Documentation/filesystems/mount_api.rst

.. SPDX-License-Identifier: GPL-2.0

====================
Filesystem Mount API
====================

.. CONTENTS

 (1) Overview.

 (2) The filesystem context.

 (3) The filesystem context operations.

 (4) Filesystem context security.

 (5) VFS filesystem context API.

 (6) Superblock creation helpers.

 (7) Parameter description.

 (8) Parameter helper functions.


Overview
========

The creation of new mounts is now to be done in a multistep process:

 (1) Create a filesystem context.

 (2) Parse the parameters and attach them to the context.  Parameters are
     expected to be passed individually from userspace, though legacy binary
     parameters can also be handled.

 (3) Validate and pre-process the context.

 (4) Get or create a superblock and mountable root.

 (5) Perform the mount.

 (6) Return an error message attached to the context.

 (7) Destroy the context.

To support this, the file_system_type struct gains two new fields::

	int (*init_fs_context)(struct fs_context *fc);
	const struct fs_parameter_description *parameters;

The first is invoked to set up the filesystem-specific parts of a filesystem
context, including the additional space, and the second points to the
parameter description for validation at registration time and querying by a
future system call.

Note that security initialisation is done *after* the filesystem is called so
that the namespaces may be adjusted first.


The Filesystem context
======================

The creation and reconfiguration of a superblock is governed by a filesystem
context.  This is represented by the fs_context structure::

	struct fs_context {
		const struct fs_context_operations *ops;
		struct file_system_type *fs_type;
		void			*fs_private;
		struct dentry		*root;
		struct user_namespace	*user_ns;
		struct net		*net_ns;
		const struct cred	*cred;
		char			*source;
		char			*subtype;
		void			*security;
		void			*s_fs_info;
		unsigned int		sb_flags;
		unsigned int		sb_flags_mask;
		unsigned int		s_iflags;
		enum fs_context_purpose	purpose:8;
		...
	};

The fs_context fields are as follows:

   * ::

       const struct fs_context_operations *ops

     These are operations that can be done on a filesystem context (see
     below).  This must be set by the ->init_fs_context() file_system_type
     operation.

   * ::

       struct file_system_type *fs_type

     A pointer to the file_system_type of the filesystem that is being
     constructed or reconfigured.  This retains a reference on the type owner.

   * ::

       void *fs_private

     A pointer to the file system's private data.  This is where the filesystem
     will need to store any options it parses.

   * ::

       struct dentry *root

     A pointer to the root of the mountable tree (and indirectly, the
     superblock thereof).  This is filled in by the ->get_tree() op.  If this
     is set, an active reference on root->d_sb must also be held.

   * ::

       struct user_namespace *user_ns
       struct net *net_ns

     There are a subset of the namespaces in use by the invoking process.  They
     retain references on each namespace.  The subscribed namespaces may be
     replaced by the filesystem to reflect other sources, such as the parent
     mount superblock on an automount.

   * ::

       const struct cred *cred

     The mounter's credentials.  This retains a reference on the credentials.

   * ::

       char *source

     This specifies the source.  It may be a block device (e.g. /dev/sda1) or
     something more exotic, such as the "host:/path" that NFS desires.

   * ::

       char *subtype

     This is a string to be added to the type displayed in /proc/mounts to
     qualify it (used by FUSE).  This is available for the filesystem to set if
     desired.

   * ::

       void *security

     A place for the LSMs to hang their security data for the superblock.  The
     relevant security operations are described below.

   * ::

       void *s_fs_info

     The proposed s_fs_info for a new superblock, set in the superblock by
     sget_fc().  This can be used to distinguish superblocks.

   * ::

       unsigned int sb_flags
       unsigned int sb_flags_mask

     Which bits SB_* flags are to be set/cleared in super_block::s_flags.

   * ::

       unsigned int s_iflags

     These will be bitwise-OR'd with s->s_iflags when a superblock is created.

   * ::

       enum fs_context_purpose

     This indicates the purpose for which the context is intended.  The
     available values are:

	==========================	======================================
	FS_CONTEXT_FOR_MOUNT,		New superblock for explicit mount
	FS_CONTEXT_FOR_SUBMOUNT		New automatic submount of extant mount
	FS_CONTEXT_FOR_RECONFIGURE	Change an existing mount
	==========================	======================================

The mount context is created by calling vfs_new_fs_context() or
vfs_dup_fs_context() and is destroyed with put_fs_context().  Note that the
structure is not refcounted.

VFS, security and filesystem mount options are set individually with
vfs_parse_mount_option().  Options provided by the old mount(2) system call as
a page of data can be parsed with generic_parse_monolithic().

When mounting, the filesystem is allowed to take data from any of the pointers
and attach it to the superblock (or whatever), provided it clears the pointer
in the mount context.

The filesystem is also allowed to allocate resources and pin them with the
mount context.  For instance, NFS might pin the appropriate protocol version
module.


The Filesystem Context Operations
=================================

The filesystem context points to a table of operations::

	struct fs_context_operations {
		void (*free)(struct fs_context *fc);
		int (*dup)(struct fs_context *fc, struct fs_context *src_fc);
		int (*parse_param)(struct fs_context *fc,
				   struct fs_parameter *param);
		int (*parse_monolithic)(struct fs_context *fc, void *data);
		int (*get_tree)(struct fs_context *fc);
		int (*reconfigure)(struct fs_context *fc);
	};

These operations are invoked by the various stages of the mount procedure to
manage the filesystem context.  They are as follows:

   * ::

	void (*free)(struct fs_context *fc);

     Called to clean up the filesystem-specific part of the filesystem context
     when the context is destroyed.  It should be aware that parts of the
     context may have been removed and NULL'd out by ->get_tree().

   * ::

	int (*dup)(struct fs_context *fc, struct fs_context *src_fc);

     Called when a filesystem context has been duplicated to duplicate the
     filesystem-private data.  An error may be returned to indicate failure to
     do this.

     .. Warning::

         Note that even if this fails, put_fs_context() will be called
	 immediately thereafter, so ->dup() *must* make the
	 filesystem-private data safe for ->free().

   * ::

	int (*parse_param)(struct fs_context *fc,
			   struct fs_parameter *param);

     Called when a parameter is being added to the filesystem context.  param
     points to the key name and maybe a value object.  VFS-specific options
     will have been weeded out and fc->sb_flags updated in the context.
     Security options will also have been weeded out and fc->security updated.

     The parameter can be parsed with fs_parse() and fs_lookup_param().  Note
     that the source(s) are presented as parameters named "source".

     If successful, 0 should be returned or a negative error code otherwise.

   * ::

	int (*parse_monolithic)(struct fs_context *fc, void *data);

     Called when the mount(2) system call is invoked to pass the entire data
     page in one go.  If this is expected to be just a list of "key[=val]"
     items separated by commas, then this may be set to NULL.

     The return value is as for ->parse_param().

     If the filesystem (e.g. NFS) needs to examine the data first and then
     finds it's the standard key-val list then it may pass it off to
     generic_parse_monolithic().

   * ::

	int (*get_tree)(struct fs_context *fc);

     Called to get or create the mountable root and superblock, using the
     information stored in the filesystem context (reconfiguration goes via a
     different vector).  It may detach any resources it desires from the
     filesystem context and transfer them to the superblock it creates.

     On success it should set fc->root to the mountable root and return 0.  In
     the case of an error, it should return a negative error code.

     The phase on a userspace-driven context will be set to only allow this to
     be called once on any particular context.

   * ::

	int (*reconfigure)(struct fs_context *fc);

     Called to effect reconfiguration of a superblock using information stored
     in the filesystem context.  It may detach any resources it desires from
     the filesystem context and transfer them to the superblock.  The
     superblock can be found from fc->root->d_sb.

     On success it should return 0.  In the case of an error, it should return
     a negative error code.


Filesystem context Security
===========================

The filesystem context contains a security pointer that the LSMs can use for
building up a security context for the superblock to be mounted.  There are a
number of operations used by the new mount code for this purpose:

   * ::

	int security_fs_context_alloc(struct fs_context *fc,
				      struct dentry *reference);

     Called to initialise fc->security (which is preset to NULL) and allocate
     any resources needed.  It should return 0 on success or a negative error
     code on failure.

     reference will be non-NULL if the context is being created for superblock
     reconfiguration (FS_CONTEXT_FOR_RECONFIGURE) in which case it indicates
     the root dentry of the superblock to be reconfigured.  It will also be
     non-NULL in the case of a submount (FS_CONTEXT_FOR_SUBMOUNT) in which case
     it indicates the automount point.

   * ::

	int security_fs_context_dup(struct fs_context *fc,
				    struct fs_context *src_fc);

     Called to initialise fc->security (which is preset to NULL) and allocate
     any resources needed.  The original filesystem context is pointed to by
     src_fc and may be used for reference.  It should return 0 on success or a
     negative error code on failure.

   * ::

	void security_fs_context_free(struct fs_context *fc);

     Called to clean up anything attached to fc->security.  Note that the
     contents may have been transferred to a superblock and the pointer cleared
     during get_tree.

   * ::

	int security_fs_context_parse_param(struct fs_context *fc,
					    struct fs_parameter *param);

     Called for each mount parameter, including the source.  The arguments are
     as for the ->parse_param() method.  It should return 0 to indicate that
     the parameter should be passed on to the filesystem, 1 to indicate that
     the parameter should be discarded or an error to indicate that the
     parameter should be rejected.

     The value pointed to by param may be modified (if a string) or stolen
     (provided the value pointer is NULL'd out).  If it is stolen, 1 must be
     returned to prevent it being passed to the filesystem.

   * ::

	int security_fs_context_validate(struct fs_context *fc);

     Called after all the options have been parsed to validate the collection
     as a whole and to do any necessary allocation so that
     security_sb_get_tree() and security_sb_reconfigure() are less likely to
     fail.  It should return 0 or a negative error code.

     In the case of reconfiguration, the target superblock will be accessible
     via fc->root.

   * ::

	int security_sb_get_tree(struct fs_context *fc);

     Called during the mount procedure to verify that the specified superblock
     is allowed to be mounted and to transfer the security data there.  It
     should return 0 or a negative error code.

   * ::

	void security_sb_reconfigure(struct fs_context *fc);

     Called to apply any reconfiguration to an LSM's context.  It must not
     fail.  Error checking and resource allocation must be done in advance by
     the parameter parsing and validation hooks.

   * ::

	int security_sb_mountpoint(struct fs_context *fc,
			           struct path *mountpoint,
				   unsigned int mnt_flags);

     Called during the mount procedure to verify that the root dentry attached
     to the context is permitted to be attached to the specified mountpoint.
     It should return 0 on success or a negative error code on failure.


VFS Filesystem context API
==========================

There are four operations for creating a filesystem context and one for
destroying a context:

   * ::

       struct fs_context *fs_context_for_mount(struct file_system_type *fs_type,
					       unsigned int sb_flags);

     Allocate a filesystem context for the purpose of setting up a new mount,
     whether that be with a new superblock or sharing an existing one.  This
     sets the superblock flags, initialises the security and calls
     fs_type->init_fs_context() to initialise the filesystem private data.

     fs_type specifies the filesystem type that will manage the context and
     sb_flags presets the superblock flags stored therein.

   * ::

       struct fs_context *fs_context_for_reconfigure(
		struct dentry *dentry,
		unsigned int sb_flags,
		unsigned int sb_flags_mask);

     Allocate a filesystem context for the purpose of reconfiguring an
     existing superblock.  dentry provides a reference to the superblock to be
     configured.  sb_flags and sb_flags_mask indicate which superblock flags
     need changing and to what.

   * ::

       struct fs_context *fs_context_for_submount(
		struct file_system_type *fs_type,
		struct dentry *reference);

     Allocate a filesystem context for the purpose of creating a new mount for
     an automount point or other derived superblock.  fs_type specifies the
     filesystem type that will manage the context and the reference dentry
     supplies the parameters.  Namespaces are propagated from the reference
     dentry's superblock also.

     Note that it's not a requirement that the reference dentry be of the same
     filesystem type as fs_type.

   * ::

        struct fs_context *vfs_dup_fs_context(struct fs_context *src_fc);

     Duplicate a filesystem context, copying any options noted and duplicating
     or additionally referencing any resources held therein.  This is available
     for use where a filesystem has to get a mount within a mount, such as NFS4
     does by internally mounting the root of the target server and then doing a
     private pathwalk to the target directory.

     The purpose in the new context is inherited from the old one.

   * ::

       void put_fs_context(struct fs_context *fc);

     Destroy a filesystem context, releasing any resources it holds.  This
     calls the ->free() operation.  This is intended to be called by anyone who
     created a filesystem context.

     .. Warning::

        filesystem contexts are not refcounted, so this causes unconditional
	destruction.

In all the above operations, apart from the put op, the return is a mount
context pointer or a negative error code.

For the remaining operations, if an error occurs, a negative error code will be
returned.

   * ::

        int vfs_parse_fs_param(struct fs_context *fc,
			       struct fs_parameter *param);

     Supply a single mount parameter to the filesystem context.  This includes
     the specification of the source/device which is specified as the "source"
     parameter (which may be specified multiple times if the filesystem
     supports that).

     param specifies the parameter key name and the value.  The parameter is
     first checked to see if it corresponds to a standard mount flag (in which
     case it is used to set an SB_xxx flag and consumed) or a security option
     (in which case the LSM consumes it) before it is passed on to the
     filesystem.

     The parameter value is typed and can be one of:

	====================		=============================
	fs_value_is_flag		Parameter not given a value
	fs_value_is_string		Value is a string
	fs_value_is_blob		Value is a binary blob
	fs_value_is_filename		Value is a filename* + dirfd
	fs_value_is_file		Value is an open file (file*)
	====================		=============================

     If there is a value, that value is stored in a union in the struct in one
     of param->{string,blob,name,file}.  Note that the function may steal and
     clear the pointer, but then becomes responsible for disposing of the
     object.

   * ::

       int vfs_parse_fs_qstr(struct fs_context *fc, const char *key,
			       const struct qstr *value);

     A wrapper around vfs_parse_fs_param() that copies the value string it is
     passed.

   * ::

       int vfs_parse_fs_string(struct fs_context *fc, const char *key,
			       const char *value);

     A wrapper around vfs_parse_fs_param() that copies the value string it is
     passed.

   * ::

       int generic_parse_monolithic(struct fs_context *fc, void *data);

     Parse a sys_mount() data page, assuming the form to be a text list
     consisting of key[=val] options separated by commas.  Each item in the
     list is passed to vfs_mount_option().  This is the default when the
     ->parse_monolithic() method is NULL.

   * ::

       int vfs_get_tree(struct fs_context *fc);

     Get or create the mountable root and superblock, using the parameters in
     the filesystem context to select/configure the superblock.  This invokes
     the ->get_tree() method.

   * ::

       struct vfsmount *vfs_create_mount(struct fs_context *fc);

     Create a mount given the parameters in the specified filesystem context.
     Note that this does not attach the mount to anything.


Superblock Creation Helpers
===========================

A number of VFS helpers are available for use by filesystems for the creation
or looking up of superblocks.

   * ::

       struct super_block *
       sget_fc(struct fs_context *fc,
	       int (*test)(struct super_block *sb, struct fs_context *fc),
	       int (*set)(struct super_block *sb, struct fs_context *fc));

     This is the core routine.  If test is non-NULL, it searches for an
     existing superblock matching the criteria held in the fs_context, using
     the test function to match them.  If no match is found, a new superblock
     is created and the set function is called to set it up.

     Prior to the set function being called, fc->s_fs_info will be transferred
     to sb->s_fs_info - and fc->s_fs_info will be cleared if set returns
     success (ie. 0).

The following helpers all wrap sget_fc():

	(1) vfs_get_single_super

	    Only one such superblock may exist in the system.  Any further
	    attempt to get a new superblock gets this one (and any parameter
	    differences are ignored).

	(2) vfs_get_keyed_super

	    Multiple superblocks of this type may exist and they're keyed on
	    their s_fs_info pointer (for example this may refer to a
	    namespace).

	(3) vfs_get_independent_super

	    Multiple independent superblocks of this type may exist.  This
	    function never matches an existing one and always creates a new
	    one.


Parameter Description
=====================

Parameters are described using structures defined in linux/fs_parser.h.
There's a core description struct that links everything together::

	struct fs_parameter_description {
		const struct fs_parameter_spec *specs;
		const struct fs_parameter_enum *enums;
	};

For example::

	enum {
		Opt_autocell,
		Opt_bar,
		Opt_dyn,
		Opt_foo,
		Opt_source,
	};

	static const struct fs_parameter_description afs_fs_parameters = {
		.specs		= afs_param_specs,
		.enums		= afs_param_enums,
	};

The members are as follows:

 (1) ::

       const struct fs_parameter_specification *specs;

     Table of parameter specifications, terminated with a null entry, where the
     entries are of type::

	struct fs_parameter_spec {
		const char		*name;
		u8			opt;
		enum fs_parameter_type	type:8;
		unsigned short		flags;
	};

     The 'name' field is a string to match exactly to the parameter key (no
     wildcards, patterns and no case-independence) and 'opt' is the value that
     will be returned by the fs_parser() function in the case of a successful
     match.

     The 'type' field indicates the desired value type and must be one of:

	=======================	=======================	=====================
	TYPE NAME		EXPECTED VALUE		RESULT IN
	=======================	=======================	=====================
	fs_param_is_flag	No value		n/a
	fs_param_is_bool	Boolean value		result->boolean
	fs_param_is_u32		32-bit unsigned int	result->uint_32
	fs_param_is_u32_octal	32-bit octal int	result->uint_32
	fs_param_is_u32_hex	32-bit hex int		result->uint_32
	fs_param_is_s32		32-bit signed int	result->int_32
	fs_param_is_u64		64-bit unsigned int	result->uint_64
	fs_param_is_enum	Enum value name 	result->uint_32
	fs_param_is_string	Arbitrary string	param->string
	fs_param_is_blockdev	Blockdev path		* Needs lookup
	fs_param_is_fd		File descriptor		result->int_32
	fs_param_is_uid		User ID (u32)           result->uid
	fs_param_is_gid		Group ID (u32)          result->gid
	=======================	=======================	=====================

     Note that if the value is of fs_param_is_bool type, fs_parse() will try
     to match any string value against "0", "1", "no", "yes", "false", "true".

     Each parameter can also be qualified with 'flags':

	=======================	================================================
	fs_param_v_optional	The value is optional
	fs_param_neg_with_no	result->negated set if key is prefixed with "no"
	fs_param_neg_with_empty	result->negated set if value is ""
	fs_param_deprecated	The parameter is deprecated.
	=======================	================================================

     These are wrapped with a number of convenience wrappers:

	=======================	===============================================
	MACRO			SPECIFIES
	=======================	===============================================
	fsparam_flag()		fs_param_is_flag
	fsparam_flag_no()	fs_param_is_flag, fs_param_neg_with_no
	fsparam_bool()		fs_param_is_bool
	fsparam_u32()		fs_param_is_u32
	fsparam_u32oct()	fs_param_is_u32_octal
	fsparam_s32()		fs_param_is_s32
	fsparam_u64()		fs_param_is_u64
	fsparam_enum()		fs_param_is_enum
	fsparam_string()	fs_param_is_string
	fsparam_bdev()		fs_param_is_blockdev
	fsparam_fd()		fs_param_is_fd
	fsparam_uid()		fs_param_is_uid
	fsparam_gid()		fs_param_is_gid
	=======================	===============================================

     all of which take two arguments, name string and option number - for
     example::

	static const struct fs_parameter_spec afs_param_specs[] = {
		fsparam_flag	("autocell",	Opt_autocell),
		fsparam_flag	("dyn",		Opt_dyn),
		fsparam_string	("source",	Opt_source),
		fsparam_flag_no	("foo",		Opt_foo),
		{}
	};

     An addition macro, __fsparam() is provided that takes an additional pair
     of arguments to specify the type and the flags for anything that doesn't
     match one of the above macros.

 (2) ::

       const struct fs_parameter_enum *enums;

     Table of enum value names to integer mappings, terminated with a null
     entry.  This is of type::

	struct fs_parameter_enum {
		u8		opt;
		char		name[14];
		u8		value;
	};

     Where the array is an unsorted list of { parameter ID, name }-keyed
     elements that indicate the value to map to, e.g.::

	static const struct fs_parameter_enum afs_param_enums[] = {
		{ Opt_bar,   "x",      1},
		{ Opt_bar,   "y",      23},
		{ Opt_bar,   "z",      42},
	};

     If a parameter of type fs_param_is_enum is encountered, fs_parse() will
     try to look the value up in the enum table and the result will be stored
     in the parse result.

The parser should be pointed to by the parser pointer in the file_system_type
struct as this will provide validation on registration (if
CONFIG_VALIDATE_FS_PARSER=y) and will allow the description to be queried from
userspace using the fsinfo() syscall.


Parameter Helper Functions
==========================

A number of helper functions are provided to help a filesystem or an LSM
process the parameters it is given.

   * ::

       int lookup_constant(const struct constant_table tbl[],
			   const char *name, int not_found);

     Look up a constant by name in a table of name -> integer mappings.  The
     table is an array of elements of the following type::

	struct constant_table {
		const char	*name;
		int		value;
	};

     If a match is found, the corresponding value is returned.  If a match
     isn't found, the not_found value is returned instead.

   * ::

       bool fs_validate_description(const char *name,
                                    const struct fs_parameter_description *desc);

     This performs some validation checks on a parameter description.  It
     returns true if the description is good and false if it is not.  It will
     log errors to the kernel log buffer if validation fails.

   * ::

        int fs_parse(struct fs_context *fc,
		     const struct fs_parameter_description *desc,
		     struct fs_parameter *param,
		     struct fs_parse_result *result);

     This is the main interpreter of parameters.  It uses the parameter
     description to look up a parameter by key name and to convert that to an
     option number (which it returns).

     If successful, and if the parameter type indicates the result is a
     boolean, integer, enum, uid, or gid type, the value is converted by this
     function and the result stored in
     result->{boolean,int_32,uint_32,uint_64,uid,gid}.

     If a match isn't initially made, the key is prefixed with "no" and no
     value is present then an attempt will be made to look up the key with the
     prefix removed.  If this matches a parameter for which the type has flag
     fs_param_neg_with_no set, then a match will be made and result->negated
     will be set to true.

     If the parameter isn't matched, -ENOPARAM will be returned; if the
     parameter is matched, but the value is erroneous, -EINVAL will be
     returned; otherwise the parameter's option number will be returned.

   * ::

       int fs_lookup_param(struct fs_context *fc,
			   struct fs_parameter *value,
			   bool want_bdev,
			   unsigned int flags,
			   struct path *_path);

     This takes a parameter that carries a string or filename type and attempts
     to do a path lookup on it.  If the parameter expects a blockdev, a check
     is made that the inode actually represents one.

     Returns 0 if successful and ``*_path`` will be set; returns a negative
     error code if not.