| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| # Copyright (C) 2021 Microchip Technology, Inc. | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/media/microchip,xisc.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Microchip eXtended Image Sensor Controller (XISC) | |
| maintainers: | |
| - Eugen Hristev <eugen.hristev@microchip.com> | |
| description: | | |
| The eXtended Image Sensor Controller (XISC) device provides the video input capabilities for the | |
| Microchip AT91 SAM family of devices. | |
| The XISC has a single internal parallel input that supports RAW Bayer, RGB or YUV video. | |
| The source can be either a demuxer from a CSI2 type of bus, or a simple direct bridge to a | |
| parallel sensor. | |
| The XISC provides one clock output that is used to clock the demuxer/bridge. | |
| properties: | |
| compatible: | |
| const: microchip,sama7g5-isc | |
| reg: | |
| maxItems: 1 | |
| interrupts: | |
| maxItems: 1 | |
| clocks: | |
| maxItems: 1 | |
| clock-names: | |
| items: | |
| - const: hclock | |
| '#clock-cells': | |
| const: 0 | |
| clock-output-names: | |
| const: isc-mck | |
| microchip,mipi-mode: | |
| type: boolean | |
| description: | |
| As the XISC is usually connected to a demux/bridge, the XISC receives | |
| the same type of input, however, it should be aware of the type of | |
| signals received. The mipi-mode enables different internal handling | |
| of the data and clock lines. | |
| port: | |
| $ref: /schemas/graph.yaml#/$defs/port-base | |
| description: | |
| Input port node, single endpoint describing the input pad. | |
| properties: | |
| endpoint: | |
| $ref: video-interfaces.yaml# | |
| properties: | |
| bus-type: | |
| enum: [5, 6] | |
| remote-endpoint: true | |
| bus-width: | |
| enum: [8, 9, 10, 11, 12, 14] | |
| default: 12 | |
| hsync-active: | |
| enum: [0, 1] | |
| default: 1 | |
| vsync-active: | |
| enum: [0, 1] | |
| default: 1 | |
| pclk-sample: | |
| enum: [0, 1] | |
| default: 1 | |
| required: | |
| - remote-endpoint | |
| - bus-type | |
| additionalProperties: false | |
| additionalProperties: false | |
| required: | |
| - compatible | |
| - reg | |
| - clocks | |
| - clock-names | |
| - '#clock-cells' | |
| - clock-output-names | |
| - port | |
| additionalProperties: false | |
| examples: | |
| - | | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> | |
| #include <dt-bindings/clock/at91.h> | |
| #include <dt-bindings/interrupt-controller/irq.h> | |
| #include <dt-bindings/media/video-interfaces.h> | |
| xisc: xisc@e1408000 { | |
| compatible = "microchip,sama7g5-isc"; | |
| reg = <0xe1408000 0x2000>; | |
| interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; | |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 56>; | |
| clock-names = "hclock"; | |
| #clock-cells = <0>; | |
| clock-output-names = "isc-mck"; | |
| port { | |
| xisc_in: endpoint { | |
| bus-type = <MEDIA_BUS_TYPE_PARALLEL>; | |
| remote-endpoint = <&csi2dc_out>; | |
| hsync-active = <1>; | |
| vsync-active = <1>; | |
| bus-width = <12>; | |
| }; | |
| }; | |
| }; |