| # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/display/msm/qcom,mdp5.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Qualcomm Adreno/Snapdragon Mobile Display controller (MDP5) | |
| description: | |
| MDP5 display controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994 | |
| and MSM8996. | |
| maintainers: | |
| - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> | |
| - Rob Clark <robdclark@gmail.com> | |
| properties: | |
| compatible: | |
| oneOf: | |
| - const: qcom,mdp5 | |
| deprecated: true | |
| - items: | |
| - enum: | |
| - qcom,apq8084-mdp5 | |
| - qcom,msm8226-mdp5 | |
| - qcom,msm8916-mdp5 | |
| - qcom,msm8917-mdp5 | |
| - qcom,msm8937-mdp5 | |
| - qcom,msm8953-mdp5 | |
| - qcom,msm8974-mdp5 | |
| - qcom,msm8976-mdp5 | |
| - qcom,msm8994-mdp5 | |
| - qcom,msm8996-mdp5 | |
| - qcom,sdm630-mdp5 | |
| - qcom,sdm660-mdp5 | |
| - const: qcom,mdp5 | |
| $nodename: | |
| pattern: '^display-controller@[0-9a-f]+$' | |
| reg: | |
| maxItems: 1 | |
| reg-names: | |
| items: | |
| - const: mdp_phys | |
| interrupts: | |
| maxItems: 1 | |
| clocks: | |
| minItems: 4 | |
| maxItems: 7 | |
| clock-names: | |
| oneOf: | |
| - minItems: 4 | |
| items: | |
| - const: iface | |
| - const: bus | |
| - const: core | |
| - const: vsync | |
| - const: tbu | |
| - const: tbu_rt | |
| # MSM8996 has additional iommu clock | |
| - items: | |
| - const: iface | |
| - const: bus | |
| - const: core | |
| - const: iommu | |
| - const: vsync | |
| interconnects: | |
| minItems: 1 | |
| items: | |
| - description: Interconnect path from mdp0 (or a single mdp) port to the data bus | |
| - description: Interconnect path from mdp1 port to the data bus | |
| - description: Interconnect path from rotator port to the data bus | |
| interconnect-names: | |
| minItems: 1 | |
| items: | |
| - const: mdp0-mem | |
| - const: mdp1-mem | |
| - const: rotator-mem | |
| iommus: | |
| items: | |
| - description: apps SMMU with the Stream-ID mask for Hard-Fail port0 | |
| power-domains: | |
| maxItems: 1 | |
| operating-points-v2: true | |
| opp-table: | |
| type: object | |
| ports: | |
| $ref: /schemas/graph.yaml#/properties/ports | |
| description: > | |
| Contains the list of output ports from DPU device. These ports | |
| connect to interfaces that are external to the DPU hardware, | |
| such as DSI, DP etc. MDP5 devices support up to 4 ports: | |
| one or two DSI ports, HDMI and eDP. | |
| patternProperties: | |
| "^port@[0-3]+$": | |
| $ref: /schemas/graph.yaml#/properties/port | |
| # at least one port is required | |
| required: | |
| - port@0 | |
| required: | |
| - compatible | |
| - reg | |
| - reg-names | |
| - clocks | |
| - clock-names | |
| - ports | |
| additionalProperties: false | |
| examples: | |
| - | | |
| #include <dt-bindings/clock/qcom,gcc-msm8916.h> | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> | |
| display-controller@1a01000 { | |
| compatible = "qcom,mdp5"; | |
| reg = <0x1a01000 0x90000>; | |
| reg-names = "mdp_phys"; | |
| interrupt-parent = <&mdss>; | |
| interrupts = <0>; | |
| clocks = <&gcc GCC_MDSS_AHB_CLK>, | |
| <&gcc GCC_MDSS_AXI_CLK>, | |
| <&gcc GCC_MDSS_MDP_CLK>, | |
| <&gcc GCC_MDSS_VSYNC_CLK>; | |
| clock-names = "iface", | |
| "bus", | |
| "core", | |
| "vsync"; | |
| ports { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| port@0 { | |
| reg = <0>; | |
| endpoint { | |
| remote-endpoint = <&dsi0_in>; | |
| }; | |
| }; | |
| }; | |
| }; | |
| ... |