| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * linux/arch/arm/kernel/smp_scu.c | |
| * | |
| * Copyright (C) 2002 ARM Ltd. | |
| * All Rights Reserved | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/io.h> | |
| #include <asm/smp_plat.h> | |
| #include <asm/smp_scu.h> | |
| #include <asm/cacheflush.h> | |
| #include <asm/cputype.h> | |
| #define SCU_CTRL 0x00 | |
| #define SCU_ENABLE (1 << 0) | |
| #define SCU_STANDBY_ENABLE (1 << 5) | |
| #define SCU_CONFIG 0x04 | |
| #define SCU_CPU_STATUS 0x08 | |
| #define SCU_CPU_STATUS_MASK GENMASK(1, 0) | |
| #define SCU_INVALIDATE 0x0c | |
| #define SCU_FPGA_REVISION 0x10 | |
| #ifdef CONFIG_SMP | |
| /* | |
| * Get the number of CPU cores from the SCU configuration | |
| */ | |
| unsigned int __init scu_get_core_count(void __iomem *scu_base) | |
| { | |
| unsigned int ncores = readl_relaxed(scu_base + SCU_CONFIG); | |
| return (ncores & 0x03) + 1; | |
| } | |
| /* | |
| * Enable the SCU | |
| */ | |
| void scu_enable(void __iomem *scu_base) | |
| { | |
| u32 scu_ctrl; | |
| #ifdef CONFIG_ARM_ERRATA_764369 | |
| /* Cortex-A9 only */ | |
| if ((read_cpuid_id() & 0xff0ffff0) == 0x410fc090) { | |
| scu_ctrl = readl_relaxed(scu_base + 0x30); | |
| if (!(scu_ctrl & 1)) | |
| writel_relaxed(scu_ctrl | 0x1, scu_base + 0x30); | |
| } | |
| #endif | |
| scu_ctrl = readl_relaxed(scu_base + SCU_CTRL); | |
| /* already enabled? */ | |
| if (scu_ctrl & SCU_ENABLE) | |
| return; | |
| scu_ctrl |= SCU_ENABLE; | |
| /* Cortex-A9 earlier than r2p0 has no standby bit in SCU */ | |
| if ((read_cpuid_id() & 0xff0ffff0) == 0x410fc090 && | |
| (read_cpuid_id() & 0x00f0000f) >= 0x00200000) | |
| scu_ctrl |= SCU_STANDBY_ENABLE; | |
| writel_relaxed(scu_ctrl, scu_base + SCU_CTRL); | |
| /* | |
| * Ensure that the data accessed by CPU0 before the SCU was | |
| * initialised is visible to the other CPUs. | |
| */ | |
| flush_cache_all(); | |
| } | |
| #endif | |
| static int scu_set_power_mode_internal(void __iomem *scu_base, | |
| unsigned int logical_cpu, | |
| unsigned int mode) | |
| { | |
| unsigned int val; | |
| int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(logical_cpu), 0); | |
| if (mode > 3 || mode == 1 || cpu > 3) | |
| return -EINVAL; | |
| val = readb_relaxed(scu_base + SCU_CPU_STATUS + cpu); | |
| val &= ~SCU_CPU_STATUS_MASK; | |
| val |= mode; | |
| writeb_relaxed(val, scu_base + SCU_CPU_STATUS + cpu); | |
| return 0; | |
| } | |
| /* | |
| * Set the executing CPUs power mode as defined. This will be in | |
| * preparation for it executing a WFI instruction. | |
| * | |
| * This function must be called with preemption disabled, and as it | |
| * has the side effect of disabling coherency, caches must have been | |
| * flushed. Interrupts must also have been disabled. | |
| */ | |
| int scu_power_mode(void __iomem *scu_base, unsigned int mode) | |
| { | |
| return scu_set_power_mode_internal(scu_base, smp_processor_id(), mode); | |
| } | |
| /* | |
| * Set the given (logical) CPU's power mode to SCU_PM_NORMAL. | |
| */ | |
| int scu_cpu_power_enable(void __iomem *scu_base, unsigned int cpu) | |
| { | |
| return scu_set_power_mode_internal(scu_base, cpu, SCU_PM_NORMAL); | |
| } | |
| int scu_get_cpu_power_mode(void __iomem *scu_base, unsigned int logical_cpu) | |
| { | |
| unsigned int val; | |
| int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(logical_cpu), 0); | |
| if (cpu > 3) | |
| return -EINVAL; | |
| val = readb_relaxed(scu_base + SCU_CPU_STATUS + cpu); | |
| val &= SCU_CPU_STATUS_MASK; | |
| return val; | |
| } |