| What: /sys/devices/platform/silicom-platform/uc_version | |
| Date: November 2023 | |
| KernelVersion: 6.7 | |
| Contact: Henry Shi <henrys@silicom-usa.com> | |
| Description: | |
| This file allows to read microcontroller firmware | |
| version of current platform. | |
| What: /sys/devices/platform/silicom-platform/power_cycle | |
| Date: November 2023 | |
| KernelVersion: 6.7 | |
| Contact: Henry Shi <henrys@silicom-usa.com> | |
| Description: | |
| This file allow user to power cycle the platform. | |
| Default value is 0; when set to 1, it powers down | |
| the platform, waits 5 seconds, then powers on the | |
| device. It returns to default value after power cycle. | |
| 0 - default value. | |
| What: /sys/devices/platform/silicom-platform/efuse_status | |
| Date: November 2023 | |
| KernelVersion: 6.7 | |
| Contact: Henry Shi <henrys@silicom-usa.com> | |
| Description: | |
| This file is read only. It returns the current | |
| OTP status: | |
| 0 - not programmed. | |
| 1 - programmed. |