| # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/sram/qcom,imem.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Qualcomm IMEM memory region | |
| maintainers: | |
| - Bjorn Andersson <bjorn.andersson@linaro.org> | |
| description: | |
| Qualcomm IMEM is dedicated memory region for various debug features and DMA | |
| transactions. | |
| properties: | |
| compatible: | |
| items: | |
| - enum: | |
| - qcom,apq8064-imem | |
| - qcom,ipq5424-imem | |
| - qcom,msm8226-imem | |
| - qcom,msm8974-imem | |
| - qcom,msm8976-imem | |
| - qcom,qcs404-imem | |
| - qcom,qcs615-imem | |
| - qcom,qcs8300-imem | |
| - qcom,qdu1000-imem | |
| - qcom,sa8775p-imem | |
| - qcom,sar2130p-imem | |
| - qcom,sc7180-imem | |
| - qcom,sc7280-imem | |
| - qcom,sc8280xp-imem | |
| - qcom,sdm630-imem | |
| - qcom,sdm845-imem | |
| - qcom,sdx55-imem | |
| - qcom,sdx65-imem | |
| - qcom,sdx75-imem | |
| - qcom,sm6115-imem | |
| - qcom,sm6125-imem | |
| - qcom,sm6350-imem | |
| - qcom,sm6375-imem | |
| - qcom,sm7150-imem | |
| - qcom,sm8150-imem | |
| - qcom,sm8250-imem | |
| - qcom,sm8350-imem | |
| - qcom,sm8450-imem | |
| - qcom,sm8550-imem | |
| - qcom,sm8650-imem | |
| - qcom,sm8750-imem | |
| - qcom,x1e80100-imem | |
| - const: syscon | |
| - const: simple-mfd | |
| reg: | |
| maxItems: 1 | |
| ranges: true | |
| '#address-cells': | |
| const: 1 | |
| '#size-cells': | |
| const: 1 | |
| reboot-mode: | |
| $ref: /schemas/power/reset/syscon-reboot-mode.yaml# | |
| patternProperties: | |
| "^minidump-sram@[0-9a-f]+$": | |
| type: object | |
| description: | |
| A word in always-on SRAM shared between the kernel and boot firmware. | |
| Before DDR is initialised on the warm reset following a crash, firmware | |
| reads this word to decide where to deliver the minidump (USB or storage). | |
| properties: | |
| reg: | |
| maxItems: 1 | |
| required: | |
| - reg | |
| additionalProperties: false | |
| "^modem-tables@[0-9a-f]+$": | |
| type: object | |
| description: | |
| Region containing packet processing configuration for the IP Accelerator. | |
| properties: | |
| reg: | |
| maxItems: 1 | |
| required: | |
| - reg | |
| additionalProperties: false | |
| "^pil-reloc@[0-9a-f]+$": | |
| $ref: /schemas/remoteproc/qcom,pil-info.yaml# | |
| description: Peripheral image loader relocation region | |
| required: | |
| - compatible | |
| - reg | |
| allOf: | |
| - if: | |
| properties: | |
| compatible: | |
| contains: | |
| enum: | |
| - qcom,apq8064-imem | |
| - qcom,msm8226-imem | |
| - qcom,msm8974-imem | |
| then: | |
| properties: | |
| reboot-mode: | |
| patternProperties: | |
| # Negative look-ahead to disallow unsupported modes. The '$' has to be | |
| # part of lookahead group to work, instead of trailing outside of (). | |
| "^mode-(?!(bootloader$|normal$|recovery$))": false | |
| else: | |
| properties: | |
| reboot-mode: false | |
| additionalProperties: false | |
| examples: | |
| - | | |
| soc { | |
| #address-cells = <2>; | |
| #size-cells = <2>; | |
| sram@146bf000 { | |
| compatible = "qcom,sdm845-imem", "syscon", "simple-mfd"; | |
| reg = <0 0x146bf000 0 0x1000>; | |
| ranges = <0 0 0x146bf000 0x1000>; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| pil-reloc@94c { | |
| compatible = "qcom,pil-reloc-info"; | |
| reg = <0x94c 0xc8>; | |
| }; | |
| }; | |
| }; |