| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/display/bridge/ps8640.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: MIPI DSI to eDP Video Format Converter | |
| maintainers: | |
| - Nicolas Boichat <drinkcat@chromium.org> | |
| description: | | |
| The PS8640 is a low power MIPI-to-eDP video format converter supporting | |
| mobile devices with embedded panel resolutions up to 2048 x 1536. The | |
| device accepts a single channel of MIPI DSI v1.1, with up to four lanes | |
| plus clock, at a transmission rate up to 1.5Gbit/sec per lane. The | |
| device outputs eDP v1.4, one or two lanes, at a link rate of up to | |
| 3.24Gbit/sec per lane. | |
| properties: | |
| compatible: | |
| const: parade,ps8640 | |
| reg: | |
| maxItems: 1 | |
| description: Base I2C address of the device. | |
| powerdown-gpios: | |
| maxItems: 1 | |
| description: GPIO connected to active low powerdown. | |
| reset-gpios: | |
| maxItems: 1 | |
| description: GPIO connected to active low reset. | |
| vdd12-supply: | |
| description: Regulator for 1.2V digital core power. | |
| vdd33-supply: | |
| description: Regulator for 3.3V digital core power. | |
| aux-bus: | |
| $ref: /schemas/display/dp-aux-bus.yaml# | |
| ports: | |
| $ref: /schemas/graph.yaml#/properties/ports | |
| properties: | |
| port@0: | |
| $ref: /schemas/graph.yaml#/properties/port | |
| description: | |
| Video port for DSI input | |
| port@1: | |
| $ref: /schemas/graph.yaml#/properties/port | |
| description: | |
| Video port for eDP output (panel or connector). | |
| required: | |
| - port@0 | |
| required: | |
| - compatible | |
| - reg | |
| - powerdown-gpios | |
| - reset-gpios | |
| - vdd12-supply | |
| - vdd33-supply | |
| - ports | |
| additionalProperties: false | |
| examples: | |
| - | | |
| #include <dt-bindings/gpio/gpio.h> | |
| i2c { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| ps8640: edp-bridge@18 { | |
| compatible = "parade,ps8640"; | |
| reg = <0x18>; | |
| powerdown-gpios = <&pio 116 GPIO_ACTIVE_LOW>; | |
| reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>; | |
| vdd12-supply = <&ps8640_fixed_1v2>; | |
| vdd33-supply = <&mt6397_vgp2_reg>; | |
| ports { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| port@0 { | |
| reg = <0>; | |
| ps8640_in: endpoint { | |
| remote-endpoint = <&dsi0_out>; | |
| }; | |
| }; | |
| port@1 { | |
| reg = <1>; | |
| ps8640_out: endpoint { | |
| remote-endpoint = <&panel_in>; | |
| }; | |
| }; | |
| }; | |
| aux-bus { | |
| panel { | |
| compatible = "boe,nv133fhm-n62"; | |
| power-supply = <&pp3300_dx_edp>; | |
| backlight = <&backlight>; | |
| port { | |
| panel_in: endpoint { | |
| remote-endpoint = <&ps8640_out>; | |
| }; | |
| }; | |
| }; | |
| }; | |
| }; | |
| }; |