| .. SPDX-License-Identifier: GPL-2.0 | |
| Kernel driver mp5023 | |
| ==================== | |
| Supported chips: | |
| * MPS MP5023 | |
| Prefix: 'mp5023' | |
| * Datasheet | |
| Publicly available at the MPS website : https://www.monolithicpower.com/en/mp5023.html | |
| Author: | |
| Howard Chiu <howard.chiu@quantatw.com> | |
| Description | |
| ----------- | |
| This driver implements support for Monolithic Power Systems, Inc. (MPS) | |
| MP5023 Hot-Swap Controller. | |
| Device complaint with: | |
| - PMBus rev 1.3 interface. | |
| Device supports direct format for reading input voltage, output voltage, | |
| output current, input power and temperature. | |
| The driver exports the following attributes via the 'sysfs' files | |
| for input voltage: | |
| **in1_input** | |
| **in1_label** | |
| **in1_max** | |
| **in1_max_alarm** | |
| **in1_min** | |
| **in1_min_alarm** | |
| The driver provides the following attributes for output voltage: | |
| **in2_input** | |
| **in2_label** | |
| **in2_alarm** | |
| The driver provides the following attributes for output current: | |
| **curr1_input** | |
| **curr1_label** | |
| **curr1_alarm** | |
| **curr1_max** | |
| The driver provides the following attributes for input power: | |
| **power1_input** | |
| **power1_label** | |
| **power1_alarm** | |
| The driver provides the following attributes for temperature: | |
| **temp1_input** | |
| **temp1_max** | |
| **temp1_max_alarm** | |
| **temp1_crit** | |
| **temp1_crit_alarm** |