| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/input/ilitek,ili2901.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Ilitek ILI2901 touchscreen controller | |
| maintainers: | |
| - Jiri Kosina <jkosina@suse.com> | |
| description: | |
| Supports the Ilitek ILI2901 touchscreen controller. | |
| This touchscreen controller uses the i2c-hid protocol with a reset GPIO. | |
| allOf: | |
| - $ref: /schemas/input/touchscreen/touchscreen.yaml# | |
| properties: | |
| compatible: | |
| enum: | |
| - ilitek,ili2901 | |
| reg: | |
| maxItems: 1 | |
| interrupts: | |
| maxItems: 1 | |
| panel: true | |
| reset-gpios: | |
| maxItems: 1 | |
| vcc33-supply: true | |
| vccio-supply: true | |
| required: | |
| - compatible | |
| - reg | |
| - interrupts | |
| - vcc33-supply | |
| additionalProperties: false | |
| examples: | |
| - | | |
| #include <dt-bindings/gpio/gpio.h> | |
| #include <dt-bindings/interrupt-controller/irq.h> | |
| i2c { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| touchscreen@41 { | |
| compatible = "ilitek,ili2901"; | |
| reg = <0x41>; | |
| interrupt-parent = <&tlmm>; | |
| interrupts = <9 IRQ_TYPE_LEVEL_LOW>; | |
| reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; | |
| vcc33-supply = <&pp3300_ts>; | |
| }; | |
| }; |