| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/clock/ti,lmk04832.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Texas Instruments LMK04832 Clock Controller | |
| maintainers: | |
| - Liam Beguin <liambeguin@gmail.com> | |
| description: | | |
| Devicetree binding for the LMK04832, a clock conditioner with JEDEC JESD204B | |
| support. The LMK04832 is pin compatible with the LMK0482x family. | |
| Link to datasheet, https://www.ti.com/lit/ds/symlink/lmk04832.pdf | |
| properties: | |
| compatible: | |
| enum: | |
| - ti,lmk04832 | |
| reg: | |
| maxItems: 1 | |
| '#address-cells': | |
| const: 1 | |
| '#size-cells': | |
| const: 0 | |
| '#clock-cells': | |
| const: 1 | |
| spi-max-frequency: | |
| maximum: 5000000 | |
| clocks: | |
| items: | |
| - description: PLL2 reference clock. | |
| clock-names: | |
| items: | |
| - const: oscin | |
| reset-gpios: | |
| maxItems: 1 | |
| ti,spi-4wire-rdbk: | |
| description: | | |
| Select SPI 4wire readback pin configuration. | |
| Available readback pins are, | |
| CLKin_SEL0 0 | |
| CLKin_SEL1 1 | |
| RESET 2 | |
| $ref: /schemas/types.yaml#/definitions/uint32 | |
| enum: [0, 1, 2] | |
| default: 1 | |
| ti,vco-hz: | |
| description: Optional to set VCO frequency of the PLL in Hertz. | |
| ti,sysref-ddly: | |
| description: SYSREF digital delay value. | |
| $ref: /schemas/types.yaml#/definitions/uint32 | |
| minimum: 8 | |
| maximum: 8191 | |
| default: 8 | |
| ti,sysref-mux: | |
| description: | | |
| SYSREF Mux configuration. | |
| Available options are, | |
| Normal SYNC 0 | |
| Re-clocked 1 | |
| SYSREF Pulser 2 | |
| SYSREF Continuous 3 | |
| $ref: /schemas/types.yaml#/definitions/uint32 | |
| enum: [0, 1, 2, 3] | |
| default: 3 | |
| ti,sync-mode: | |
| description: SYNC pin configuration. | |
| $ref: /schemas/types.yaml#/definitions/uint32 | |
| enum: [0, 1, 2] | |
| default: 1 | |
| ti,sysref-pulse-count: | |
| description: | |
| Number of SYSREF pulses to send when SYSREF is not in continuous mode. | |
| $ref: /schemas/types.yaml#/definitions/uint32 | |
| enum: [1, 2, 4, 8] | |
| default: 4 | |
| patternProperties: | |
| "@[0-9a-d]+$": | |
| type: object | |
| description: | |
| Child nodes used to configure output clocks. | |
| properties: | |
| reg: | |
| description: | |
| clock output identifier. | |
| minimum: 0 | |
| maximum: 13 | |
| ti,clkout-fmt: | |
| description: | |
| Clock output format. | |
| Available options are, | |
| Powerdown 0x00 | |
| LVDS 0x01 | |
| HSDS 6 mA 0x02 | |
| HSDS 8 mA 0x03 | |
| LVPECL 1600 mV 0x04 | |
| LVPECL 2000 mV 0x05 | |
| LCPECL 0x06 | |
| CML 16 mA 0x07 | |
| CML 24 mA 0x08 | |
| CML 32 mA 0x09 | |
| CMOS (Off/Inverted) 0x0a | |
| CMOS (Normal/Off) 0x0b | |
| CMOS (Inverted/Inverted) 0x0c | |
| CMOS (Inverted/Normal) 0x0d | |
| CMOS (Normal/Inverted) 0x0e | |
| CMOS (Normal/Normal) 0x0f | |
| $ref: /schemas/types.yaml#/definitions/uint32 | |
| minimum: 0 | |
| maximum: 15 | |
| ti,clkout-sysref: | |
| description: | |
| Select SYSREF clock path for output clock. | |
| type: boolean | |
| required: | |
| - reg | |
| additionalProperties: false | |
| required: | |
| - compatible | |
| - reg | |
| - '#clock-cells' | |
| - clocks | |
| - clock-names | |
| additionalProperties: false | |
| examples: | |
| - | | |
| clocks { | |
| lmk04832_oscin: oscin { | |
| compatible = "fixed-clock"; | |
| #clock-cells = <0>; | |
| clock-frequency = <122880000>; | |
| clock-output-names = "lmk04832-oscin"; | |
| }; | |
| }; | |
| spi { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| lmk04832: clock-controller@0 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| reg = <0>; | |
| compatible = "ti,lmk04832"; | |
| spi-max-frequency = <781250>; | |
| reset-gpios = <&gpio_lmk 0 0 0>; | |
| #clock-cells = <1>; | |
| clocks = <&lmk04832_oscin>; | |
| clock-names = "oscin"; | |
| ti,spi-4wire-rdbk = <0>; | |
| ti,vco-hz = <2457600000>; | |
| assigned-clocks = | |
| <&lmk04832 0>, <&lmk04832 1>, | |
| <&lmk04832 2>, <&lmk04832 3>, | |
| <&lmk04832 4>, | |
| <&lmk04832 6>, <&lmk04832 7>, | |
| <&lmk04832 10>, <&lmk04832 11>; | |
| assigned-clock-rates = | |
| <122880000>, <384000>, | |
| <122880000>, <384000>, | |
| <122880000>, | |
| <153600000>, <384000>, | |
| <614400000>, <384000>; | |
| clkout0@0 { | |
| reg = <0>; | |
| ti,clkout-fmt = <0x01>; // LVDS | |
| }; | |
| clkout1@1 { | |
| reg = <1>; | |
| ti,clkout-fmt = <0x01>; // LVDS | |
| ti,clkout-sysref; | |
| }; | |
| }; | |
| }; |