| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/phy/marvell,comphy-cp110.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Marvell MVEBU COMPHY Controller | |
| maintainers: | |
| - Miquel Raynal <miquel.raynal@bootlin.com> | |
| description: > | |
| COMPHY controllers can be found on the following Marvell MVEBU SoCs: | |
| * Armada 7k/8k (on the CP110) | |
| * Armada 3700 | |
| It provides a number of shared PHYs used by various interfaces (network, SATA, | |
| USB, PCIe...). | |
| properties: | |
| compatible: | |
| enum: | |
| - marvell,comphy-cp110 | |
| - marvell,comphy-a3700 | |
| reg: | |
| minItems: 1 | |
| items: | |
| - description: Generic COMPHY registers | |
| - description: Lane 1 (PCIe/GbE) registers (Armada 3700) | |
| - description: Lane 0 (USB3/GbE) registers (Armada 3700) | |
| - description: Lane 2 (SATA/USB3) registers (Armada 3700) | |
| reg-names: | |
| minItems: 1 | |
| items: | |
| - const: comphy | |
| - const: lane1_pcie_gbe | |
| - const: lane0_usb3_gbe | |
| - const: lane2_sata_usb3 | |
| '#address-cells': | |
| const: 1 | |
| '#size-cells': | |
| const: 0 | |
| clocks: | |
| minItems: 1 | |
| maxItems: 3 | |
| clock-names: | |
| minItems: 1 | |
| maxItems: 3 | |
| marvell,system-controller: | |
| description: Phandle to the Marvell system controller (CP110 only) | |
| $ref: /schemas/types.yaml#/definitions/phandle | |
| patternProperties: | |
| '^phy@[0-5]$': | |
| description: A COMPHY lane child node | |
| type: object | |
| additionalProperties: false | |
| properties: | |
| reg: | |
| description: COMPHY lane number | |
| maximum: 5 | |
| '#phy-cells': | |
| const: 1 | |
| connector: | |
| type: object | |
| required: | |
| - reg | |
| - '#phy-cells' | |
| required: | |
| - compatible | |
| - reg | |
| additionalProperties: false | |
| allOf: | |
| - if: | |
| properties: | |
| compatible: | |
| const: marvell,comphy-a3700 | |
| then: | |
| properties: | |
| clocks: | |
| maxItems: 1 | |
| clock-names: | |
| const: xtal | |
| required: | |
| - reg-names | |
| else: | |
| properties: | |
| clocks: | |
| minItems: 3 | |
| clock-names: | |
| items: | |
| - const: mg_clk | |
| - const: mg_core_clk | |
| - const: axi_clk | |
| required: | |
| - marvell,system-controller | |
| examples: | |
| - | | |
| phy@120000 { | |
| compatible = "marvell,comphy-cp110"; | |
| reg = <0x120000 0x6000>; | |
| clocks = <&clk 1 5>, <&clk 1 6>, <&clk 1 18>; | |
| clock-names = "mg_clk", "mg_core_clk", "axi_clk"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| marvell,system-controller = <&syscon0>; | |
| phy@0 { | |
| reg = <0>; | |
| #phy-cells = <1>; | |
| }; | |
| phy@1 { | |
| reg = <1>; | |
| #phy-cells = <1>; | |
| }; | |
| }; | |
| - | | |
| phy@18300 { | |
| compatible = "marvell,comphy-a3700"; | |
| reg = <0x18300 0x300>, | |
| <0x1F000 0x400>, | |
| <0x5C000 0x400>, | |
| <0xe0178 0x8>; | |
| reg-names = "comphy", | |
| "lane1_pcie_gbe", | |
| "lane0_usb3_gbe", | |
| "lane2_sata_usb3"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| comphy0: phy@0 { | |
| reg = <0>; | |
| #phy-cells = <1>; | |
| }; | |
| comphy1: phy@1 { | |
| reg = <1>; | |
| #phy-cells = <1>; | |
| }; | |
| comphy2: phy@2 { | |
| reg = <2>; | |
| #phy-cells = <1>; | |
| }; | |
| }; |