| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/display/mediatek/mediatek,dp.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: MediaTek Display Port Controller | |
| maintainers: | |
| - Chun-Kuang Hu <chunkuang.hu@kernel.org> | |
| - Jitao shi <jitao.shi@mediatek.com> | |
| description: | | |
| MediaTek DP and eDP are different hardware and there are some features | |
| which are not supported for eDP. For example, audio is not supported for | |
| eDP. Therefore, we need to use two different compatibles to describe them. | |
| In addition, We just need to enable the power domain of DP, so the clock | |
| of DP is generated by itself and we are not using other PLL to generate | |
| clocks. | |
| properties: | |
| compatible: | |
| enum: | |
| - mediatek,mt8188-dp-tx | |
| - mediatek,mt8188-edp-tx | |
| - mediatek,mt8195-dp-tx | |
| - mediatek,mt8195-edp-tx | |
| reg: | |
| maxItems: 1 | |
| nvmem-cells: | |
| maxItems: 1 | |
| description: efuse data for display port calibration | |
| nvmem-cell-names: | |
| const: dp_calibration_data | |
| power-domains: | |
| maxItems: 1 | |
| interrupts: | |
| maxItems: 1 | |
| '#sound-dai-cells': | |
| const: 0 | |
| aux-bus: | |
| $ref: /schemas/display/dp-aux-bus.yaml# | |
| ports: | |
| $ref: /schemas/graph.yaml#/properties/ports | |
| properties: | |
| port@0: | |
| $ref: /schemas/graph.yaml#/properties/port | |
| description: Input endpoint of the controller, usually dp_intf | |
| port@1: | |
| $ref: /schemas/graph.yaml#/$defs/port-base | |
| unevaluatedProperties: false | |
| description: Output endpoint of the controller | |
| properties: | |
| endpoint: | |
| $ref: /schemas/media/video-interfaces.yaml# | |
| unevaluatedProperties: false | |
| properties: | |
| data-lanes: | |
| description: | | |
| number of lanes supported by the hardware. | |
| The possible values: | |
| 0 - For 1 lane enabled in IP. | |
| 0 1 - For 2 lanes enabled in IP. | |
| 0 1 2 3 - For 4 lanes enabled in IP. | |
| minItems: 1 | |
| maxItems: 4 | |
| required: | |
| - data-lanes | |
| required: | |
| - port@0 | |
| - port@1 | |
| max-linkrate-mhz: | |
| enum: [ 1620, 2700, 5400, 8100 ] | |
| description: maximum link rate supported by the hardware. | |
| required: | |
| - compatible | |
| - reg | |
| - interrupts | |
| - ports | |
| - max-linkrate-mhz | |
| allOf: | |
| - $ref: /schemas/sound/dai-common.yaml# | |
| - if: | |
| not: | |
| properties: | |
| compatible: | |
| contains: | |
| enum: | |
| - mediatek,mt8188-dp-tx | |
| - mediatek,mt8195-dp-tx | |
| then: | |
| properties: | |
| '#sound-dai-cells': false | |
| unevaluatedProperties: false | |
| examples: | |
| - | | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> | |
| #include <dt-bindings/power/mt8195-power.h> | |
| dptx@1c600000 { | |
| compatible = "mediatek,mt8195-dp-tx"; | |
| reg = <0x1c600000 0x8000>; | |
| power-domains = <&spm MT8195_POWER_DOMAIN_DP_TX>; | |
| interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH 0>; | |
| max-linkrate-mhz = <8100>; | |
| ports { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| port@0 { | |
| reg = <0>; | |
| dptx_in: endpoint { | |
| remote-endpoint = <&dp_intf0_out>; | |
| }; | |
| }; | |
| port@1 { | |
| reg = <1>; | |
| dptx_out: endpoint { | |
| data-lanes = <0 1 2 3>; | |
| }; | |
| }; | |
| }; | |
| }; |