| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/tpm/tpm-common.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Trusted Platform Module common properties | |
| maintainers: | |
| - Lukas Wunner <lukas@wunner.de> | |
| properties: | |
| $nodename: | |
| pattern: '^tpm(@[0-9a-f]+)?$' | |
| interrupts: | |
| description: indicates command completion | |
| maxItems: 1 | |
| label: | |
| description: human readable string describing the device, e.g. "tpm" | |
| linux,sml-base: | |
| description: | |
| base address of reserved memory allocated for firmware event log | |
| $ref: /schemas/types.yaml#/definitions/uint64 | |
| linux,sml-size: | |
| description: | |
| size of reserved memory allocated for firmware event log | |
| $ref: /schemas/types.yaml#/definitions/uint32 | |
| memory-region: | |
| description: reserved memory allocated for firmware event log | |
| maxItems: 1 | |
| powered-while-suspended: | |
| description: | |
| present when the TPM is left powered on between suspend and resume | |
| (makes the suspend/resume callbacks do nothing) | |
| type: boolean | |
| resets: | |
| description: Reset controller to reset the TPM | |
| maxItems: 1 | |
| reset-gpios: | |
| description: Output GPIO pin to reset the TPM | |
| maxItems: 1 | |
| # must always have both linux,sml-base and linux,sml-size | |
| dependentRequired: | |
| linux,sml-base: ['linux,sml-size'] | |
| linux,sml-size: ['linux,sml-base'] | |
| # must only have either memory-region or linux,sml-base | |
| # as well as either resets or reset-gpios | |
| dependentSchemas: | |
| memory-region: | |
| properties: | |
| linux,sml-base: false | |
| linux,sml-base: | |
| properties: | |
| memory-region: false | |
| resets: | |
| properties: | |
| reset-gpios: false | |
| reset-gpios: | |
| properties: | |
| resets: false | |
| allOf: | |
| - if: | |
| properties: | |
| compatible: | |
| contains: | |
| pattern: '^st,st33zp24' | |
| then: | |
| properties: | |
| lpcpd-gpios: | |
| description: | |
| Output GPIO pin used for ST33ZP24 power management of D1/D2 state. | |
| If set, power must be present when the platform is going into | |
| sleep/hibernate mode. | |
| maxItems: 1 | |
| additionalProperties: true |