| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/mmc/ti,omap2430-sdhci.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: TI OMAP SDHCI Controller |
| |
| maintainers: |
| - Kishon Vijay Abraham I <kishon@ti.com> |
| |
| description: |
| For UHS devices which require tuning, the device tree should have a |
| cpu_thermal node which maps to the appropriate thermal zone. This |
| is used to get the temperature of the zone during tuning. |
| |
| properties: |
| compatible: |
| enum: |
| - ti,omap2430-sdhci |
| - ti,omap3-sdhci |
| - ti,omap4-sdhci |
| - ti,omap5-sdhci |
| - ti,dra7-sdhci |
| - ti,k2g-sdhci |
| - ti,am335-sdhci |
| - ti,am437-sdhci |
| |
| reg: |
| maxItems: 1 |
| |
| interrupts: |
| maxItems: 1 |
| |
| clocks: |
| maxItems: 2 |
| |
| clock-names: |
| items: |
| - const: fck |
| - const: mmchsdb_fck |
| |
| dmas: |
| maxItems: 2 |
| |
| dma-names: |
| items: |
| - const: tx |
| - const: rx |
| |
| pinctrl-names: |
| minItems: 1 |
| maxItems: 14 |
| items: |
| enum: |
| - default |
| - default-rev11 |
| - hs |
| - sdr12 |
| - sdr12-rev11 |
| - sdr25 |
| - sdr25-rev11 |
| - sdr50 |
| - ddr50-rev11 |
| - sdr104-rev11 |
| - ddr50 |
| - sdr104 |
| - ddr_1_8v-rev11 |
| - ddr_1_8v |
| - ddr_3_3v |
| - hs-rev11 |
| - hs200_1_8v-rev11 |
| - hs200_1_8v |
| - sleep |
| |
| pinctrl-0: |
| maxItems: 1 |
| |
| pinctrl-1: |
| maxItems: 1 |
| |
| pinctrl-2: |
| maxItems: 1 |
| |
| pinctrl-3: |
| maxItems: 1 |
| |
| pinctrl-4: |
| maxItems: 1 |
| |
| pinctrl-5: |
| maxItems: 1 |
| |
| pinctrl-6: |
| maxItems: 1 |
| |
| pinctrl-7: |
| maxItems: 1 |
| |
| pinctrl-8: |
| maxItems: 1 |
| |
| power-domains: |
| maxItems: 1 |
| |
| pbias-supply: |
| description: |
| It is used to specify the voltage regulator that provides the bias |
| voltage for certain analog or I/O pads. |
| |
| ti,non-removable: |
| description: |
| It indicates that a component is not meant to be easily removed or |
| replaced by the user, such as an embedded battery or a non-removable |
| storage slot like eMMC. |
| type: boolean |
| deprecated: true |
| |
| clock-frequency: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| description: |
| It represents the speed at which a clock signal associated with a device |
| or bus operates, measured in Hertz (Hz). This value is crucial for configuring |
| hardware components that require a specific clock speed. |
| |
| required: |
| - compatible |
| - reg |
| - interrupts |
| |
| allOf: |
| - $ref: sdhci-common.yaml# |
| - if: |
| properties: |
| compatible: |
| contains: |
| enum: |
| - ti,dra7-sdhci |
| - ti,k2g-sdhci |
| then: |
| required: |
| - max-frequency |
| - if: |
| properties: |
| compatible: |
| contains: |
| const: ti,k2g-sdhci |
| then: |
| required: |
| - clocks |
| - clock-names |
| |
| unevaluatedProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| mmc@4809c000 { |
| compatible = "ti,dra7-sdhci"; |
| reg = <0x4809c000 0x400>; |
| interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; |
| max-frequency = <192000000>; |
| sdhci-caps-mask = <0x0 0x400000>; |
| bus-width = <4>; |
| vmmc-supply = <&vmmc>; /* phandle to regulator node */ |
| dmas = <&sdma 61>, <&sdma 62>; |
| dma-names = "tx", "rx"; |
| }; |
| ... |
