| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/phy/phy-rockchip-usbdp.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Rockchip USBDP Combo PHY with Samsung IP block | |
| maintainers: | |
| - Frank Wang <frank.wang@rock-chips.com> | |
| - Zhang Yubing <yubing.zhang@rock-chips.com> | |
| properties: | |
| compatible: | |
| enum: | |
| - rockchip,rk3576-usbdp-phy | |
| - rockchip,rk3588-usbdp-phy | |
| reg: | |
| maxItems: 1 | |
| "#phy-cells": | |
| description: | | |
| Cell allows setting the type of the PHY. Possible values are: | |
| - PHY_TYPE_USB3 | |
| - PHY_TYPE_DP | |
| const: 1 | |
| clocks: | |
| maxItems: 4 | |
| clock-names: | |
| items: | |
| - const: refclk | |
| - const: immortal | |
| - const: pclk | |
| - const: utmi | |
| resets: | |
| maxItems: 5 | |
| reset-names: | |
| items: | |
| - const: init | |
| - const: cmn | |
| - const: lane | |
| - const: pcs_apb | |
| - const: pma_apb | |
| phy-supply: | |
| description: Single PHY regulator | |
| rockchip,dp-lane-mux: | |
| $ref: /schemas/types.yaml#/definitions/uint32-array | |
| minItems: 2 | |
| maxItems: 4 | |
| items: | |
| maximum: 3 | |
| description: | |
| An array of physical Type-C lanes indexes. Position of an entry | |
| determines the DisplayPort (DP) lane index, while the value of an entry | |
| indicates physical Type-C lane. The supported DP lanes number are 2 or 4. | |
| e.g. for 2 lanes DP lanes map, we could have "rockchip,dp-lane-mux = <2, | |
| 3>;", assuming DP lane0 on Type-C phy lane2, DP lane1 on Type-C phy | |
| lane3. For 4 lanes DP lanes map, we could have "rockchip,dp-lane-mux = | |
| <0, 1, 2, 3>;", assuming DP lane0 on Type-C phy lane0, DP lane1 on Type-C | |
| phy lane1, DP lane2 on Type-C phy lane2, DP lane3 on Type-C phy lane3. If | |
| DP lanes are mapped by DisplayPort Alt mode, this property is not needed. | |
| rockchip,u2phy-grf: | |
| $ref: /schemas/types.yaml#/definitions/phandle | |
| description: | |
| Phandle to the syscon managing the 'usb2 phy general register files'. | |
| rockchip,usb-grf: | |
| $ref: /schemas/types.yaml#/definitions/phandle | |
| description: | |
| Phandle to the syscon managing the 'usb general register files'. | |
| rockchip,usbdpphy-grf: | |
| $ref: /schemas/types.yaml#/definitions/phandle | |
| description: | |
| Phandle to the syscon managing the 'usbdp phy general register files'. | |
| rockchip,vo-grf: | |
| $ref: /schemas/types.yaml#/definitions/phandle | |
| description: | |
| Phandle to the syscon managing the 'video output general register files'. | |
| When select the DP lane mapping will request its phandle. | |
| sbu1-dc-gpios: | |
| description: | |
| GPIO connected to the SBU1 line of the USB-C connector via a big resistor | |
| (~100K) to apply a DC offset for signalling the connector orientation. | |
| maxItems: 1 | |
| sbu2-dc-gpios: | |
| description: | |
| GPIO connected to the SBU2 line of the USB-C connector via a big resistor | |
| (~100K) to apply a DC offset for signalling the connector orientation. | |
| maxItems: 1 | |
| orientation-switch: | |
| description: Flag the port as possible handler of orientation switching | |
| type: boolean | |
| mode-switch: | |
| description: Flag the port as possible handler of altmode switching | |
| type: boolean | |
| port: | |
| $ref: /schemas/graph.yaml#/properties/port | |
| description: | |
| A port node to link the PHY to a TypeC controller for the purpose of | |
| handling orientation switching. | |
| required: | |
| - compatible | |
| - reg | |
| - clocks | |
| - clock-names | |
| - resets | |
| - reset-names | |
| - "#phy-cells" | |
| additionalProperties: false | |
| examples: | |
| - | | |
| #include <dt-bindings/clock/rockchip,rk3588-cru.h> | |
| #include <dt-bindings/reset/rockchip,rk3588-cru.h> | |
| usbdp_phy0: phy@fed80000 { | |
| compatible = "rockchip,rk3588-usbdp-phy"; | |
| reg = <0xfed80000 0x10000>; | |
| #phy-cells = <1>; | |
| clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>, | |
| <&cru CLK_USBDP_PHY0_IMMORTAL>, | |
| <&cru PCLK_USBDPPHY0>, | |
| <&u2phy0>; | |
| clock-names = "refclk", "immortal", "pclk", "utmi"; | |
| resets = <&cru SRST_USBDP_COMBO_PHY0_INIT>, | |
| <&cru SRST_USBDP_COMBO_PHY0_CMN>, | |
| <&cru SRST_USBDP_COMBO_PHY0_LANE>, | |
| <&cru SRST_USBDP_COMBO_PHY0_PCS>, | |
| <&cru SRST_P_USBDPPHY0>; | |
| reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb"; | |
| rockchip,u2phy-grf = <&usb2phy0_grf>; | |
| rockchip,usb-grf = <&usb_grf>; | |
| rockchip,usbdpphy-grf = <&usbdpphy0_grf>; | |
| rockchip,vo-grf = <&vo0_grf>; | |
| }; |