| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2013-2017 ARM Limited, All Rights Reserved. |
| * Author: Marc Zyngier <marc.zyngier@arm.com> |
| */ |
| |
| #define pr_fmt(fmt) "GICv3: " fmt |
| |
| #include <linux/acpi.h> |
| #include <linux/cpu.h> |
| #include <linux/cpu_pm.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/irqdomain.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <linux/percpu.h> |
| #include <linux/refcount.h> |
| #include <linux/slab.h> |
| #include <linux/wakeup_reason.h> |
| |
| |
| #include <linux/irqchip.h> |
| #include <linux/irqchip/arm-gic-common.h> |
| #include <linux/irqchip/arm-gic-v3.h> |
| #include <linux/irqchip/irq-partition-percpu.h> |
| |
| #include <asm/cputype.h> |
| #include <asm/exception.h> |
| #include <asm/smp_plat.h> |
| #include <asm/virt.h> |
| |
| #include "irq-gic-common.h" |
| |
| #define GICD_INT_NMI_PRI (GICD_INT_DEF_PRI & ~0x80) |
| |
| #define FLAGS_WORKAROUND_GICR_WAKER_MSM8996 (1ULL << 0) |
| #define FLAGS_WORKAROUND_CAVIUM_ERRATUM_38539 (1ULL << 1) |
| |
| #define GIC_IRQ_TYPE_PARTITION (GIC_IRQ_TYPE_LPI + 1) |
| |
| struct redist_region { |
| void __iomem *redist_base; |
| phys_addr_t phys_base; |
| bool single_redist; |
| }; |
| |
| struct gic_chip_data { |
| struct fwnode_handle *fwnode; |
| void __iomem *dist_base; |
| struct redist_region *redist_regions; |
| struct rdists rdists; |
| struct irq_domain *domain; |
| u64 redist_stride; |
| u32 nr_redist_regions; |
| u64 flags; |
| bool has_rss; |
| unsigned int ppi_nr; |
| struct partition_desc **ppi_descs; |
| }; |
| |
| static struct gic_chip_data gic_data __read_mostly; |
| static DEFINE_STATIC_KEY_TRUE(supports_deactivate_key); |
| |
| #define GIC_ID_NR (1U << GICD_TYPER_ID_BITS(gic_data.rdists.gicd_typer)) |
| #define GIC_LINE_NR min(GICD_TYPER_SPIS(gic_data.rdists.gicd_typer), 1020U) |
| #define GIC_ESPI_NR GICD_TYPER_ESPIS(gic_data.rdists.gicd_typer) |
| |
| /* |
| * The behaviours of RPR and PMR registers differ depending on the value of |
| * SCR_EL3.FIQ, and the behaviour of non-secure priority registers of the |
| * distributor and redistributors depends on whether security is enabled in the |
| * GIC. |
| * |
| * When security is enabled, non-secure priority values from the (re)distributor |
| * are presented to the GIC CPUIF as follow: |
| * (GIC_(R)DIST_PRI[irq] >> 1) | 0x80; |
| * |
| * If SCR_EL3.FIQ == 1, the values written to/read from PMR and RPR at non-secure |
| * EL1 are subject to a similar operation thus matching the priorities presented |
| * from the (re)distributor when security is enabled. When SCR_EL3.FIQ == 0, |
| * these values are unchanged by the GIC. |
| * |
| * see GICv3/GICv4 Architecture Specification (IHI0069D): |
| * - section 4.8.1 Non-secure accesses to register fields for Secure interrupt |
| * priorities. |
| * - Figure 4-7 Secure read of the priority field for a Non-secure Group 1 |
| * interrupt. |
| */ |
| static DEFINE_STATIC_KEY_FALSE(supports_pseudo_nmis); |
| |
| /* |
| * Global static key controlling whether an update to PMR allowing more |
| * interrupts requires to be propagated to the redistributor (DSB SY). |
| * And this needs to be exported for modules to be able to enable |
| * interrupts... |
| */ |
| DEFINE_STATIC_KEY_FALSE(gic_pmr_sync); |
| EXPORT_SYMBOL(gic_pmr_sync); |
| |
| DEFINE_STATIC_KEY_FALSE(gic_nonsecure_priorities); |
| EXPORT_SYMBOL(gic_nonsecure_priorities); |
| |
| /* |
| * When the Non-secure world has access to group 0 interrupts (as a |
| * consequence of SCR_EL3.FIQ == 0), reading the ICC_RPR_EL1 register will |
| * return the Distributor's view of the interrupt priority. |
| * |
| * When GIC security is enabled (GICD_CTLR.DS == 0), the interrupt priority |
| * written by software is moved to the Non-secure range by the Distributor. |
| * |
| * If both are true (which is when gic_nonsecure_priorities gets enabled), |
| * we need to shift down the priority programmed by software to match it |
| * against the value returned by ICC_RPR_EL1. |
| */ |
| #define GICD_INT_RPR_PRI(priority) \ |
| ({ \ |
| u32 __priority = (priority); \ |
| if (static_branch_unlikely(&gic_nonsecure_priorities)) \ |
| __priority = 0x80 | (__priority >> 1); \ |
| \ |
| __priority; \ |
| }) |
| |
| /* ppi_nmi_refs[n] == number of cpus having ppi[n + 16] set as NMI */ |
| static refcount_t *ppi_nmi_refs; |
| |
| static struct gic_kvm_info gic_v3_kvm_info __initdata; |
| static DEFINE_PER_CPU(bool, has_rss); |
| |
| #define MPIDR_RS(mpidr) (((mpidr) & 0xF0UL) >> 4) |
| #define gic_data_rdist() (this_cpu_ptr(gic_data.rdists.rdist)) |
| #define gic_data_rdist_rd_base() (gic_data_rdist()->rd_base) |
| #define gic_data_rdist_sgi_base() (gic_data_rdist_rd_base() + SZ_64K) |
| |
| /* Our default, arbitrary priority value. Linux only uses one anyway. */ |
| #define DEFAULT_PMR_VALUE 0xf0 |
| |
| enum gic_intid_range { |
| SGI_RANGE, |
| PPI_RANGE, |
| SPI_RANGE, |
| EPPI_RANGE, |
| ESPI_RANGE, |
| LPI_RANGE, |
| __INVALID_RANGE__ |
| }; |
| |
| static enum gic_intid_range __get_intid_range(irq_hw_number_t hwirq) |
| { |
| switch (hwirq) { |
| case 0 ... 15: |
| return SGI_RANGE; |
| case 16 ... 31: |
| return PPI_RANGE; |
| case 32 ... 1019: |
| return SPI_RANGE; |
| case EPPI_BASE_INTID ... (EPPI_BASE_INTID + 63): |
| return EPPI_RANGE; |
| case ESPI_BASE_INTID ... (ESPI_BASE_INTID + 1023): |
| return ESPI_RANGE; |
| case 8192 ... GENMASK(23, 0): |
| return LPI_RANGE; |
| default: |
| return __INVALID_RANGE__; |
| } |
| } |
| |
| static enum gic_intid_range get_intid_range(struct irq_data *d) |
| { |
| return __get_intid_range(d->hwirq); |
| } |
| |
| static inline unsigned int gic_irq(struct irq_data *d) |
| { |
| return d->hwirq; |
| } |
| |
| static inline bool gic_irq_in_rdist(struct irq_data *d) |
| { |
| switch (get_intid_range(d)) { |
| case SGI_RANGE: |
| case PPI_RANGE: |
| case EPPI_RANGE: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static inline void __iomem *gic_dist_base(struct irq_data *d) |
| { |
| switch (get_intid_range(d)) { |
| case SGI_RANGE: |
| case PPI_RANGE: |
| case EPPI_RANGE: |
| /* SGI+PPI -> SGI_base for this CPU */ |
| return gic_data_rdist_sgi_base(); |
| |
| case SPI_RANGE: |
| case ESPI_RANGE: |
| /* SPI -> dist_base */ |
| return gic_data.dist_base; |
| |
| default: |
| return NULL; |
| } |
| } |
| |
| static void gic_do_wait_for_rwp(void __iomem *base, u32 bit) |
| { |
| u32 count = 1000000; /* 1s! */ |
| |
| while (readl_relaxed(base + GICD_CTLR) & bit) { |
| count--; |
| if (!count) { |
| pr_err_ratelimited("RWP timeout, gone fishing\n"); |
| return; |
| } |
| cpu_relax(); |
| udelay(1); |
| } |
| } |
| |
| /* Wait for completion of a distributor change */ |
| static void gic_dist_wait_for_rwp(void) |
| { |
| gic_do_wait_for_rwp(gic_data.dist_base, GICD_CTLR_RWP); |
| } |
| |
| /* Wait for completion of a redistributor change */ |
| static void gic_redist_wait_for_rwp(void) |
| { |
| gic_do_wait_for_rwp(gic_data_rdist_rd_base(), GICR_CTLR_RWP); |
| } |
| |
| #ifdef CONFIG_ARM64 |
| |
| static u64 __maybe_unused gic_read_iar(void) |
| { |
| if (cpus_have_const_cap(ARM64_WORKAROUND_CAVIUM_23154)) |
| return gic_read_iar_cavium_thunderx(); |
| else |
| return gic_read_iar_common(); |
| } |
| #endif |
| |
| static void gic_enable_redist(bool enable) |
| { |
| void __iomem *rbase; |
| u32 count = 1000000; /* 1s! */ |
| u32 val; |
| |
| if (gic_data.flags & FLAGS_WORKAROUND_GICR_WAKER_MSM8996) |
| return; |
| |
| rbase = gic_data_rdist_rd_base(); |
| |
| val = readl_relaxed(rbase + GICR_WAKER); |
| if (enable) |
| /* Wake up this CPU redistributor */ |
| val &= ~GICR_WAKER_ProcessorSleep; |
| else |
| val |= GICR_WAKER_ProcessorSleep; |
| writel_relaxed(val, rbase + GICR_WAKER); |
| |
| if (!enable) { /* Check that GICR_WAKER is writeable */ |
| val = readl_relaxed(rbase + GICR_WAKER); |
| if (!(val & GICR_WAKER_ProcessorSleep)) |
| return; /* No PM support in this redistributor */ |
| } |
| |
| while (--count) { |
| val = readl_relaxed(rbase + GICR_WAKER); |
| if (enable ^ (bool)(val & GICR_WAKER_ChildrenAsleep)) |
| break; |
| cpu_relax(); |
| udelay(1); |
| } |
| if (!count) |
| pr_err_ratelimited("redistributor failed to %s...\n", |
| enable ? "wakeup" : "sleep"); |
| } |
| |
| /* |
| * Routines to disable, enable, EOI and route interrupts |
| */ |
| static u32 convert_offset_index(struct irq_data *d, u32 offset, u32 *index) |
| { |
| switch (get_intid_range(d)) { |
| case SGI_RANGE: |
| case PPI_RANGE: |
| case SPI_RANGE: |
| *index = d->hwirq; |
| return offset; |
| case EPPI_RANGE: |
| /* |
| * Contrary to the ESPI range, the EPPI range is contiguous |
| * to the PPI range in the registers, so let's adjust the |
| * displacement accordingly. Consistency is overrated. |
| */ |
| *index = d->hwirq - EPPI_BASE_INTID + 32; |
| return offset; |
| case ESPI_RANGE: |
| *index = d->hwirq - ESPI_BASE_INTID; |
| switch (offset) { |
| case GICD_ISENABLER: |
| return GICD_ISENABLERnE; |
| case GICD_ICENABLER: |
| return GICD_ICENABLERnE; |
| case GICD_ISPENDR: |
| return GICD_ISPENDRnE; |
| case GICD_ICPENDR: |
| return GICD_ICPENDRnE; |
| case GICD_ISACTIVER: |
| return GICD_ISACTIVERnE; |
| case GICD_ICACTIVER: |
| return GICD_ICACTIVERnE; |
| case GICD_IPRIORITYR: |
| return GICD_IPRIORITYRnE; |
| case GICD_ICFGR: |
| return GICD_ICFGRnE; |
| case GICD_IROUTER: |
| return GICD_IROUTERnE; |
| default: |
| break; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| WARN_ON(1); |
| *index = d->hwirq; |
| return offset; |
| } |
| |
| static int gic_peek_irq(struct irq_data *d, u32 offset) |
| { |
| void __iomem *base; |
| u32 index, mask; |
| |
| offset = convert_offset_index(d, offset, &index); |
| mask = 1 << (index % 32); |
| |
| if (gic_irq_in_rdist(d)) |
| base = gic_data_rdist_sgi_base(); |
| else |
| base = gic_data.dist_base; |
| |
| return !!(readl_relaxed(base + offset + (index / 32) * 4) & mask); |
| } |
| |
| static void gic_poke_irq(struct irq_data *d, u32 offset) |
| { |
| void (*rwp_wait)(void); |
| void __iomem *base; |
| u32 index, mask; |
| |
| offset = convert_offset_index(d, offset, &index); |
| mask = 1 << (index % 32); |
| |
| if (gic_irq_in_rdist(d)) { |
| base = gic_data_rdist_sgi_base(); |
| rwp_wait = gic_redist_wait_for_rwp; |
| } else { |
| base = gic_data.dist_base; |
| rwp_wait = gic_dist_wait_for_rwp; |
| } |
| |
| writel_relaxed(mask, base + offset + (index / 32) * 4); |
| rwp_wait(); |
| } |
| |
| static void gic_mask_irq(struct irq_data *d) |
| { |
| gic_poke_irq(d, GICD_ICENABLER); |
| } |
| |
| static void gic_eoimode1_mask_irq(struct irq_data *d) |
| { |
| gic_mask_irq(d); |
| /* |
| * When masking a forwarded interrupt, make sure it is |
| * deactivated as well. |
| * |
| * This ensures that an interrupt that is getting |
| * disabled/masked will not get "stuck", because there is |
| * noone to deactivate it (guest is being terminated). |
| */ |
| if (irqd_is_forwarded_to_vcpu(d)) |
| gic_poke_irq(d, GICD_ICACTIVER); |
| } |
| |
| static void gic_unmask_irq(struct irq_data *d) |
| { |
| gic_poke_irq(d, GICD_ISENABLER); |
| } |
| |
| static inline bool gic_supports_nmi(void) |
| { |
| return IS_ENABLED(CONFIG_ARM64_PSEUDO_NMI) && |
| static_branch_likely(&supports_pseudo_nmis); |
| } |
| |
| static int gic_irq_set_irqchip_state(struct irq_data *d, |
| enum irqchip_irq_state which, bool val) |
| { |
| u32 reg; |
| |
| if (d->hwirq >= 8192) /* SGI/PPI/SPI only */ |
| return -EINVAL; |
| |
| switch (which) { |
| case IRQCHIP_STATE_PENDING: |
| reg = val ? GICD_ISPENDR : GICD_ICPENDR; |
| break; |
| |
| case IRQCHIP_STATE_ACTIVE: |
| reg = val ? GICD_ISACTIVER : GICD_ICACTIVER; |
| break; |
| |
| case IRQCHIP_STATE_MASKED: |
| reg = val ? GICD_ICENABLER : GICD_ISENABLER; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| gic_poke_irq(d, reg); |
| return 0; |
| } |
| |
| static int gic_irq_get_irqchip_state(struct irq_data *d, |
| enum irqchip_irq_state which, bool *val) |
| { |
| if (d->hwirq >= 8192) /* PPI/SPI only */ |
| return -EINVAL; |
| |
| switch (which) { |
| case IRQCHIP_STATE_PENDING: |
| *val = gic_peek_irq(d, GICD_ISPENDR); |
| break; |
| |
| case IRQCHIP_STATE_ACTIVE: |
| *val = gic_peek_irq(d, GICD_ISACTIVER); |
| break; |
| |
| case IRQCHIP_STATE_MASKED: |
| *val = !gic_peek_irq(d, GICD_ISENABLER); |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static void gic_irq_set_prio(struct irq_data *d, u8 prio) |
| { |
| void __iomem *base = gic_dist_base(d); |
| u32 offset, index; |
| |
| offset = convert_offset_index(d, GICD_IPRIORITYR, &index); |
| |
| writeb_relaxed(prio, base + offset + index); |
| } |
| |
| static u32 __gic_get_ppi_index(irq_hw_number_t hwirq) |
| { |
| switch (__get_intid_range(hwirq)) { |
| case PPI_RANGE: |
| return hwirq - 16; |
| case EPPI_RANGE: |
| return hwirq - EPPI_BASE_INTID + 16; |
| default: |
| unreachable(); |
| } |
| } |
| |
| static u32 gic_get_ppi_index(struct irq_data *d) |
| { |
| return __gic_get_ppi_index(d->hwirq); |
| } |
| |
| static int gic_irq_nmi_setup(struct irq_data *d) |
| { |
| struct irq_desc *desc = irq_to_desc(d->irq); |
| |
| if (!gic_supports_nmi()) |
| return -EINVAL; |
| |
| if (gic_peek_irq(d, GICD_ISENABLER)) { |
| pr_err("Cannot set NMI property of enabled IRQ %u\n", d->irq); |
| return -EINVAL; |
| } |
| |
| /* |
| * A secondary irq_chip should be in charge of LPI request, |
| * it should not be possible to get there |
| */ |
| if (WARN_ON(gic_irq(d) >= 8192)) |
| return -EINVAL; |
| |
| /* desc lock should already be held */ |
| if (gic_irq_in_rdist(d)) { |
| u32 idx = gic_get_ppi_index(d); |
| |
| /* Setting up PPI as NMI, only switch handler for first NMI */ |
| if (!refcount_inc_not_zero(&ppi_nmi_refs[idx])) { |
| refcount_set(&ppi_nmi_refs[idx], 1); |
| desc->handle_irq = handle_percpu_devid_fasteoi_nmi; |
| } |
| } else { |
| desc->handle_irq = handle_fasteoi_nmi; |
| } |
| |
| gic_irq_set_prio(d, GICD_INT_NMI_PRI); |
| |
| return 0; |
| } |
| |
| static void gic_irq_nmi_teardown(struct irq_data *d) |
| { |
| struct irq_desc *desc = irq_to_desc(d->irq); |
| |
| if (WARN_ON(!gic_supports_nmi())) |
| return; |
| |
| if (gic_peek_irq(d, GICD_ISENABLER)) { |
| pr_err("Cannot set NMI property of enabled IRQ %u\n", d->irq); |
| return; |
| } |
| |
| /* |
| * A secondary irq_chip should be in charge of LPI request, |
| * it should not be possible to get there |
| */ |
| if (WARN_ON(gic_irq(d) >= 8192)) |
| return; |
| |
| /* desc lock should already be held */ |
| if (gic_irq_in_rdist(d)) { |
| u32 idx = gic_get_ppi_index(d); |
| |
| /* Tearing down NMI, only switch handler for last NMI */ |
| if (refcount_dec_and_test(&ppi_nmi_refs[idx])) |
| desc->handle_irq = handle_percpu_devid_irq; |
| } else { |
| desc->handle_irq = handle_fasteoi_irq; |
| } |
| |
| gic_irq_set_prio(d, GICD_INT_DEF_PRI); |
| } |
| |
| static void gic_eoi_irq(struct irq_data *d) |
| { |
| write_gicreg(gic_irq(d), ICC_EOIR1_EL1); |
| isb(); |
| } |
| |
| static void gic_eoimode1_eoi_irq(struct irq_data *d) |
| { |
| /* |
| * No need to deactivate an LPI, or an interrupt that |
| * is is getting forwarded to a vcpu. |
| */ |
| if (gic_irq(d) >= 8192 || irqd_is_forwarded_to_vcpu(d)) |
| return; |
| gic_write_dir(gic_irq(d)); |
| } |
| |
| static int gic_set_type(struct irq_data *d, unsigned int type) |
| { |
| enum gic_intid_range range; |
| unsigned int irq = gic_irq(d); |
| void (*rwp_wait)(void); |
| void __iomem *base; |
| u32 offset, index; |
| int ret; |
| |
| range = get_intid_range(d); |
| |
| /* Interrupt configuration for SGIs can't be changed */ |
| if (range == SGI_RANGE) |
| return type != IRQ_TYPE_EDGE_RISING ? -EINVAL : 0; |
| |
| /* SPIs have restrictions on the supported types */ |
| if ((range == SPI_RANGE || range == ESPI_RANGE) && |
| type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING) |
| return -EINVAL; |
| |
| if (gic_irq_in_rdist(d)) { |
| base = gic_data_rdist_sgi_base(); |
| rwp_wait = gic_redist_wait_for_rwp; |
| } else { |
| base = gic_data.dist_base; |
| rwp_wait = gic_dist_wait_for_rwp; |
| } |
| |
| offset = convert_offset_index(d, GICD_ICFGR, &index); |
| |
| ret = gic_configure_irq(index, type, base + offset, rwp_wait); |
| if (ret && (range == PPI_RANGE || range == EPPI_RANGE)) { |
| /* Misconfigured PPIs are usually not fatal */ |
| pr_warn("GIC: PPI INTID%d is secure or misconfigured\n", irq); |
| ret = 0; |
| } |
| |
| return ret; |
| } |
| |
| static int gic_irq_set_vcpu_affinity(struct irq_data *d, void *vcpu) |
| { |
| if (get_intid_range(d) == SGI_RANGE) |
| return -EINVAL; |
| |
| if (vcpu) |
| irqd_set_forwarded_to_vcpu(d); |
| else |
| irqd_clr_forwarded_to_vcpu(d); |
| return 0; |
| } |
| |
| static u64 gic_mpidr_to_affinity(unsigned long mpidr) |
| { |
| u64 aff; |
| |
| aff = ((u64)MPIDR_AFFINITY_LEVEL(mpidr, 3) << 32 | |
| MPIDR_AFFINITY_LEVEL(mpidr, 2) << 16 | |
| MPIDR_AFFINITY_LEVEL(mpidr, 1) << 8 | |
| MPIDR_AFFINITY_LEVEL(mpidr, 0)); |
| |
| return aff; |
| } |
| |
| static void gic_deactivate_unhandled(u32 irqnr) |
| { |
| if (static_branch_likely(&supports_deactivate_key)) { |
| if (irqnr < 8192) |
| gic_write_dir(irqnr); |
| } else { |
| write_gicreg(irqnr, ICC_EOIR1_EL1); |
| isb(); |
| } |
| } |
| |
| /* |
| * Follow a read of the IAR with any HW maintenance that needs to happen prior |
| * to invoking the relevant IRQ handler. We must do two things: |
| * |
| * (1) Ensure instruction ordering between a read of IAR and subsequent |
| * instructions in the IRQ handler using an ISB. |
| * |
| * It is possible for the IAR to report an IRQ which was signalled *after* |
| * the CPU took an IRQ exception as multiple interrupts can race to be |
| * recognized by the GIC, earlier interrupts could be withdrawn, and/or |
| * later interrupts could be prioritized by the GIC. |
| * |
| * For devices which are tightly coupled to the CPU, such as PMUs, a |
| * context synchronization event is necessary to ensure that system |
| * register state is not stale, as these may have been indirectly written |
| * *after* exception entry. |
| * |
| * (2) Deactivate the interrupt when EOI mode 1 is in use. |
| */ |
| static inline void gic_complete_ack(u32 irqnr) |
| { |
| if (static_branch_likely(&supports_deactivate_key)) |
| write_gicreg(irqnr, ICC_EOIR1_EL1); |
| |
| isb(); |
| } |
| |
| static inline void gic_handle_nmi(u32 irqnr, struct pt_regs *regs) |
| { |
| bool irqs_enabled = interrupts_enabled(regs); |
| int err; |
| |
| if (irqs_enabled) |
| nmi_enter(); |
| |
| gic_complete_ack(irqnr); |
| |
| /* |
| * Leave the PSR.I bit set to prevent other NMIs to be |
| * received while handling this one. |
| * PSR.I will be restored when we ERET to the |
| * interrupted context. |
| */ |
| err = handle_domain_nmi(gic_data.domain, irqnr, regs); |
| if (err) |
| gic_deactivate_unhandled(irqnr); |
| |
| if (irqs_enabled) |
| nmi_exit(); |
| } |
| |
| static u32 do_read_iar(struct pt_regs *regs) |
| { |
| u32 iar; |
| |
| if (gic_supports_nmi() && unlikely(!interrupts_enabled(regs))) { |
| u64 pmr; |
| |
| /* |
| * We were in a context with IRQs disabled. However, the |
| * entry code has set PMR to a value that allows any |
| * interrupt to be acknowledged, and not just NMIs. This can |
| * lead to surprising effects if the NMI has been retired in |
| * the meantime, and that there is an IRQ pending. The IRQ |
| * would then be taken in NMI context, something that nobody |
| * wants to debug twice. |
| * |
| * Until we sort this, drop PMR again to a level that will |
| * actually only allow NMIs before reading IAR, and then |
| * restore it to what it was. |
| */ |
| pmr = gic_read_pmr(); |
| gic_pmr_mask_irqs(); |
| isb(); |
| |
| iar = gic_read_iar(); |
| |
| gic_write_pmr(pmr); |
| } else { |
| iar = gic_read_iar(); |
| } |
| |
| return iar; |
| } |
| |
| static asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs) |
| { |
| u32 irqnr; |
| |
| irqnr = do_read_iar(regs); |
| |
| /* Check for special IDs first */ |
| if ((irqnr >= 1020 && irqnr <= 1023)) |
| return; |
| |
| if (gic_supports_nmi() && |
| unlikely(gic_read_rpr() == GICD_INT_RPR_PRI(GICD_INT_NMI_PRI))) { |
| gic_handle_nmi(irqnr, regs); |
| return; |
| } |
| |
| if (gic_prio_masking_enabled()) { |
| gic_pmr_mask_irqs(); |
| gic_arch_enable_irqs(); |
| } |
| |
| gic_complete_ack(irqnr); |
| |
| if (handle_domain_irq(gic_data.domain, irqnr, regs)) { |
| WARN_ONCE(true, "Unexpected interrupt received!\n"); |
| log_abnormal_wakeup_reason("unexpected HW IRQ %u", irqnr); |
| gic_deactivate_unhandled(irqnr); |
| } |
| } |
| |
| static u32 gic_get_pribits(void) |
| { |
| u32 pribits; |
| |
| pribits = gic_read_ctlr(); |
| pribits &= ICC_CTLR_EL1_PRI_BITS_MASK; |
| pribits >>= ICC_CTLR_EL1_PRI_BITS_SHIFT; |
| pribits++; |
| |
| return pribits; |
| } |
| |
| static bool gic_has_group0(void) |
| { |
| u32 val; |
| u32 old_pmr; |
| |
| old_pmr = gic_read_pmr(); |
| |
| /* |
| * Let's find out if Group0 is under control of EL3 or not by |
| * setting the highest possible, non-zero priority in PMR. |
| * |
| * If SCR_EL3.FIQ is set, the priority gets shifted down in |
| * order for the CPU interface to set bit 7, and keep the |
| * actual priority in the non-secure range. In the process, it |
| * looses the least significant bit and the actual priority |
| * becomes 0x80. Reading it back returns 0, indicating that |
| * we're don't have access to Group0. |
| */ |
| gic_write_pmr(BIT(8 - gic_get_pribits())); |
| val = gic_read_pmr(); |
| |
| gic_write_pmr(old_pmr); |
| |
| return val != 0; |
| } |
| |
| static void __init gic_dist_init(void) |
| { |
| unsigned int i; |
| u64 affinity; |
| void __iomem *base = gic_data.dist_base; |
| u32 val; |
| |
| /* Disable the distributor */ |
| writel_relaxed(0, base + GICD_CTLR); |
| gic_dist_wait_for_rwp(); |
| |
| /* |
| * Configure SPIs as non-secure Group-1. This will only matter |
| * if the GIC only has a single security state. This will not |
| * do the right thing if the kernel is running in secure mode, |
| * but that's not the intended use case anyway. |
| */ |
| for (i = 32; i < GIC_LINE_NR; i += 32) |
| writel_relaxed(~0, base + GICD_IGROUPR + i / 8); |
| |
| /* Extended SPI range, not handled by the GICv2/GICv3 common code */ |
| for (i = 0; i < GIC_ESPI_NR; i += 32) { |
| writel_relaxed(~0U, base + GICD_ICENABLERnE + i / 8); |
| writel_relaxed(~0U, base + GICD_ICACTIVERnE + i / 8); |
| } |
| |
| for (i = 0; i < GIC_ESPI_NR; i += 32) |
| writel_relaxed(~0U, base + GICD_IGROUPRnE + i / 8); |
| |
| for (i = 0; i < GIC_ESPI_NR; i += 16) |
| writel_relaxed(0, base + GICD_ICFGRnE + i / 4); |
| |
| for (i = 0; i < GIC_ESPI_NR; i += 4) |
| writel_relaxed(GICD_INT_DEF_PRI_X4, base + GICD_IPRIORITYRnE + i); |
| |
| /* Now do the common stuff, and wait for the distributor to drain */ |
| gic_dist_config(base, GIC_LINE_NR, gic_dist_wait_for_rwp); |
| |
| val = GICD_CTLR_ARE_NS | GICD_CTLR_ENABLE_G1A | GICD_CTLR_ENABLE_G1; |
| if (gic_data.rdists.gicd_typer2 & GICD_TYPER2_nASSGIcap) { |
| pr_info("Enabling SGIs without active state\n"); |
| val |= GICD_CTLR_nASSGIreq; |
| } |
| |
| /* Enable distributor with ARE, Group1 */ |
| writel_relaxed(val, base + GICD_CTLR); |
| |
| /* |
| * Set all global interrupts to the boot CPU only. ARE must be |
| * enabled. |
| */ |
| affinity = gic_mpidr_to_affinity(cpu_logical_map(smp_processor_id())); |
| for (i = 32; i < GIC_LINE_NR; i++) |
| gic_write_irouter(affinity, base + GICD_IROUTER + i * 8); |
| |
| for (i = 0; i < GIC_ESPI_NR; i++) |
| gic_write_irouter(affinity, base + GICD_IROUTERnE + i * 8); |
| } |
| |
| static int gic_iterate_rdists(int (*fn)(struct redist_region *, void __iomem *)) |
| { |
| int ret = -ENODEV; |
| int i; |
| |
| for (i = 0; i < gic_data.nr_redist_regions; i++) { |
| void __iomem *ptr = gic_data.redist_regions[i].redist_base; |
| u64 typer; |
| u32 reg; |
| |
| reg = readl_relaxed(ptr + GICR_PIDR2) & GIC_PIDR2_ARCH_MASK; |
| if (reg != GIC_PIDR2_ARCH_GICv3 && |
| reg != GIC_PIDR2_ARCH_GICv4) { /* We're in trouble... */ |
| pr_warn("No redistributor present @%p\n", ptr); |
| break; |
| } |
| |
| do { |
| typer = gic_read_typer(ptr + GICR_TYPER); |
| ret = fn(gic_data.redist_regions + i, ptr); |
| if (!ret) |
| return 0; |
| |
| if (gic_data.redist_regions[i].single_redist) |
| break; |
| |
| if (gic_data.redist_stride) { |
| ptr += gic_data.redist_stride; |
| } else { |
| ptr += SZ_64K * 2; /* Skip RD_base + SGI_base */ |
| if (typer & GICR_TYPER_VLPIS) |
| ptr += SZ_64K * 2; /* Skip VLPI_base + reserved page */ |
| } |
| } while (!(typer & GICR_TYPER_LAST)); |
| } |
| |
| return ret ? -ENODEV : 0; |
| } |
| |
| static int __gic_populate_rdist(struct redist_region *region, void __iomem *ptr) |
| { |
| unsigned long mpidr = cpu_logical_map(smp_processor_id()); |
| u64 typer; |
| u32 aff; |
| |
| /* |
| * Convert affinity to a 32bit value that can be matched to |
| * GICR_TYPER bits [63:32]. |
| */ |
| aff = (MPIDR_AFFINITY_LEVEL(mpidr, 3) << 24 | |
| MPIDR_AFFINITY_LEVEL(mpidr, 2) << 16 | |
| MPIDR_AFFINITY_LEVEL(mpidr, 1) << 8 | |
| MPIDR_AFFINITY_LEVEL(mpidr, 0)); |
| |
| typer = gic_read_typer(ptr + GICR_TYPER); |
| if ((typer >> 32) == aff) { |
| u64 offset = ptr - region->redist_base; |
| raw_spin_lock_init(&gic_data_rdist()->rd_lock); |
| gic_data_rdist_rd_base() = ptr; |
| gic_data_rdist()->phys_base = region->phys_base + offset; |
| |
| pr_info("CPU%d: found redistributor %lx region %d:%pa\n", |
| smp_processor_id(), mpidr, |
| (int)(region - gic_data.redist_regions), |
| &gic_data_rdist()->phys_base); |
| return 0; |
| } |
| |
| /* Try next one */ |
| return 1; |
| } |
| |
| static int gic_populate_rdist(void) |
| { |
| if (gic_iterate_rdists(__gic_populate_rdist) == 0) |
| return 0; |
| |
| /* We couldn't even deal with ourselves... */ |
| WARN(true, "CPU%d: mpidr %lx has no re-distributor!\n", |
| smp_processor_id(), |
| (unsigned long)cpu_logical_map(smp_processor_id())); |
| return -ENODEV; |
| } |
| |
| static int __gic_update_rdist_properties(struct redist_region *region, |
| void __iomem *ptr) |
| { |
| u64 typer = gic_read_typer(ptr + GICR_TYPER); |
| |
| /* Boot-time cleanip */ |
| if ((typer & GICR_TYPER_VLPIS) && (typer & GICR_TYPER_RVPEID)) { |
| u64 val; |
| |
| /* Deactivate any present vPE */ |
| val = gicr_read_vpendbaser(ptr + SZ_128K + GICR_VPENDBASER); |
| if (val & GICR_VPENDBASER_Valid) |
| gicr_write_vpendbaser(GICR_VPENDBASER_PendingLast, |
| ptr + SZ_128K + GICR_VPENDBASER); |
| |
| /* Mark the VPE table as invalid */ |
| val = gicr_read_vpropbaser(ptr + SZ_128K + GICR_VPROPBASER); |
| val &= ~GICR_VPROPBASER_4_1_VALID; |
| gicr_write_vpropbaser(val, ptr + SZ_128K + GICR_VPROPBASER); |
| } |
| |
| gic_data.rdists.has_vlpis &= !!(typer & GICR_TYPER_VLPIS); |
| |
| /* RVPEID implies some form of DirectLPI, no matter what the doc says... :-/ */ |
| gic_data.rdists.has_rvpeid &= !!(typer & GICR_TYPER_RVPEID); |
| gic_data.rdists.has_direct_lpi &= (!!(typer & GICR_TYPER_DirectLPIS) | |
| gic_data.rdists.has_rvpeid); |
| gic_data.rdists.has_vpend_valid_dirty &= !!(typer & GICR_TYPER_DIRTY); |
| |
| /* Detect non-sensical configurations */ |
| if (WARN_ON_ONCE(gic_data.rdists.has_rvpeid && !gic_data.rdists.has_vlpis)) { |
| gic_data.rdists.has_direct_lpi = false; |
| gic_data.rdists.has_vlpis = false; |
| gic_data.rdists.has_rvpeid = false; |
| } |
| |
| gic_data.ppi_nr = min(GICR_TYPER_NR_PPIS(typer), gic_data.ppi_nr); |
| |
| return 1; |
| } |
| |
| static void gic_update_rdist_properties(void) |
| { |
| gic_data.ppi_nr = UINT_MAX; |
| gic_iterate_rdists(__gic_update_rdist_properties); |
| if (WARN_ON(gic_data.ppi_nr == UINT_MAX)) |
| gic_data.ppi_nr = 0; |
| pr_info("%d PPIs implemented\n", gic_data.ppi_nr); |
| if (gic_data.rdists.has_vlpis) |
| pr_info("GICv4 features: %s%s%s\n", |
| gic_data.rdists.has_direct_lpi ? "DirectLPI " : "", |
| gic_data.rdists.has_rvpeid ? "RVPEID " : "", |
| gic_data.rdists.has_vpend_valid_dirty ? "Valid+Dirty " : ""); |
| } |
| |
| /* Check whether it's single security state view */ |
| static inline bool gic_dist_security_disabled(void) |
| { |
| return readl_relaxed(gic_data.dist_base + GICD_CTLR) & GICD_CTLR_DS; |
| } |
| |
| static void gic_cpu_sys_reg_init(void) |
| { |
| int i, cpu = smp_processor_id(); |
| u64 mpidr = cpu_logical_map(cpu); |
| u64 need_rss = MPIDR_RS(mpidr); |
| bool group0; |
| u32 pribits; |
| |
| /* |
| * Need to check that the SRE bit has actually been set. If |
| * not, it means that SRE is disabled at EL2. We're going to |
| * die painfully, and there is nothing we can do about it. |
| * |
| * Kindly inform the luser. |
| */ |
| if (!gic_enable_sre()) |
| pr_err("GIC: unable to set SRE (disabled at EL2), panic ahead\n"); |
| |
| pribits = gic_get_pribits(); |
| |
| group0 = gic_has_group0(); |
| |
| /* Set priority mask register */ |
| if (!gic_prio_masking_enabled()) { |
| write_gicreg(DEFAULT_PMR_VALUE, ICC_PMR_EL1); |
| } else if (gic_supports_nmi()) { |
| /* |
| * Mismatch configuration with boot CPU, the system is likely |
| * to die as interrupt masking will not work properly on all |
| * CPUs |
| * |
| * The boot CPU calls this function before enabling NMI support, |
| * and as a result we'll never see this warning in the boot path |
| * for that CPU. |
| */ |
| if (static_branch_unlikely(&gic_nonsecure_priorities)) |
| WARN_ON(!group0 || gic_dist_security_disabled()); |
| else |
| WARN_ON(group0 && !gic_dist_security_disabled()); |
| } |
| |
| /* |
| * Some firmwares hand over to the kernel with the BPR changed from |
| * its reset value (and with a value large enough to prevent |
| * any pre-emptive interrupts from working at all). Writing a zero |
| * to BPR restores is reset value. |
| */ |
| gic_write_bpr1(0); |
| |
| if (static_branch_likely(&supports_deactivate_key)) { |
| /* EOI drops priority only (mode 1) */ |
| gic_write_ctlr(ICC_CTLR_EL1_EOImode_drop); |
| } else { |
| /* EOI deactivates interrupt too (mode 0) */ |
| gic_write_ctlr(ICC_CTLR_EL1_EOImode_drop_dir); |
| } |
| |
| /* Always whack Group0 before Group1 */ |
| if (group0) { |
| switch(pribits) { |
| case 8: |
| case 7: |
| write_gicreg(0, ICC_AP0R3_EL1); |
| write_gicreg(0, ICC_AP0R2_EL1); |
| fallthrough; |
| case 6: |
| write_gicreg(0, ICC_AP0R1_EL1); |
| fallthrough; |
| case 5: |
| case 4: |
| write_gicreg(0, ICC_AP0R0_EL1); |
| } |
| |
| isb(); |
| } |
| |
| switch(pribits) { |
| case 8: |
| case 7: |
| write_gicreg(0, ICC_AP1R3_EL1); |
| write_gicreg(0, ICC_AP1R2_EL1); |
| fallthrough; |
| case 6: |
| write_gicreg(0, ICC_AP1R1_EL1); |
| fallthrough; |
| case 5: |
| case 4: |
| write_gicreg(0, ICC_AP1R0_EL1); |
| } |
| |
| isb(); |
| |
| /* ... and let's hit the road... */ |
| gic_write_grpen1(1); |
| |
| /* Keep the RSS capability status in per_cpu variable */ |
| per_cpu(has_rss, cpu) = !!(gic_read_ctlr() & ICC_CTLR_EL1_RSS); |
| |
| /* Check all the CPUs have capable of sending SGIs to other CPUs */ |
| for_each_online_cpu(i) { |
| bool have_rss = per_cpu(has_rss, i) && per_cpu(has_rss, cpu); |
| |
| need_rss |= MPIDR_RS(cpu_logical_map(i)); |
| if (need_rss && (!have_rss)) |
| pr_crit("CPU%d (%lx) can't SGI CPU%d (%lx), no RSS\n", |
| cpu, (unsigned long)mpidr, |
| i, (unsigned long)cpu_logical_map(i)); |
| } |
| |
| /** |
| * GIC spec says, when ICC_CTLR_EL1.RSS==1 and GICD_TYPER.RSS==0, |
| * writing ICC_ASGI1R_EL1 register with RS != 0 is a CONSTRAINED |
| * UNPREDICTABLE choice of : |
| * - The write is ignored. |
| * - The RS field is treated as 0. |
| */ |
| if (need_rss && (!gic_data.has_rss)) |
| pr_crit_once("RSS is required but GICD doesn't support it\n"); |
| } |
| |
| static bool gicv3_nolpi; |
| |
| static int __init gicv3_nolpi_cfg(char *buf) |
| { |
| return strtobool(buf, &gicv3_nolpi); |
| } |
| early_param("irqchip.gicv3_nolpi", gicv3_nolpi_cfg); |
| |
| static int gic_dist_supports_lpis(void) |
| { |
| return (IS_ENABLED(CONFIG_ARM_GIC_V3_ITS) && |
| !!(readl_relaxed(gic_data.dist_base + GICD_TYPER) & GICD_TYPER_LPIS) && |
| !gicv3_nolpi); |
| } |
| |
| static void gic_cpu_init(void) |
| { |
| void __iomem *rbase; |
| int i; |
| |
| /* Register ourselves with the rest of the world */ |
| if (gic_populate_rdist()) |
| return; |
| |
| gic_enable_redist(true); |
| |
| WARN((gic_data.ppi_nr > 16 || GIC_ESPI_NR != 0) && |
| !(gic_read_ctlr() & ICC_CTLR_EL1_ExtRange), |
| "Distributor has extended ranges, but CPU%d doesn't\n", |
| smp_processor_id()); |
| |
| rbase = gic_data_rdist_sgi_base(); |
| |
| /* Configure SGIs/PPIs as non-secure Group-1 */ |
| for (i = 0; i < gic_data.ppi_nr + 16; i += 32) |
| writel_relaxed(~0, rbase + GICR_IGROUPR0 + i / 8); |
| |
| gic_cpu_config(rbase, gic_data.ppi_nr + 16, gic_redist_wait_for_rwp); |
| |
| /* initialise system registers */ |
| gic_cpu_sys_reg_init(); |
| } |
| |
| #ifdef CONFIG_SMP |
| |
| #define MPIDR_TO_SGI_RS(mpidr) (MPIDR_RS(mpidr) << ICC_SGI1R_RS_SHIFT) |
| #define MPIDR_TO_SGI_CLUSTER_ID(mpidr) ((mpidr) & ~0xFUL) |
| |
| static int gic_starting_cpu(unsigned int cpu) |
| { |
| gic_cpu_init(); |
| |
| if (gic_dist_supports_lpis()) |
| its_cpu_init(); |
| |
| return 0; |
| } |
| |
| static u16 gic_compute_target_list(int *base_cpu, const struct cpumask *mask, |
| unsigned long cluster_id) |
| { |
| int next_cpu, cpu = *base_cpu; |
| unsigned long mpidr = cpu_logical_map(cpu); |
| u16 tlist = 0; |
| |
| while (cpu < nr_cpu_ids) { |
| tlist |= 1 << (mpidr & 0xf); |
| |
| next_cpu = cpumask_next(cpu, mask); |
| if (next_cpu >= nr_cpu_ids) |
| goto out; |
| cpu = next_cpu; |
| |
| mpidr = cpu_logical_map(cpu); |
| |
| if (cluster_id != MPIDR_TO_SGI_CLUSTER_ID(mpidr)) { |
| cpu--; |
| goto out; |
| } |
| } |
| out: |
| *base_cpu = cpu; |
| return tlist; |
| } |
| |
| #define MPIDR_TO_SGI_AFFINITY(cluster_id, level) \ |
| (MPIDR_AFFINITY_LEVEL(cluster_id, level) \ |
| << ICC_SGI1R_AFFINITY_## level ##_SHIFT) |
| |
| static void gic_send_sgi(u64 cluster_id, u16 tlist, unsigned int irq) |
| { |
| u64 val; |
| |
| val = (MPIDR_TO_SGI_AFFINITY(cluster_id, 3) | |
| MPIDR_TO_SGI_AFFINITY(cluster_id, 2) | |
| irq << ICC_SGI1R_SGI_ID_SHIFT | |
| MPIDR_TO_SGI_AFFINITY(cluster_id, 1) | |
| MPIDR_TO_SGI_RS(cluster_id) | |
| tlist << ICC_SGI1R_TARGET_LIST_SHIFT); |
| |
| pr_devel("CPU%d: ICC_SGI1R_EL1 %llx\n", smp_processor_id(), val); |
| gic_write_sgi1r(val); |
| } |
| |
| static void gic_ipi_send_mask(struct irq_data *d, const struct cpumask *mask) |
| { |
| int cpu; |
| |
| if (WARN_ON(d->hwirq >= 16)) |
| return; |
| |
| /* |
| * Ensure that stores to Normal memory are visible to the |
| * other CPUs before issuing the IPI. |
| */ |
| wmb(); |
| |
| for_each_cpu(cpu, mask) { |
| u64 cluster_id = MPIDR_TO_SGI_CLUSTER_ID(cpu_logical_map(cpu)); |
| u16 tlist; |
| |
| tlist = gic_compute_target_list(&cpu, mask, cluster_id); |
| gic_send_sgi(cluster_id, tlist, d->hwirq); |
| } |
| |
| /* Force the above writes to ICC_SGI1R_EL1 to be executed */ |
| isb(); |
| } |
| |
| static void __init gic_smp_init(void) |
| { |
| struct irq_fwspec sgi_fwspec = { |
| .fwnode = gic_data.fwnode, |
| .param_count = 1, |
| }; |
| int base_sgi; |
| |
| cpuhp_setup_state_nocalls(CPUHP_AP_IRQ_GIC_STARTING, |
| "irqchip/arm/gicv3:starting", |
| gic_starting_cpu, NULL); |
| |
| /* Register all 8 non-secure SGIs */ |
| base_sgi = __irq_domain_alloc_irqs(gic_data.domain, -1, 8, |
| NUMA_NO_NODE, &sgi_fwspec, |
| false, NULL); |
| if (WARN_ON(base_sgi <= 0)) |
| return; |
| |
| set_smp_ipi_range(base_sgi, 8); |
| } |
| |
| static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, |
| bool force) |
| { |
| unsigned int cpu; |
| u32 offset, index; |
| void __iomem *reg; |
| int enabled; |
| u64 val; |
| |
| if (force) |
| cpu = cpumask_first(mask_val); |
| else |
| cpu = cpumask_any_and(mask_val, cpu_online_mask); |
| |
| if (cpu >= nr_cpu_ids) |
| return -EINVAL; |
| |
| if (gic_irq_in_rdist(d)) |
| return -EINVAL; |
| |
| /* If interrupt was enabled, disable it first */ |
| enabled = gic_peek_irq(d, GICD_ISENABLER); |
| if (enabled) |
| gic_mask_irq(d); |
| |
| offset = convert_offset_index(d, GICD_IROUTER, &index); |
| reg = gic_dist_base(d) + offset + (index * 8); |
| val = gic_mpidr_to_affinity(cpu_logical_map(cpu)); |
| |
| gic_write_irouter(val, reg); |
| |
| /* |
| * If the interrupt was enabled, enabled it again. Otherwise, |
| * just wait for the distributor to have digested our changes. |
| */ |
| if (enabled) |
| gic_unmask_irq(d); |
| else |
| gic_dist_wait_for_rwp(); |
| |
| irq_data_update_effective_affinity(d, cpumask_of(cpu)); |
| |
| return IRQ_SET_MASK_OK_DONE; |
| } |
| #else |
| #define gic_set_affinity NULL |
| #define gic_ipi_send_mask NULL |
| #define gic_smp_init() do { } while(0) |
| #endif |
| |
| static int gic_retrigger(struct irq_data *data) |
| { |
| return !gic_irq_set_irqchip_state(data, IRQCHIP_STATE_PENDING, true); |
| } |
| |
| #ifdef CONFIG_CPU_PM |
| static int gic_cpu_pm_notifier(struct notifier_block *self, |
| unsigned long cmd, void *v) |
| { |
| if (cmd == CPU_PM_EXIT) { |
| if (gic_dist_security_disabled()) |
| gic_enable_redist(true); |
| gic_cpu_sys_reg_init(); |
| } else if (cmd == CPU_PM_ENTER && gic_dist_security_disabled()) { |
| gic_write_grpen1(0); |
| gic_enable_redist(false); |
| } |
| return NOTIFY_OK; |
| } |
| |
| static struct notifier_block gic_cpu_pm_notifier_block = { |
| .notifier_call = gic_cpu_pm_notifier, |
| }; |
| |
| static void gic_cpu_pm_init(void) |
| { |
| cpu_pm_register_notifier(&gic_cpu_pm_notifier_block); |
| } |
| |
| #else |
| static inline void gic_cpu_pm_init(void) { } |
| #endif /* CONFIG_CPU_PM */ |
| |
| static struct irq_chip gic_chip = { |
| .name = "GICv3", |
| .irq_mask = gic_mask_irq, |
| .irq_unmask = gic_unmask_irq, |
| .irq_eoi = gic_eoi_irq, |
| .irq_set_type = gic_set_type, |
| .irq_set_affinity = gic_set_affinity, |
| .irq_retrigger = gic_retrigger, |
| .irq_get_irqchip_state = gic_irq_get_irqchip_state, |
| .irq_set_irqchip_state = gic_irq_set_irqchip_state, |
| .irq_nmi_setup = gic_irq_nmi_setup, |
| .irq_nmi_teardown = gic_irq_nmi_teardown, |
| .ipi_send_mask = gic_ipi_send_mask, |
| .flags = IRQCHIP_SET_TYPE_MASKED | |
| IRQCHIP_SKIP_SET_WAKE | |
| IRQCHIP_MASK_ON_SUSPEND, |
| }; |
| |
| static struct irq_chip gic_eoimode1_chip = { |
| .name = "GICv3", |
| .irq_mask = gic_eoimode1_mask_irq, |
| .irq_unmask = gic_unmask_irq, |
| .irq_eoi = gic_eoimode1_eoi_irq, |
| .irq_set_type = gic_set_type, |
| .irq_set_affinity = gic_set_affinity, |
| .irq_retrigger = gic_retrigger, |
| .irq_get_irqchip_state = gic_irq_get_irqchip_state, |
| .irq_set_irqchip_state = gic_irq_set_irqchip_state, |
| .irq_set_vcpu_affinity = gic_irq_set_vcpu_affinity, |
| .irq_nmi_setup = gic_irq_nmi_setup, |
| .irq_nmi_teardown = gic_irq_nmi_teardown, |
| .ipi_send_mask = gic_ipi_send_mask, |
| .flags = IRQCHIP_SET_TYPE_MASKED | |
| IRQCHIP_SKIP_SET_WAKE | |
| IRQCHIP_MASK_ON_SUSPEND, |
| }; |
| |
| static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq, |
| irq_hw_number_t hw) |
| { |
| struct irq_chip *chip = &gic_chip; |
| struct irq_data *irqd = irq_desc_get_irq_data(irq_to_desc(irq)); |
| |
| if (static_branch_likely(&supports_deactivate_key)) |
| chip = &gic_eoimode1_chip; |
| |
| switch (__get_intid_range(hw)) { |
| case SGI_RANGE: |
| case PPI_RANGE: |
| case EPPI_RANGE: |
| irq_set_percpu_devid(irq); |
| irq_domain_set_info(d, irq, hw, chip, d->host_data, |
| handle_percpu_devid_irq, NULL, NULL); |
| break; |
| |
| case SPI_RANGE: |
| case ESPI_RANGE: |
| irq_domain_set_info(d, irq, hw, chip, d->host_data, |
| handle_fasteoi_irq, NULL, NULL); |
| irq_set_probe(irq); |
| irqd_set_single_target(irqd); |
| break; |
| |
| case LPI_RANGE: |
| if (!gic_dist_supports_lpis()) |
| return -EPERM; |
| irq_domain_set_info(d, irq, hw, chip, d->host_data, |
| handle_fasteoi_irq, NULL, NULL); |
| break; |
| |
| default: |
| return -EPERM; |
| } |
| |
| /* Prevents SW retriggers which mess up the ACK/EOI ordering */ |
| irqd_set_handle_enforce_irqctx(irqd); |
| return 0; |
| } |
| |
| static int gic_irq_domain_translate(struct irq_domain *d, |
| struct irq_fwspec *fwspec, |
| unsigned long *hwirq, |
| unsigned int *type) |
| { |
| if (fwspec->param_count == 1 && fwspec->param[0] < 16) { |
| *hwirq = fwspec->param[0]; |
| *type = IRQ_TYPE_EDGE_RISING; |
| return 0; |
| } |
| |
| if (is_of_node(fwspec->fwnode)) { |
| if (fwspec->param_count < 3) |
| return -EINVAL; |
| |
| switch (fwspec->param[0]) { |
| case 0: /* SPI */ |
| *hwirq = fwspec->param[1] + 32; |
| break; |
| case 1: /* PPI */ |
| *hwirq = fwspec->param[1] + 16; |
| break; |
| case 2: /* ESPI */ |
| *hwirq = fwspec->param[1] + ESPI_BASE_INTID; |
| break; |
| case 3: /* EPPI */ |
| *hwirq = fwspec->param[1] + EPPI_BASE_INTID; |
| break; |
| case GIC_IRQ_TYPE_LPI: /* LPI */ |
| *hwirq = fwspec->param[1]; |
| break; |
| case GIC_IRQ_TYPE_PARTITION: |
| *hwirq = fwspec->param[1]; |
| if (fwspec->param[1] >= 16) |
| *hwirq += EPPI_BASE_INTID - 16; |
| else |
| *hwirq += 16; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| *type = fwspec->param[2] & IRQ_TYPE_SENSE_MASK; |
| |
| /* |
| * Make it clear that broken DTs are... broken. |
| * Partitioned PPIs are an unfortunate exception. |
| */ |
| WARN_ON(*type == IRQ_TYPE_NONE && |
| fwspec->param[0] != GIC_IRQ_TYPE_PARTITION); |
| return 0; |
| } |
| |
| if (is_fwnode_irqchip(fwspec->fwnode)) { |
| if(fwspec->param_count != 2) |
| return -EINVAL; |
| |
| if (fwspec->param[0] < 16) { |
| pr_err(FW_BUG "Illegal GSI%d translation request\n", |
| fwspec->param[0]); |
| return -EINVAL; |
| } |
| |
| *hwirq = fwspec->param[0]; |
| *type = fwspec->param[1]; |
| |
| WARN_ON(*type == IRQ_TYPE_NONE); |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int gic_irq_domain_alloc(struct irq_domain *domain, unsigned int virq, |
| unsigned int nr_irqs, void *arg) |
| { |
| int i, ret; |
| irq_hw_number_t hwirq; |
| unsigned int type = IRQ_TYPE_NONE; |
| struct irq_fwspec *fwspec = arg; |
| |
| ret = gic_irq_domain_translate(domain, fwspec, &hwirq, &type); |
| if (ret) |
| return ret; |
| |
| for (i = 0; i < nr_irqs; i++) { |
| ret = gic_irq_domain_map(domain, virq + i, hwirq + i); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void gic_irq_domain_free(struct irq_domain *domain, unsigned int virq, |
| unsigned int nr_irqs) |
| { |
| int i; |
| |
| for (i = 0; i < nr_irqs; i++) { |
| struct irq_data *d = irq_domain_get_irq_data(domain, virq + i); |
| irq_set_handler(virq + i, NULL); |
| irq_domain_reset_irq_data(d); |
| } |
| } |
| |
| static bool fwspec_is_partitioned_ppi(struct irq_fwspec *fwspec, |
| irq_hw_number_t hwirq) |
| { |
| enum gic_intid_range range; |
| |
| if (!gic_data.ppi_descs) |
| return false; |
| |
| if (!is_of_node(fwspec->fwnode)) |
| return false; |
| |
| if (fwspec->param_count < 4 || !fwspec->param[3]) |
| return false; |
| |
| range = __get_intid_range(hwirq); |
| if (range != PPI_RANGE && range != EPPI_RANGE) |
| return false; |
| |
| return true; |
| } |
| |
| static int gic_irq_domain_select(struct irq_domain *d, |
| struct irq_fwspec *fwspec, |
| enum irq_domain_bus_token bus_token) |
| { |
| unsigned int type, ret, ppi_idx; |
| irq_hw_number_t hwirq; |
| |
| /* Not for us */ |
| if (fwspec->fwnode != d->fwnode) |
| return 0; |
| |
| /* If this is not DT, then we have a single domain */ |
| if (!is_of_node(fwspec->fwnode)) |
| return 1; |
| |
| ret = gic_irq_domain_translate(d, fwspec, &hwirq, &type); |
| if (WARN_ON_ONCE(ret)) |
| return 0; |
| |
| if (!fwspec_is_partitioned_ppi(fwspec, hwirq)) |
| return d == gic_data.domain; |
| |
| /* |
| * If this is a PPI and we have a 4th (non-null) parameter, |
| * then we need to match the partition domain. |
| */ |
| ppi_idx = __gic_get_ppi_index(hwirq); |
| return d == partition_get_domain(gic_data.ppi_descs[ppi_idx]); |
| } |
| |
| static const struct irq_domain_ops gic_irq_domain_ops = { |
| .translate = gic_irq_domain_translate, |
| .alloc = gic_irq_domain_alloc, |
| .free = gic_irq_domain_free, |
| .select = gic_irq_domain_select, |
| }; |
| |
| static int partition_domain_translate(struct irq_domain *d, |
| struct irq_fwspec *fwspec, |
| unsigned long *hwirq, |
| unsigned int *type) |
| { |
| unsigned long ppi_intid; |
| struct device_node *np; |
| unsigned int ppi_idx; |
| int ret; |
| |
| if (!gic_data.ppi_descs) |
| return -ENOMEM; |
| |
| np = of_find_node_by_phandle(fwspec->param[3]); |
| if (WARN_ON(!np)) |
| return -EINVAL; |
| |
| ret = gic_irq_domain_translate(d, fwspec, &ppi_intid, type); |
| if (WARN_ON_ONCE(ret)) |
| return 0; |
| |
| ppi_idx = __gic_get_ppi_index(ppi_intid); |
| ret = partition_translate_id(gic_data.ppi_descs[ppi_idx], |
| of_node_to_fwnode(np)); |
| if (ret < 0) |
| return ret; |
| |
| *hwirq = ret; |
| *type = fwspec->param[2] & IRQ_TYPE_SENSE_MASK; |
| |
| return 0; |
| } |
| |
| static const struct irq_domain_ops partition_domain_ops = { |
| .translate = partition_domain_translate, |
| .select = gic_irq_domain_select, |
| }; |
| |
| static bool gic_enable_quirk_msm8996(void *data) |
| { |
| struct gic_chip_data *d = data; |
| |
| d->flags |= FLAGS_WORKAROUND_GICR_WAKER_MSM8996; |
| |
| return true; |
| } |
| |
| static bool gic_enable_quirk_cavium_38539(void *data) |
| { |
| struct gic_chip_data *d = data; |
| |
| d->flags |= FLAGS_WORKAROUND_CAVIUM_ERRATUM_38539; |
| |
| return true; |
| } |
| |
| static bool gic_enable_quirk_hip06_07(void *data) |
| { |
| struct gic_chip_data *d = data; |
| |
| /* |
| * HIP06 GICD_IIDR clashes with GIC-600 product number (despite |
| * not being an actual ARM implementation). The saving grace is |
| * that GIC-600 doesn't have ESPI, so nothing to do in that case. |
| * HIP07 doesn't even have a proper IIDR, and still pretends to |
| * have ESPI. In both cases, put them right. |
| */ |
| if (d->rdists.gicd_typer & GICD_TYPER_ESPI) { |
| /* Zero both ESPI and the RES0 field next to it... */ |
| d->rdists.gicd_typer &= ~GENMASK(9, 8); |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static const struct gic_quirk gic_quirks[] = { |
| { |
| .desc = "GICv3: Qualcomm MSM8996 broken firmware", |
| .compatible = "qcom,msm8996-gic-v3", |
| .init = gic_enable_quirk_msm8996, |
| }, |
| { |
| .desc = "GICv3: HIP06 erratum 161010803", |
| .iidr = 0x0204043b, |
| .mask = 0xffffffff, |
| .init = gic_enable_quirk_hip06_07, |
| }, |
| { |
| .desc = "GICv3: HIP07 erratum 161010803", |
| .iidr = 0x00000000, |
| .mask = 0xffffffff, |
| .init = gic_enable_quirk_hip06_07, |
| }, |
| { |
| /* |
| * Reserved register accesses generate a Synchronous |
| * External Abort. This erratum applies to: |
| * - ThunderX: CN88xx |
| * - OCTEON TX: CN83xx, CN81xx |
| * - OCTEON TX2: CN93xx, CN96xx, CN98xx, CNF95xx* |
| */ |
| .desc = "GICv3: Cavium erratum 38539", |
| .iidr = 0xa000034c, |
| .mask = 0xe8f00fff, |
| .init = gic_enable_quirk_cavium_38539, |
| }, |
| { |
| } |
| }; |
| |
| static void gic_enable_nmi_support(void) |
| { |
| int i; |
| |
| if (!gic_prio_masking_enabled()) |
| return; |
| |
| ppi_nmi_refs = kcalloc(gic_data.ppi_nr, sizeof(*ppi_nmi_refs), GFP_KERNEL); |
| if (!ppi_nmi_refs) |
| return; |
| |
| for (i = 0; i < gic_data.ppi_nr; i++) |
| refcount_set(&ppi_nmi_refs[i], 0); |
| |
| /* |
| * Linux itself doesn't use 1:N distribution, so has no need to |
| * set PMHE. The only reason to have it set is if EL3 requires it |
| * (and we can't change it). |
| */ |
| if (gic_read_ctlr() & ICC_CTLR_EL1_PMHE_MASK) |
| static_branch_enable(&gic_pmr_sync); |
| |
| pr_info("Pseudo-NMIs enabled using %s ICC_PMR_EL1 synchronisation\n", |
| static_branch_unlikely(&gic_pmr_sync) ? "forced" : "relaxed"); |
| |
| /* |
| * How priority values are used by the GIC depends on two things: |
| * the security state of the GIC (controlled by the GICD_CTRL.DS bit) |
| * and if Group 0 interrupts can be delivered to Linux in the non-secure |
| * world as FIQs (controlled by the SCR_EL3.FIQ bit). These affect the |
| * the ICC_PMR_EL1 register and the priority that software assigns to |
| * interrupts: |
| * |
| * GICD_CTRL.DS | SCR_EL3.FIQ | ICC_PMR_EL1 | Group 1 priority |
| * ----------------------------------------------------------- |
| * 1 | - | unchanged | unchanged |
| * ----------------------------------------------------------- |
| * 0 | 1 | non-secure | non-secure |
| * ----------------------------------------------------------- |
| * 0 | 0 | unchanged | non-secure |
| * |
| * where non-secure means that the value is right-shifted by one and the |
| * MSB bit set, to make it fit in the non-secure priority range. |
| * |
| * In the first two cases, where ICC_PMR_EL1 and the interrupt priority |
| * are both either modified or unchanged, we can use the same set of |
| * priorities. |
| * |
| * In the last case, where only the interrupt priorities are modified to |
| * be in the non-secure range, we use a different PMR value to mask IRQs |
| * and the rest of the values that we use remain unchanged. |
| */ |
| if (gic_has_group0() && !gic_dist_security_disabled()) |
| static_branch_enable(&gic_nonsecure_priorities); |
| |
| static_branch_enable(&supports_pseudo_nmis); |
| |
| if (static_branch_likely(&supports_deactivate_key)) |
| gic_eoimode1_chip.flags |= IRQCHIP_SUPPORTS_NMI; |
| else |
| gic_chip.flags |= IRQCHIP_SUPPORTS_NMI; |
| } |
| |
| static int __init gic_init_bases(void __iomem *dist_base, |
| struct redist_region *rdist_regs, |
| u32 nr_redist_regions, |
| u64 redist_stride, |
| struct fwnode_handle *handle) |
| { |
| u32 typer; |
| int err; |
| |
| if (!is_hyp_mode_available()) |
| static_branch_disable(&supports_deactivate_key); |
| |
| if (static_branch_likely(&supports_deactivate_key)) |
| pr_info("GIC: Using split EOI/Deactivate mode\n"); |
| |
| gic_data.fwnode = handle; |
| gic_data.dist_base = dist_base; |
| gic_data.redist_regions = rdist_regs; |
| gic_data.nr_redist_regions = nr_redist_regions; |
| gic_data.redist_stride = redist_stride; |
| |
| /* |
| * Find out how many interrupts are supported. |
| */ |
| typer = readl_relaxed(gic_data.dist_base + GICD_TYPER); |
| gic_data.rdists.gicd_typer = typer; |
| |
| gic_enable_quirks(readl_relaxed(gic_data.dist_base + GICD_IIDR), |
| gic_quirks, &gic_data); |
| |
| pr_info("%d SPIs implemented\n", GIC_LINE_NR - 32); |
| pr_info("%d Extended SPIs implemented\n", GIC_ESPI_NR); |
| |
| /* |
| * ThunderX1 explodes on reading GICD_TYPER2, in violation of the |
| * architecture spec (which says that reserved registers are RES0). |
| */ |
| if (!(gic_data.flags & FLAGS_WORKAROUND_CAVIUM_ERRATUM_38539)) |
| gic_data.rdists.gicd_typer2 = readl_relaxed(gic_data.dist_base + GICD_TYPER2); |
| |
| gic_data.domain = irq_domain_create_tree(handle, &gic_irq_domain_ops, |
| &gic_data); |
| gic_data.rdists.rdist = alloc_percpu(typeof(*gic_data.rdists.rdist)); |
| gic_data.rdists.has_rvpeid = true; |
| gic_data.rdists.has_vlpis = true; |
| gic_data.rdists.has_direct_lpi = true; |
| gic_data.rdists.has_vpend_valid_dirty = true; |
| |
| if (WARN_ON(!gic_data.domain) || WARN_ON(!gic_data.rdists.rdist)) { |
| err = -ENOMEM; |
| goto out_free; |
| } |
| |
| irq_domain_update_bus_token(gic_data.domain, DOMAIN_BUS_WIRED); |
| |
| gic_data.has_rss = !!(typer & GICD_TYPER_RSS); |
| pr_info("Distributor has %sRange Selector support\n", |
| gic_data.has_rss ? "" : "no "); |
| |
| if (typer & GICD_TYPER_MBIS) { |
| err = mbi_init(handle, gic_data.domain); |
| if (err) |
| pr_err("Failed to initialize MBIs\n"); |
| } |
| |
| set_handle_irq(gic_handle_irq); |
| |
| gic_update_rdist_properties(); |
| |
| gic_dist_init(); |
| gic_cpu_init(); |
| gic_smp_init(); |
| gic_cpu_pm_init(); |
| |
| if (gic_dist_supports_lpis()) { |
| its_init(handle, &gic_data.rdists, gic_data.domain); |
| its_cpu_init(); |
| } else { |
| if (IS_ENABLED(CONFIG_ARM_GIC_V2M)) |
| gicv2m_init(handle, gic_data.domain); |
| } |
| |
| gic_enable_nmi_support(); |
| |
| return 0; |
| |
| out_free: |
| if (gic_data.domain) |
| irq_domain_remove(gic_data.domain); |
| free_percpu(gic_data.rdists.rdist); |
| return err; |
| } |
| |
| static int __init gic_validate_dist_version(void __iomem *dist_base) |
| { |
| u32 reg = readl_relaxed(dist_base + GICD_PIDR2) & GIC_PIDR2_ARCH_MASK; |
| |
| if (reg != GIC_PIDR2_ARCH_GICv3 && reg != GIC_PIDR2_ARCH_GICv4) |
| return -ENODEV; |
| |
| return 0; |
| } |
| |
| /* Create all possible partitions at boot time */ |
| static void __init gic_populate_ppi_partitions(struct device_node *gic_node) |
| { |
| struct device_node *parts_node, *child_part; |
| int part_idx = 0, i; |
| int nr_parts; |
| struct partition_affinity *parts; |
| |
| parts_node = of_get_child_by_name(gic_node, "ppi-partitions"); |
| if (!parts_node) |
| return; |
| |
| gic_data.ppi_descs = kcalloc(gic_data.ppi_nr, sizeof(*gic_data.ppi_descs), GFP_KERNEL); |
| if (!gic_data.ppi_descs) |
| goto out_put_node; |
| |
| nr_parts = of_get_child_count(parts_node); |
| |
| if (!nr_parts) |
| goto out_put_node; |
| |
| parts = kcalloc(nr_parts, sizeof(*parts), GFP_KERNEL); |
| if (WARN_ON(!parts)) |
| goto out_put_node; |
| |
| for_each_child_of_node(parts_node, child_part) { |
| struct partition_affinity *part; |
| int n; |
| |
| part = &parts[part_idx]; |
| |
| part->partition_id = of_node_to_fwnode(child_part); |
| |
| pr_info("GIC: PPI partition %pOFn[%d] { ", |
| child_part, part_idx); |
| |
| n = of_property_count_elems_of_size(child_part, "affinity", |
| sizeof(u32)); |
| WARN_ON(n <= 0); |
| |
| for (i = 0; i < n; i++) { |
| int err, cpu; |
| u32 cpu_phandle; |
| struct device_node *cpu_node; |
| |
| err = of_property_read_u32_index(child_part, "affinity", |
| i, &cpu_phandle); |
| if (WARN_ON(err)) |
| continue; |
| |
| cpu_node = of_find_node_by_phandle(cpu_phandle); |
| if (WARN_ON(!cpu_node)) |
| continue; |
| |
| cpu = of_cpu_node_to_id(cpu_node); |
| if (WARN_ON(cpu < 0)) { |
| of_node_put(cpu_node); |
| continue; |
| } |
| |
| pr_cont("%pOF[%d] ", cpu_node, cpu); |
| |
| cpumask_set_cpu(cpu, &part->mask); |
| of_node_put(cpu_node); |
| } |
| |
| pr_cont("}\n"); |
| part_idx++; |
| } |
| |
| for (i = 0; i < gic_data.ppi_nr; i++) { |
| unsigned int irq; |
| struct partition_desc *desc; |
| struct irq_fwspec ppi_fwspec = { |
| .fwnode = gic_data.fwnode, |
| .param_count = 3, |
| .param = { |
| [0] = GIC_IRQ_TYPE_PARTITION, |
| [1] = i, |
| [2] = IRQ_TYPE_NONE, |
| }, |
| }; |
| |
| irq = irq_create_fwspec_mapping(&ppi_fwspec); |
| if (WARN_ON(!irq)) |
| continue; |
| desc = partition_create_desc(gic_data.fwnode, parts, nr_parts, |
| irq, &partition_domain_ops); |
| if (WARN_ON(!desc)) |
| continue; |
| |
| gic_data.ppi_descs[i] = desc; |
| } |
| |
| out_put_node: |
| of_node_put(parts_node); |
| } |
| |
| static void __init gic_of_setup_kvm_info(struct device_node *node) |
| { |
| int ret; |
| struct resource r; |
| u32 gicv_idx; |
| |
| gic_v3_kvm_info.type = GIC_V3; |
| |
| gic_v3_kvm_info.maint_irq = irq_of_parse_and_map(node, 0); |
| if (!gic_v3_kvm_info.maint_irq) |
| return; |
| |
| if (of_property_read_u32(node, "#redistributor-regions", |
| &gicv_idx)) |
| gicv_idx = 1; |
| |
| gicv_idx += 3; /* Also skip GICD, GICC, GICH */ |
| ret = of_address_to_resource(node, gicv_idx, &r); |
| if (!ret) |
| gic_v3_kvm_info.vcpu = r; |
| |
| gic_v3_kvm_info.has_v4 = gic_data.rdists.has_vlpis; |
| gic_v3_kvm_info.has_v4_1 = gic_data.rdists.has_rvpeid; |
| vgic_set_kvm_info(&gic_v3_kvm_info); |
| } |
| |
| static int __init gic_of_init(struct device_node *node, struct device_node *parent) |
| { |
| void __iomem *dist_base; |
| struct redist_region *rdist_regs; |
| u64 redist_stride; |
| u32 nr_redist_regions; |
| int err, i; |
| |
| dist_base = of_iomap(node, 0); |
| if (!dist_base) { |
| pr_err("%pOF: unable to map gic dist registers\n", node); |
| return -ENXIO; |
| } |
| |
| err = gic_validate_dist_version(dist_base); |
| if (err) { |
| pr_err("%pOF: no distributor detected, giving up\n", node); |
| goto out_unmap_dist; |
| } |
| |
| if (of_property_read_u32(node, "#redistributor-regions", &nr_redist_regions)) |
| nr_redist_regions = 1; |
| |
| rdist_regs = kcalloc(nr_redist_regions, sizeof(*rdist_regs), |
| GFP_KERNEL); |
| if (!rdist_regs) { |
| err = -ENOMEM; |
| goto out_unmap_dist; |
| } |
| |
| for (i = 0; i < nr_redist_regions; i++) { |
| struct resource res; |
| int ret; |
| |
| ret = of_address_to_resource(node, 1 + i, &res); |
| rdist_regs[i].redist_base = of_iomap(node, 1 + i); |
| if (ret || !rdist_regs[i].redist_base) { |
| pr_err("%pOF: couldn't map region %d\n", node, i); |
| err = -ENODEV; |
| goto out_unmap_rdist; |
| } |
| rdist_regs[i].phys_base = res.start; |
| } |
| |
| if (of_property_read_u64(node, "redistributor-stride", &redist_stride)) |
| redist_stride = 0; |
| |
| gic_enable_of_quirks(node, gic_quirks, &gic_data); |
| |
| err = gic_init_bases(dist_base, rdist_regs, nr_redist_regions, |
| redist_stride, &node->fwnode); |
| if (err) |
| goto out_unmap_rdist; |
| |
| gic_populate_ppi_partitions(node); |
| |
| if (static_branch_likely(&supports_deactivate_key)) |
| gic_of_setup_kvm_info(node); |
| return 0; |
| |
| out_unmap_rdist: |
| for (i = 0; i < nr_redist_regions; i++) |
| if (rdist_regs[i].redist_base) |
| iounmap(rdist_regs[i].redist_base); |
| kfree(rdist_regs); |
| out_unmap_dist: |
| iounmap(dist_base); |
| return err; |
| } |
| |
| IRQCHIP_DECLARE(gic_v3, "arm,gic-v3", gic_of_init); |
| |
| #ifdef CONFIG_ACPI |
| static struct |
| { |
| void __iomem *dist_base; |
| struct redist_region *redist_regs; |
| u32 nr_redist_regions; |
| bool single_redist; |
| int enabled_rdists; |
| u32 maint_irq; |
| int maint_irq_mode; |
| phys_addr_t vcpu_base; |
| } acpi_data __initdata; |
| |
| static void __init |
| gic_acpi_register_redist(phys_addr_t phys_base, void __iomem *redist_base) |
| { |
| static int count = 0; |
| |
| acpi_data.redist_regs[count].phys_base = phys_base; |
| acpi_data.redist_regs[count].redist_base = redist_base; |
| acpi_data.redist_regs[count].single_redist = acpi_data.single_redist; |
| count++; |
| } |
| |
| static int __init |
| gic_acpi_parse_madt_redist(union acpi_subtable_headers *header, |
| const unsigned long end) |
| { |
| struct acpi_madt_generic_redistributor *redist = |
| (struct acpi_madt_generic_redistributor *)header; |
| void __iomem *redist_base; |
| |
| redist_base = ioremap(redist->base_address, redist->length); |
| if (!redist_base) { |
| pr_err("Couldn't map GICR region @%llx\n", redist->base_address); |
| return -ENOMEM; |
| } |
| |
| gic_acpi_register_redist(redist->base_address, redist_base); |
| return 0; |
| } |
| |
| static int __init |
| gic_acpi_parse_madt_gicc(union acpi_subtable_headers *header, |
| const unsigned long end) |
| { |
| struct acpi_madt_generic_interrupt *gicc = |
| (struct acpi_madt_generic_interrupt *)header; |
| u32 reg = readl_relaxed(acpi_data.dist_base + GICD_PIDR2) & GIC_PIDR2_ARCH_MASK; |
| u32 size = reg == GIC_PIDR2_ARCH_GICv4 ? SZ_64K * 4 : SZ_64K * 2; |
| void __iomem *redist_base; |
| |
| /* GICC entry which has !ACPI_MADT_ENABLED is not unusable so skip */ |
| if (!(gicc->flags & ACPI_MADT_ENABLED)) |
| return 0; |
| |
| redist_base = ioremap(gicc->gicr_base_address, size); |
| if (!redist_base) |
| return -ENOMEM; |
| |
| gic_acpi_register_redist(gicc->gicr_base_address, redist_base); |
| return 0; |
| } |
| |
| static int __init gic_acpi_collect_gicr_base(void) |
| { |
| acpi_tbl_entry_handler redist_parser; |
| enum acpi_madt_type type; |
| |
| if (acpi_data.single_redist) { |
| type = ACPI_MADT_TYPE_GENERIC_INTERRUPT; |
| redist_parser = gic_acpi_parse_madt_gicc; |
| } else { |
| type = ACPI_MADT_TYPE_GENERIC_REDISTRIBUTOR; |
| redist_parser = gic_acpi_parse_madt_redist; |
| } |
| |
| /* Collect redistributor base addresses in GICR entries */ |
| if (acpi_table_parse_madt(type, redist_parser, 0) > 0) |
| return 0; |
| |
| pr_info("No valid GICR entries exist\n"); |
| return -ENODEV; |
| } |
| |
| static int __init gic_acpi_match_gicr(union acpi_subtable_headers *header, |
| const unsigned long end) |
| { |
| /* Subtable presence means that redist exists, that's it */ |
| return 0; |
| } |
| |
| static int __init gic_acpi_match_gicc(union acpi_subtable_headers *header, |
| const unsigned long end) |
| { |
| struct acpi_madt_generic_interrupt *gicc = |
| (struct acpi_madt_generic_interrupt *)header; |
| |
| /* |
| * If GICC is enabled and has valid gicr base address, then it means |
| * GICR base is presented via GICC |
| */ |
| if ((gicc->flags & ACPI_MADT_ENABLED) && gicc->gicr_base_address) { |
| acpi_data.enabled_rdists++; |
| return 0; |
| } |
| |
| /* |
| * It's perfectly valid firmware can pass disabled GICC entry, driver |
| * should not treat as errors, skip the entry instead of probe fail. |
| */ |
| if (!(gicc->flags & ACPI_MADT_ENABLED)) |
| return 0; |
| |
| return -ENODEV; |
| } |
| |
| static int __init gic_acpi_count_gicr_regions(void) |
| { |
| int count; |
| |
| /* |
| * Count how many redistributor regions we have. It is not allowed |
| * to mix redistributor description, GICR and GICC subtables have to be |
| * mutually exclusive. |
| */ |
| count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_REDISTRIBUTOR, |
| gic_acpi_match_gicr, 0); |
| if (count > 0) { |
| acpi_data.single_redist = false; |
| return count; |
| } |
| |
| count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_INTERRUPT, |
| gic_acpi_match_gicc, 0); |
| if (count > 0) { |
| acpi_data.single_redist = true; |
| count = acpi_data.enabled_rdists; |
| } |
| |
| return count; |
| } |
| |
| static bool __init acpi_validate_gic_table(struct acpi_subtable_header *header, |
| struct acpi_probe_entry *ape) |
| { |
| struct acpi_madt_generic_distributor *dist; |
| int count; |
| |
| dist = (struct acpi_madt_generic_distributor *)header; |
| if (dist->version != ape->driver_data) |
| return false; |
| |
| /* We need to do that exercise anyway, the sooner the better */ |
| count = gic_acpi_count_gicr_regions(); |
| if (count <= 0) |
| return false; |
| |
| acpi_data.nr_redist_regions = count; |
| return true; |
| } |
| |
| static int __init gic_acpi_parse_virt_madt_gicc(union acpi_subtable_headers *header, |
| const unsigned long end) |
| { |
| struct acpi_madt_generic_interrupt *gicc = |
| (struct acpi_madt_generic_interrupt *)header; |
| int maint_irq_mode; |
| static int first_madt = true; |
| |
| /* Skip unusable CPUs */ |
| if (!(gicc->flags & ACPI_MADT_ENABLED)) |
| return 0; |
| |
| maint_irq_mode = (gicc->flags & ACPI_MADT_VGIC_IRQ_MODE) ? |
| ACPI_EDGE_SENSITIVE : ACPI_LEVEL_SENSITIVE; |
| |
| if (first_madt) { |
| first_madt = false; |
| |
| acpi_data.maint_irq = gicc->vgic_interrupt; |
| acpi_data.maint_irq_mode = maint_irq_mode; |
| acpi_data.vcpu_base = gicc->gicv_base_address; |
| |
| return 0; |
| } |
| |
| /* |
| * The maintenance interrupt and GICV should be the same for every CPU |
| */ |
| if ((acpi_data.maint_irq != gicc->vgic_interrupt) || |
| (acpi_data.maint_irq_mode != maint_irq_mode) || |
| (acpi_data.vcpu_base != gicc->gicv_base_address)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static bool __init gic_acpi_collect_virt_info(void) |
| { |
| int count; |
| |
| count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_INTERRUPT, |
| gic_acpi_parse_virt_madt_gicc, 0); |
| |
| return (count > 0); |
| } |
| |
| #define ACPI_GICV3_DIST_MEM_SIZE (SZ_64K) |
| #define ACPI_GICV2_VCTRL_MEM_SIZE (SZ_4K) |
| #define ACPI_GICV2_VCPU_MEM_SIZE (SZ_8K) |
| |
| static void __init gic_acpi_setup_kvm_info(void) |
| { |
| int irq; |
| |
| if (!gic_acpi_collect_virt_info()) { |
| pr_warn("Unable to get hardware information used for virtualization\n"); |
| return; |
| } |
| |
| gic_v3_kvm_info.type = GIC_V3; |
| |
| irq = acpi_register_gsi(NULL, acpi_data.maint_irq, |
| acpi_data.maint_irq_mode, |
| ACPI_ACTIVE_HIGH); |
| if (irq <= 0) |
| return; |
| |
| gic_v3_kvm_info.maint_irq = irq; |
| |
| if (acpi_data.vcpu_base) { |
| struct resource *vcpu = &gic_v3_kvm_info.vcpu; |
| |
| vcpu->flags = IORESOURCE_MEM; |
| vcpu->start = acpi_data.vcpu_base; |
| vcpu->end = vcpu->start + ACPI_GICV2_VCPU_MEM_SIZE - 1; |
| } |
| |
| gic_v3_kvm_info.has_v4 = gic_data.rdists.has_vlpis; |
| gic_v3_kvm_info.has_v4_1 = gic_data.rdists.has_rvpeid; |
| vgic_set_kvm_info(&gic_v3_kvm_info); |
| } |
| |
| static int __init |
| gic_acpi_init(union acpi_subtable_headers *header, const unsigned long end) |
| { |
| struct acpi_madt_generic_distributor *dist; |
| struct fwnode_handle *domain_handle; |
| size_t size; |
| int i, err; |
| |
| /* Get distributor base address */ |
| dist = (struct acpi_madt_generic_distributor *)header; |
| acpi_data.dist_base = ioremap(dist->base_address, |
| ACPI_GICV3_DIST_MEM_SIZE); |
| if (!acpi_data.dist_base) { |
| pr_err("Unable to map GICD registers\n"); |
| return -ENOMEM; |
| } |
| |
| err = gic_validate_dist_version(acpi_data.dist_base); |
| if (err) { |
| pr_err("No distributor detected at @%p, giving up\n", |
| acpi_data.dist_base); |
| goto out_dist_unmap; |
| } |
| |
| size = sizeof(*acpi_data.redist_regs) * acpi_data.nr_redist_regions; |
| acpi_data.redist_regs = kzalloc(size, GFP_KERNEL); |
| if (!acpi_data.redist_regs) { |
| err = -ENOMEM; |
| goto out_dist_unmap; |
| } |
| |
| err = gic_acpi_collect_gicr_base(); |
| if (err) |
| goto out_redist_unmap; |
| |
| domain_handle = irq_domain_alloc_fwnode(&dist->base_address); |
| if (!domain_handle) { |
| err = -ENOMEM; |
| goto out_redist_unmap; |
| } |
| |
| err = gic_init_bases(acpi_data.dist_base, acpi_data.redist_regs, |
| acpi_data.nr_redist_regions, 0, domain_handle); |
| if (err) |
| goto out_fwhandle_free; |
| |
| acpi_set_irq_model(ACPI_IRQ_MODEL_GIC, domain_handle); |
| |
| if (static_branch_likely(&supports_deactivate_key)) |
| gic_acpi_setup_kvm_info(); |
| |
| return 0; |
| |
| out_fwhandle_free: |
| irq_domain_free_fwnode(domain_handle); |
| out_redist_unmap: |
| for (i = 0; i < acpi_data.nr_redist_regions; i++) |
| if (acpi_data.redist_regs[i].redist_base) |
| iounmap(acpi_data.redist_regs[i].redist_base); |
| kfree(acpi_data.redist_regs); |
| out_dist_unmap: |
| iounmap(acpi_data.dist_base); |
| return err; |
| } |
| IRQCHIP_ACPI_DECLARE(gic_v3, ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR, |
| acpi_validate_gic_table, ACPI_MADT_GIC_VERSION_V3, |
| gic_acpi_init); |
| IRQCHIP_ACPI_DECLARE(gic_v4, ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR, |
| acpi_validate_gic_table, ACPI_MADT_GIC_VERSION_V4, |
| gic_acpi_init); |
| IRQCHIP_ACPI_DECLARE(gic_v3_or_v4, ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR, |
| acpi_validate_gic_table, ACPI_MADT_GIC_VERSION_NONE, |
| gic_acpi_init); |
| #endif |