| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/display/solomon,ssd-common.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Common properties for Solomon OLED Display Controllers | |
| maintainers: | |
| - Javier Martinez Canillas <javierm@redhat.com> | |
| properties: | |
| reg: | |
| maxItems: 1 | |
| reset-gpios: | |
| maxItems: 1 | |
| # Only required for SPI | |
| dc-gpios: | |
| description: | |
| GPIO connected to the controller's D/C# (Data/Command) pin, | |
| that is needed for 4-wire SPI to tell the controller if the | |
| data sent is for a command register or the display data RAM | |
| maxItems: 1 | |
| solomon,height: | |
| $ref: /schemas/types.yaml#/definitions/uint32 | |
| description: | |
| Height in pixel of the screen driven by the controller. | |
| The default value is controller-dependent. | |
| solomon,width: | |
| $ref: /schemas/types.yaml#/definitions/uint32 | |
| description: | |
| Width in pixel of the screen driven by the controller. | |
| The default value is controller-dependent. | |
| allOf: | |
| - $ref: /schemas/spi/spi-peripheral-props.yaml# | |
| additionalProperties: true |