| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/ata/faraday,ftide010.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Faraday Technology FTIDE010 PATA controller | |
| maintainers: | |
| - Linus Walleij <linusw@kernel.org> | |
| description: | | |
| This controller is the first Faraday IDE interface block, used in the | |
| StorLink SL3512 and SL3516, later known as the Cortina Systems Gemini | |
| platform. The controller can do PIO modes 0 through 4, Multi-word DMA | |
| (MWDM) modes 0 through 2 and Ultra DMA modes 0 through 6. | |
| On the Gemini platform, this PATA block is accompanied by a PATA to | |
| SATA bridge in order to support SATA. This is why a phandle to that | |
| controller is compulsory on that platform. | |
| The timing properties are unique per-SoC, not per-board. | |
| properties: | |
| compatible: | |
| oneOf: | |
| - const: faraday,ftide010 | |
| - items: | |
| - const: cortina,gemini-pata | |
| - const: faraday,ftide010 | |
| reg: | |
| maxItems: 1 | |
| interrupts: | |
| maxItems: 1 | |
| clocks: | |
| minItems: 1 | |
| clock-names: | |
| const: PCLK | |
| sata: | |
| description: | |
| phandle to the Gemini PATA to SATA bridge, if available | |
| $ref: /schemas/types.yaml#/definitions/phandle | |
| required: | |
| - compatible | |
| - reg | |
| - interrupts | |
| allOf: | |
| - $ref: pata-common.yaml# | |
| - if: | |
| properties: | |
| compatible: | |
| contains: | |
| const: cortina,gemini-pata | |
| then: | |
| required: | |
| - sata | |
| unevaluatedProperties: false | |
| examples: | |
| - | | |
| #include <dt-bindings/interrupt-controller/irq.h> | |
| #include <dt-bindings/clock/cortina,gemini-clock.h> | |
| ide@63000000 { | |
| compatible = "cortina,gemini-pata", "faraday,ftide010"; | |
| reg = <0x63000000 0x100>; | |
| interrupts = <4 IRQ_TYPE_EDGE_RISING>; | |
| clocks = <&gcc GEMINI_CLK_GATE_IDE>; | |
| clock-names = "PCLK"; | |
| sata = <&sata>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| ide-port@0 { | |
| reg = <0>; | |
| }; | |
| ide-port@1 { | |
| reg = <1>; | |
| }; | |
| }; | |
| ... |