| # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/regulator/microchip,mcp16502.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: MCP16502 - High-Performance PMIC | |
| maintainers: | |
| - Andrei Simion <andrei.simion@microchip.com> | |
| description: | |
| The MCP16502 is an optimally integrated PMIC compatible | |
| with Microchip's eMPUs(Embedded Microprocessor Units), | |
| requiring Dynamic Voltage Scaling (DVS) with the use | |
| of High-Performance mode (HPM). | |
| properties: | |
| compatible: | |
| const: microchip,mcp16502 | |
| lpm-gpios: | |
| maxItems: 1 | |
| description: GPIO for LPM pin. | |
| Note that this GPIO must remain high during | |
| suspend-to-ram, keeping the PMIC into HIBERNATE mode. | |
| reg: | |
| maxItems: 1 | |
| lvin-supply: | |
| description: Input supply phandle for LDO1 and LDO2 | |
| pvin1-supply: | |
| description: Input supply phandle for VDD_IO (BUCK1) | |
| pvin2-supply: | |
| description: Input supply phandle for VDD_DDR (BUCK2) | |
| pvin3-supply: | |
| description: Input supply phandle for VDD_CORE (BUCK3) | |
| pvin4-supply: | |
| description: Input supply phandle for VDD_OTHER (BUCK4) | |
| regulators: | |
| type: object | |
| additionalProperties: false | |
| description: List of regulators and its properties. | |
| patternProperties: | |
| "^(VDD_(IO|CORE|DDR|OTHER)|LDO[1-2])$": | |
| type: object | |
| $ref: regulator.yaml# | |
| unevaluatedProperties: false | |
| properties: | |
| regulator-initial-mode: | |
| enum: [2, 4] | |
| default: 2 | |
| description: Initial operating mode | |
| regulator-allowed-modes: | |
| items: | |
| enum: [2, 4] | |
| description: Supported modes | |
| 2 - FPWM higher precision, higher consumption | |
| 4 - AutoPFM lower precision, lower consumption | |
| required: | |
| - compatible | |
| - reg | |
| - regulators | |
| additionalProperties: false | |
| examples: | |
| - | | |
| i2c { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| pmic@5b { | |
| compatible = "microchip,mcp16502"; | |
| reg = <0x5b>; | |
| lvin-supply = <®_5v>; | |
| pvin1-supply = <®_5v>; | |
| pvin2-supply = <®_5v>; | |
| pvin3-supply = <®_5v>; | |
| pvin4-supply = <®_5v>; | |
| regulators { | |
| VDD_IO { | |
| regulator-name = "VDD_IO"; | |
| regulator-min-microvolt = <3300000>; | |
| regulator-max-microvolt = <3300000>; | |
| regulator-initial-mode = <2>; | |
| regulator-allowed-modes = <2>, <4>; | |
| regulator-always-on; | |
| regulator-state-standby { | |
| regulator-on-in-suspend; | |
| regulator-mode = <4>; | |
| }; | |
| regulator-state-mem { | |
| regulator-off-in-suspend; | |
| regulator-mode = <4>; | |
| }; | |
| }; | |
| VDD_DDR { | |
| regulator-name = "VDD_DDR"; | |
| regulator-min-microvolt = <1350000>; | |
| regulator-max-microvolt = <1350000>; | |
| regulator-initial-mode = <2>; | |
| regulator-allowed-modes = <2>, <4>; | |
| regulator-always-on; | |
| regulator-state-standby { | |
| regulator-on-in-suspend; | |
| regulator-mode = <4>; | |
| }; | |
| regulator-state-mem { | |
| regulator-on-in-suspend; | |
| regulator-mode = <4>; | |
| }; | |
| }; | |
| VDD_CORE { | |
| regulator-name = "VDD_CORE"; | |
| regulator-min-microvolt = <1150000>; | |
| regulator-max-microvolt = <1150000>; | |
| regulator-initial-mode = <2>; | |
| regulator-allowed-modes = <2>, <4>; | |
| regulator-always-on; | |
| regulator-state-standby { | |
| regulator-on-in-suspend; | |
| regulator-mode = <4>; | |
| }; | |
| regulator-state-mem { | |
| regulator-off-in-suspend; | |
| regulator-mode = <4>; | |
| }; | |
| }; | |
| VDD_OTHER { | |
| regulator-name = "VDD_OTHER"; | |
| regulator-min-microvolt = <1050000>; | |
| regulator-max-microvolt = <1250000>; | |
| regulator-initial-mode = <2>; | |
| regulator-allowed-modes = <2>, <4>; | |
| regulator-always-on; | |
| regulator-state-standby { | |
| regulator-on-in-suspend; | |
| regulator-mode = <4>; | |
| }; | |
| regulator-state-mem { | |
| regulator-off-in-suspend; | |
| regulator-mode = <4>; | |
| }; | |
| }; | |
| LDO1 { | |
| regulator-name = "LDO1"; | |
| regulator-min-microvolt = <1800000>; | |
| regulator-max-microvolt = <1800000>; | |
| regulator-always-on; | |
| regulator-state-standby { | |
| regulator-on-in-suspend; | |
| }; | |
| regulator-state-mem { | |
| regulator-off-in-suspend; | |
| }; | |
| }; | |
| LDO2 { | |
| regulator-name = "LDO2"; | |
| regulator-min-microvolt = <1200000>; | |
| regulator-max-microvolt = <3700000>; | |
| regulator-always-on; | |
| regulator-state-standby { | |
| regulator-on-in-suspend; | |
| }; | |
| regulator-state-mem { | |
| regulator-off-in-suspend; | |
| }; | |
| }; | |
| }; | |
| }; | |
| }; |