| Properties for Jedec JC-42.4 compatible temperature sensors |
| |
| Required properties: |
| - compatible: May include a device-specific string consisting of the |
| manufacturer and the name of the chip. A list of supported |
| chip names follows. |
| Must include "jedec,jc-42.4-temp" for any Jedec JC-42.4 |
| compatible temperature sensor. |
| |
| Supported chip names: |
| adi,adt7408 |
| atmel,at30ts00 |
| atmel,at30tse004 |
| onnn,cat6095 |
| onnn,cat34ts02 |
| maxim,max6604 |
| microchip,mcp9804 |
| microchip,mcp9805 |
| microchip,mcp9808 |
| microchip,mcp98243 |
| microchip,mcp98244 |
| microchip,mcp9843 |
| nxp,se97 |
| nxp,se98 |
| st,stts2002 |
| st,stts2004 |
| st,stts3000 |
| st,stts424 |
| st,stts424e |
| idt,tse2002 |
| idt,tse2004 |
| idt,ts3000 |
| idt,ts3001 |
| |
| - reg: I2C address |
| |
| Optional properties: |
| - smbus-timeout-disable: When set, the smbus timeout function will be disabled. |
| This is not supported on all chips. |
| |
| Example: |
| |
| temp-sensor@1a { |
| compatible = "jedec,jc-42.4-temp"; |
| reg = <0x1a>; |
| }; |
