| // SPDX-License-Identifier: GPL-2.0-only OR MIT |
| |
| #include <dt-bindings/clock/mediatek,mt7988-clk.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/phy/phy.h> |
| #include <dt-bindings/pinctrl/mt65xx.h> |
| #include <dt-bindings/reset/mediatek,mt7988-resets.h> |
| |
| / { |
| compatible = "mediatek,mt7988a"; |
| interrupt-parent = <&gic>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| compatible = "arm,cortex-a73"; |
| reg = <0x0>; |
| device_type = "cpu"; |
| enable-method = "psci"; |
| clocks = <&mcusys CLK_MCU_ARM_DIV_SEL>, |
| <&topckgen CLK_TOP_XTAL>; |
| clock-names = "cpu", "intermediate"; |
| operating-points-v2 = <&cluster0_opp>; |
| }; |
| |
| cpu1: cpu@1 { |
| compatible = "arm,cortex-a73"; |
| reg = <0x1>; |
| device_type = "cpu"; |
| enable-method = "psci"; |
| clocks = <&mcusys CLK_MCU_ARM_DIV_SEL>, |
| <&topckgen CLK_TOP_XTAL>; |
| clock-names = "cpu", "intermediate"; |
| operating-points-v2 = <&cluster0_opp>; |
| }; |
| |
| cpu2: cpu@2 { |
| compatible = "arm,cortex-a73"; |
| reg = <0x2>; |
| device_type = "cpu"; |
| enable-method = "psci"; |
| clocks = <&mcusys CLK_MCU_ARM_DIV_SEL>, |
| <&topckgen CLK_TOP_XTAL>; |
| clock-names = "cpu", "intermediate"; |
| operating-points-v2 = <&cluster0_opp>; |
| }; |
| |
| cpu3: cpu@3 { |
| compatible = "arm,cortex-a73"; |
| reg = <0x3>; |
| device_type = "cpu"; |
| enable-method = "psci"; |
| clocks = <&mcusys CLK_MCU_ARM_DIV_SEL>, |
| <&topckgen CLK_TOP_XTAL>; |
| clock-names = "cpu", "intermediate"; |
| operating-points-v2 = <&cluster0_opp>; |
| }; |
| |
| cluster0_opp: opp-table-0 { |
| compatible = "operating-points-v2"; |
| opp-shared; |
| |
| opp-800000000 { |
| opp-hz = /bits/ 64 <800000000>; |
| opp-microvolt = <850000>; |
| }; |
| opp-1100000000 { |
| opp-hz = /bits/ 64 <1100000000>; |
| opp-microvolt = <850000>; |
| }; |
| opp-1500000000 { |
| opp-hz = /bits/ 64 <1500000000>; |
| opp-microvolt = <850000>; |
| }; |
| opp-1800000000 { |
| opp-hz = /bits/ 64 <1800000000>; |
| opp-microvolt = <900000>; |
| }; |
| }; |
| }; |
| |
| oscillator-40m { |
| compatible = "fixed-clock"; |
| clock-frequency = <40000000>; |
| #clock-cells = <0>; |
| clock-output-names = "clkxtal"; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a73-pmu"; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| |
| psci { |
| compatible = "arm,psci-0.2"; |
| method = "smc"; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| /* 320 KiB reserved for ARM Trusted Firmware (BL31 and BL32) */ |
| secmon@43000000 { |
| reg = <0 0x43000000 0 0x50000>; |
| no-map; |
| }; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| ranges; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| gic: interrupt-controller@c000000 { |
| compatible = "arm,gic-v3"; |
| reg = <0 0x0c000000 0 0x40000>, /* GICD */ |
| <0 0x0c080000 0 0x200000>, /* GICR */ |
| <0 0x0c400000 0 0x2000>, /* GICC */ |
| <0 0x0c410000 0 0x1000>, /* GICH */ |
| <0 0x0c420000 0 0x2000>; /* GICV */ |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| }; |
| |
| infracfg: clock-controller@10001000 { |
| compatible = "mediatek,mt7988-infracfg", "syscon"; |
| reg = <0 0x10001000 0 0x1000>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| topckgen: clock-controller@1001b000 { |
| compatible = "mediatek,mt7988-topckgen", "syscon"; |
| reg = <0 0x1001b000 0 0x1000>; |
| #clock-cells = <1>; |
| }; |
| |
| watchdog: watchdog@1001c000 { |
| compatible = "mediatek,mt7988-wdt"; |
| reg = <0 0x1001c000 0 0x1000>; |
| interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; |
| #reset-cells = <1>; |
| }; |
| |
| apmixedsys: clock-controller@1001e000 { |
| compatible = "mediatek,mt7988-apmixedsys"; |
| reg = <0 0x1001e000 0 0x1000>; |
| #clock-cells = <1>; |
| }; |
| |
| pio: pinctrl@1001f000 { |
| compatible = "mediatek,mt7988-pinctrl"; |
| reg = <0 0x1001f000 0 0x1000>, |
| <0 0x11c10000 0 0x1000>, |
| <0 0x11d00000 0 0x1000>, |
| <0 0x11d20000 0 0x1000>, |
| <0 0x11e00000 0 0x1000>, |
| <0 0x11f00000 0 0x1000>, |
| <0 0x1000b000 0 0x1000>; |
| reg-names = "gpio", "iocfg_tr", |
| "iocfg_br", "iocfg_rb", |
| "iocfg_lb", "iocfg_tl", "eint"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&pio 0 0 84>; |
| interrupt-controller; |
| interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-parent = <&gic>; |
| #interrupt-cells = <2>; |
| |
| pcie0_pins: pcie0-pins { |
| mux { |
| function = "pcie"; |
| groups = "pcie_2l_0_pereset", "pcie_clk_req_n0_0", |
| "pcie_wake_n0_0"; |
| }; |
| }; |
| |
| pcie1_pins: pcie1-pins { |
| mux { |
| function = "pcie"; |
| groups = "pcie_2l_1_pereset", "pcie_clk_req_n1", |
| "pcie_wake_n1_0"; |
| }; |
| }; |
| |
| pcie2_pins: pcie2-pins { |
| mux { |
| function = "pcie"; |
| groups = "pcie_1l_0_pereset", "pcie_clk_req_n2_0", |
| "pcie_wake_n2_0"; |
| }; |
| }; |
| |
| pcie3_pins: pcie3-pins { |
| mux { |
| function = "pcie"; |
| groups = "pcie_1l_1_pereset", "pcie_clk_req_n3", |
| "pcie_wake_n3_0"; |
| }; |
| }; |
| }; |
| |
| pwm: pwm@10048000 { |
| compatible = "mediatek,mt7988-pwm"; |
| reg = <0 0x10048000 0 0x1000>; |
| clocks = <&infracfg CLK_INFRA_66M_PWM_BCK>, |
| <&infracfg CLK_INFRA_66M_PWM_HCK>, |
| <&infracfg CLK_INFRA_66M_PWM_CK1>, |
| <&infracfg CLK_INFRA_66M_PWM_CK2>, |
| <&infracfg CLK_INFRA_66M_PWM_CK3>, |
| <&infracfg CLK_INFRA_66M_PWM_CK4>, |
| <&infracfg CLK_INFRA_66M_PWM_CK5>, |
| <&infracfg CLK_INFRA_66M_PWM_CK6>, |
| <&infracfg CLK_INFRA_66M_PWM_CK7>, |
| <&infracfg CLK_INFRA_66M_PWM_CK8>; |
| clock-names = "top", "main", "pwm1", "pwm2", "pwm3", |
| "pwm4", "pwm5", "pwm6", "pwm7", "pwm8"; |
| #pwm-cells = <2>; |
| status = "disabled"; |
| }; |
| |
| mcusys: mcusys@100e0000 { |
| compatible = "mediatek,mt7988-mcusys", "syscon"; |
| reg = <0 0x100e0000 0 0x1000>; |
| #clock-cells = <1>; |
| }; |
| |
| serial0: serial@11000000 { |
| compatible = "mediatek,mt7988-uart", "mediatek,mt6577-uart"; |
| reg = <0 0x11000000 0 0x100>; |
| interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "uart", "wakeup"; |
| clocks = <&topckgen CLK_TOP_UART_SEL>, |
| <&infracfg CLK_INFRA_52M_UART0_CK>; |
| clock-names = "baud", "bus"; |
| status = "disabled"; |
| }; |
| |
| serial@11000100 { |
| compatible = "mediatek,mt7988-uart", "mediatek,mt6577-uart"; |
| reg = <0 0x11000100 0 0x100>; |
| interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "uart", "wakeup"; |
| clocks = <&topckgen CLK_TOP_UART_SEL>, |
| <&infracfg CLK_INFRA_52M_UART1_CK>; |
| clock-names = "baud", "bus"; |
| status = "disabled"; |
| }; |
| |
| serial@11000200 { |
| compatible = "mediatek,mt7988-uart", "mediatek,mt6577-uart"; |
| reg = <0 0x11000200 0 0x100>; |
| interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "uart", "wakeup"; |
| clocks = <&topckgen CLK_TOP_UART_SEL>, |
| <&infracfg CLK_INFRA_52M_UART2_CK>; |
| clock-names = "baud", "bus"; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@11003000 { |
| compatible = "mediatek,mt7981-i2c"; |
| reg = <0 0x11003000 0 0x1000>, |
| <0 0x10217080 0 0x80>; |
| interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; |
| clock-div = <1>; |
| clocks = <&infracfg CLK_INFRA_I2C_BCK>, |
| <&infracfg CLK_INFRA_66M_AP_DMA_BCK>; |
| clock-names = "main", "dma"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@11004000 { |
| compatible = "mediatek,mt7981-i2c"; |
| reg = <0 0x11004000 0 0x1000>, |
| <0 0x10217100 0 0x80>; |
| interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; |
| clock-div = <1>; |
| clocks = <&infracfg CLK_INFRA_I2C_BCK>, |
| <&infracfg CLK_INFRA_66M_AP_DMA_BCK>; |
| clock-names = "main", "dma"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@11005000 { |
| compatible = "mediatek,mt7981-i2c"; |
| reg = <0 0x11005000 0 0x1000>, |
| <0 0x10217180 0 0x80>; |
| interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; |
| clock-div = <1>; |
| clocks = <&infracfg CLK_INFRA_I2C_BCK>, |
| <&infracfg CLK_INFRA_66M_AP_DMA_BCK>; |
| clock-names = "main", "dma"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| lvts: lvts@1100a000 { |
| compatible = "mediatek,mt7988-lvts-ap"; |
| #thermal-sensor-cells = <1>; |
| reg = <0 0x1100a000 0 0x1000>; |
| clocks = <&infracfg CLK_INFRA_26M_THERM_SYSTEM>; |
| interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; |
| resets = <&infracfg MT7988_INFRA_RST1_THERM_CTRL_SWRST>; |
| nvmem-cells = <&lvts_calibration>; |
| nvmem-cell-names = "lvts-calib-data-1"; |
| }; |
| |
| usb@11190000 { |
| compatible = "mediatek,mt7988-xhci", "mediatek,mtk-xhci"; |
| reg = <0 0x11190000 0 0x2e00>, |
| <0 0x11193e00 0 0x0100>; |
| reg-names = "mac", "ippc"; |
| interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&infracfg CLK_INFRA_USB_SYS>, |
| <&infracfg CLK_INFRA_USB_REF>, |
| <&infracfg CLK_INFRA_66M_USB_HCK>, |
| <&infracfg CLK_INFRA_133M_USB_HCK>, |
| <&infracfg CLK_INFRA_USB_XHCI>; |
| clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck"; |
| status = "disabled"; |
| }; |
| |
| ssusb1: usb@11200000 { |
| compatible = "mediatek,mt7988-xhci", "mediatek,mtk-xhci"; |
| reg = <0 0x11200000 0 0x2e00>, |
| <0 0x11203e00 0 0x0100>; |
| reg-names = "mac", "ippc"; |
| interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&infracfg CLK_INFRA_USB_SYS_CK_P1>, |
| <&infracfg CLK_INFRA_USB_CK_P1>, |
| <&infracfg CLK_INFRA_66M_USB_HCK_CK_P1>, |
| <&infracfg CLK_INFRA_133M_USB_HCK_CK_P1>, |
| <&infracfg CLK_INFRA_USB_XHCI_CK_P1>; |
| clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck"; |
| phys = <&tphyu2port0 PHY_TYPE_USB2>, |
| <&tphyu3port0 PHY_TYPE_USB3>; |
| status = "disabled"; |
| }; |
| |
| mmc0: mmc@11230000 { |
| compatible = "mediatek,mt7988-mmc"; |
| reg = <0 0x11230000 0 0x1000>, |
| <0 0x11D60000 0 0x1000>; |
| interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&infracfg CLK_INFRA_MSDC400>, |
| <&infracfg CLK_INFRA_MSDC2_HCK>, |
| <&infracfg CLK_INFRA_66M_MSDC_0_HCK>, |
| <&infracfg CLK_INFRA_133M_MSDC_0_HCK>; |
| assigned-clocks = <&topckgen CLK_TOP_EMMC_250M_SEL>, |
| <&topckgen CLK_TOP_EMMC_400M_SEL>; |
| assigned-clock-parents = <&topckgen CLK_TOP_NET1PLL_D5_D2>, |
| <&apmixedsys CLK_APMIXED_MSDCPLL>; |
| clock-names = "source", "hclk", "axi_cg", "ahb_cg"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| pcie2: pcie@11280000 { |
| compatible = "mediatek,mt7986-pcie", |
| "mediatek,mt8192-pcie"; |
| device_type = "pci"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| reg = <0 0x11280000 0 0x2000>; |
| reg-names = "pcie-mac"; |
| linux,pci-domain = <3>; |
| interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; |
| bus-range = <0x00 0xff>; |
| ranges = <0x81000000 0x00 0x20000000 0x00 |
| 0x20000000 0x00 0x00200000>, |
| <0x82000000 0x00 0x20200000 0x00 |
| 0x20200000 0x00 0x07e00000>; |
| clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P2>, |
| <&infracfg CLK_INFRA_PCIE_GFMUX_TL_P2>, |
| <&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P2>, |
| <&infracfg CLK_INFRA_133M_PCIE_CK_P2>; |
| clock-names = "pl_250m", "tl_26m", "peri_26m", |
| "top_133m"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pcie2_pins>; |
| status = "disabled"; |
| |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0x7>; |
| interrupt-map = <0 0 0 1 &pcie_intc2 0>, |
| <0 0 0 2 &pcie_intc2 1>, |
| <0 0 0 3 &pcie_intc2 2>, |
| <0 0 0 4 &pcie_intc2 3>; |
| pcie_intc2: interrupt-controller { |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| }; |
| }; |
| |
| pcie3: pcie@11290000 { |
| compatible = "mediatek,mt7986-pcie", |
| "mediatek,mt8192-pcie"; |
| device_type = "pci"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| reg = <0 0x11290000 0 0x2000>; |
| reg-names = "pcie-mac"; |
| linux,pci-domain = <2>; |
| interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; |
| bus-range = <0x00 0xff>; |
| ranges = <0x81000000 0x00 0x28000000 0x00 |
| 0x28000000 0x00 0x00200000>, |
| <0x82000000 0x00 0x28200000 0x00 |
| 0x28200000 0x00 0x07e00000>; |
| clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P3>, |
| <&infracfg CLK_INFRA_PCIE_GFMUX_TL_P3>, |
| <&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P3>, |
| <&infracfg CLK_INFRA_133M_PCIE_CK_P3>; |
| clock-names = "pl_250m", "tl_26m", "peri_26m", |
| "top_133m"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pcie3_pins>; |
| status = "disabled"; |
| |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0x7>; |
| interrupt-map = <0 0 0 1 &pcie_intc3 0>, |
| <0 0 0 2 &pcie_intc3 1>, |
| <0 0 0 3 &pcie_intc3 2>, |
| <0 0 0 4 &pcie_intc3 3>; |
| pcie_intc3: interrupt-controller { |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| }; |
| }; |
| |
| pcie0: pcie@11300000 { |
| compatible = "mediatek,mt7986-pcie", |
| "mediatek,mt8192-pcie"; |
| device_type = "pci"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| reg = <0 0x11300000 0 0x2000>; |
| reg-names = "pcie-mac"; |
| linux,pci-domain = <0>; |
| interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; |
| bus-range = <0x00 0xff>; |
| ranges = <0x81000000 0x00 0x30000000 0x00 |
| 0x30000000 0x00 0x00200000>, |
| <0x82000000 0x00 0x30200000 0x00 |
| 0x30200000 0x00 0x07e00000>; |
| clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P0>, |
| <&infracfg CLK_INFRA_PCIE_GFMUX_TL_P0>, |
| <&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P0>, |
| <&infracfg CLK_INFRA_133M_PCIE_CK_P0>; |
| clock-names = "pl_250m", "tl_26m", "peri_26m", |
| "top_133m"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pcie0_pins>; |
| status = "disabled"; |
| |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0x7>; |
| interrupt-map = <0 0 0 1 &pcie_intc0 0>, |
| <0 0 0 2 &pcie_intc0 1>, |
| <0 0 0 3 &pcie_intc0 2>, |
| <0 0 0 4 &pcie_intc0 3>; |
| pcie_intc0: interrupt-controller { |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| }; |
| }; |
| |
| pcie1: pcie@11310000 { |
| compatible = "mediatek,mt7986-pcie", |
| "mediatek,mt8192-pcie"; |
| device_type = "pci"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| reg = <0 0x11310000 0 0x2000>; |
| reg-names = "pcie-mac"; |
| linux,pci-domain = <1>; |
| interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; |
| bus-range = <0x00 0xff>; |
| ranges = <0x81000000 0x00 0x38000000 0x00 |
| 0x38000000 0x00 0x00200000>, |
| <0x82000000 0x00 0x38200000 0x00 |
| 0x38200000 0x00 0x07e00000>; |
| clocks = <&infracfg CLK_INFRA_PCIE_PIPE_P1>, |
| <&infracfg CLK_INFRA_PCIE_GFMUX_TL_P1>, |
| <&infracfg CLK_INFRA_PCIE_PERI_26M_CK_P1>, |
| <&infracfg CLK_INFRA_133M_PCIE_CK_P1>; |
| clock-names = "pl_250m", "tl_26m", "peri_26m", |
| "top_133m"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pcie1_pins>; |
| status = "disabled"; |
| |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0x7>; |
| interrupt-map = <0 0 0 1 &pcie_intc1 0>, |
| <0 0 0 2 &pcie_intc1 1>, |
| <0 0 0 3 &pcie_intc1 2>, |
| <0 0 0 4 &pcie_intc1 3>; |
| pcie_intc1: interrupt-controller { |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| }; |
| }; |
| |
| tphy: t-phy@11c50000 { |
| compatible = "mediatek,mt7986-tphy", |
| "mediatek,generic-tphy-v2"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| status = "disabled"; |
| |
| tphyu2port0: usb-phy@11c50000 { |
| reg = <0 0x11c50000 0 0x700>; |
| clocks = <&infracfg CLK_INFRA_USB_UTMI_CK_P1>; |
| clock-names = "ref"; |
| #phy-cells = <1>; |
| }; |
| |
| tphyu3port0: usb-phy@11c50700 { |
| reg = <0 0x11c50700 0 0x900>; |
| clocks = <&infracfg CLK_INFRA_USB_PIPE_CK_P1>; |
| clock-names = "ref"; |
| #phy-cells = <1>; |
| }; |
| }; |
| |
| clock-controller@11f40000 { |
| compatible = "mediatek,mt7988-xfi-pll"; |
| reg = <0 0x11f40000 0 0x1000>; |
| resets = <&watchdog 16>; |
| #clock-cells = <1>; |
| }; |
| |
| efuse@11f50000 { |
| compatible = "mediatek,mt7988-efuse", "mediatek,efuse"; |
| reg = <0 0x11f50000 0 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| lvts_calibration: calib@918 { |
| reg = <0x918 0x28>; |
| }; |
| }; |
| |
| clock-controller@15000000 { |
| compatible = "mediatek,mt7988-ethsys", "syscon"; |
| reg = <0 0x15000000 0 0x1000>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| clock-controller@15031000 { |
| compatible = "mediatek,mt7988-ethwarp"; |
| reg = <0 0x15031000 0 0x1000>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| }; |
| |
| thermal-zones { |
| cpu_thermal: cpu-thermal { |
| polling-delay-passive = <1000>; |
| polling-delay = <1000>; |
| thermal-sensors = <&lvts 0>; |
| trips { |
| cpu_trip_crit: crit { |
| temperature = <125000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| }; |
