSCOLPQS_EST BIT(1) | |
| #define UNIPHIER_SSCOLPQS_QST BIT(0) | |
| /* Is the operation region specified by address range? */ | |
| #define UNIPHIER_SSCOQM_S_IS_RANGE(op) \ | |
| ((op & UNIPHIER_SSCOQM_S_MASK) == UNIPHIER_SSCOQM_S_RANGE) | |
| /** | |
| * struct uniphier_cache_data - UniPhier outer cache specific data | |
| * | |
| * @ctrl_base: virtual base address of control registers | |
| * @rev_base: virtual base address of revision registers | |
| * @op_base: virtual base address of operation registers | |
| * @way_ctrl_base: virtual address of the way control registers for this | |
| * SoC revision | |
| * @way_mask: each bit specifies if the way is present | |
| * @nsets: number of associativity sets | |
| * @line_size: line size in bytes | |
| * @range_op_max_size: max size that can be handled by a single range operation | |
| * @list: list node to include this level in the whole cache hierarchy | |
| */ | |
| struct uniphier_cache_data { | |
| void __iomem *ctrl_base; | |
| void __iomem *rev_base; | |
| void __iomem *op_base; | |
| void __iomem *way_ctrl_base; | |
| u32 way_mask; | |
| u32 nsets; | |
| u32 line_size; | |
| u32 range_op_max_size; | |
| struct list_head list; | |
| }; | |
| /* | |
| * List of the whole outer cache hierarchy. This list is only modified during | |
| * the early boot stage, so no mutex is taken for the access to the list. | |
| */ | |
| static LIST_HEAD(uniphier_cache_list); | |
| /** | |
| * __uniphier_cache_sync - perform a sync point for a particular cache level | |
| * | |
| * @data: cache controller specific data | |
| */ | |
| static void __uniphier_cache_sync(struct uniphier_cache_data *data) | |
| { | |
| /* This sequence need not be atomic. Do not disable IRQ. */ | |
| writel_relaxed(UNIPHIER_SSCOPE_CM_SYNC, | |
| data->op_base + UNIPHIER_SSCOPE); | |
| /* need a read back to confirm */ | |
| readl_relaxed(data->op_base + UNIPHIER_SSCOPE); | |
| } | |
| /** | |
| * __uniphier_cache_maint_common - run a queue operation for a particular level | |
| * | |
| * @data: cache controller specific data | |
| * @start: start address of range operation (don't care for "all" operation) | |
| * @size: data size of range operation (don't care for "all" operation) | |
| * @operation: flags to specify the desired cache operation | |
| */ | |
| static void __uniphier_cache_maint_common(struct uniphier_cache_data *data, | |
| unsigned long start, | |
| unsigned long size, | |
| u32 operation) | |
| { | |
| unsigned long flags; | |
| /* | |
| * No spin lock is necessary here because: | |
| * | |
| * [1] This outer cache controller is able to accept maintenance | |
| * operations from multiple CPUs at a time in an SMP system; if a | |
| * maintenance operation is under way and another operation is issued, | |
| * the new one is stored in the queue. The controller performs one | |
| * operation after another. If the queue is full, the status register, | |
| * UNIPHIER_SSCOPPQSEF, indicates that the queue registration has | |
| * failed. The status registers, UNIPHIER_{SSCOPPQSEF, SSCOLPQS}, have | |
| * different instances for each CPU, i.e. each CPU can track the status | |
| * of the maintenance operations triggered by itself. | |
| * | |
| * [2] The cache command registers, UNIPHIER_{SSCOQM, SSCOQAD, SSCOQSZ, | |
| * SSCOQWN}, are shared between multiple CPUs, but the hardware still | |
| * guarantees the registration sequence is atomic; the write access to | |
| * them are arbitrated by the hardware. The first accessor to the | |
| * register, UNIPHIER_SSCOQM, holds the access right and it is released | |
| * by reading the status register, UNIPHIER_SSCOPPQSEF. While one CPU | |
| * is holding the access right, other CPUs fail to register operations. | |
| * One CPU should not hold the access right for a long time, so local | |
| * IRQs should be disabled while the following sequence. | |
| */ | |
| local_irq_save(flags); | |
| /* clear the complete notification flag */ | |
| writel_relaxed(UNIPHIER_SSCOLPQS_EF, data->op_base + UNIPHIER_SSCOLPQS); | |
| do { | |
| /* set cache operation */ | |
| writel_relaxed(UNIPHIER_SSCOQM_CE | operation, | |
| data->op_base + UNIPHIER_SSCOQM); | |
| /* set address range if needed */ | |
| if (likely(UNIPHIER_SSCOQM_S_IS_RANGE(operation))) { | |
| writel_relaxed(start, data->op_base + UNIPHIER_SSCOQAD); | |
| writel_relaxed(size, data->op_base + UNIPHIER_SSCOQSZ); | |
| } | |
| } while (unlikely(readl_relaxed(data->op_base + UNIPHIER_SSCOPPQSEF) & | |
| (UNIPHIER_SSCOPPQSEF_FE | UNIPHIER_SSCOPPQSEF_OE))); | |
| /* wait until the operation is completed */ | |
| while (likely(readl_relaxed(data->op_base + UNIPHIER_SSCOLPQS) != | |
| UNIPHIER_SSCOLPQS_EF)) | |
| cpu_relax(); | |
| local_irq_restore(flags); | |
| } | |
| static void __uniphier_cache_maint_all(struct uniphier_cache_data *data, | |
| u32 operation) | |
| { | |
| __uniphier_cache_maint_common(data, 0, 0, | |
| UNIPHIER_SSCOQM_S_ALL | operation); | |
| __uniphier_cache_sync(data); | |
| } | |
| static void __uniphier_cache_maint_range(struct uniphier_cache_data *data, | |
| unsigned long start, unsigned long end, | |
| u32 operation) | |
| { | |
| unsigned long size; | |
| /* | |
| * If the start address is not aligned, | |
| * perform a cache operation for the first cache-line | |
| */ | |
| start = start & ~(data->line_size - 1); | |
| size = end - start; | |
| if (unlikely(size >= (unsigned long)(-data->line_size))) { | |
| /* this means cache operation for all range */ | |
| __uniphier_cache_maint_all(data, operation); | |
| return; | |
| } | |
| /* | |
| * If the end address is not aligned, | |
| * perform a cache operation for the last cache-line | |
| */ | |
| size = ALIGN(size, data->line_size); | |
| while (size) { | |
| unsigned long chunk_size = min_t(unsigned long, size, | |
| data->range_op_max_size); | |
| __uniphier_cache_maint_common(data, start, chunk_size, | |
| UNIPHIER_SSCOQM_S_RANGE | operation); | |
| start += chunk_size; | |
| size -= chunk_size; | |
| } | |
| __uniphier_cache_sync(data); | |
| } | |
| static void __uniphier_cache_enable(struct uniphier_cache_data *data, bool on) | |
| { | |
| u32 val = 0; | |
| if (on) | |
| val = UNIPHIER_SSCC_WTG | UNIPHIER_SSCC_PRD | UNIPHIER_SSCC_ON; | |
| writel_relaxed(val, data->ctrl_base + UNIPHIER_SSCC); | |
| } | |
| static void __init __uniphier_cache_set_active_ways( | |
| struct uniphier_cache_data *data) | |
| { | |
| unsigned int cpu; | |
| for_each_possible_cpu(cpu) | |
| writel_relaxed(data->way_mask, data->way_ctrl_base + 4 * cpu); | |
| } | |
| static void uniphier_cache_maint_range(unsigned long start, unsigned long end, | |
| u32 operation) | |
| { | |
| struct uniphier_cache_data *data; | |
| list_for_each_entry(data, &uniphier_cache_list, list) | |
| __uniphier_cache_maint_range(data, start, end, operation); | |
| } | |
| static void uniphier_cache_maint_all(u32 operation) | |
| { | |
| struct uniphier_cache_data *data; | |
| list_for_each_entry(data, &uniphier_cache_list, list) | |
| __uniphier_cache_maint_all(data, operation); | |
| } | |
| static void uniphier_cache_inv_range(unsigned long start, unsigned long end) | |
| { | |
| uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_INV); | |
| } | |
| static void uniphier_cache_clean_range(unsigned long start, unsigned long end) | |
| { | |
| uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_CLEAN); | |
| } | |
| static void uniphier_cache_flush_range(unsigned long start, unsigned long end) | |
| { | |
| uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_FLUSH); | |
| } | |
| static void __init uniphier_cache_inv_all(void) | |
| { | |
| uniphier_cache_maint_all(UNIPHIER_SSCOQM_CM_INV); | |
| } | |
| static void uniphier_cache_flush_all(void) | |
| { | |
| uniphier_cache_maint_all(UNIPHIER_SSCOQM_CM_FLUSH); | |
| } | |
| static void uniphier_cache_disable(void) | |
| { | |
| struct uniphier_cache_data *data; | |
| list_for_each_entry_reverse(data, &uniphier_cache_list, list) | |
| __uniphier_cache_enable(data, false); | |
| uniphier_cache_flush_all(); | |
| } | |
| static void __init uniphier_cache_enable(void) | |
| { | |
| struct uniphier_cache_data *data; | |
| uniphier_cache_inv_all(); | |
| list_for_each_entry(data, &uniphier_cache_list, list) { | |
| __uniphier_cache_enable(data, true); | |
| __uniphier_cache_set_active_ways(data); | |
| } | |
| } | |
| static void uniphier_cache_sync(void) | |
| { | |
| struct uniphier_cache_data *data; | |
| list_for_each_entry(data, &uniphier_cache_list, list) | |
| __uniphier_cache_sync(data); | |
| } | |
| static const struct of_device_id uniphier_cache_match[] __initconst = { | |
| { .compatible = "socionext,uniphier-system-cache" }, | |
| { /* sentinel */ } | |
| }; | |
| static int __init __uniphier_cache_init(struct device_node *np, | |
| unsigned int *cache_level) | |
| { | |
| struct uniphier_cache_data *data; | |
| u32 level, cache_size; | |
| struct device_node *next_np; | |
| int ret = 0; | |
| if (!of_match_node(uniphier_cache_match, np)) { | |
| pr_err("L%d: not compatible with uniphier cache\n", | |
| *cache_level); | |
| return -EINVAL; | |
| } | |
| if (of_property_read_u32(np, "cache-level", &level)) { | |
| pr_err("L%d: cache-level is not specified\n", *cache_level); | |
| return -EINVAL; | |
| } | |
| if (level != *cache_level) { | |
| pr_err("L%d: cache-level is unexpected value %d\n", | |
| *cache_level, level); | |
| return -EINVAL; | |
| } | |
| if (!of_property_read_bool(np, "cache-unified")) { | |
| pr_err("L%d: cache-unified is not specified\n", *cache_level); | |
| return -EINVAL; | |
| } | |
| data = kzalloc_obj(*data); | |
| if (!data) | |
| return -ENOMEM; | |
| if (of_property_read_u32(np, "cache-line-size", &data->line_size) || | |
| !is_power_of_2(data->line_size)) { | |
| pr_err("L%d: cache-line-size is unspecified or invalid\n", | |
| *cache_level); | |
| ret = -EINVAL; | |
| goto err; | |
| } | |
| if (of_property_read_u32(np, "cache-sets", &data->nsets) || | |
| !is_power_of_2(data->nsets)) { | |
| pr_err("L%d: cache-sets is unspecified or invalid\n", | |
| *cache_level); | |
| ret = -EINVAL; | |
| goto err; | |
| } | |
| if (of_property_read_u32(np, "cache-size", &cache_size) || | |
| cache_size == 0 || cache_size % (data->nsets * data->line_size)) { | |
| pr_err("L%d: cache-size is unspecified or invalid\n", | |
| *cache_level); | |
| ret = -EINVAL; | |
| goto err; | |
| } | |
| data->way_mask = GENMASK(cache_size / data->nsets / data->line_size - 1, | |
| 0); | |
| data->ctrl_base = of_iomap(np, 0); | |
| if (!data->ctrl_base) { | |
| pr_err("L%d: failed to map control register\n", *cache_level); | |
| ret = -ENOMEM; | |
| goto err; | |
| } | |
| data->rev_base = of_iomap(np, 1); | |
| if (!data->rev_base) { | |
| pr_err("L%d: failed to map revision register\n", *cache_level); | |
| ret = -ENOMEM; | |
| goto err; | |
| } | |
| data->op_base = of_iomap(np, 2); | |
| if (!data->op_base) { | |
| pr_err("L%d: failed to map operation register\n", *cache_level); | |
| ret = -ENOMEM; | |
| goto err; | |
| } | |
| data->way_ctrl_base = data->ctrl_base + 0xc00; | |
| if (*cache_level == 2) { | |
| u32 revision = readl(data->rev_base + UNIPHIER_SSCID); | |
| /* | |
| * The size of range operation is limited to (1 << 22) or less | |
| * for PH-sLD8 or older SoCs. | |
| */ | |
| if (revision <= 0x16) | |
| data->range_op_max_size = (u32)1 << 22; | |
| /* | |
| * Unfortunatly, the offset address of active way control base | |
| * varies from SoC to SoC. | |
| */ | |
| switch (revision) { | |
| case 0x11: /* sLD3 */ | |
| data->way_ctrl_base = data->ctrl_base + 0x870; | |
| break; | |
| case 0x12: /* LD4 */ | |
| case 0x16: /* sld8 */ | |
| data->way_ctrl_base = data->ctrl_base + 0x840; | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| data->range_op_max_size -= data->line_size; | |
| INIT_LIST_HEAD(&data->list); | |
| list_add_tail(&data->list, &uniphier_cache_list); /* no mutex */ | |
| /* | |
| * OK, this level has been successfully initialized. Look for the next | |
| * level cache. Do not roll back even if the initialization of the | |
| * next level cache fails because we want to continue with available | |
| * cache levels. | |
| */ | |
| next_np = of_find_next_cache_node(np); | |
| if (next_np) { | |
| (*cache_level)++; | |
| ret = __uniphier_cache_init(next_np, cache_level); | |
| } | |
| of_node_put(next_np); | |
| return ret; | |
| err: | |
| iounmap(data->op_base); | |
| iounmap(data->rev_base); | |
| iounmap(data->ctrl_base); | |
| kfree(data); | |
| return ret; | |
| } | |
| int __init uniphier_cache_init(void) | |
| { | |
| struct device_node *np = NULL; | |
| unsigned int cache_level; | |
| int ret = 0; | |
| /* look for level 2 cache */ | |
| while ((np = of_find_matching_node(np, uniphier_cache_match))) | |
| if (!of_property_read_u32(np, "cache-level", &cache_level) && | |
| cache_level == 2) | |
| break; | |
| if (!np) | |
| return -ENODEV; | |
| ret = __uniphier_cache_init(np, &cache_level); | |
| of_node_put(np); | |
| if (ret) { | |
| /* | |
| * Error out iif L2 initialization fails. Continue with any | |
| * error on L3 or outer because they are optional. | |
| */ | |
| if (cache_level == 2) { | |
| pr_err("failed to initialize L2 cache\n"); | |
| return ret; | |
| } | |
| cache_level--; | |
| ret = 0; | |
| } | |
| outer_cache.inv_range = uniphier_cache_inv_range; | |
| outer_cache.clean_range = uniphier_cache_clean_range; | |
| outer_cache.flush_range = uniphier_cache_flush_range; | |
| outer_cache.flush_all = uniphier_cache_flush_all; | |
| outer_cache.disable = uniphier_cache_disable; | |
| outer_cache.sync = uniphier_cache_sync; | |
| uniphier_cache_enable(); | |
| pr_info("enabled outer cache (cache level: %d)\n", cache_level); | |
| return ret; | |
| } |