| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/usb/ci-hdrc-usb2.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: USB2 ChipIdea USB controller | |
| maintainers: | |
| - Xu Yang <xu.yang_2@nxp.com> | |
| - Peng Fan <peng.fan@nxp.com> | |
| properties: | |
| compatible: | |
| oneOf: | |
| - enum: | |
| - chipidea,usb2 | |
| - lsi,zevio-usb | |
| - nuvoton,npcm750-udc | |
| - nvidia,tegra20-ehci | |
| - nvidia,tegra20-udc | |
| - nvidia,tegra30-ehci | |
| - nvidia,tegra30-udc | |
| - nvidia,tegra114-udc | |
| - nvidia,tegra124-udc | |
| - nxp,s32g2-usb | |
| - qcom,ci-hdrc | |
| - items: | |
| - enum: | |
| - nvidia,tegra114-ehci | |
| - nvidia,tegra124-ehci | |
| - nvidia,tegra210-ehci | |
| - const: nvidia,tegra30-ehci | |
| - items: | |
| - const: xlnx,zynq-usb-2.20a | |
| - const: chipidea,usb2 | |
| - items: | |
| - enum: | |
| - nuvoton,npcm845-udc | |
| - const: nuvoton,npcm750-udc | |
| - items: | |
| - enum: | |
| - nxp,s32g3-usb | |
| - const: nxp,s32g2-usb | |
| clocks: | |
| minItems: 1 | |
| maxItems: 3 | |
| clock-names: | |
| minItems: 1 | |
| maxItems: 3 | |
| operating-points-v2: | |
| description: A phandle to the OPP table containing the performance states. | |
| $ref: /schemas/types.yaml#/definitions/phandle | |
| phy-select: | |
| description: | |
| Phandler of TCSR node with two argument that indicate register | |
| offset, and phy index | |
| $ref: /schemas/types.yaml#/definitions/phandle-array | |
| items: | |
| - items: | |
| - description: phandle to TCSR node | |
| - description: register offset | |
| - description: phy index | |
| nvidia,phy: | |
| description: phandle of usb phy that connects to the port. Use "phys" instead. | |
| $ref: /schemas/types.yaml#/definitions/phandle | |
| deprecated: true | |
| nvidia,needs-double-reset: | |
| description: Indicates double reset or not. | |
| type: boolean | |
| deprecated: true | |
| ulpi: | |
| type: object | |
| additionalProperties: false | |
| patternProperties: | |
| "^phy(-[0-9])?$": | |
| description: The phy child node for Qcom chips. | |
| type: object | |
| $ref: /schemas/phy/qcom,usb-hs-phy.yaml | |
| required: | |
| - compatible | |
| allOf: | |
| - $ref: chipidea,usb2-common.yaml# | |
| - $ref: usb-hcd.yaml# | |
| - $ref: usb-drd.yaml# | |
| - if: | |
| properties: | |
| compatible: | |
| contains: | |
| const: qcom,ci-hdrc | |
| then: | |
| properties: | |
| clocks: | |
| minItems: 2 | |
| clock-names: | |
| minItems: 2 | |
| items: | |
| - const: iface | |
| - const: core | |
| - const: fs | |
| else: | |
| properties: | |
| clocks: | |
| maxItems: 2 | |
| clock-names: | |
| maxItems: 2 | |
| unevaluatedProperties: false | |
| examples: | |
| - | | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> | |
| #include <dt-bindings/clock/berlin2.h> | |
| usb@f7ed0000 { | |
| compatible = "chipidea,usb2"; | |
| reg = <0xf7ed0000 0x10000>; | |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; | |
| clocks = <&chip CLKID_USB0>; | |
| phys = <&usb_phy0>; | |
| phy-names = "usb-phy"; | |
| vbus-supply = <®_usb0_vbus>; | |
| itc-setting = <0x4>; /* 4 micro-frames */ | |
| /* Incremental burst of unspecified length */ | |
| ahb-burst-config = <0x0>; | |
| tx-burst-size-dword = <0x10>; /* 64 bytes */ | |
| rx-burst-size-dword = <0x10>; | |
| extcon = <0>, <&usb_id>; | |
| phy-clkgate-delay-us = <400>; | |
| mux-controls = <&usb_switch>; | |
| mux-control-names = "usb_switch"; | |
| }; | |
| ... |