| # SPDX-License-Identifier: GPL-2.0 | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/input/touchscreen/chipone,icn8318.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: ChipOne ICN8318 Touchscreen Controller | |
| maintainers: | |
| - Dmitry Torokhov <dmitry.torokhov@gmail.com> | |
| allOf: | |
| - $ref: touchscreen.yaml# | |
| properties: | |
| compatible: | |
| const: chipone,icn8318 | |
| reg: | |
| maxItems: 1 | |
| interrupts: | |
| maxItems: 1 | |
| wake-gpios: | |
| maxItems: 1 | |
| unevaluatedProperties: false | |
| required: | |
| - compatible | |
| - reg | |
| - interrupts | |
| - wake-gpios | |
| - touchscreen-size-x | |
| - touchscreen-size-y | |
| examples: | |
| - | | |
| #include <dt-bindings/gpio/gpio.h> | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> | |
| i2c { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| touchscreen@40 { | |
| compatible = "chipone,icn8318"; | |
| reg = <0x40>; | |
| interrupt-parent = <&pio>; | |
| interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */ | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&ts_wake_pin_p66>; | |
| wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ | |
| touchscreen-size-x = <800>; | |
| touchscreen-size-y = <480>; | |
| touchscreen-inverted-x; | |
| touchscreen-swapped-x-y; | |
| }; | |
| }; | |
| ... |