| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/interrupt-controller/arm,gic-v5-iwb.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: ARM Generic Interrupt Controller, version 5 Interrupt Wire Bridge (IWB) | |
| maintainers: | |
| - Lorenzo Pieralisi <lpieralisi@kernel.org> | |
| - Marc Zyngier <maz@kernel.org> | |
| description: | | |
| The GICv5 architecture defines the guidelines to implement GICv5 | |
| compliant interrupt controllers for AArch64 systems. | |
| The GICv5 specification can be found at | |
| https://developer.arm.com/documentation/aes0070 | |
| GICv5 has zero or more Interrupt Wire Bridges (IWB) that are responsible | |
| for translating wire signals into interrupt messages to the GICv5 ITS. | |
| allOf: | |
| - $ref: /schemas/interrupt-controller.yaml# | |
| properties: | |
| compatible: | |
| const: arm,gic-v5-iwb | |
| reg: | |
| items: | |
| - description: IWB control frame | |
| "#address-cells": | |
| const: 0 | |
| "#interrupt-cells": | |
| description: | | |
| The 1st cell corresponds to the IWB wire. | |
| The 2nd cell is the flags, encoded as follows: | |
| bits[3:0] trigger type and level flags. | |
| 1 = low-to-high edge triggered | |
| 2 = high-to-low edge triggered | |
| 4 = active high level-sensitive | |
| 8 = active low level-sensitive | |
| const: 2 | |
| interrupt-controller: true | |
| msi-parent: | |
| maxItems: 1 | |
| required: | |
| - compatible | |
| - reg | |
| - "#interrupt-cells" | |
| - interrupt-controller | |
| - msi-parent | |
| additionalProperties: false | |
| examples: | |
| - | | |
| interrupt-controller@2f000000 { | |
| compatible = "arm,gic-v5-iwb"; | |
| reg = <0x2f000000 0x10000>; | |
| #address-cells = <0>; | |
| #interrupt-cells = <2>; | |
| interrupt-controller; | |
| msi-parent = <&its0 64>; | |
| }; | |
| ... |