| # SPDX-License-Identifier: GPL-2.0 | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/usb/generic-ohci.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: USB OHCI Controller | |
| maintainers: | |
| - Greg Kroah-Hartman <gregkh@linuxfoundation.org> | |
| properties: | |
| compatible: | |
| oneOf: | |
| - items: | |
| - enum: | |
| - allwinner,sun4i-a10-ohci | |
| - allwinner,sun50i-a100-ohci | |
| - allwinner,sun50i-a64-ohci | |
| - allwinner,sun50i-h6-ohci | |
| - allwinner,sun50i-h616-ohci | |
| - allwinner,sun55i-a523-ohci | |
| - allwinner,sun5i-a13-ohci | |
| - allwinner,sun6i-a31-ohci | |
| - allwinner,sun7i-a20-ohci | |
| - allwinner,sun8i-a23-ohci | |
| - allwinner,sun8i-a83t-ohci | |
| - allwinner,sun8i-h3-ohci | |
| - allwinner,sun8i-r40-ohci | |
| - allwinner,sun8i-v3s-ohci | |
| - allwinner,sun9i-a80-ohci | |
| - allwinner,sun20i-d1-ohci | |
| - brcm,bcm3384-ohci | |
| - brcm,bcm63268-ohci | |
| - brcm,bcm6328-ohci | |
| - brcm,bcm6358-ohci | |
| - brcm,bcm6362-ohci | |
| - brcm,bcm6368-ohci | |
| - brcm,bcm7125-ohci | |
| - brcm,bcm7346-ohci | |
| - brcm,bcm7358-ohci | |
| - brcm,bcm7360-ohci | |
| - brcm,bcm7362-ohci | |
| - brcm,bcm7420-ohci | |
| - brcm,bcm7425-ohci | |
| - brcm,bcm7435-ohci | |
| - hpe,gxp-ohci | |
| - ibm,476gtr-ohci | |
| - ingenic,jz4740-ohci | |
| - rockchip,rk3588-ohci | |
| - snps,hsdk-v1.0-ohci | |
| - const: generic-ohci | |
| - enum: | |
| - generic-ohci | |
| - ti,ohci-omap3 | |
| - items: | |
| - enum: | |
| - atmel,at91rm9200-ohci | |
| - cavium,octeon-6335-ohci | |
| - nintendo,hollywood-usb-ohci | |
| - nxp,ohci-nxp | |
| - st,spear600-ohci | |
| - const: usb-ohci | |
| reg: | |
| maxItems: 1 | |
| dma-coherent: true | |
| interrupts: | |
| maxItems: 1 | |
| resets: | |
| minItems: 1 | |
| maxItems: 2 | |
| clocks: | |
| minItems: 1 | |
| maxItems: 4 | |
| description: | | |
| In case the Renesas R-Car Gen3 SoCs: | |
| - if a host only channel: first clock should be host. | |
| - if a USB DRD channel: first clock should be host and second | |
| one should be peripheral | |
| clock-names: | |
| minItems: 1 | |
| maxItems: 4 | |
| power-domains: | |
| maxItems: 1 | |
| big-endian: | |
| $ref: /schemas/types.yaml#/definitions/flag | |
| description: | |
| Set this flag for HCDs with big endian descriptors and big | |
| endian registers. | |
| big-endian-desc: | |
| $ref: /schemas/types.yaml#/definitions/flag | |
| description: | |
| Set this flag for HCDs with big endian descriptors. | |
| big-endian-regs: | |
| $ref: /schemas/types.yaml#/definitions/flag | |
| description: | |
| Set this flag for HCDs with big endian registers. | |
| remote-wakeup-connected: | |
| $ref: /schemas/types.yaml#/definitions/flag | |
| description: | |
| Remote wakeup is wired on the platform. | |
| no-big-frame-no: | |
| $ref: /schemas/types.yaml#/definitions/flag | |
| description: | |
| Set if frame_no lives in bits [15:0] of HCCA | |
| num-ports: | |
| $ref: /schemas/types.yaml#/definitions/uint32 | |
| description: | |
| Overrides the detected port count | |
| phys: | |
| minItems: 1 | |
| maxItems: 3 | |
| phy-names: | |
| const: usb | |
| iommus: | |
| maxItems: 1 | |
| dr_mode: | |
| enum: | |
| - host | |
| - otg | |
| transceiver: | |
| $ref: /schemas/types.yaml#/definitions/phandle | |
| description: | |
| The associated ISP1301 device. Necessary for the UDC controller for | |
| connecting to the USB physical layer. | |
| atmel,vbus-gpio: | |
| description: | |
| GPIO used to control or sense the USB VBUS power. Each entry | |
| represents a VBUS-related GPIO; count and order may vary by hardware. | |
| Entries follow standard GPIO specifier format. A value of 0 indicates | |
| an unused or unavailable VBUS signal. | |
| minItems: 1 | |
| maxItems: 3 | |
| atmel,oc-gpio: | |
| description: | |
| GPIO used to signal USB overcurrent condition. Each entry represents | |
| an OC detection GPIO; count and order may vary by hardware. Entries | |
| follow standard GPIO specifier format. A value of 0 indicates an | |
| unused or unavailable OC signal. | |
| minItems: 1 | |
| maxItems: 3 | |
| required: | |
| - compatible | |
| - reg | |
| - interrupts | |
| allOf: | |
| - $ref: usb-hcd.yaml | |
| - if: | |
| properties: | |
| compatible: | |
| contains: | |
| const: atmel,at91rm9200-ohci | |
| then: | |
| properties: | |
| clock-names: | |
| items: | |
| - const: ohci_clk | |
| - const: hclk | |
| - const: uhpck | |
| required: | |
| - clocks | |
| - clock-names | |
| else: | |
| properties: | |
| clock-names: false | |
| atmel,vbus-gpio: false | |
| atmel,oc-gpio: false | |
| - if: | |
| not: | |
| properties: | |
| compatible: | |
| contains: | |
| const: nxp,ohci-nxp | |
| then: | |
| properties: | |
| transceiver: false | |
| - if: | |
| properties: | |
| compatible: | |
| contains: | |
| const: rockchip,rk3588-ohci | |
| then: | |
| properties: | |
| clocks: | |
| minItems: 4 | |
| else: | |
| properties: | |
| clocks: | |
| minItems: 1 | |
| maxItems: 3 | |
| unevaluatedProperties: false | |
| examples: | |
| - | | |
| ohci0: usb@1c14400 { | |
| compatible = "allwinner,sun4i-a10-ohci", "generic-ohci"; | |
| reg = <0x01c14400 0x100>; | |
| interrupts = <64>; | |
| clocks = <&usb_clk 6>, <&ahb_gates 2>; | |
| phys = <&usbphy 1>; | |
| phy-names = "usb"; | |
| }; | |
| ... |