| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/display/mediatek/mediatek,hdmi.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Mediatek HDMI Encoder | |
| maintainers: | |
| - CK Hu <ck.hu@mediatek.com> | |
| - Jitao shi <jitao.shi@mediatek.com> | |
| description: | | |
| The Mediatek HDMI encoder can generate HDMI 1.4a or MHL 2.0 signals from | |
| its parallel input. | |
| properties: | |
| compatible: | |
| enum: | |
| - mediatek,mt2701-hdmi | |
| - mediatek,mt7623-hdmi | |
| - mediatek,mt8167-hdmi | |
| - mediatek,mt8173-hdmi | |
| reg: | |
| maxItems: 1 | |
| interrupts: | |
| maxItems: 1 | |
| clocks: | |
| items: | |
| - description: Pixel Clock | |
| - description: HDMI PLL | |
| - description: Bit Clock | |
| - description: S/PDIF Clock | |
| clock-names: | |
| items: | |
| - const: pixel | |
| - const: pll | |
| - const: bclk | |
| - const: spdif | |
| phys: | |
| maxItems: 1 | |
| phy-names: | |
| items: | |
| - const: hdmi | |
| mediatek,syscon-hdmi: | |
| $ref: /schemas/types.yaml#/definitions/phandle-array | |
| items: | |
| - items: | |
| - description: phandle to system configuration registers | |
| - description: register offset in the system configuration registers | |
| description: | | |
| phandle link and register offset to the system configuration registers. | |
| ports: | |
| $ref: /schemas/graph.yaml#/properties/ports | |
| properties: | |
| port@0: | |
| $ref: /schemas/graph.yaml#/properties/port | |
| description: | | |
| Input port node. This port should be connected to a DPI output port. | |
| port@1: | |
| $ref: /schemas/graph.yaml#/properties/port | |
| description: | | |
| Output port node. This port should be connected to the input port of a connector | |
| node that contains a ddc-i2c-bus property, or to the input port of an attached | |
| bridge chip, such as a SlimPort transmitter. | |
| required: | |
| - port@0 | |
| - port@1 | |
| required: | |
| - compatible | |
| - reg | |
| - interrupts | |
| - clocks | |
| - clock-names | |
| - phys | |
| - phy-names | |
| - mediatek,syscon-hdmi | |
| - ports | |
| additionalProperties: false | |
| examples: | |
| - | | |
| #include <dt-bindings/clock/mt8173-clk.h> | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> | |
| #include <dt-bindings/interrupt-controller/irq.h> | |
| hdmi0: hdmi@14025000 { | |
| compatible = "mediatek,mt8173-hdmi"; | |
| reg = <0x14025000 0x400>; | |
| interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_LOW>; | |
| clocks = <&mmsys CLK_MM_HDMI_PIXEL>, | |
| <&mmsys CLK_MM_HDMI_PLLCK>, | |
| <&mmsys CLK_MM_HDMI_AUDIO>, | |
| <&mmsys CLK_MM_HDMI_SPDIF>; | |
| clock-names = "pixel", "pll", "bclk", "spdif"; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <&hdmi_pin>; | |
| phys = <&hdmi_phy>; | |
| phy-names = "hdmi"; | |
| mediatek,syscon-hdmi = <&mmsys 0x900>; | |
| ports { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| port@0 { | |
| reg = <0>; | |
| hdmi0_in: endpoint { | |
| remote-endpoint = <&dpi0_out>; | |
| }; | |
| }; | |
| port@1 { | |
| reg = <1>; | |
| hdmi0_out: endpoint { | |
| remote-endpoint = <&hdmi_con_in>; | |
| }; | |
| }; | |
| }; | |
| }; | |
| ... |