| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/input/touchscreen/ti,ads7843.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: TI's SPI driven touch screen controllers | |
| maintainers: | |
| - Alexander Stein <alexander.stein@ew.tq-group.com> | |
| - Dmitry Torokhov <dmitry.torokhov@gmail.com> | |
| - Marek Vasut <marex@denx.de> | |
| description: | |
| TI's ADS7843, ADS7845, ADS7846, ADS7873, TSC2046 SPI driven touch screen | |
| controllers. | |
| properties: | |
| compatible: | |
| enum: | |
| - ti,ads7843 | |
| - ti,ads7845 | |
| - ti,ads7846 | |
| - ti,ads7873 | |
| - ti,tsc2046 | |
| interrupts: | |
| maxItems: 1 | |
| pendown-gpio: | |
| maxItems: 1 | |
| description: | |
| GPIO handle describing the pin the !PENIRQ line is connected to. | |
| vcc-supply: | |
| description: | |
| A regulator node for the supply voltage. | |
| wakeup-source: true | |
| ti,debounce-max: | |
| deprecated: true | |
| $ref: /schemas/types.yaml#/definitions/uint16 | |
| description: | |
| Max number of additional readings per sample. | |
| ti,debounce-rep: | |
| $ref: /schemas/types.yaml#/definitions/uint16 | |
| description: | |
| Additional consecutive good readings required after the first two. | |
| ti,debounce-tol: | |
| $ref: /schemas/types.yaml#/definitions/uint16 | |
| description: | |
| Tolerance used for filtering. | |
| ti,hsync-gpios: | |
| maxItems: 1 | |
| description: | |
| GPIO line to poll for hsync. | |
| ti,keep-vref-on: | |
| $ref: /schemas/types.yaml#/definitions/flag | |
| description: | |
| Set to keep Vref on for differential measurements as well. | |
| ti,pendown-gpio-debounce: | |
| $ref: /schemas/types.yaml#/definitions/uint32 | |
| description: | |
| Platform specific debounce time for the pendown-gpio. | |
| ti,penirq-recheck-delay-usecs: | |
| $ref: /schemas/types.yaml#/definitions/uint16 | |
| description: | |
| If set to non-zero, after samples are taken this delay is applied and | |
| penirq is rechecked, to help avoid false events. This value is | |
| affected by the material used to build the touch layer. | |
| ti,pressure-max: | |
| deprecated: true | |
| $ref: /schemas/types.yaml#/definitions/uint16 | |
| description: | |
| Maximum reported pressure value. | |
| ti,pressure-min: | |
| deprecated: true | |
| $ref: /schemas/types.yaml#/definitions/uint16 | |
| description: | |
| Minimum reported pressure value (threshold). | |
| ti,settle-delay-usec: | |
| $ref: /schemas/types.yaml#/definitions/uint16 | |
| description: | |
| Settling time of the analog signals; a function of Vcc and the | |
| capacitance on the X/Y drivers. If set to non-zero, two samples are | |
| taken with settle_delay us apart, and the second one is used. ~150 | |
| uSec with 0.01uF caps. | |
| ti,swap-xy: | |
| deprecated: true | |
| $ref: /schemas/types.yaml#/definitions/flag | |
| description: | |
| Swap x and y axis. | |
| ti,vref-delay-usecs: | |
| $ref: /schemas/types.yaml#/definitions/uint16 | |
| description: | |
| Vref supply delay in usecs, 0 for external Vref. | |
| ti,vref-mv: | |
| $ref: /schemas/types.yaml#/definitions/uint16 | |
| description: | |
| The VREF voltage, in millivolts. | |
| Set to 0 to use internal references (ADS7846). | |
| ti,x-plate-ohms: | |
| $ref: /schemas/types.yaml#/definitions/uint16 | |
| description: | |
| Resistance of the X-plate, in Ohms. | |
| ti,x-max: | |
| deprecated: true | |
| $ref: /schemas/types.yaml#/definitions/uint16 | |
| description: | |
| Maximum value on the X axis. | |
| ti,x-min: | |
| deprecated: true | |
| $ref: /schemas/types.yaml#/definitions/uint16 | |
| description: | |
| Minimum value on the X axis. | |
| ti,y-plate-ohms: | |
| $ref: /schemas/types.yaml#/definitions/uint16 | |
| description: | |
| Resistance of the Y-plate, in Ohms. | |
| ti,y-max: | |
| deprecated: true | |
| $ref: /schemas/types.yaml#/definitions/uint16 | |
| description: | |
| Maximum value on the Y axis. | |
| ti,y-min: | |
| deprecated: true | |
| $ref: /schemas/types.yaml#/definitions/uint16 | |
| description: | |
| Minimum value on the Y axis. | |
| required: | |
| - compatible | |
| - reg | |
| allOf: | |
| - $ref: touchscreen.yaml# | |
| - $ref: /schemas/spi/spi-peripheral-props.yaml# | |
| unevaluatedProperties: false | |
| examples: | |
| - | | |
| spi{ | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| touchscreen@0 { | |
| compatible = "ti,tsc2046"; | |
| reg = <0>; /* CS0 */ | |
| interrupt-parent = <&gpio1>; | |
| interrupts = <8 0>; /* BOOT6 / GPIO 8 */ | |
| pendown-gpio = <&gpio1 8 0>; | |
| spi-max-frequency = <1000000>; | |
| vcc-supply = <®_vcc3>; | |
| wakeup-source; | |
| ti,pressure-max = /bits/ 16 <255>; | |
| ti,x-max = /bits/ 16 <8000>; | |
| ti,x-min = /bits/ 16 <0>; | |
| ti,x-plate-ohms = /bits/ 16 <40>; | |
| ti,y-max = /bits/ 16 <4800>; | |
| ti,y-min = /bits/ 16 <0>; | |
| }; | |
| }; |