| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/display/arm,malidp.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Arm Mali Display Processor (Mali-DP) | |
| maintainers: | |
| - Liviu Dudau <Liviu.Dudau@arm.com> | |
| - Andre Przywara <andre.przywara@arm.com> | |
| description: | |
| The following bindings apply to a family of Display Processors sold as | |
| licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and | |
| DP650 processors that offer multiple composition layers, support for | |
| rotation and scaling output. | |
| properties: | |
| compatible: | |
| enum: | |
| - arm,mali-dp500 | |
| - arm,mali-dp550 | |
| - arm,mali-dp650 | |
| reg: | |
| maxItems: 1 | |
| interrupts: | |
| items: | |
| - description: | |
| The interrupt used by the Display Engine (DE). Can be shared with | |
| the interrupt for the Scaling Engine (SE), but it will have to be | |
| listed individually. | |
| - description: | |
| The interrupt used by the Scaling Engine (SE). Can be shared with | |
| the interrupt for the Display Engine (DE), but it will have to be | |
| listed individually. | |
| interrupt-names: | |
| items: | |
| - const: DE | |
| - const: SE | |
| clock-names: | |
| items: | |
| - const: pxlclk | |
| - const: mclk | |
| - const: aclk | |
| - const: pclk | |
| clocks: | |
| items: | |
| - description: the pixel clock feeding the output PLL of the processor | |
| - description: the main processor clock | |
| - description: the AXI interface clock | |
| - description: the APB interface clock | |
| memory-region: | |
| maxItems: 1 | |
| description: | |
| Phandle to a node describing memory to be used for the framebuffer. | |
| If not present, the framebuffer may be located anywhere in memory. | |
| arm,malidp-output-port-lines: | |
| $ref: /schemas/types.yaml#/definitions/uint8-array | |
| description: | |
| Number of output lines/bits for each colour channel. | |
| items: | |
| - description: number of output lines for the red channel (R) | |
| - description: number of output lines for the green channel (G) | |
| - description: number of output lines for the blue channel (B) | |
| arm,malidp-arqos-value: | |
| $ref: /schemas/types.yaml#/definitions/uint32 | |
| description: | |
| Quality-of-Service value for the display engine FIFOs, to write | |
| into the RQOS register of the DP500. | |
| See the ARM Mali-DP500 TRM for details on the encoding. | |
| If omitted, the RQOS register will not be changed. | |
| port: | |
| $ref: /schemas/graph.yaml#/properties/port | |
| unevaluatedProperties: false | |
| description: | |
| Output endpoint of the controller, connecting the LCD panel signals. | |
| additionalProperties: false | |
| required: | |
| - compatible | |
| - reg | |
| - interrupts | |
| - interrupt-names | |
| - clocks | |
| - clock-names | |
| - port | |
| - arm,malidp-output-port-lines | |
| examples: | |
| - | | |
| dp0: malidp@6f200000 { | |
| compatible = "arm,mali-dp650"; | |
| reg = <0x6f200000 0x20000>; | |
| memory-region = <&display_reserved>; | |
| interrupts = <168>, <168>; | |
| interrupt-names = "DE", "SE"; | |
| clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>; | |
| clock-names = "pxlclk", "mclk", "aclk", "pclk"; | |
| arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; | |
| arm,malidp-arqos-value = <0xd000d000>; | |
| port { | |
| dp0_output: endpoint { | |
| remote-endpoint = <&tda998x_2_input>; | |
| }; | |
| }; | |
| }; | |
| ... |