| # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/usb/fcs,fsa4480.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: ON Semiconductor Analog Audio Switch | |
| maintainers: | |
| - Bjorn Andersson <bjorn.andersson@linaro.org> | |
| properties: | |
| compatible: | |
| oneOf: | |
| - const: fcs,fsa4480 | |
| - items: | |
| - enum: | |
| - ocs,ocp96011 | |
| - const: fcs,fsa4480 | |
| reg: | |
| maxItems: 1 | |
| interrupts: | |
| maxItems: 1 | |
| vcc-supply: | |
| description: power supply (2.7V-5.5V) | |
| mode-switch: true | |
| orientation-switch: true | |
| port: | |
| $ref: /schemas/graph.yaml#/$defs/port-base | |
| description: | |
| A port node to link the FSA4480 to a TypeC controller for the purpose of | |
| handling altmode muxing and orientation switching. | |
| unevaluatedProperties: false | |
| properties: | |
| endpoint: | |
| $ref: /schemas/graph.yaml#/$defs/endpoint-base | |
| unevaluatedProperties: false | |
| properties: | |
| data-lanes: | |
| $ref: /schemas/types.yaml#/definitions/uint32-array | |
| description: | |
| Specifies how the AUX+/- lines are connected to SBU1/2. | |
| oneOf: | |
| - items: | |
| - const: 0 | |
| - const: 1 | |
| description: | | |
| Default AUX/SBU layout (FSA4480) | |
| - AUX+ connected to SBU2 | |
| - AUX- connected to SBU1 | |
| Default AUX/SBU layout (OCP96011) | |
| - AUX+ connected to SBU1 | |
| - AUX- connected to SBU2 | |
| - items: | |
| - const: 1 | |
| - const: 0 | |
| description: | | |
| Swapped AUX/SBU layout (FSA4480) | |
| - AUX+ connected to SBU1 | |
| - AUX- connected to SBU2 | |
| Swapped AUX/SBU layout (OCP96011) | |
| - AUX+ connected to SBU2 | |
| - AUX- connected to SBU1 | |
| required: | |
| - compatible | |
| - reg | |
| - port | |
| allOf: | |
| - $ref: usb-switch.yaml# | |
| - $ref: usb-switch-ports.yaml# | |
| additionalProperties: false | |
| examples: | |
| - | | |
| #include <dt-bindings/interrupt-controller/irq.h> | |
| i2c13 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| typec-mux@42 { | |
| compatible = "fcs,fsa4480"; | |
| reg = <0x42>; | |
| interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>; | |
| vcc-supply = <&vreg_bob>; | |
| mode-switch; | |
| orientation-switch; | |
| port { | |
| fsa4480_ept: endpoint { | |
| remote-endpoint = <&typec_controller>; | |
| }; | |
| }; | |
| }; | |
| }; | |
| ... |