| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/usb/brcm,usb-pinmap.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Broadcom USB pin map Controller | |
| maintainers: | |
| - Al Cooper <alcooperx@gmail.com> | |
| properties: | |
| compatible: | |
| items: | |
| - const: brcm,usb-pinmap | |
| reg: | |
| maxItems: 1 | |
| interrupts: | |
| maxItems: 1 | |
| description: Interrupt for signals mirrored to out-gpios. | |
| in-gpios: | |
| minItems: 1 | |
| maxItems: 2 | |
| description: Array of one or two GPIO pins used for input signals. | |
| brcm,in-functions: | |
| $ref: /schemas/types.yaml#/definitions/string-array | |
| description: Array of input signal names, one per gpio in in-gpios. | |
| brcm,in-masks: | |
| $ref: /schemas/types.yaml#/definitions/uint32-array | |
| description: Array of enable and mask pairs, one per gpio in-gpios. | |
| out-gpios: | |
| maxItems: 1 | |
| description: Array of one GPIO pin used for output signals. | |
| brcm,out-functions: | |
| $ref: /schemas/types.yaml#/definitions/string-array | |
| description: Array of output signal names, one per gpio in out-gpios. | |
| brcm,out-masks: | |
| $ref: /schemas/types.yaml#/definitions/uint32-array | |
| description: Array of enable, value, changed and clear masks, one | |
| per gpio in out-gpios. | |
| required: | |
| - compatible | |
| - reg | |
| additionalProperties: false | |
| dependencies: | |
| in-gpios: [ interrupts ] | |
| examples: | |
| - | | |
| usb_pinmap: usb-pinmap@22000d0 { | |
| compatible = "brcm,usb-pinmap"; | |
| reg = <0x22000d0 0x4>; | |
| in-gpios = <&gpio 18 0>, <&gpio 19 0>; | |
| brcm,in-functions = "VBUS", "PWRFLT"; | |
| brcm,in-masks = <0x8000 0x40000 0x10000 0x80000>; | |
| out-gpios = <&gpio 20 0>; | |
| brcm,out-functions = "PWRON"; | |
| brcm,out-masks = <0x20000 0x800000 0x400000 0x200000>; | |
| interrupts = <0x0 0xb2 0x4>; | |
| }; | |
| ... |