| /* SPDX-License-Identifier: MIT */ | |
| /* | |
| * Copyright © 2022 Intel Corporation | |
| */ | |
| /** | |
| * DOC: I915_PARAM_VM_BIND_VERSION | |
| * | |
| * VM_BIND feature version supported. | |
| * See typedef drm_i915_getparam_t param. | |
| * | |
| * Specifies the VM_BIND feature version supported. | |
| * The following versions of VM_BIND have been defined: | |
| * | |
| * 0: No VM_BIND support. | |
| * | |
| * 1: In VM_UNBIND calls, the UMD must specify the exact mappings created | |
| * previously with VM_BIND, the ioctl will not support unbinding multiple | |
| * mappings or splitting them. Similarly, VM_BIND calls will not replace | |
| * any existing mappings. | |
| * | |
| * 2: The restrictions on unbinding partial or multiple mappings is | |
| * lifted, Similarly, binding will replace any mappings in the given range. | |
| * | |
| * See struct drm_i915_gem_vm_bind and struct drm_i915_gem_vm_unbind. | |
| */ | |
| #define I915_PARAM_VM_BIND_VERSION 57 | |
| /** | |
| * DOC: I915_VM_CREATE_FLAGS_USE_VM_BIND | |
| * | |
| * Flag to opt-in for VM_BIND mode of binding during VM creation. | |
| * See struct drm_i915_gem_vm_control flags. | |
| * | |
| * The older execbuf2 ioctl will not support VM_BIND mode of operation. | |
| * For VM_BIND mode, we have new execbuf3 ioctl which will not accept any | |
| * execlist (See struct drm_i915_gem_execbuffer3 for more details). | |
| */ | |
| #define I915_VM_CREATE_FLAGS_USE_VM_BIND (1 << 0) | |
| /* VM_BIND related ioctls */ | |
| #define DRM_I915_GEM_VM_BIND 0x3d | |
| #define DRM_I915_GEM_VM_UNBIND 0x3e | |
| #define DRM_I915_GEM_EXECBUFFER3 0x3f | |
| #define DRM_IOCTL_I915_GEM_VM_BIND DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_VM_BIND, struct drm_i915_gem_vm_bind) | |
| #define DRM_IOCTL_I915_GEM_VM_UNBIND DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_VM_UNBIND, struct drm_i915_gem_vm_bind) | |
| #define DRM_IOCTL_I915_GEM_EXECBUFFER3 DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER3, struct drm_i915_gem_execbuffer3) | |
| /** | |
| * struct drm_i915_gem_timeline_fence - An input or output timeline fence. | |
| * | |
| * The operation will wait for input fence to signal. | |
| * | |
| * The returned output fence will be signaled after the completion of the | |
| * operation. | |
| */ | |
| struct drm_i915_gem_timeline_fence { | |
| /** @handle: User's handle for a drm_syncobj to wait on or signal. */ | |
| __u32 handle; | |
| /** | |
| * @flags: Supported flags are: | |
| * | |
| * I915_TIMELINE_FENCE_WAIT: | |
| * Wait for the input fence before the operation. | |
| * | |
| * I915_TIMELINE_FENCE_SIGNAL: | |
| * Return operation completion fence as output. | |
| */ | |
| __u32 flags; | |
| #define I915_TIMELINE_FENCE_WAIT (1 << 0) | |
| #define I915_TIMELINE_FENCE_SIGNAL (1 << 1) | |
| #define __I915_TIMELINE_FENCE_UNKNOWN_FLAGS (-(I915_TIMELINE_FENCE_SIGNAL << 1)) | |
| /** | |
| * @value: A point in the timeline. | |
| * Value must be 0 for a binary drm_syncobj. A Value of 0 for a | |
| * timeline drm_syncobj is invalid as it turns a drm_syncobj into a | |
| * binary one. | |
| */ | |
| __u64 value; | |
| }; | |
| /** | |
| * struct drm_i915_gem_vm_bind - VA to object mapping to bind. | |
| * | |
| * This structure is passed to VM_BIND ioctl and specifies the mapping of GPU | |
| * virtual address (VA) range to the section of an object that should be bound | |
| * in the device page table of the specified address space (VM). | |
| * The VA range specified must be unique (ie., not currently bound) and can | |
| * be mapped to whole object or a section of the object (partial binding). | |
| * Multiple VA mappings can be created to the same section of the object | |
| * (aliasing). | |
| * | |
| * The @start, @offset and @length must be 4K page aligned. However the DG2 has | |
| * 64K page size for device local memory and has compact page table. On that | |
| * platform, for binding device local-memory objects, the @start, @offset and | |
| * @length must be 64K aligned. Also, UMDs should not mix the local memory 64K | |
| * page and the system memory 4K page bindings in the same 2M range. | |
| * | |
| * Error code -EINVAL will be returned if @start, @offset and @length are not | |
| * properly aligned. In version 1 (See I915_PARAM_VM_BIND_VERSION), error code | |
| * -ENOSPC will be returned if the VA range specified can't be reserved. | |
| * | |
| * VM_BIND/UNBIND ioctl calls executed on different CPU threads concurrently | |
| * are not ordered. Furthermore, parts of the VM_BIND operation can be done | |
| * asynchronously, if valid @fence is specified. | |
| */ | |
| struct drm_i915_gem_vm_bind { | |
| /** @vm_id: VM (address space) id to bind */ | |
| __u32 vm_id; | |
| /** @handle: Object handle */ | |
| __u32 handle; | |
| /** @start: Virtual Address start to bind */ | |
| __u64 start; | |
| /** @offset: Offset in object to bind */ | |
| __u64 offset; | |
| /** @length: Length of mapping to bind */ | |
| __u64 length; | |
| /** | |
| * @flags: Supported flags are: | |
| * | |
| * I915_GEM_VM_BIND_CAPTURE: | |
| * Capture this mapping in the dump upon GPU error. | |
| * | |
| * Note that @fence carries its own flags. | |
| */ | |
| __u64 flags; | |
| #define I915_GEM_VM_BIND_CAPTURE (1 << 0) | |
| /** | |
| * @fence: Timeline fence for bind completion signaling. | |
| * | |
| * Timeline fence is of format struct drm_i915_gem_timeline_fence. | |
| * | |
| * It is an out fence, hence using I915_TIMELINE_FENCE_WAIT flag | |
| * is invalid, and an error will be returned. | |
| * | |
| * If I915_TIMELINE_FENCE_SIGNAL flag is not set, then out fence | |
| * is not requested and binding is completed synchronously. | |
| */ | |
| struct drm_i915_gem_timeline_fence fence; | |
| /** | |
| * @extensions: Zero-terminated chain of extensions. | |
| * | |
| * For future extensions. See struct i915_user_extension. | |
| */ | |
| __u64 extensions; | |
| }; | |
| /** | |
| * struct drm_i915_gem_vm_unbind - VA to object mapping to unbind. | |
| * | |
| * This structure is passed to VM_UNBIND ioctl and specifies the GPU virtual | |
| * address (VA) range that should be unbound from the device page table of the | |
| * specified address space (VM). VM_UNBIND will force unbind the specified | |
| * range from device page table without waiting for any GPU job to complete. | |
| * It is UMDs responsibility to ensure the mapping is no longer in use before | |
| * calling VM_UNBIND. | |
| * | |
| * If the specified mapping is not found, the ioctl will simply return without | |
| * any error. | |
| * | |
| * VM_BIND/UNBIND ioctl calls executed on different CPU threads concurrently | |
| * are not ordered. Furthermore, parts of the VM_UNBIND operation can be done | |
| * asynchronously, if valid @fence is specified. | |
| */ | |
| struct drm_i915_gem_vm_unbind { | |
| /** @vm_id: VM (address space) id to bind */ | |
| __u32 vm_id; | |
| /** @rsvd: Reserved, MBZ */ | |
| __u32 rsvd; | |
| /** @start: Virtual Address start to unbind */ | |
| __u64 start; | |
| /** @length: Length of mapping to unbind */ | |
| __u64 length; | |
| /** | |
| * @flags: Currently reserved, MBZ. | |
| * | |
| * Note that @fence carries its own flags. | |
| */ | |
| __u64 flags; | |
| /** | |
| * @fence: Timeline fence for unbind completion signaling. | |
| * | |
| * Timeline fence is of format struct drm_i915_gem_timeline_fence. | |
| * | |
| * It is an out fence, hence using I915_TIMELINE_FENCE_WAIT flag | |
| * is invalid, and an error will be returned. | |
| * | |
| * If I915_TIMELINE_FENCE_SIGNAL flag is not set, then out fence | |
| * is not requested and unbinding is completed synchronously. | |
| */ | |
| struct drm_i915_gem_timeline_fence fence; | |
| /** | |
| * @extensions: Zero-terminated chain of extensions. | |
| * | |
| * For future extensions. See struct i915_user_extension. | |
| */ | |
| __u64 extensions; | |
| }; | |
| /** | |
| * struct drm_i915_gem_execbuffer3 - Structure for DRM_I915_GEM_EXECBUFFER3 | |
| * ioctl. | |
| * | |
| * DRM_I915_GEM_EXECBUFFER3 ioctl only works in VM_BIND mode and VM_BIND mode | |
| * only works with this ioctl for submission. | |
| * See I915_VM_CREATE_FLAGS_USE_VM_BIND. | |
| */ | |
| struct drm_i915_gem_execbuffer3 { | |
| /** | |
| * @ctx_id: Context id | |
| * | |
| * Only contexts with user engine map are allowed. | |
| */ | |
| __u32 ctx_id; | |
| /** | |
| * @engine_idx: Engine index | |
| * | |
| * An index in the user engine map of the context specified by @ctx_id. | |
| */ | |
| __u32 engine_idx; | |
| /** | |
| * @batch_address: Batch gpu virtual address/es. | |
| * | |
| * For normal submission, it is the gpu virtual address of the batch | |
| * buffer. For parallel submission, it is a pointer to an array of | |
| * batch buffer gpu virtual addresses with array size equal to the | |
| * number of (parallel) engines involved in that submission (See | |
| * struct i915_context_engines_parallel_submit). | |
| */ | |
| __u64 batch_address; | |
| /** @flags: Currently reserved, MBZ */ | |
| __u64 flags; | |
| /** @rsvd1: Reserved, MBZ */ | |
| __u32 rsvd1; | |
| /** @fence_count: Number of fences in @timeline_fences array. */ | |
| __u32 fence_count; | |
| /** | |
| * @timeline_fences: Pointer to an array of timeline fences. | |
| * | |
| * Timeline fences are of format struct drm_i915_gem_timeline_fence. | |
| */ | |
| __u64 timeline_fences; | |
| /** @rsvd2: Reserved, MBZ */ | |
| __u64 rsvd2; | |
| /** | |
| * @extensions: Zero-terminated chain of extensions. | |
| * | |
| * For future extensions. See struct i915_user_extension. | |
| */ | |
| __u64 extensions; | |
| }; | |
| /** | |
| * struct drm_i915_gem_create_ext_vm_private - Extension to make the object | |
| * private to the specified VM. | |
| * | |
| * See struct drm_i915_gem_create_ext. | |
| */ | |
| struct drm_i915_gem_create_ext_vm_private { | |
| #define I915_GEM_CREATE_EXT_VM_PRIVATE 2 | |
| /** @base: Extension link. See struct i915_user_extension. */ | |
| struct i915_user_extension base; | |
| /** @vm_id: Id of the VM to which the object is private */ | |
| __u32 vm_id; | |
| }; |