| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/extcon/fcs,fsa880.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Fairchild Semiconductor FSA880, FSA9480 and compatibles | |
| maintainers: | |
| - Linus Walleij <linusw@kernel.org> | |
| description: | |
| The FSA880 and FSA9480 are USB port accessory detectors and switches. | |
| The switch is fully controlled using I2C and enables USB data, stereo | |
| and mono audio, video, microphone, and UART data to use a common | |
| connector port. Compatible switches exist from other manufacturers. | |
| properties: | |
| compatible: | |
| enum: | |
| - fcs,fsa880 | |
| - fcs,fsa9480 | |
| - ti,tsu6111 | |
| reg: | |
| maxItems: 1 | |
| description: The I2C address for an FSA880 compatible device is | |
| usually 0x25. | |
| interrupts: | |
| maxItems: 1 | |
| required: | |
| - compatible | |
| - reg | |
| - interrupts | |
| additionalProperties: false | |
| examples: | |
| - | | |
| #include <dt-bindings/interrupt-controller/irq.h> | |
| i2c { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| usb-switch@25 { | |
| compatible = "fcs,fsa880"; | |
| reg = <0x25>; | |
| interrupt-parent = <&gpio>; | |
| interrupts = <1 IRQ_TYPE_EDGE_FALLING>; | |
| }; | |
| }; |