| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * Versatile board support using the device tree | |
| * | |
| * Copyright (C) 2010 Secret Lab Technologies Ltd. | |
| * Copyright (C) 2009 Jeremy Kerr <jeremy.kerr@canonical.com> | |
| * Copyright (C) 2004 ARM Limited | |
| * Copyright (C) 2000 Deep Blue Solutions Ltd | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/io.h> | |
| #include <linux/of.h> | |
| #include <linux/of_address.h> | |
| #include <linux/of_irq.h> | |
| #include <linux/of_platform.h> | |
| #include <linux/slab.h> | |
| #include <linux/amba/bus.h> | |
| #include <linux/amba/mmci.h> | |
| #include <asm/mach-types.h> | |
| #include <asm/mach/arch.h> | |
| #include <asm/mach/map.h> | |
| /* macro to get at MMIO space when running virtually */ | |
| #define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) | |
| #define __io_address(n) ((void __iomem __force *)IO_ADDRESS(n)) | |
| /* | |
| * ------------------------------------------------------------------------ | |
| * Versatile Registers | |
| * ------------------------------------------------------------------------ | |
| */ | |
| #define VERSATILE_SYS_PCICTL_OFFSET 0x44 | |
| #define VERSATILE_SYS_MCI_OFFSET 0x48 | |
| /* | |
| * VERSATILE peripheral addresses | |
| */ | |
| #define VERSATILE_MMCI0_BASE 0x10005000 /* MMC interface */ | |
| #define VERSATILE_MMCI1_BASE 0x1000B000 /* MMC Interface */ | |
| #define VERSATILE_SCTL_BASE 0x101E0000 /* System controller */ | |
| /* | |
| * System controller bit assignment | |
| */ | |
| #define VERSATILE_REFCLK 0 | |
| #define VERSATILE_TIMCLK 1 | |
| #define VERSATILE_TIMER1_EnSel 15 | |
| #define VERSATILE_TIMER2_EnSel 17 | |
| #define VERSATILE_TIMER3_EnSel 19 | |
| #define VERSATILE_TIMER4_EnSel 21 | |
| static void __iomem *versatile_sys_base; | |
| static unsigned int mmc_status(struct device *dev) | |
| { | |
| struct amba_device *adev = container_of(dev, struct amba_device, dev); | |
| u32 mask; | |
| if (adev->res.start == VERSATILE_MMCI0_BASE) | |
| mask = 1; | |
| else | |
| mask = 2; | |
| return readl(versatile_sys_base + VERSATILE_SYS_MCI_OFFSET) & mask; | |
| } | |
| static struct mmci_platform_data mmc0_plat_data = { | |
| .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, | |
| .status = mmc_status, | |
| }; | |
| static struct mmci_platform_data mmc1_plat_data = { | |
| .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, | |
| .status = mmc_status, | |
| }; | |
| /* | |
| * Lookup table for attaching a specific name and platform_data pointer to | |
| * devices as they get created by of_platform_populate(). Ideally this table | |
| * would not exist, but the current clock implementation depends on some devices | |
| * having a specific name. | |
| */ | |
| struct of_dev_auxdata versatile_auxdata_lookup[] __initdata = { | |
| OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI0_BASE, "fpga:05", &mmc0_plat_data), | |
| OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI1_BASE, "fpga:0b", &mmc1_plat_data), | |
| {} | |
| }; | |
| static struct map_desc versatile_io_desc[] __initdata __maybe_unused = { | |
| { | |
| .virtual = IO_ADDRESS(VERSATILE_SCTL_BASE), | |
| .pfn = __phys_to_pfn(VERSATILE_SCTL_BASE), | |
| .length = SZ_4K * 9, | |
| .type = MT_DEVICE | |
| } | |
| }; | |
| static void __init versatile_map_io(void) | |
| { | |
| debug_ll_io_init(); | |
| iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc)); | |
| } | |
| static void __init versatile_init_early(void) | |
| { | |
| u32 val; | |
| /* | |
| * set clock frequency: | |
| * VERSATILE_REFCLK is 32KHz | |
| * VERSATILE_TIMCLK is 1MHz | |
| */ | |
| val = readl(__io_address(VERSATILE_SCTL_BASE)); | |
| writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | | |
| (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | | |
| (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | | |
| (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val, | |
| __io_address(VERSATILE_SCTL_BASE)); | |
| } | |
| static void __init versatile_dt_pci_init(void) | |
| { | |
| u32 val; | |
| struct device_node *np; | |
| struct property *newprop; | |
| np = of_find_compatible_node(NULL, NULL, "arm,versatile-pci"); | |
| if (!np) | |
| return; | |
| /* Check if PCI backplane is detected */ | |
| val = readl(versatile_sys_base + VERSATILE_SYS_PCICTL_OFFSET); | |
| if (val & 1) { | |
| /* | |
| * Enable PCI accesses. Note that the documentation is | |
| * inconsistent whether or not this is needed, but the old | |
| * driver had it so we will keep it. | |
| */ | |
| writel(1, versatile_sys_base + VERSATILE_SYS_PCICTL_OFFSET); | |
| goto out_put_node; | |
| } | |
| newprop = kzalloc_obj(*newprop); | |
| if (!newprop) | |
| goto out_put_node; | |
| newprop->name = kstrdup("status", GFP_KERNEL); | |
| newprop->value = kstrdup("disabled", GFP_KERNEL); | |
| newprop->length = sizeof("disabled"); | |
| of_update_property(np, newprop); | |
| pr_info("Not plugged into PCI backplane!\n"); | |
| out_put_node: | |
| of_node_put(np); | |
| } | |
| static void __init versatile_dt_init(void) | |
| { | |
| struct device_node *np; | |
| np = of_find_compatible_node(NULL, NULL, "arm,core-module-versatile"); | |
| if (np) | |
| versatile_sys_base = of_iomap(np, 0); | |
| WARN_ON(!versatile_sys_base); | |
| versatile_dt_pci_init(); | |
| of_platform_default_populate(NULL, versatile_auxdata_lookup, NULL); | |
| } | |
| static const char *const versatile_dt_match[] __initconst = { | |
| "arm,versatile-ab", | |
| "arm,versatile-pb", | |
| NULL, | |
| }; | |
| DT_MACHINE_START(VERSATILE_PB, "ARM-Versatile (Device Tree Support)") | |
| .map_io = versatile_map_io, | |
| .init_early = versatile_init_early, | |
| .init_machine = versatile_dt_init, | |
| .dt_compat = versatile_dt_match, | |
| MACHINE_END |