| # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/interrupt-controller/atmel,aic.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Advanced Interrupt Controller (AIC) | |
| maintainers: | |
| - Nicolas Ferre <nicolas.ferre@microchip.com> | |
| - Dharma balasubiramani <dharma.b@microchip.com> | |
| description: | |
| The Advanced Interrupt Controller (AIC) is an 8-level priority, individually | |
| maskable, vectored interrupt controller providing handling of up to one | |
| hundred and twenty-eight interrupt sources. | |
| properties: | |
| compatible: | |
| enum: | |
| - atmel,at91rm9200-aic | |
| - atmel,sama5d2-aic | |
| - atmel,sama5d3-aic | |
| - atmel,sama5d4-aic | |
| - microchip,sam9x60-aic | |
| - microchip,sam9x7-aic | |
| reg: | |
| maxItems: 1 | |
| interrupt-controller: true | |
| "#interrupt-cells": | |
| const: 3 | |
| description: | | |
| The 1st cell is the IRQ number (Peripheral IDentifier on datasheet). | |
| The 2nd cell specifies flags: | |
| bits[3:0] trigger type and level flags: | |
| 1 = low-to-high edge triggered. | |
| 2 = high-to-low edge triggered. | |
| 4 = active high level-sensitive. | |
| 8 = active low level-sensitive. | |
| Valid combinations: 1, 2, 3, 4, 8. | |
| Default for internal sources: 4 (active high). | |
| The 3rd cell specifies irq priority from 0 (lowest) to 7 (highest). | |
| interrupts: | |
| maxItems: 1 | |
| atmel,external-irqs: | |
| $ref: /schemas/types.yaml#/definitions/uint32-array | |
| description: u32 array of external irqs. | |
| allOf: | |
| - $ref: /schemas/interrupt-controller.yaml# | |
| - if: | |
| properties: | |
| compatible: | |
| contains: | |
| const: atmel,at91rm9200-aic | |
| then: | |
| properties: | |
| atmel,external-irqs: | |
| minItems: 1 | |
| maxItems: 7 | |
| else: | |
| properties: | |
| atmel,external-irqs: | |
| minItems: 1 | |
| maxItems: 1 | |
| required: | |
| - compatible | |
| - reg | |
| - interrupt-controller | |
| - "#interrupt-cells" | |
| - atmel,external-irqs | |
| unevaluatedProperties: false | |
| examples: | |
| - | | |
| interrupt-controller@fffff000 { | |
| compatible = "atmel,at91rm9200-aic"; | |
| reg = <0xfffff000 0x200>; | |
| interrupt-controller; | |
| #interrupt-cells = <3>; | |
| atmel,external-irqs = <31>; | |
| }; | |
| ... |