| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/ti,keystone-irq.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Keystone 2 IRQ controller IP | |
| maintainers: | |
| - Grygorii Strashko <grygorii.strashko@ti.com> | |
| description: | |
| On Keystone SOCs, DSP cores can send interrupts to ARM host using the IRQ | |
| controller IP. It provides 28 IRQ signals to ARM. The IRQ handler running on | |
| HOST OS can identify DSP signal source by analyzing SRCCx bits in IPCARx | |
| registers. This is one of the component used by the IPC mechanism used on | |
| Keystone SOCs. | |
| properties: | |
| compatible: | |
| const: ti,keystone-irq | |
| reg: | |
| maxItems: 1 | |
| interrupt-controller: true | |
| '#interrupt-cells': | |
| const: 1 | |
| interrupts: | |
| maxItems: 1 | |
| ti,syscon-dev: | |
| description: Phandle and offset to syscon device | |
| $ref: /schemas/types.yaml#/definitions/phandle-array | |
| items: | |
| - items: | |
| - description: Phandle to syscon device control registers | |
| - description: Offset to control register | |
| required: | |
| - compatible | |
| - reg | |
| - interrupt-controller | |
| - '#interrupt-cells' | |
| - interrupts | |
| - ti,syscon-dev | |
| additionalProperties: false | |
| examples: | |
| - | | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> | |
| interrupt-controller@2a0 { | |
| compatible = "ti,keystone-irq"; | |
| reg = <0x2a0 0x4>; | |
| ti,syscon-dev = <&devctrl 0x2a0>; | |
| interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>; | |
| interrupt-controller; | |
| #interrupt-cells = <1>; | |
| }; |